Jump to content
Create New...
  • William Maley
    William Maley

    Ford and General Motors Sign An Agreement To Work Together On Transmissions

    William Maley

    Staff Writer - CheersandGears.com

    October 1, 2012

    Automotive News is reporting that Ford and General Motors have signed a memorandum of understanding to jointly develop next-generation nine and ten-speed automatic transmissions.

    Sources say that General Motors will take the lead on developing the nine-speed transmission for front-wheel drive and transverse applications. Ford will take on the ten-speed for rear-wheel drive applications.

    This isn't the first time that Ford and General Motors have worked together on transmissions. Back in 2002, the two companies worked together to develop six-speed automatic transmissions for front-wheel drive vehicles. Those transmissions would end up in vehicles such as the Ford Fusion and Chevrolet Cruze.

    Before this announcement, the two companies were working on their own eight-speed automatics. Last June, Ford announced they were working on a eight-speed transmission. A source said that in the past year, the company scraped it before it began talking with GM.

    GM was working on a eight-speed automatic that would have appeared in the next-generation CTS and pickups. A source revealed that the volume projections for the eight-speed have been reduced drastically.

    Source: Automotive News (Subscription Required)

    William Maley is a staff writer for Cheers & Gears. He can be reached at [email protected] or you can follow him on twitter at @realmudmonster.

    User Feedback

    Recommended Comments

    H'mmmm I wonder just how far before friction renders the additional gears to be a moot point. Yet if it truly can handle the torque and move with greater fuel efficiency then more power to them.

    Link to comment
    Share on other sites

    It worked out great last time, and still, no one does a FWD transmission as well as GM.

    I'd really rather have GM just do all of the automatic development for both FWD and RWD and Ford just license it.

    Link to comment
    Share on other sites

    I wonder how a 9 or 12 speed tranny will do with the smaller engines that have high horsepower but pathetic Torque much like the asian auto makers or european makers that build the pathetic DOHC Revers. I would think that the 9-12 gears would be optimized for fuel mileage and yet you would want a torque monster engine to allow those gears to really do their job.

    Link to comment
    Share on other sites

    I wonder how a 9 or 12 speed tranny will do with the smaller engines that have high horsepower but pathetic Torque much like the asian auto makers or european makers that build the pathetic DOHC Revers. I would think that the 9-12 gears would be optimized for fuel mileage and yet you would want a torque monster engine to allow those gears to really do their job.

    Na, if anything more gears allows for less overall torque.

    Link to comment
    Share on other sites

    I wonder how a 9 or 12 speed tranny will do with the smaller engines that have high horsepower but pathetic Torque much like the asian auto makers or european makers that build the pathetic DOHC Revers. I would think that the 9-12 gears would be optimized for fuel mileage and yet you would want a torque monster engine to allow those gears to really do their job.

    Na, if anything more gears allows for less overall torque.

    I would normally agree with you except that I have experianced auto's that went into limp home mode and if they have more gears like this and if the tranny is not able to go into the bottom gears for a solid limp home mode, then your left with an auto that really will not move due to the lack of torque and yet the crazy gearing.

    I might be one of the rare exceptions to have this happen to, but I have had it happen enough to have decided I would rather give up gas mileage and have more power and especially Torque.

    Link to comment
    Share on other sites

    What's really needed is a wider ratio spread than is currently typical of 6-speed transaxles. We really don't need more speeds. In fact, more speeds can actually hurt performance and economy.

    Most 6-spds are ~6.0:1; the GM Hydramatic 6T70 is 6.04:1 for example. 7 and 8-speed autos currently achieve ~7.5:1. The ratio spread is the difference between the tallest and lowest gear in the transmission. A wide ratio spread allows for stout acceleration from stand still in first and low rpms on the freeway in top gear. Having more ratios only reduces the amount of rpm drop during an upshift.

    With 6-speed transmissions we already have what is close to the ideal in rpm drops on upshifts. Let me give you an example... the current GM 6T40 transmission (Cruze Automatic) will see revs drop from the 6300 rpm redline to 4100 rpms in a 1-2 shift at the redline. In more leisurely driving, a shift at let's say 3800 rpm will see revs drop to 2500 rpm. This is quite optimal as is. Because a redline shift drops revs to near the 1.8 NA engine's torque peak of 3800 rpm. The 1.4T with it's wider torque spread doesn't even really need such a close ratio. In higher gears the gap actually gets narrow so there is even less rpm drop (as a percentage). A 5-6 shift at 6300 rpm sees a mere drop to 4700 rpm.

    Too many speeds actually hurt for three reasons. Firstly, the engine's power is not being fully applied to the wheels during a shift, it is being wasted as heat into the transmission fluid. Hence, energy is wasted during each shift. Secondly, it makes the car slower partly because you are not accelerating during a shift and partly because the car accelerates fastest in any gear at the torque peak hence you want to drop close to that (simply dropping less isn't necessarily better). Finally, a 8-9 speed transmission often employs 3 planetaries instead of 2 -- more gears meshing around = more frictional losses. That going beyond 6 speeds gets you quickly diminishing performance and economy returns is evident in the fact that most 7 or 8 speed boxes "skip shift" routinely. That is they bypass a gear and move two steps up quite often in leisurely driving.

    The problem with making a 6-speed box with a 7~8:1 ratio spread is that the planetaries get pretty big. So it may actually be easier to make a 9-speed with that kind of spread.

    Link to comment
    Share on other sites

    Dwight, doesn't this allow them that? They can use a lot higher top ratio and slightly lower bottom ratio and then have a really low differential ratio. Spritely performance around town, tall gearing for the highway, better driving with less power (assuming that's the goal here)

    ... and there is also replacements for the existing 1.4T and 1.8 coming in about the same time frame.

    Link to comment
    Share on other sites

    Dwight, doesn't this allow them that? They can use a lot higher top ratio and slightly lower bottom ratio and then have a really low differential ratio. Spritely performance around town, tall gearing for the highway, better driving with less power (assuming that's the goal here)

    ... and there is also replacements for the existing 1.4T and 1.8 coming in about the same time frame.

    Yes, a 9~10 speed auto will get you to (or past) a 8:1 ratio spread.

    My point was that the 9~10 speeds really isn't necessary and may actually hurt performance and/or economy. What's needed is the ratio spread and a 6~7 speed transmission with a wider spread will do just as well if not better.

    Link to comment
    Share on other sites

    I wonder how a 9 or 12 speed tranny will do with the smaller engines that have high horsepower but pathetic Torque much like the asian auto makers or european makers that build the pathetic DOHC Revers. I would think that the 9-12 gears would be optimized for fuel mileage and yet you would want a torque monster engine to allow those gears to really do their job.

    You realize that most Jaguar, BMW, Mercedes and Audis have loads of low end torque.

    And the GM 2.4 liter and 3.6 liter engines make similar torque to the Asians, often at even higher RPM.

    But to your point, more gears should help to keep the engine in the sweet spot and get more out of it. The switch from 4-speed to 6 allowed for downsized engines, and the 4-cylinder replacing the V6 in many cars.

    I remember reading a while back that Mercedes thought 9-speed was the ideal and that 10+ was of no benefit, but of course they are making a 9-speed so that could be a biased point. I will say that the Mercedes 7-speed is the best transmission I ever experienced, so I suspect their 9-speed will be great too. Infiniti's 7-speed though is one of those gear skippers and it hunts for 6th or 7th to save fuel then throws itself down to 2 if you get on the gas, it makes for a jerky car to drive.

    Link to comment
    Share on other sites



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • google-news-icon.png



  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive
  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Similar Content

  • Posts

    • You can see some Camaro in those headlights DNA. Would be a Nice Impala replacement or Malibu replacement as a 4-door sedan with haunches. 
    • I just  recently saw this ... me and my smooth riding I.C.E. sedans ... and coupes, too. What's baking in the oven here is mostly looking good.  Mostly. Captivating enough front end ... nicer than that of Camry. A little too heavy handed on the grille, at least for the base model. Attractive enough side windows in the greenhouse with nice lower sculpting and beltline/flank rounding at the rear passenger doors, and quality looking door handles. The exhaust area is handled nicely and the rear lights are sort of thin, jellybean-like, and anticlimactic.  Also, it does NOT want to be a '60s Plymouth Barracuda, a '70s Mustang Mach I from a James Bond movie, nor today's Buick Envista.  Big demerits for what could turn out to be a 2 volume vehicle. Clean it up some ... then "just do it."
    • WOW, If this is what BYD is delivering, then Tesla/Musk needs to be scared, such a superior EV to Tesla 3. BYD Seal Test Drive, Review: Elon Musk's Lucky It's Not on Sale in US (businessinsider.com) This just proves that Apple has the WRONG leadership and is going down. A CEO can be one of three things: Hatchet CEO that cuts up a company and sells off the parts for a golden parachute Stagnant CEO- Current Apple, can run the business to keep making money but has no ability to see the future and lead it to new levels. Visionary CEO - One who can make money and steer the company to new worlds of product / money making. Apple is failing and clearly people should be aware that some Chinese companies are pushing the future of tech in all things including EVs. Xiaomi Just Showed Apple a Smartphone Maker Can Make an Electric Car (businessinsider.com)
    • I have to say that I am very excited by this potential competitor to the Cadillac EscaladeIQ. Both Full size Luxury SUVs. Interiors Yes I know the Genesis is a concept and the suicide doors and flip chairs will not make it to production, but I do hope those chair designs do as they look very comfy and supportive. I have to say that I really like the exterior styling of the Genesis even more than the Escalade.
    • Yeah, it doesn't seem super space efficient.
  • Who's Online (See full list)

  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings