Jump to content
Create New...
  • William Maley
    William Maley

    Harald Wester Out As Alfa Romeo and Maserati CEO, Reid Bigland Takes His Place

      Fiat Chrysler Automobiles switches out the CEO for Alfa Romeo and Maserati to try and right the ship


    Another leadership shake-up at Alfa Romeo and Maserati has taken place. Today, Fiat Chrysler Automobiles announced Reid Bigland will take over from Harald Wester as the CEO for the two brands. Wester will remain as FCA's chief technology officer, and Bigland will continue as the head of U.S. and Canadian sales.

     

    "I am thankful for the work Harald has carried out in the last few years establishing a sound technical framework for our two premium brands and which has culminated in the recent launch of the Maserati Levante and the Alfa Romeo Giulia" said FCA CEO Sergio Marchionne in a statement.

     

    "It is time now for our efforts to be directed towards the global commercial expansion of these two brands, and I can think of no one better than Reid to fulfill that mission.”

     

    Bigland inherits what can be described as a 'comedy of errors'. The relaunch of Alfa Romeo is considerably over budget according to supplier sources to Automotive News. Meanwhile, countless delays have pushed back the launch of the Giulia (on sale at the end this month for Europe, fall for the U.S.) and Alfa's first SUV - the Stelvio - has been pushed back to early next year. Originally, Alfa Romeo was supposed to have eight models by 2018. This has been pushed back to 2020.

     

    Maserati isn't faring much better with profits falling and a lineup that is aging. The Levante SUV has been plagued by delays. European sales only began this month, with U.S. sales starting in October.

     

    Source: Automotive News (Subscription Required), Fiat Chrysler Automobiles

     

    Press Release is on Page 2


     

    FCA Announces Leadership Changes

     

    Fiat Chrysler Automobiles N.V. (NYSE: FCAU / MTA: FCA) announces the following leadership changes with immediate effect:

     

    Reid Bigland is named as the Chief Executive of the Alfa Romeo and Maserati brands. Reid has held a number of Sales and Brand Leadership positions within FCA, and is currently the Head of US Sales and the Chief Executive of FCA Canada, positions that he will continue to hold.

     

    Harald Wester, who has led the Alfa Romeo and Maserati brands until now, will be able to devote his full attention to the role of Chief Technology Officer for FCA, a role which he held while developing the technical basis for the Maserati and Alfa Romeo products and brands, and which have now achieved a high level of maturity.

     

    “I am thankful for the work Harald has carried out in the last few years establishing a sound technical framework for our two premium brands and which has culminated in the recent launch of the Maserati Levante and the Alfa Romeo Giulia. It is time now for our efforts to be directed towards the global commercial expansion of these two brands, and I can think of no one better than Reid to fulfill that mission. Reid has an extraordinary record of growing sales and market share in the US and Canada over the last 7 years at FCA, including leading the growth and positioning of the Ram and Dodge brands for part of that time.” added Sergio Marchionne, Chief Executive Officer of FCA.

     

    Reid Bigland and Harald Wester will continue to serve on the Group Executive Council (GEC). The Group Executive Council is the highest management body in FCA, and is chaired by the Chief Executive and is comprised of the senior functional and operating heads of the global organization.

    User Feedback

    Recommended Comments

    The Start of playing Musical Chairs of executives to keep from people seeing the real fact that FCA is about dead and will probably end up in China Hands.

     

    RIP Jeep, Ram, Dodge and Chrysler.

     

    Welcome the Death of money wasting product lines Fiat, Lancia, Alfa, Maserati.

    Link to comment
    Share on other sites



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive
  • Similar Content

  • Posts

    • I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • Either a co-pilot first time landing or something truly went wrong on the plane.
    • The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.
  • Who's Online (See full list)

    • There are no registered users currently online
  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings