Jump to content
Create New...
  • William Maley
    William Maley

    GM's Top Lawyer, Delphi Exec Get Grilled By Senate

      The Senate Grills GM's Top Lawyer and Delphi CEO

    Another day, another senate hearing into the General Motors ignition switch recall. Today, two new people were grilled by the committee about their knowledge in this mess.

    First up was Michael Millikin, GM's General Counsel. Millikin testified that he didn't know about the issue till February of this year. He also testified that lawyers working for GM during April 2013 had information pertaining to this from a case they were working on. However, they failed to notify engineers about the problem.

    "That was tragic. If they had brought it to my attention at that time, I certainly would have made sure that they had done something," Millikin said.

    Lower-level lawyers were among those fifteen people who let go a couple months ago.

    However, many of the senators were wondering why Millikin was still employed with the company.

    "I do not understand how the General Counsel for a litigation department that had this massive failure of responsibility, how he would be allowed to continue in that important leadership role in this company," said Senator Claire McCaskill, chairwoman of the Senate Commerce subcommittee.

    The senators said Millikin should be held responsible for the actions of the lower-level lawyers.

    “My view is the team has to change,” said Senator Richard Blumenthal.

    Millikin testified that the company has brought in an outside law firm to review the litigation department.

    Also testifying today was Delphi CEO Rodney O'Neal. Delphi was the company who manufactured the switches and was being called in to explain their role in the recall. O'Neal testified that the company followed the specifications given by GM when making the switch. That included the low resistance turn because GM wanted it to turn smoothly.

    "GM knowingly approved a final design that included less torque than the original target. In our view, that approval established the final specification," said O'Neal.

    GM CEO Mary Barra who was at the hearing said that it was GM's fault for the design of the part, not Delphi.

    Source: Reuters, The Detroit News, (2)

    William Maley is a staff writer for Cheers & Gears. He can be reached at [email protected] or you can follow him on twitter at @realmudmonster.

    User Feedback

    Recommended Comments

    About time Delphi was grilled on this and NO I do not buy it was just GM's fault. Delphi knew this was not good and should have built the part to the original spec not a lower spec. Also my gut tells me Delphi probably came back to GM and said you could build it at this lower spec and it would save X amount per part equaling millions that can go to executive bonuses for saving money.

    Link to comment
    Share on other sites

    About time Delphi was grilled on this and NO I do not buy it was just GM's fault. Delphi knew this was not good and should have built the part to the original spec not a lower spec. Also my gut tells me Delphi probably came back to GM and said you could build it at this lower spec and it would save X amount per part equaling millions that can go to executive bonuses for saving money.

     

    I would disagree with that latter part. Especially when you consider this story from The Detroit News in April - Bad blood cited between GM, ignition switch supplier Delphi

     

    A couple of key quotes: 

     

     

    At the same time, GM was looking for ways to cut costs to cover an ever-widening cost gap with its foreign competitors. Squeezing suppliers for pricing concessions was a lot easier than addressing its own inefficiencies and uncompetitive business model.

     

    “They had Delphi over a barrel and they knew it. GM just went after them and put on all sorts of pressure to reduce costs,” said John Henke, president of Planning Perspectives Inc., which tracks relations between automakers and their suppliers. “The two companies hated each other. If you were a Delphi engineer and you worked with GM, you didn’t want to get out of bed in the morning.”

     

    Henke and other analysts believe the caustic relationship between General Motors and Delphi led to substandard parts being shipped by the supplier. And they say the dysfunctional state of Detroit’s automobile industry in the years leading up to its near-death experience in 2008 and 2009 helps explain why GM would have accepted them and installed them on its vehicles. 

     

     

    Henke has been asking suppliers to rate their relations with automakers since 1992. From 2002 to 2007, GM was consistently rated the worst company to do business with in his annual survey.

     
    “Relations with GM were definitely the most contentious,” he said. “They were so cost-oriented; price took precedence over quality. Suppliers were threatened with loss of business if they didn’t reduce the cost of their components. They had to be incredibly creative to meet GM targets.”

     

     

    Competing with other suppliers for business was often a brutal process at GM, according to Henke, who says the automaker routinely summoned parts manufacturers to its headquarters, put the representatives of each company in a different room and then asked them to name their lowest price for a given component. The GM purchasing reps would then take the lowest figure and challenge the other companies to beat it. And they would keep doing that until none of the suppliers was willing to go any lower.

     
    That sometimes resulted in suppliers bidding so low that they had to cut corners to meet the promised price. And that, says Henke, is one reason why GM ended up receiving parts that did not meet its own specifications, as the company now says happened with the ignition switches from Delphi. And he said GM was willing to accept those parts because the alternative — delaying production — was too costly.

     

    Should Delphi get some of the blame? Sure. But all roads lead back to GM.

    Link to comment
    Share on other sites

    Very interesting to read this. This information is what the news needs to be sharing about the problems in the culture of the company and how bean counters and lawyers tend to affect and play games with peoples life all over a few cents.

     

    Did they ever look at their own stupidty for over paying assembly line labor, over paying executives and the wasteful bonuses plus not having cleaned up their own product lines. It was hard on this country but the near death was a good thing I think in forcing the company to clean up its act. Hopefully this will force them to continue to do the right thing and get better.

    Link to comment
    Share on other sites



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive
  • Similar Content

  • Posts

    • I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • Either a co-pilot first time landing or something truly went wrong on the plane.
    • The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.
  • Who's Online (See full list)

    • There are no registered users currently online
  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings