Jump to content
Create New...
  • Drew Dowdell
    Drew Dowdell

    Saab Parts USA and General Motors come to Warranty Agreement


    December 21, 2012

    Drew Dowdell

    Managing Editor - CheersandGears.com

    How do we know the world is not ending today? Because Saab issued a press release. If they are still alive, then so are the rest of us.

    Saab Automobile Parts North America entered into an agreement with General Motors Company on December 17th for 179 mostly prior Saab dealerships and service centers to provide warranty and service work for all Saabs built prior to the 2009 model year. The agreement does not change the status of Saabs still under GM warranty coverage. Model year 2010 and and 2011 owners will be covered starting in 2013.

    Press release on page 2

    Drew Dowdell is Managing Editor of CheersandGears.com and can be reached at [email protected] or on twitter as @cheersngears


    Saab Automobile Parts North America and General Motors Company enter Warranty Services Agreement

    • Covered owners can now take their Saab vehicles to any of the 179 SPNA Warranty Service Providers to have warranty work performed.
    • Agreement commenced December 17, 2012.
    • Technical and Customer Assistance support will be offered to ensure Saab expertise is available in North America.

    Saab Automobile Parts North America (SPNA), the exclusive provider of Saab Genuine Parts and Accessories to the U.S. and Canadian markets, and General Motors Company (GM) have entered into a Warranty Services Agreement that authorizes SPNA to provide warranty administration and related services through Saab’s network of Warranty Service Providers for model year 2009 and prior Saab vehicles still covered under the GM limited warranty. The agreement permits Saab owners the opportunity to have their vehicles repaired by Saab factory trained technicians using Saab Genuine Parts by a nationwide network of Warranty Service Providers.

    Tim Colbeck, President and CEO of Saab Automobile Parts North America, said: "Our agreement with General Motors is an important step in supporting Saab owners in North America and ensuring they have access to Saab Genuine Parts, service programs and technical support for years to come".

    The transition of warranty administration services from GM to SPNA will commenced on December 17, 2012. Geographically, the agreement covers all of the United States and Canada. It will not affect GM’s original manufacturer limited warranty coverage. All scheduled maintenance, roadside assistance, loaner vehicle allowances and Certified Pre-Owned coverage remain in effect.

    Saab Warranty Service Providers will have a Saab dedicated claims processing team and access to technical experts to assist with the timely completion of necessary maintenance and repairs. To ensure Saab expertise is available in North America, the agreement calls for a Technical Assistance Center (TAC) to be established. The TAC line will be available to all Warranty Service Providers requiring technical support from the SPNA team of experts. The Saab Warranty Services Agreement provides for the best overall customer ownership experience.

    The agreement also calls for the establishment of a North America Customer Assistance Center (CAC). All Saab owners will benefit from the CAC which will be available for customer facing interactions early next year.

    In addition, SPNA will be launching their Saab Secure program in early 2013, providing limited service support to model year ’10 and ’11 owners.

    Saab Automobile Parts North America commenced operations in June 2012. The company is headquartered in Michigan and is responsible for the warehousing, distribution and sale of Saab Genuine Parts and Accessories for all Saab vehicles in the United States and Canada. The company distributes parts and accessories from its 153,000 sq. / ft. warehouse through its nationwide network of Official Service Centers and Warranty Service Providers. With over 50,000 part numbers and over 70,000 parts, the company can ship over 3,000 order lines each day.</p>

    User Feedback

    Recommended Comments



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive
  • Similar Content

  • Posts

    • I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • Either a co-pilot first time landing or something truly went wrong on the plane.
    • The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.
  • Who's Online (See full list)

    • There are no registered users currently online
  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings