Jump to content
Create New...

Chevrolet News:How Much Power Does The Chevrolet Malibu Turbo Deliver?


Recommended Posts


William Maley

Editor/Reporter - CheersandGears.com

March 8, 2012

General Motors has revealed the power ratings for the new 2.0L Ecotec turbo-four in the Malibu due out in the summer. The new 2.0L turbo-four will produce 259 HP and 260 lb-ft of torque. Peak torque is available from 1,700 to 5,500 RPM. When equipped with the turbo, the Malibu can reach 60 MPH in 6.3 Seconds.

Press Release is on Page 2


Power-Dense Powertrains Drive Malibu’s Global Rollout

Chevrolet midsize style and performance introduced to more than 70 countries this year

DETROIT – The all-new Ecotec 2.5L debuting on the 2013 Chevrolet Malibumidsize sedan this summer is one of the most-powerful naturally aspirated four-cylinder engines in the midsize segment, topping the output from the new Ford Fusion and Toyota Camry. It will be joined this fall by a new Ecotec 2.0L turbo engine, delivering more horsepower than any previous V-6 offered in a Malibu.

Malibu’s Ecotec 2.5L delivers an SAE-certified 197 horsepower (147 kW) and 191 lb.-ft. of torque (259 Nm) – the most torque of any naturally aspirated four-cylinder in the segment. And when compared with the competition, it delivers 19 more horsepower (14 kW) and 21 more lb.-ft. of torque (28 Nm) than the 2012 Toyota Camry LE’s 2.5L I4 engine, and 27 more horsepower (20 kW) and 21 more lb.-ft. (28 Nm) than the 2013 Ford Fusion’s 2.5L four-cylinder.

The Ecotec 2.0L turbo is SAE-certified at 259 horsepower (193 kW) and 260 lb.-ft. of torque (353 Nm). Its peak torque is sustained from 1,700 to 5,500 rpm – a broad range that provides an immediate feeling of power in all driving conditions and helps produce 0-60 performance in 6.3 seconds.

The new engines feature direct injection for increased fuel efficiency and higher power, and help drive Malibu’s performance around the world. Both will be offered in the United States, Canada, Israel and other markets, while rounding out a diverse North American powertrain lineup that also includes the segment-exclusive, fuel-saving eAssist™ technology in the Malibu Eco. It combines start-stop technology with regenerative braking and a lightweight lithium-ion battery to provide an electric boost in certain conditions, delivering a GM-estimated 25 mpg in the city 37 mpg on the highway. That’s better fuel economy than any non-hybrid midsize sedan currently available.

“The 2013 Malibu is the latest entry in Chevrolet’s growing global car portfolio, which has seen almost an entirely revamped lineup in the last 15 months,” said Chris Perry, global Chevrolet marketing vice president. “We sold 4.76 million Chevys worldwide in 2011 – one every 6.5 seconds – and the new Malibu will help us grow the brand globally even more this year, where it will be introduced for the first time in many markets.”

The 2013 Malibu is Chevrolet’s first global midsize sedan and will eventually be sold in nearly 100 countries on six continents. It is already on sale in South Korea and China, with sales to begin this year in more than 70 additional countries, including Canada, throughout Europe, Scandinavia, the Middle East, Africa and other Asia-Pacific markets.

In the United States, current generation Malibu sales are up 4.4 percent for the first two months of the year, building on 2011’s near-record U.S. sales of nearly 205,000.

The new Malibu was designed to be the most finely tuned Chevrolet midsize sedan ever and is built on an award-winning global architecture that helps deliver a more confident, responsive and connected driving experience. The body structure is 20-percent stiffer for a greater feeling of solidity, quietness and quality.

Inside, the 2013 Malibu delivers:

  • 1.5 inches (38 mm) more front shoulder room
  • 3.5 inches (89 mm) more rear shoulder room
  • 2.7 inches (68 mm) more front hip room
  • 2.8 inches (71 mm) more rear hip room
  • More than 1 cubic foot (28 liters) more trunk space
  • Nearly 4 cubic feet (113 liters) of additional EPA interior volume.

Malibu’s driving experience is also enhanced with Chevrolet MyLink, an all-new in-car infotainment package that gives customers a higher level of wireless connectivity and customized infotainment options while building on the safety and security of OnStar. MyLink is safe and easy to use. It adds stereo audio streaming and wireless control of smartphones, building on the voice-activated Bluetooth hands-free calling capability already offered in most Chevy vehicles. MyLink is standard in LT, LTZ and Eco Malibu models, along with a seven-inch, high-resolution, full-color touch screen display that makes media selection easy to navigate. The radio face also swivels up to reveal a hidden and illuminated storage area.

The Chevrolet Malibu Eco is on sale now and priced less than a full hybrid vehicle, with a suggested retail price of $25,995, including a $760 destination charge. Additional models go on sale this summer, followed by the Malibu Turbo this fall.


View full article

Link to comment
Share on other sites

shame they didn't add leg room to the car.........

turbo should be powerful enough, just too bad the numbers weren't a little better for the spec sheet shoppers.

They intentionally cut the rear leg room...shortened the wheelbase by about 5 inches. I looked at one closely at Barrett-Jackson in January, the rear door openings seem really tight...

Link to comment
Share on other sites

I finally got into a new Malibu. There is things I like better than ours and things I am not crazy about.The one I was in was an eco that in person really was not that thrilling in color or interior. after just driving a Regal turbo I would have a hard time buying the Malibu.

The sad part is I am not a Ford fan but the new Fusion is a looker inside and out. The price will be key on that one. It could really hurt the Malibu. It is not a case the Malibu is a bad car it just was not as good as I had hoped. I will wait to see a different color non Eco one to see it it will change my mind.

This 2.0 must be the new Eco Turbo II. With a non SS st this HP makes me wonder if we will soon see a boost to the GS and the hinted too SS. Could we be seeing a 300 HP turbo soon? A few others in this class are now just reaching over 300 HP.

Link to comment
Share on other sites

While this might not be a home run hit that some wanted, this Turbo and size will meet many families needs.

I for on would never consider this car as once I get in the front seat, no one can sit behind me. The shortness they did and tight rear will make it a challange for anyone 6' tall or taller.

Excited by the high output and the great gas mileage.

Link to comment
Share on other sites

As a matter of technical accuracy, there is no way peak torque can be 260 lb-ft and available from 1,700 rpm to 5,500 rpm. By definition, 260 lb-ft @ 5,500 = 272 hp @ 5,500 rpm. If max hp is 259, then torque at 5,500 rpm must be less than or equal to 247 lb-ft at that engine speed.

Link to comment
Share on other sites

As a matter of technical accuracy, there is no way peak torque can be 260 lb-ft and available from 1,700 rpm to 5,500 rpm. By definition, 260 lb-ft @ 5,500 = 272 hp @ 5,500 rpm. If max hp is 259, then torque at 5,500 rpm must be less than or equal to 247 lb-ft at that engine speed.

Remember that GM has a sneaky habit of pitching low HP numbers at first and then upgrading them. Kinda like how the LLT went from 304 to 312 hp without any engineering improvements whatsoever.

Link to comment
Share on other sites

I would assume the numbers are just fake press release marketing blather, but the 'SAE-certified' implies they are real...interesting, I didn't realize there was a correlation between hp, RPM, and torque....

Edited by Cubical-aka-Moltar
Link to comment
Share on other sites

I would assume the numbers are just fake press release marketing blather, but the 'SAE-certified' implies they are real...interesting, I didn't realize there was a correlation between hp, RPM, and torque....

Yea I really did not get the full grasp between the three either and in looking up online, there are many ways of this being explained but did find this site that seems to have one of the best explanations on this and it toally syncs with what diwightlooi mentions above.

Check it out: http://www.epi-eng.com/piston_engine_technology/power_and_torque.htm

Rock on Torque!!! :)

Link to comment
Share on other sites

I would assume the numbers are just fake press release marketing blather, but the 'SAE-certified' implies they are real...interesting, I didn't realize there was a correlation between hp, RPM, and torque....

Yea I really did not get the full grasp between the three either and in looking up online, there are many ways of this being explained but did find this site that seems to have one of the best explanations on this and it toally syncs with what diwightlooi mentions above.

Check it out: http://www.epi-eng.c..._and_torque.htm

Rock on Torque!!! :)

After thinking about it, that was probably one of those formulas I learned in high school AP Physics 25 years ago but haven't used since then...

Link to comment
Share on other sites

A simple way to look at it is that an engine produces torque. Torque is measure in Foot-Pounds. A Foot-Pound is exactly that -- the amount of twisting force you will experience if you hang a 1 pound weight off a 1 foot long crank. Horsepower is simply Torque x RPM divided by 5252. It is a measurement of the rate of application of torque.

Let's say a hand crank produces constant 1 foot-pound of torque. One that is being turned at 20 rpm is twice as "powerful" as doing so at 10 rpm. Why? Because you are applying that 1 foot-pound of torque at with twice the number of repetitions over a given amount of time.

The amount of torque an engine is capable of producing is described by the torque curve. At every point along that curve it maps to a horsepower figure equivalent to the torque at that point times the rpm at that point divided by 5252. At 5252 rpm, torque and horsepower is exactly the same figure. At engine speed above 5252 rpm, a foot-pound of torque is worth more than a foot-pound of horsepower. Conversely, at any point below 5252 rpm each foot pound of torque produces less than 1 hp.

If we hold gear ratio constant, a car will always accelerate the hardest at when torque is highest. Horsepower is important because it allows you to take advantage of lower gearing. With a gearing of say 2:1 200 lb-ft becomes 400 lb-ft. However, the engine has to make two turns for each turn of the wheel. At a gearing of 4:1 200 lb-ft becomes 800 lb-ft but the engine has to make 4 turns to spin the wheels once. Therefore an engine making 200 lb-ft at 6000 rpm can be geared to created twice as much torque as an engine that makes 200 lb-ft at 3000 rpm while turning the wheels at a given speed! It is for this reason that horsepower is important -- it is a measure of how fast the engine can spin while making a given amount of torque.

Link to comment
Share on other sites

Pontiac Solstice GXP 260 lb-ft ( 353 Nm ) @ 2500 - 5250 rpm SAE CERTIFIED Saturn Sky Red Line 260 lb-ft ( 353 Nm ) @ 2500 - 5250 rpm SAE CERTIFIED Chevrolet HHR SS ( Automatic transmission ) 222 lb-ft (301 Nm) @ 1650 rpm SAE CERTIFIED Chevrolet HHR SS ( Manual transmission ) 260 lb-ft (353 Nm) @ 2000 rpm SAE CERTIFIED Chevrolet Cobalt SS ( Manual transmission ) 260 lb-ft (353 Nm) @ 2000 rpm SAE CERTIFIED

This is the info provided when the LNF came out. The HHR and Cobalt were also listed up to 5250 RPM too.

If there any question on how these numbers were determinded I would contact BIll Duncan GM Driveline Engineer. He is the guy behind much of the magic with this engine.

All I can say is I have driven and owned many torque monsters over the years and the pull on this little engine is in more of the RPM range than any of them. Most built to a peek at some point but my engine has a great deal of pull at low mid and higher RPM.

I am at 315 FT LB and GM claims with the upgrade it starts around 1700 RPM and went to 5250 like these ratings here.

I would think if these numbers were false someone would have called GM on it by now. It never takes the perfromance community to call BS on engine output. May LNF's have made it to the dyno on many of the forums and I have yet to see anyone dispute GM HP or Torque numbers yet.

Not matter true or not to understand this engine it needs to be driven. I was not a believer in this power plant till I drove one.

Edited by hyperv6
Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings