Jump to content
Create New...
  • William Maley
    William Maley

    Mitsubishi and the Past Few Days it Would Like to Forget

      The past few days have been a whirlwind for Mitsubishi. Here is the latest.


    The past couple days have been crazy at Mitsubishi with executives possibly stepping down, the EPA ordering retest of vehicles, and the U.S. branch telling dealers there are no inconsistencies in the tests for the U.S. models. Let's get you up to date.

     

    On Tuesday, the Environmental Protection Agency (EPA) and California Air Resources Board (CARB) requested details from Mitsubishi on its U.S. vehicle lineup to check for discrepancies. The EPA also requested Mitsubishi to retest their U.S. lineup.

     

    A day later, Japanese media reported that Mitsubishi Motors CEO Osamu Masuko and COO Tetsuro Aikawa would resign due to manipulation of fuel economy data. According to Reuters, Aikawa denied these reports.

     

    "It's my responsibility and my mission to put the company on track to recovery. Beyond that, I haven't had a chance to even consider" the possibility of resigning, Aikawa said.

     

    Reuters also reports that Mitsubishi Motors could be on the hook for almost $1 billion to compensate owners, pay back tax rebates from the government, and other payments. This is according to analysts at Nomura Holdings.

     

    Yesterday, Mitsubishi Motors North America said they found no testing problems with vehicles sold in the U.S. between 2013 to now.

     

    “Our findings confirm that fuel economy testing data for these U.S. market vehicles is accurate and complies with established EPA procedures,” Don Swearingen, COO of 
Mitsubishi Motors North America told dealers in a letter to dealers. The letter was obtained by Automotive News.

     

    Source: Reuters via Automotive News, Reuters, Automotive News (Subscription Required), Mitsubishi

     

    Press Release is on Page 2


     

    Mitsubishi Motors North America Statement Regarding Fuel Consumption Testing Data

     

    April 27, 2016

     

    Mitsubishi Motors Corporation in Tokyo recently announced irregularities concerning fuel consumption testing data.

     

    To confirm that U.S. market vehicles are not affected by this issue, Mitsubishi Motors R&D America, Inc., working together with Mitsubishi Motors Corporation, proactively conducted an internal audit of U.S. market vehicles going back several model years to check previously submitted data to the EPA. After a thorough review of all 2013MY – 2017MY vehicles sold in the United States, we have determined that none of these vehicles are affected. Our findings confirm that fuel economy testing data for these U.S. market vehicles is accurate and complies with established EPA procedures.

     

    An entirely different system is used for the United States market to determine what the EPA calls Road Load Coefficient, strictly adhering to EPA procedures. The data generated is then independently verified for its accuracy before being submitted to the EPA for their fuel economy testing. MMNA has shared this information with EPA, California Air Resources Board and DOT.

     

    Mitsubishi Motors Corporation has acted quickly to address this issue and is putting in place a committee of external experts to thoroughly and objectively continue this investigation. The results of the investigation, once completed, will be made public.

     

    Mitsubishi Motors Corporation is also working closely with the Japanese Government to fully review the implications of this issue, and to discuss potential resolutions.

    User Feedback

    Recommended Comments



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive
  • Similar Content

  • Posts

    • I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • Either a co-pilot first time landing or something truly went wrong on the plane.
    • The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.
  • Who's Online (See full list)

    • There are no registered users currently online
  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings