Jump to content
Server Move In Progress - Read More ×
Create New...

BMW News: BMW Planning To Offering Plug-In Hybrid Versions Across the Range


William Maley

Recommended Posts


BMW announced today that it plans on offering a plug-in hybrid version on "all its core-brand models," in the future. The plug-in hybrids will utilize battery and motor technologies from the i3 and i8 models.

“All BMW Group models benefit from BMW i. The fundamental technology involved in battery cells, electric motors and the power electronics will be used in our upcoming plug-in hybrid models. When it comes to the electrification of the drivetrain, we are deliberately developing a wide-ranging expertise in order to offer our customers worldwide the ideal solution," said Herbert Diess, member of the board for BMW's development.

At a event in Miramas, France, the automaker will debut a 3 Series plug-in hybrid prototype which features a turbocharged 2.0L four-cylinder and the electric motor from BMW's i models.

Source: BMW

Press Release is on Page 2


New generation of plug-in hybrid models

Munich/Miramas. The BMW Group is preparing to follow up its innovative and revolutionary BMW i models with plug-in hybrid versions of the core-brand models. In Miramas, France, it will present a BMW 3 Series plug-in hybrid prototype and a new generation of hybrid vehicle concepts incorporating technology already used in BMW i models. Long term, the BMW Group is planning to offer plug-in hybrid versions of all its core-brand models.

Herbert Diess, Member of the Board of Management BMW AG, Development, said:

“All BMW Group models benefit from BMW i. The fundamental technology involved in battery cells, electric motors and the power electronics will be used in our upcoming plug-in hybrid models. When it comes to the electrification of the drivetrain, we are deliberately developing a wide-ranging expertise in order to offer our customers worldwide the ideal solution.

The plug-in hybrid models presented in Miramas are equipped with a highly efficient internal combustion engine and an electric motor powered by an externally rechargeable high-voltage battery. Shorter-distance urban trips or commutes can be completed on electric power only. On longer journeys, the vehicle will usually operate in “combined mode”, with both systems working together.

The BMW 3 Series plug-in hybrid prototype combines a four-cylinder petrol engine with an electric motor. The internal combustion engine is based on the TwinPower Turbo four-cylinder petrol engine that has already twice been voted “International Engine of the Year”.

The electric motor and power electronics are directly based on the BMW eDrive technology already used in the BMW i3 and BMW i8 models. The prototype’s lithium-ion battery, including the battery management system and the high-efficiency direct cooling system, are likewise based on BMW i experience and know-how.

The plug-in hybrid technology is so flexible that it can be integrated in a wide variety of vehicle concepts. It will therefore be possible to deploy it rapidly across the BMW model range. The route to sustainable mobility in the future will be a multitrack one. The already efficient combustion engines will be even more economical. All-electric vehicles like the BMW i3 are tailored to urban mobility requirements while plug-in hybrids are more appropriate for longer-distance journeys. Beyond this, in the long term electric mobility in conjunction with hydrogen fuel cell technology could also be a viable option.

The focus of our Efficient Dynamics strategy is the electrification of the power train. This is an area in which we will continue to expand in the coming years. The plug-in technology will be one key lever to bring high performance vehicles well below 100 g / km CO2, while retaining the driving pleasure and driving dynamics of a BMW. We will also continue to develop fully electric mobility. Hydrogen fuel-cells will remain a key issue when it comes to drivetrain development, especially relating to its sustainable production.

Key eDrive technologies developed in-house

All the important eDrive technologies and components are developed in-house, and from next year they will all be built at the BMW plant in Dingolfing. This programme is set to create over 200 new jobs around electro-mobility at the BMW plant in Dingolfing. Many tens of millions of euros will be invested at this plant over the next five years.

“Our accumulated expertise guarantees us a competitive edge,” stated Harald Krüger, Member of the Board of Management of BMW AG, Production. “This can be seen not only in the performance data of the BMW electric motors but also in our highly efficient production process.”

Since the BMW Group expects to be building a wide range of electric drive components in the future, production will be organised around an intelligent eDrive component-sharing system. This means that one and the same production line will be able to build high-voltage battery modules not just for the BMW i8 but also for the future BMW X5 eDrive. In the case of complete battery packs, too, the new production lines will be designed for a flexible production mix: it will be possible to build battery packs for a number of different future models all on the same lines.

Highly electrified hybrids

With the ongoing development and refinement of hybrid drive systems under the EfficientDynamics programme, the aim is to maximise the amount of time the vehicles are able to spend in electric mode. To ensure that this increased electric operation goes hand in hand with typical BMW dynamic performance, everyday practicality and maximum long-distance capability, the BMW Group’s future hybrids will be “highly electrified”. Highlights of this future Power eDrive technology will include much more powerful electric motors and batteries with twice the capacity of present versions.

The drive systems used in these future hybrid systems will offer combined outputs in excess of 500 kW. Also, the capacity of the lithium-ion batteries – up to 20 kilowatt hours – will be greatly in excess of current hybrid systems . Coupled with an increased all-electric driving range of up to 100 kilometres (62 miles), this will make it possible to operate in locally emission-free pure-electric mode on virtually all day-to-day trips .


View full article

Link to comment
Share on other sites

WOW, So copy the VOLT! Greatest compliment is to copy your competition. So BMW could do no better than copy GM's terrible VOLT system?

 

SMK how do you explain that?

Link to comment
Share on other sites

So it will be a 62 mile range in pure electric only mode. YAWN, The VOLT beats it there. The only thing that would be better is if they really deliver on offering this power train in all models.

 

GM needs to role out the VOLT powertrain to CUV, SUV, Full size SUV and Pickups and cover FWD, AWD and RWD models. No reason not to move to this powertrain sooner rather than later. The torque of the system will far out-way traditional engine performance alone.

Link to comment
Share on other sites

The point of the Volt was to always run on electric motor, and use the gas engine to recharge the battery.  What BMW is doing it more like the plug-in Prius, it can run on electric only when there is little load, or the gas engine can drive the wheels when you need more power or when the battery is dead.  BMW has to roll out more plug-ins because Mercedes will have 10 of them by 2018.  The German horsepower war is ending, the fuel efficiency battle is about to begin.

Link to comment
Share on other sites

The point of the Volt was to always run on electric motor, and use the gas engine to recharge the battery.  What BMW is doing it more like the plug-in Prius, it can run on electric only when there is little load, or the gas engine can drive the wheels when you need more power or when the battery is dead.  BMW has to roll out more plug-ins because Mercedes will have 10 of them by 2018.  The German horsepower war is ending, the fuel efficiency battle is about to begin.

 

Well... no. You're right about the BMW, but not about the Volt.  When the battery is depleted, the gas generator to electric motor connection is essentially direct... meaning the gas motor generates just a little more than just enough juice to run the power demands of the electric motor.  Any excess that spills over into the battery is just stored for later.   The Volt is set up the same way diesel-electric locomotives work except that almost locomotives don't have batteries for storage (there are a few locomotives with batteries out there, but they are mostly proof of concept prototypes and not in wide circulation) 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings