Jump to content
Create New...
  • William Maley
    William Maley

    Next-Generation Nissan Leaf To Feature 200-Plus Mile Range

      Nissan isn't planning to be left behind when the likes of the Bolt and Model 3 arrive

    The current Nissan Leaf offers a max range of 107 miles. But that will pale in comparison with the upcoming Chevrolet Bolt and Tesla Model 3 which will offer a range of 200 miles. Nissan is aware of this and will be addressing this with the next-generation Leaf.

     

    Speaking with Autoblog, Nissan's global director of EV and HEV engineering Kazuo Yajima said the next-generation Leaf will feature a 60-kWh battery that should give it an overall range of between 210 to 220 miles. The current Leaf either comes with either a 24 or 30-kWh battery.

     

    Yajima wouldn't say when the next-generation Leaf would be introduced, although some believe it will be shown in 2018.

     

    Source: Autoblog

    User Feedback

    Recommended Comments

    The BOLT not only shocked the world, but put pressure on all Auto OEMs. As to why we saw a rushed Tesla 3 shown and Hyundai announced their Ioniq or how ever you spell it EV auto with plug in VOLT competitor also to be out at the end of 2016 on lots 2017.

     

    I expect this 2nd Generation leaf to be shown early next year at one of the autoshows.

     

    Based on reading Nissan's web site about their EV plans, the engineers are pushing for mid 200 mile range, but I can understand the conservative nature of saying 210-220 which is a decent range for a compact like this.

     

    I am excited to see what the final EPA numbers are for the BOLT as GM still advertises full charge in 9 hrs at 25 miles per hr charge. So this would give the BOLT a 225 mile battery pack range.

     

    Over all the future of near silent gliding auto's is upon us. :metal:

    Link to comment
    Share on other sites

    The BOLT not only shocked the world, but put pressure on all Auto OEMs. As to why we saw a rushed Tesla 3 shown and Hyundai announced their Ioniq or how ever you spell it EV auto with plug in VOLT competitor also to be out at the end of 2016 on lots 2017.

     

    I expect this 2nd Generation leaf to be shown early next year at one of the autoshows.

     

    Based on reading Nissan's web site about their EV plans, the engineers are pushing for mid 200 mile range, but I can understand the conservative nature of saying 210-220 which is a decent range for a compact like this.

     

    I am excited to see what the final EPA numbers are for the BOLT as GM still advertises full charge in 9 hrs at 25 miles per hr charge. So this would give the BOLT a 225 mile battery pack range.

     

    Over all the future of near silent gliding auto's is upon us. :metal:

    Is that charge rate on a 110 outlet or a 220 that needs to be installed in your garage? 

    Link to comment
    Share on other sites

     

    The BOLT not only shocked the world, but put pressure on all Auto OEMs. As to why we saw a rushed Tesla 3 shown and Hyundai announced their Ioniq or how ever you spell it EV auto with plug in VOLT competitor also to be out at the end of 2016 on lots 2017.

     

    I expect this 2nd Generation leaf to be shown early next year at one of the autoshows.

     

    Based on reading Nissan's web site about their EV plans, the engineers are pushing for mid 200 mile range, but I can understand the conservative nature of saying 210-220 which is a decent range for a compact like this.

     

    I am excited to see what the final EPA numbers are for the BOLT as GM still advertises full charge in 9 hrs at 25 miles per hr charge. So this would give the BOLT a 225 mile battery pack range.

     

    Over all the future of near silent gliding auto's is upon us. :metal:

    Is that charge rate on a 110 outlet or a 220 that needs to be installed in your garage? 

    9hrs to full charge on a 240V charging system.

     

    Per Chevy Web Site:

    post-12-0-97101100-1466606850_thumb.jpg

    Link to comment
    Share on other sites



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive
  • Similar Content

  • Posts

    • I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • Either a co-pilot first time landing or something truly went wrong on the plane.
    • The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.
  • Who's Online (See full list)

    • There are no registered users currently online
  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings