Jump to content
News
Reviews
Discussons
Activity
Create New...
Close
  • William Maley
    William Maley

    By William Maley •

    Amount Of Dodge Darts For Dealers Dependent On Caliber Sales

    William Maley

    Staff Writer - CheersandGears.com

    June 19, 2012

    Chrysler has begun taking orders for the new Dodge Dart from their dealers. Hopefully the dealers read the fine print, as there are a couple catches to the new Dart.

    The first catch is how many Darts each dealer will receive. Chrysler will be rewarding a certain number of Darts to dealerships depending on the number of Dodge Caliber models each dealer sold. Despite Caliber production ending last December, there are still 2,200 Calibers still sitting on dealer lots.

    Catch number two deals with the first Darts that the dealers will be receiving. Like the first Chevrolet Volts allocated to dealers, the first Darts will be used for demonstration purposes. Chrysler says the demo Darts can be sold once more Darts enter the flow in late July or early August.

    Source: Automotive News (Subscription Required)

    William Maley is a staff writer for Cheers & Gears. He can be reached at [email protected] or you can follow him on twitter at @realmudmonster.

    Go to articles

    User Feedback

    Recommended Comments

    David

    Makes sense for people to be able to test drive a dart and decide if they want to put money down.

    You know some will be pissed that they cannot drive and buy at the same time, yet supply and demand tends to dicktate this.

    Link to comment
    Share on other sites
    David

    The Caliber thing concerns me...

    WHY????

    A dealership who sells lots of cars should get a better assortment of the new car than one who barely sold them.

    Link to comment
    Share on other sites
    Lamar

    The Caliber thing concerns me...

    WHY????

    A dealership who sells lots of cars should get a better assortment of the new car than one who barely sold them.

    Because the Caliber is a pile and has been since it was introduced. I would feel differently if it were even halfway decent at the time of the Caliber's introduction.

    Link to comment
    Share on other sites
    David

    The Caliber thing concerns me...

    WHY????

    A dealership who sells lots of cars should get a better assortment of the new car than one who barely sold them.

    Because the Caliber is a pile and has been since it was introduced. I would feel differently if it were even halfway decent at the time of the Caliber's introduction.

    I know the caliber had corners cut, but still was a nice over all Entry level car in comparison to others out there.

    My point still stands, why should dealerships who can sell cars not get a better assortment in comparison to dealerships who do not put much effort into selling them.

    Link to comment
    Share on other sites
    NeonLX

    I'm a Mopar fan from way, way back but I never took a liking to the Caliber. My biggest beef was that the interior made me feel claustrophobic...and I'd been driving Neons for years!

    Haven't been in a Dart yet; hope to get some time to poke around in one soon.

    Link to comment
    Share on other sites
    David

    No. the caliber really wasn't a nice entry level car..

    Your right that if you paid MSRP it was not a nice Entry level car. Yet while it was in production, at least here in the Seattle area, you could get a fully loaded awd RT model for around 18K or so, well below MSRP due to rebates and other money thrown on the hood and when you compared it to a stripped down toyota or honda, it was still a very good deal when you compared fully loaded awd rt to base stripped Honda or Toyota for less money.

    Maybe it was just a local thing, but I always could get far more out of the caliber for the price compared to others around here.

    Yes it was a plastic mess inside, but you had the VW approach of selling fully loaded cheap to try and gain market share I guess.

    Link to comment
    Share on other sites
    Lamar

    The fact that they absolutely had to incentivize sales in order to move the Caliber (and that wasn't just a Seattle thing; it was true on the east coast as well) shows how undesirable the car was and that people would only buy them if they were cheap.

    Link to comment
    Share on other sites


    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

    ×

  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive

  • Similar Content

  • Posts

    • David
      Random Thoughts Thread

      By David · Posted

      I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • David
      Airplanes

      By David · Posted

      Either a co-pilot first time landing or something truly went wrong on the plane.
    • trinacriabob
      Random Thoughts Thread

      By trinacriabob · Posted

      The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • trinacriabob
      Random Thoughts Thread

      By trinacriabob · Posted

      Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • trinacriabob
      Airplanes

      By trinacriabob · Posted

      I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.

  • Who's Online (See full list)

    • There are no registered users currently online

  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

I've whitelisted
Continue without support

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings