Jump to content
Create New...
  • William Maley
    William Maley

    2016 Chicago Auto Show: 2017 Chevrolet Camaro 1LE Now Available With Either V6 or V8 Power

      Chevrolet Adds More Track Performance For the Camaro V8 and Now V6


    Just when you thought it was safe to go back onto the racetrack, Chevrolet has announced the return of the 1LE package for the Camaro. Debuting tomorrow at the Chicago Auto Show, the 2017 Camaro 1LE will be available for the V8 and for the first time, the V6.

     

    Let us break down what you get with either engine.

     

    LT 1LE

     

    The V6 1LE - available on the LT - gets some equipment from the SS 1LE. This includes a new fuel system and the FE3 suspension package with stabilizer bars. Other items for LT 1LE include a mechanical limited slip differential, upgraded cooling system four-piston Brembo brakes for the front, 20-inch lightweight aluminum wheels, and set of Goodyear Eagle F1 tires. A black satin hood and suede interior accents dress up the 1LE. Optional will be a set of Recaro seats and Performance Data Recorder.

     

    SS 1LE

     

    The SS 1LE comes with the new FE4 suspension package with magnetic ride control, electronic limited slip differential, six-piston Brembo brakes on all four corners, 20-inch wheels, and a Goodyear Eagle F1 Supercar tires specifically developed for this vehicle. Upgraded cooling systems for the V8 engine, transmission, and differential come standard. A set of Recaro bucket seats and a head-up display finish the interior.

     

    “The Camaro 1LE packages follow a recipe any track-day enthusiast will appreciate. Start with a lightweight, stiff structure and then add higher levels of suspension stiffness and damping, more aggressive tires, higher downforce, more powerful brakes and more cooling," said Al Oppenheiser, Camaro chief engineer.

     

    “The result delivers better performance in all measures. In our development tests, the V-6 Camaro 1LE delivers lap times comparable with the previous-gen V-8 model. The 2016 Camaro SS 1LE sets the new benchmark for the segment, lapping the Big Willow track at Willow Springs three seconds faster than the standard Camaro SS.”

     

    Chevrolet says the 1LE package will be available late this year. Pricing will be announced a later time.

     

    Source: Chevrolet

     

     

    You can follow our coverage of 2016 Chicago Auto Show News here.

     

    Press Release is on Page 2


     

    New 1LE Packages Elevates Camaro Track Capabilities

    • Track package returns with more technology for V8 models, first time offered on V6


    CHICAGO – The Chevrolet Camaro 1LE performance package returns for 2017, poised to set new benchmarks for attainable track performance.

     


    The package builds off the success of the previous-generation 1LE, offering increased handling and track performance. In response to customer demand, Chevrolet will offer two distinct 1LE packages, for both V6 and V8 models, each visually distinguished with a satin black hood, specific wheels and more.

     

    For the first time, the 1LE package will be available on Camaro 1LT or 2LT coupes equipped with the 3.6L V6. Featuring more aggressive suspension tuning, standard Brembo brakes and Goodyear Eagle F1 tires, the LT 1LE delivers an estimated 0.97G in cornering grip. Available Recaro seats will keep you planted through the corners, and an available Performance Data Recorder will allow you to view and share your track experience.

     

    The new 1LE package for Camaro 1SS models includes magnetic ride control, with a new FE4 suspension tuning and a new, segment-exclusive electronic limited slip differential (eLSD). Paired with massive Goodyear Eagle F1 tires, lateral acceleration will exceed 1G. Additional features available on the 1LE package include standard Recaro seats and a Performance Data Recorder (PDR), new to the Camaro lineup.

     

    As a result, the 1LE package elevates the award-winning performance that earned Camaro the 2016 Motor Trend Car of the Year and Car and Driver 10Best awards.

     

    “The Camaro 1LE packages follow a recipe any track-day enthusiast will appreciate,” said Al Oppenheiser, Camaro chief engineer. “Start with a lightweight, stiff structure and then add higher levels of suspension stiffness and damping, more aggressive tires, higher downforce, more powerful brakes and more cooling.

     

    “The result delivers better performance in all measures,” said Oppenheiser. “In our development tests, the V-6 Camaro 1LE delivers lap times comparable with the previous-gen V-8 model. The 2016 Camaro SS 1LE sets the new benchmark for the segment, lapping the Big Willow track at Willow Springs three seconds faster than the standard Camaro SS.”

     

    The new 1LE packages are available in late 2016, on 2017 Camaro SS and LT V-6 coupes equipped with manual transmissions. Pricing and performance data will be announced at a later date.

     

    Camaro LT 1LE
    The Camaro LT 1LE was developed to be the most track-capable sports coupe in its price class. Highlights include:

    • 3.6L V-6 rated at 335 horsepower and matched with the six-speed manual transmission
    • FE3 suspension components (from the Camaro SS), including dampers, rear cradle mounts, ball-jointed rear toe links and stabilizer bars
    • Lightweight 20-inch forged aluminum wheels with Goodyear Eagle F1 245/40R20 front tires and 275/35R20 rear tires
    • Brembo 4-piston front brake calipers
    • Mechanical Limited-slip differential with 3.27 ratio
    • Standard track-cooling package, with engine oil, differential and transmission coolers
    • Suede steering wheel and shorter-throw shifter
    • Standard dual mode exhaust system
    • Camaro SS fuel system for higher-load cornering capability
    • Satin black hood, front splitter and unique three-piece rear spoiler
    • Unique high flow upper and lower grille with satin black accents
    • Available Recaro seats and PDR video/data recording system.


    “With a curb weight under 3,500 pounds, excellent front-to-rear weight balance and the precision of the FE3 suspension, the Camaro LT 1LE offers unmatched capability in its class,” said Oppenheiser. “As a result, it offers incredible performance for Camaro V-6 customers.”

     


    Camaro SS 1LE
    The 2017 Camaro SS 1LE introduces the new FE4 suspension to the Gen Six Camaro – a performance-oriented chassis system with specific tuning for the Magnetic Ride dampers, springs and stabilizer bars. Additional highlights include:

    • 6.2L LT1 V-8 rated at 455 horsepower, and six-speed manual transmission (automatic transmission not available)
    • Magnetic Ride Control
    • Segment-exclusive electronic limited-slip differential with 3.73 ratio
    • Unique forged aluminum wheels with 285/30ZR20 front tires and 305/30ZR20 rear tires
    • Goodyear Eagle F1 Supercar tires with a compound and construction developed exclusively for the Camaro – offering exceptional grip on the track
    • Brembo brakes with new six-piston monobloc front red calipers – featuring the 1LE logo – and two-piece rotors. Measuring 14.6 inches (370mm) in diameter, the front rotors are 7 percent larger than Camaro SS
    • Track-cooling package, with engine oil, differential and transmission coolers
    • Suede steering wheel with shorter-throw shifter
    • Dual mode exhaust system
    • Recaro front seats with aggressive bolsters optimized for shifting and steering comfort
    • Satin black hood, front mirrors and unique three-piece rear spoiler
    • Satin Graphite front splitter and rear diffuser
    • Available PDR video/data recording system

    User Feedback

    Recommended Comments

    I'm all about matte black and accenting things in black as opposed to chrome or silver but that hood..? To "reduce glare". I'm not a fan of the hood but other than that, it's going to be a fantastic car. 

    Link to comment
    Share on other sites

    Of course the mechanical upgrades are the bomb, but that green color... WOW!

     

    ^ I even think the green is pretty cool. Just not the ricer-black hood. 

     

    Sadly that green color is just only a pre-production thing as Automobile reported. 

     

    The paint that you literally won’t be able to miss on the Chicago-bound V-6 1LE is called Krypton Green, but Chevrolet says it is at this point just a pre-preproduction color. Build it, we implored them.

    • Agree 1
    Link to comment
    Share on other sites

    Fair enough, but not a ricer trend.  More old-skool.  Witness: 

     

     

    attachicon.gifnew%20front%20driverside.jpg

    That's not the same.. That's painted in the middle almost as a thick stripe There's red hood in front, and on both sides of that Mach 1(and all '69 Mach 1's and even less black on later models) and it's pin striped around it..not just dipped in black.. 

     

    Don't get me wrong, I LOVE black accented things and especially in a matte black just not an entire hood. It looks like the neighbors honda with a fart can and R stickers all over it. 

    Link to comment
    Share on other sites

    I'll do anything to erase all connection in your mind between "Camaro" and "ricer".  Does this help?

     

    attachicon.gif1969-ford-mustang-boss-302-10.jpg

    lol if you can make them paint the hood body color or something like that mustang, or any mach 1 of the past, or ANY kind of striping that GM has done in the past. 

     

    Again, that picture has body color all around the black and a pinstripe around it as well.. Still not the same. 

    Link to comment
    Share on other sites

    I like the idea of the V6 1LE, but I have a feeling they priced it off most enthusiasts' car shopping lists. The base V6 is already pushing $30k with NO options. Is a track-prepped V6 model really that appealing in the mid-$30k range? The new Camaro pulls over .9g to start with.

    Link to comment
    Share on other sites

    Yawn, the final days of the old muscle cars. Be interesting to see if they do a 21st century EV Performance package. :P

    You and I are always almost on the same page. And when we are not...its juts a couple of differing footnotes...

     

    I dont know how to respond to this emotion that you just opened up...

     

    On one hand, a Camaro, like a Corvette, should ALWAYS be about crude oil,on the other hand, time to grow up and put away childish things, time to put some real muscle into that power train....and nothing is more powerful than the anger of a God and his thunder bolts...

     

    Dead dinosaurs

     

    or

     

    7489.jpg

     

    I think its time for Camaro to start shoving lightning bolts down the Mustang's ass!!! :D

    • Disagree 1
    Link to comment
    Share on other sites

    Anyone who comes into a Camaro thread mentioning that awful E word should be dealt with. :hijacked:

    http://www.engineering.com/ElectronicsDesign/ElectronicsDesignArticles/ArticleID/8204/A-Hybrid-Electric-Camaro.aspx

     

    ecocar3.jpg?auto=format&ch=Width%2CDPR&c

     

    Another link.

    http://www.greencarreports.com/news/1083268_55000-kit-to-build-electric-chevrolet-offered-by-gm

     

    Hold on to a chair BLU...maybe even have a seat...

     

    Sponsored by... :gm_logo:

     

     

    yet another link...

    http://www.autoblog.com/2011/08/12/electric-chevy-camaro-tears-down-1-4-mile-in-10-08-seconds/

    Edited by oldshurst442
    Link to comment
    Share on other sites

     

    I'll do anything to erase all connection in your mind between "Camaro" and "ricer".  Does this help?

     

    attachicon.gif1969-ford-mustang-boss-302-10.jpg

    lol if you can make them paint the hood body color or something like that mustang, or any mach 1 of the past, or ANY kind of striping that GM has done in the past. 

     

    Again, that picture has body color all around the black and a pinstripe around it as well.. Still not the same. 

     

    8585c74f976321853417ca2ef85eb480.jpg

     

     

    CS6JYdpUcAAKSfb.jpg

     

    I see what you are saying CCAP...but the Hellcat does the same thing here...plus it has all kinds boy racer vents...sure functional, but very ricer...

    So...like I said, I UNDERSTAND what it is you are saying...

     

    The BIG question here is...could one actually say that the ORIGINAL ricer cars be the muscle cars?

     

    Big Wings...

    0_wing-spoiler_low_res.jpg

     

    All show and no go decals...

    1974_HurstOlds_3.jpg

     

    Wings again...

    img-32041442e2.jpg?v=6

     

    Scoops? Muscle cars got plenty of those...

     

     All show and no go scoops in this muscle car...2 of them...

    558c079bd0d6d.jpg

    Link to comment
    Share on other sites

    "RICER"

     

    I don't believe that word means what you think it means.

     

    "All show and no go" on the Trans Am scoops?  AHEM, you can see they are not fake... they are functional there, Scovy Duck!

    Edited by ocnblu
    Link to comment
    Share on other sites

    I'll do anything to erase all connection in your mind between "Camaro" and "ricer".  Does this help?

     

    attachicon.gif1969-ford-mustang-boss-302-10.jpg

    lol if you can make them paint the hood body color or something like that mustang, or any mach 1 of the past, or ANY kind of striping that GM has done in the past. 

     

    Again, that picture has body color all around the black and a pinstripe around it as well.. Still not the same.

    8585c74f976321853417ca2ef85eb480.jpg

     

     

    CS6JYdpUcAAKSfb.jpg

     

    I see what you are saying CCAP...but the Hellcat does the same thing here...plus it has all kinds boy racer vents...sure functional, but very ricer...

    So...like I said, I UNDERSTAND what it is you are saying...

     

    The BIG question here is...could one actually say that the ORIGINAL ricer cars be the muscle cars?

     

    Big Wings...

    0_wing-spoiler_low_res.jpg

     

    All show and no go decals...

    1974_HurstOlds_3.jpg

     

    Wings again...

    img-32041442e2.jpg?v=6

     

    Scoops? Muscle cars got plenty of those...

     

     All show and no go scoops in this muscle car...2 of them...

    558c079bd0d6d.jpg

    At first I was super surprised I never noticed the black hood on the Hellcats then the more I looked into it I don't think that's factory. I think the one you showed me was painted aftermarket. I tried to build a Hellcat and didn't see any black hood option.

    I guess it isn't "ricer" because they said the purpose of it(reduce glare). To me, something that is to simulate performance without any actual gains is rice. Like the ricer crowd originally painted their hoods to fake a carbon fiber hood.

    Link to comment
    Share on other sites

    94f3e3243128a64b27f71fe8ad8ac5ab.JPG?ito

    Dodge showroom...

     

    Ahem...MOPAR showroom...

     

    Oh and BLU...

    a 1977 Trans Am 6.6 liter 400 motor  was crap..yeah I know...I pictured 1979 model...a 1979 model gained a tad more performance...still crap

    The torque part helped move the car...but...the car did not move fast enough...not enough to warrant all that gold striping and screaming chickens and scoops...

     

    By God dude...it wasnt a 455SD...now was it?

    73pont60765-4.jpg

    1973 Trans Am 455SD

    0-60 about 5 seconds

    1/4 mile about mid 13s @ 105 mph?

     

    Pretty respectable, even by today's insane performance stats...

     

    1977 6.6 liter Trans Am

    0-60 in like 11 seconds

    1/4 mile in like 17 seconds...

     

    1979 6.6 liter with the 220 Hp 320 ft/lbs torque....not too shabby...for 1979...

    0-60 in about 7 seconds

    1/4 mile in 15 seconds...

     

    Not too bad at all actually for the 1979 model...

    In any case though,  concerning a Black and Gold Bandit Trans Am...all show and no go...considering a 1973 model with the same fender scoops and similar hood shakers blew the doors off its later year brethren...

    Edited by oldshurst442
    Link to comment
    Share on other sites

    And I'm interested in this car again......

    Yeah, it's going to be a crazy performer. I read one of the writeups on it where they figure the starting price for the smallblock one will be about 42 grand and the V6 will be about 32. I'd buy the V8 one for the rims and tires alone.

    It'll be fun to see what it does in comparos. Asymmetrical warfare and all that.

    Edited by El Kabong
    Link to comment
    Share on other sites

    V6 1LE... Chevy, what are you trying to do to me? My only complaint echoes what ccap said; I really don't like the hood. It's tacky, mostly due to the fact that the shape isn't great for the contrast. On the old 1LE, the hood's shape helped the contrast seem more... natural, I suppose. Maybe I'm just weird. 

     

    This:

     

    ABTL_2014-Chevrolet-Camaro-Front-Quarter

     

    Looks better than:

     

    camamaramar.jpg

     

    Thanks to the intersection with the a-pillar as shown via my photoshopped arrow. :P

    • Agree 1
    Link to comment
    Share on other sites

    V6 1LE... Chevy, what are you trying to do to me? My only complaint echoes what ccap said; I really don't like the hood. It's tacky, mostly due to the fact that the shape isn't great for the contrast. On the old 1LE, the hood's shape helped the contrast seem more... natural, I suppose. Maybe I'm just weird. 

     

    This:

     

    ABTL_2014-Chevrolet-Camaro-Front-Quarter

     

    Looks better than:

     

    camamaramar.jpg

     

    Thanks to the intersection with the a-pillar as shown via my photoshopped arrow. :P

    Completely agree, you nailed it! 

     

    I also think if they had broken the hood up some how with a heat extractor(which I'm surprised they didn't to at least eliminate the under hood lift) I think it would have looked better as well. There's just something about the all black hood that doesn't mesh with the rest of the car to me. 

     

    Gloss black everything else...matte black hood. 

    Link to comment
    Share on other sites



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive
  • Similar Content

  • Posts

    • I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • Either a co-pilot first time landing or something truly went wrong on the plane.
    • The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.
  • Who's Online (See full list)

    • There are no registered users currently online
  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings