Land Rover has transformed their Defender off-road vehicle which went out of production in 2016 into a more luxurious, roomier, and much more high tech. The new generation of Defender comes in 3-door and 5-door versions. The first on offer will be the 110, a 5-door model with 5, 6, or 7, seats that will arrive in early 2020. Later that year will be the 3-door 90 short wheelbase model with 5 or 6 seats and a van version of the 90 will be on offer also. Following in 2021 will be the longer 130 version with a choice of 7 or 8 seats. While not all pricing has been released, the 110 version will start at $50,925 and will be the only version offered in the US for now.
Powering the Defender will be a choice of 296 hp 2.0-liter, JLR's new 3.0-liter inline 6-cylinder with a mild hybrid system that packs 395 horsepower. Diesel power may come later, won't be available at launch. A plug-in hybrid version will also show up later in the production cycle.
JLR says the new Defender will leave you refreshed after a long drive but still pass through water up to 35.4 inches deep and tow 8,200 lbs.
The new Defender is built on a heavily modified version of the D7u platform used on the Discovery, but that it is so heavily modified, it gets its own codename (D7x) and own assembly line. It also introduces a new entertainment system called Pivi Pro that is more user friendly and uses fewer inputs to perform common tasks. It is capable of taking over the air software updates with 14 different modules capable of taking updates remotely.
BMW released a preview of the BMW Concept 4 for the Frankfurt Auto Show today. The concept features a large vertical grille that will become the new face of the BMW 4-series. The slim headlights have no glass cover allowing a sculptured look to the LED elements. The 4-series features a stretched out hood, long wheelbase, and short overhangs to give an elegant and sporty appearence while the wheel arches contribute to a powerful stance.
BMW did not give any hints as to the powertrain, but the 4-series currently comes in 248 horsepower, 320 horsepower, and 425 horsepower flavors.
This low slung concept is clearly an early look at the next 4-series refresh coming in about a year.
Mercedes-Benz unveiled the Vision EQS Concept today in Frankfurt. The Vision EQS represents the future of luxurious driving.
Powering the Vision EQS is a dual motor system with continuous all wheel drive with approximately 469 horsepower and with about 560 lbs.-ft of torque. The juice for all that power comes from an approximately 100 kWh battery. The top speed is estimated at 124 mph and 0 to 60 will happen in less than four and a half seconds. The Vision EQS is capable of DC fast charging up to 350 KW. Range is estimated at around 435 on the WLTP rating cycle.
The interior of the EQS is intended to remind passengers of the deck of a boat, taking its inspiration from luxury yachts. The interior uses a portion of recycled plastic reclaimed from ocean waste. The wood is Maple from ecologically managed forests in Germany. By using wood from Germany, it ensures a short transportation distance to reduce the CO2 output of the assembly process.
Volkswagen debuted today the Volkswagen ID.3 for the European market. Those of you reading from North America will be disappointed to learn that this is yet more Forbidden Fruit.
The ID.3 is the first vehicle built on VW's new MEB electric vehicle platform. Basic versions will be priced under €30,000 ($33,156) with a range of around 205 miles. Two more battery options will be available, the mid-range giving 260 miles and the largest battery enabling a range of 342 miles. When using DC fast charging, the ID.3 can add enough range to cover 180 miles with just 30 minutes on the plug. With 201 horsepower driving the rear wheels and 229 lb-ft of torque, the ID.3 promises spirited and engaging driving.
The inside is roomy for a vehicle just 165.4 inches long, and should seat 5 with relative ease, while 13.6 cubic feet of cargo room allows for some luggage as long as it is tidy.
VW is limiting the configurations at launch to just 3 options. The basic ID.3 1ST edition includes navigation, heated seats and steering wheel, and 18-inch wheels. The ID.3 1ST Plus adds a rear view camera, adaptive cruise control, keyless access and starting system, a center console with USB-C charging ports, and ambient lighting. For the ID.3 1ST Max, you'll also get an augmented reality heads up display, Beats audio system, panoramic sliding glass roof, and 20-inch alloy wheels.
Volkswagen will be offering home chargers with optional datalink and remote access. VW plans on offering these chargers at a significant price cut below the existing chargers currently available on the market. Free energy with ID.3 1ST Edition purchases allows owners to charge up to 2,000 kWh for free at any WeCharge or Ionity network charging stations, allowing access to more than 100,000 charging stations across Europe.
The ID.3 will be available in Germany in mid-2020.
...A concept that looks to the past for the future...
Hyundai teased an image of its『45』Concept today ahead of the Frankfort International Motor Show. The car will be a fully electric vehicle and will be a symbolic milestone for Hyundai's future EV design.
The concept looks back to the brand's first model in the 1970s for inspiration and is visibly angular. The new design language is an evolution of Hyundai's "Sensuous Sportiness" design. ‘Sensuous’ stands for enhanced emotional values that customers can experience through design, and ‘Sportiness’ is determined to implement those values through innovative mobility solutions.
The 『45』Concept will be unveiled on September 10th.
It was only a few weeks ago when Porsche introduced the third-generation Cayenne. We knew there would more powertrains coming down the road. So we were a bit surprised that at the Frankfurt Motor Show, Porsche unveiled the high-performance Cayenne Turbo.
Under the hood is the same engine you'll find in the Panamera Turbo; a twin-turbo 4.0L V8 offering up 550 horsepower and 567 pound-feet of torque. This comes paired with an eight-speed automatic and all-wheel drive. Porsche quotes a 0-60 mph time of 3.9 seconds (3.7 seconds if you add the Sport Chrono package). Top speed stands at 177 mph. The chassis features a three-chamber air suspension system, Porsche Dynamic Chassis Control roll stabilization (with a 48-Volt electrical system), and rear-wheel steering.
Outside, the Cayenne Turbo bares its aggression with larger air inlets, 21-inch alloy wheels wrapped in meaty tires, and a set of quad exhaust tips.
The 2019 Cayenne Turbo will set you back $125,650 with destination. Porsche dealers will begin taking orders later this year, with deliveries taking place next fall.
Press Release is on Page 2
The new 2019 Porsche Cayenne Turbo
New top model in the Cayenne line with 550 hp, active aerodynamics and high performance brakes
4.0L twin-turbo V8 makes 550 hp, 567 lb-ft of torque
Quicker and faster than previous generation Cayenne Turbo S
Zero to 60 mph in 3.7 seconds (with optional Sport Chrono Package)
Top track speed of 177 mph
Significantly enhanced standard equipment over previous Cayenne Turbo
MSRP of $124,600 excluding processing and delivery fee of $1,050
Expected to arrive at dealerships in Fall 2018
Atlanta, Georgia. The 2019 Porsche Cayenne Turbo took its place at the top of the model line at the 67th Frankfurt International Motor Show. The new model from the third-generation Cayenne range is once again raising the bar for sporty performance in the segment. Its twin-turbo four-liter V8 engine delivers 550 hp. The combination of innovations including a three-chamber air suspension, staggered tire sizes and new high-performance Porsche Surface Coated Brake (PSCB) technology result in improved driving dynamics. With additional options, such as rear-axle steering and electric roll stabilization with a 48-volt system, the SUV achieves the driving characteristics of a sports car. The new Cayenne Turbo accelerates from zero to 60 mph in as little as 3.7 seconds when equipped with the optional Sport Chrono Package toward a top track speed of 177 mph, representing gains over the previous-generation Cayenne Turbo S.
With an exclusive front end and the LED main headlights of the Porsche Dynamic Light System (PDLS), the Cayenne Turbo has a dominant appearance. At night, the new Turbo sets itself apart from other Cayenne models with its double-row front light modules. Widened wheel arches with painted trim and special 21-inch wheels reserved for the Cayenne Turbo characterize the side view. Turbo-specific twin tailpipes distinguish this model from its six-cylinder siblings.
Interior design elements including the center-mounted grab handles continue in the third-generation Cayenne Turbo. Like other members of the new Cayenne family the newest model features the Porsche Advanced Cockpit, which includes a high-definition 12.3-inch screen in the dashboard and an analog tachometer flanked by two seven-inch full-HD screens. Virtually all of the vehicle functions can be displayed and operated using the high-resolution display and touchscreen of the Porsche Advanced Cockpit. Among them, for example, is the standard 710-watt BOSE® Surround Sound System. Other equipment newly included by default in the latest Cayenne Turbo includes 18-way sport seats, seatbacks with integrated headrests, and standard heating functions for all outboard seats as well as the steering wheel.
Greater power, greater torque: twin-turbo V8 with 550 hp
At the heart of the Cayenne Turbo is the twin-turbo four-liter V8 with 550 hp and 567 lb-ft of peak torque (increases of 30 hp and 14 lb-ft versus the previous Cayenne Turbo). Standard Porsche Traction Management (PTM) all-wheel drive works with the new eight-speed Tiptronic S automatic transmission to improve acceleration, speed, and highway cruising comfort. The new Cayenne Turbo exceeds the previous Cayenne Turbo S in many areas. For example, it sprints to 60 mph in 3.9 seconds (or 3.7 seconds when equipped with the optional Sport Chrono Package, 0.1 second quicker than the previous Cayenne Turbo S) and boasts a higher top track speed of 177 mph. The turbochargers are arranged inside the cylinder V, in a "central turbo layout." The shortened exhaust paths between the combustion chambers and the turbochargers improve engine responsiveness and power delivery. This setup also creates a more compact package that is advantageous because it allows for a lower engine installation that helps to lower the center of gravity for improved handling characteristics.
Active chassis with three-chamber air suspension and staggered tires
The new lightweight chassis of the Cayenne Turbo helps improve driving dynamics versus its predecessor. In particular, the combination of a new three-chamber air suspension with the Porsche Active Suspension Management (PASM) active shock-absorbers extends the range considerably. By using three air chambers per spring strut, the chassis is able to map a wider range of spring rates than the previous system could, allowing for improvements in both comfort- and performance-focused settings.
With six selectable height levels, the ground clearance can be manually adjusted to suit the off-road terrain. These are also actively controlled via five new driving programs for on- and off-road use. The default setting is the on-road program. Four other modes activate the conditioning for mild off-road terrain: Mud, Gravel, Sand, or Rocks. The drive mode, chassis settings, and differential locks can be selected to adapt to the relevant setting.
Complemented by optional rear-axle steering, electric Porsche Dynamic Chassis Control (PDCC) roll stabilization connected to a 48-volt vehicle electrical system and Porsche Torque Vectoring Plus (PTV+), the new Cayenne Turbo achieves impressive driving dynamics. Sports car performance is an even greater emphasis in the new Cayenne than past models. Accordingly, the front and rear wheel sizes are staggered to measure 285/40 at the front and 315/35 at the rear. This produces even greater longitudinal and lateral power application for agile handing.
New Cayenne Turbo gets active aero and Porsche Surface Coated Brakes
The new Cayenne Turbo integrates an adaptive roof spoiler as a component of its active aerodynamics. Depending on the position, this optimizes efficiency, increases downforce on the rear axle, or shortens braking distances from higher speeds in the airbrake position. At full braking from 155 mph, the Cayenne Turbo comes to a stop up to 79 inches earlier as a result. The aerodynamic system therefore complements the effect of the new high-performance Porsche Surface Coated Brake (PSCB) which is included as standard with the Cayenne Turbo. The tungsten carbide layer applied to the cast-iron discs increases braking performance and wear resistance while reducing the amount of brake dust at the same time, meaning less dirt on the rims. The Porsche Ceramic Composite Brake system (PCCB) is still available as the top-performing option.
The new 2019 Cayenne Turbo will be available for ordering in the U.S. market in December, 2017 with arrival at dealers in Fall 2018. MSRP is $124,600 excluding $1,050 for delivery, and processing.
BMW's i lineup covers the extreme ends of the spectrum with the compact i3 and sporty i8. But a new concept shows BMW's i lineup could be getting something in the middle.
This is the BMW i Vision Dynamics which many believe previews the rumored i5 sedan. Visually, the Vision Dynamics looks like a futuristic version of the 4-Series Gran Coupe with a sloping roofline and small greenhouse. The front end has a 'unique' take on the twin kidney grille. BMW says it acts as an "intelligence surface," most likely hinting there are sensors being used for various systems such as self-driving. With an overall length just short of 190-inches, this puts the Vision Dynamics in the midsize category.
BMW is keeping quiet on the details for the Vision Dynamics' powertrain, only saying that it will hit 62 mph in under 4 seconds and have a total range of 373 miles. (Note: That is on the European Cycle. Expect a different number when it comes to the EPA Cycle).
Press Release is on Page 2
The BMW i Vision Dynamics. A new form of electrifying driving pleasure.
Just a year on from the presentation of its future-focused NEXT 100 vision vehicles, the BMW Group is introducing the electric mobility of the much more immediate future at the IAA Cars 2017 show in Frankfurt. The BMW i Vision Dynamics is a four-door Gran Coupe with a range of 600 km (373 miles), a top speed of over 200 km/h (120 mph) and acceleration of 0-100 km/h (62 mph) in four seconds.
Munich. Just a year on from the presentation of its future-focused NEXT 100 vision vehicles, the BMW Group is introducing the electric mobility of the much more immediate future at the IAA Cars 2017 show in Frankfurt. The BMW i Vision Dynamics is a four-door Gran Coupe with a range of 600 km (373 miles), a top speed of over 200 km/h (120 mph) and acceleration of 0-100 km/h (62 mph) in four seconds, and offers a look ahead to the e-mobility experience of the future with a new level of sporting elegance. “At the BMW Group, the future of electric mobility has already arrived,” says Harald Krüger, Chairman of the Board of Management at BMW AG. “We have more electrified vehicles on the road than any established competitor and are committed to expanding our activities in the field of electric mobility as part of our NUMBER ONE > NEXT strategy. By 2025 we will be offering 25 models with an electrified drive system – of which 12 will be pure-electric. With the BMW i Vision Dynamics we are showcasing how we envisage future electric mobility between the i3 and i8: a dynamic and progressive, four-door Gran Coupe. We are therefore electrifying the heart of the BMW brand and, at the same time, elevating BMW i into a totally new dimension.”
BMW i sets the pace of innovation.
BMW i is a byword for visionary vehicles and a new understanding of premium mobility focused squarely on sustainability. “BMW i is the innovation driver for the BMW Group,” explains Klaus Fröhlich, Member of the Board of Management at BMW AG, Development. “Here, visionary solutions and future-ready concepts become reality for the first time. But BMW i also acts as a spearhead of innovation for our other brands. The BMW i Vision Dynamics allows us to show right now what another electric BMW might look like. And BMW has demonstrated its talent for turning visions into real life throughout its history.”
The inspirational design of BMW i models is particularly effective in both flagging up the brand’s pioneering role visually and making it something people can experience. “With the i3 and i8 we have designed a revolutionary city car and a revolutionary sports car,” says Adrian van Hooydonk, Senior Vice President BMW Group Design. “And now the BMW i Vision Dynamics is combining electric mobility with the core values of BMW: dynamism and elegance. We are therefore demonstrating how the product range and the design language of BMW i can be evolved further into other concepts.”
“I do more with less” – the design identity of BMW i.
The outline of the BMW i Vision Dynamics represents a further evolution of the classical BMW proportions; a long wheelbase, flowing roofline and short overhangs create a basic profile brimming with elegance and dynamism. This silhouette is fleshed out by large, fluently contoured surfaces, the exterior appearing as if cut from a single mould. Aerodynamic requirements define the car’s progressive appearance down to its details. Barely visible joins and the flush integration of glass into the main body lend the study a modern and technical overall impression. The tension between large surfaces and finely worked details points to the innovative technology at the heart of the car in an understated yet intuitively appreciable way, rather than advertising it in grandiose fashion. And that is very much in keeping with the identity of BMW i: “I do more with less”.
Iconic window graphic symbolises the interior experience of the future.
Within the smoothly flowing, neatly aligned progression of the surfaces along the car’s flanks, the new characterisation of the window profile is a standout feature of the BMW i Vision Dynamics. This iconic styling cue, which made its debut on the first wave of BMW i models, is depicted here in a fresh, likewise function-led interpretation and also sharpens the identity of the car’s flanks. Their virtually symmetrical form allows all passengers an equally good view out, highlighting the attention paid to the passengers and the shared driving experience in the interior. This is something that will gain further in importance in the future, in particular as far as (semi-) autonomous and connected driving is concerned. The distinctive driving experience is further enhanced by the full-length glass surface running from the windscreen to the rear window. This heightens the sensation of room and enables a feeling of spaciousness and freedom inside the car that belies its dynamic exterior silhouette. Viewed from the outside, the unbroken roof graphic reinforces the enclosed, modern feel of the exterior thanks to seamless transitions through the front and rear end.
Familiar icons at the front gain new significance.
The prominent, enclosed “kidneys” in the minimalist front end bring together the past and the future of BMW in more than just styling terms. Where the BMW kidneys have previously acted as a symbol for the company’s expertise in drive system development, the BMW i Vision Dynamics deploys them as declarations of technological know-how. Indeed, underlying sensors turn the kidneys into an “intelligence surface”. The headlights similarly combine tradition and the future. The classical BMW four-eyed front end is reprised here in a very modern and pared-back interpretation, two intricate, freestanding LED light elements on each side of the car’s nose integrating all the necessary lighting functions, yet also providing an extremely striking look characteristic of BMW.
Poise and dynamic allure at the rear as well.
Smooth curves guide the car’s horizontal profile when viewed from the rear and add poise and power. The tapering of the passenger cell creates broad shoulders and a muscular presence. The most eye-catching feature of the rear end are the L-shaped lights. Their slim cut underscores the dynamic efficiency of the vision vehicle on a detailed level, while at the same time accentuating its wide stance on the road.
The BMW i Vision Dynamics exudes modernity, progressiveness and an appealing technical aesthetic from every angle. As a trailblazer for the BMW brand, it showcases very clearly the BMW Group’s future vision of emotionally engaging electrified mobility. Indeed, BMW will continue to focus its attentions on sporty and elegant vehicles in the years ahead.
Jaguar Land Rover's Special Vehicle Operations has been building up a reputation with high-performance and ultra-luxury models. They're hoping to add capable vehicles to that list with the debut of the Land Rover Discovery SVX.
SVX will be reserved for models that can go anywhere and this Discovery fits the bill. The chassis boasts a lifted air suspension with long-travel dampers and new knuckles; Hydraulic Active Roll Control that provides better wheel articulation, and a set of 20-inch forged-aluminum wheels wrapped in Goodyear Wrangler off-road tires. Land Rover's Terrain Response 2 system has been retuned for the SVX to provide maximum traction no matter the terrain.
Power comes from a supercharged 5.0L V8 with 518 horsepower and 461 pound-feet of torque. Power flows through a specially calibrated eight-speed automatic with a two-speed transfer box.
Outside, SVO has fitted new bumpers with skid plates, grille and side vents finished in black, orange tow hooks, and and an exclusive Tectonic Grey paint.
Land Rover says the Discovery SVX will go into production next year at SVO's Technical Center.
Source: Land Rover
Press Release is on Page 2
NEW DISCOVERY SVX - LAND ROVER REVEALS ALL-TERRAIN CHAMPION AT FRANKFURT IAA
Land Rover has revealed the Discovery SVX – the ultimate Discovery for off-road enthusiasts seeking epic adventures.
New Discovery SVX revealed at Frankfurt Motor Show is a production preview of the ultimate all-terrain Land Rover Discovery, with a 525PS 5.0-litre supercharged V8 petrol powertrain
Most extreme Land Rover yet, with go-anywhere capability – increased ground clearance, body and suspension lifts, more wheel articulation and large all-terrain tyres
Specially tuned Terrain Response 2 system and Active Roll Control are firsts for new Discovery
Discovery SVX will be the first Land Rover assembled by hand at the SVO Technical Centre when production begins in 2018
Prospective customers and Land Rover enthusiasts are invited to register their interest in new Discovery SVX at www.landrover.com
Frankfurt, Germany, 12 September 2017 – Land Rover has revealed the Discovery SVX – the ultimate Discovery for off-road enthusiasts seeking epic adventures.
Discovery SVX, launched at the Frankfurt Motor Show, adds extreme all-terrain capability to the Special Vehicle Operations (SVO) product triangle. SVX will sit alongside the acclaimed Range Rover Sport SVR and Range Rover SVAutobiography, which are hallmarks for outstanding on-road performance and supreme luxury respectively.
Discovery SVX will be the first Land Rover hand-assembled by expert craftsmen at the SVO Technical Centre in the UK when production begins in 2018.
John Edwards, Jaguar Land Rover Special Operations Managing Director, said: “SVO designers are embedded within the Land Rover team and have worked with our engineers to unleash their own passion for adventure to create another truly desirable and versatile vehicle in the Land Rover line-up.”
Discovery SVX embodies the design excellence and engineering integrity that are core values of every Land Rover, building on the legendary Land Rover all-terrain capability and adventurous spirit to deliver the ultimate in off-road performance and desirability.
Since its launch in 2016 the fifth-generation Discovery, built on Land Rover’s strong, safe and light aluminium architecture, has won admiration as the world’s best full-size versatile SUV. That makes it the perfect base for SVO’s first SVX vehicle. New Discovery is the first modern Land Rover to wear the SVX badge.
Mark Stanton, SVO Director, said: “The SVX product line gives us a fantastic opportunity to deliver the ultimate Land Rover all-terrain capability in a dynamic and distinctive manner, creating a rugged and versatile SUV that the whole family will love: effortless, unstoppable and connected, whatever the terrain.
“Discovery SVX is designed to reward off-road driving enthusiasts with the next level of all-terrain capability, without compromising comfort and practicality.”
SVX takes Discovery versatility to new levels through further development of its formidable off-road ability. It will be offered exclusively with Jaguar Land Rover’s 5.0-litre supercharged V8 petrol powertrain, tuned to deliver 525PS peak power and 625Nm torque, along with suspension modifications to enhance driver confidence when tackling the toughest terrain.
Hydraulic Active Roll Control (H-ARC), is new to Discovery on SVX. It gives increased wheel articulation and improved body control, enhancing extreme off-road traction while also reducing body roll for smooth and sure-footed on-road driving.
Discovery SVX has improved approach, departure and breakover angles, achieved by raising both the lightweight aluminium monocoque architecture and the four-corner air suspension system, employing long-travel dampers and revised knuckles, and fitting larger 815mm diameter 275/55 R20 Goodyear Wrangler all-terrain tyres on forged aluminium alloy wheels.
Tyres with higher side-walls reduce contact pressure and improve performance on soft surfaces. Combined with a more aggressive tread pattern, this improves grip in muddy conditions.
Discovery SVX is also equipped with active centre and electronic rear locking differentials which work with the specially tuned Terrain Response 2 system to optimise traction on all surfaces.
Complementing these hardware upgrades are unique software calibrations for the eight-speed automatic transmission with twin-speed transfer box, and Discovery’s dynamics systems including Hill Descent Control, Electronic Traction Control (ETC), Adaptive Dynamics, Dynamic Stability Control (DSC), All-Terrain Progress Control (ATPC) and variable ratio electric power-assisted steering (EPAS). Discovery SVX also features a model-first Pistol Shifter in place of the Drive select rotary shifter to offer the driver optimum control of gear selection in off-road manoeuvres.
To visually reflect Discovery SVX’s inherent robustness and go-further ability, Land Rover designers have referenced features of iconic Discovery off-road challenge vehicles, such as those used for Camel Trophy and G4 Challenge events, to give SVX a distinctive, aggressive and purposeful appearance inside and out.
Gerry McGovern, Land Rover Chief Design Officer, said: “The combination of design excellence and engineering integrity inherent in every Land Rover is the foundation of everything we do. The Discovery SVX reinforces Land Rover’s unrivalled reputation for building vehicles with true all-terrain capability for customers who desire the ultimate in off-road performance.”
The production preview SVX at Frankfurt IAA features unique front and rear bumpers with protective skid plates and exposed Rush Orange-finished metal recovery eyes – each rated to enable recovery of more than six tonnes, an anti-glare bonnet finish and an integrated rear-mounted electric winch system.
Discovery SVX also stands out through its exclusive satin Tectonic Grey paint finish, a unique colour and material combination of Lunar and Light Oyster with Rush Orange accents inside, and ‘X’ logo perforations on the SVX-branded seats. Unique Narvik Black side vents with V8 badging, a Narvik Black Dynamic grille, Black roof rails and a roof-mounted unit with two additional light pods for improved low-light visibility complete the transformation.
The first Land Rover SVX from SVO makes its world debut on the Jaguar Land Rover stand at Frankfurt IAA, 12-24 September, alongside a comprehensive range of Jaguar and Land Rover vehicles including SVO stablemates the Range Rover Sport SVR, Range Rover SVAutobiography Dynamic, Jaguar F-TYPE SVR and Jaguar XE SV Project 8.
Audi is very much synonymous with quattro all-wheel drive. But what happens when you take the quattro part of one of their vehicles, like the R8. You end up with the R8 V10 RWS (Rear Wheel Series) that debuted tonight in Frankfurt.
“A limited-edition special model for customers with an appreciation for essential driving enjoyment, the R8 V10 RWS is an absolutely exclusive offer. With its mid-mounted V10 engine and rear-wheel drive, it successfully brings the driving concept of our R8 LMS racing car to the streets,” said Stephan Winkelmann, CEO of Audi Sport GmbH in a statement.
By removing the all-wheel drive system, Audi was able to drop 110 pounds from the coupe and 88 pounds from the spyder. The RWS sticks with the base 5.2 V10 with 540 horsepower paired with a seven-speed dual-clutch transmission. Audi says the sprint to 62 mph takes 3.7 seconds in the coupe and 3.8 seconds in the spyder (0.2 seconds slower than the quattro models).
Visually, the RWS models come with a grille and airflow openings finished in matte black, a gloss back upper side blade, 19-inch wheels, and the option of a red stripe.
Only 999 R8 V10 RWS models will built with pricetags of 140,000 euros (about $167,544) for the coupe and 153,000 euros (about $183,102) for the spyder. No word on whether Audi will offer the R8 RWS for the U.S.
Press Release is on Page 2
Puristic driving dynamics: the new Audi R8 V10 RWS
First Audi production model with rear wheel-drive as a limited edition
50 kilograms (110.2 lb) lighter than R8 Coupé V10
Stephan Winkelmann, Managing Director Audi Sport GmbH: “R8 V10 RWS successfully brings driving concept of our R8 LMS racing car to the streets”
The Audi Sport GmbH is extending its R8 model series to include a new derivative with rear-wheel drive. The Audi R8 V10 RWS (Combined fuel consumption in l/100 km: 12.6 – 12.4, combined CO2 emissions in g/km: 286 – 283**) comes in a limited series of 999 units with both Coupé and Spyder variants. It will be rear-driven (Rear Wheel Series) and be built exclusively by hand at the Böllinger Höfe R8 factory.
“The R8 V10 RWS is made for purists,” said Stephan Winkelmann, CEO of Audi Sport GmbH. “A limited-edition special model for customers with an appreciation for essential driving enjoyment, the R8 V10 RWS is an absolutely exclusive offer. With its mid-mounted V10 engine and rear-wheel drive, it successfully brings the driving concept of our R8 LMS racing car to the streets.”
Matt black design elements, optional films
The puristic character of the new R8 variant is underscored by the matt black grille of the Singleframe and the matt black air apertures at the front and rear of the car. The upper sideblade (of the Coupé) is finished in gloss black, the lower blade in the body color. Similar to the R8 LMS GT 4, the Coupé is available with an optional red film running over the hood, roof and rear end. Inside, the driver and passenger sit in sport seats covered in leather and Alcantara. Bucket seats are available as an option. The dashboard bears an emblem “1 of 999,” indicating the limited number of units.
5.2 FSI engine – one of the last naturally aspirated engines in its segment
The mid-mounted V10 engine of the Audi R8 V10 RWS produces 397 kW (540 hp). It delivers its peak torque of 540 Nm (398.3 lb-ft) at 6,500 rpm. The 5.2 FSI engine accelerates the Coupé from 0 to 100 km/h (0 – 62.1 mph) in 3.7 seconds (Spyder: 3.8 seconds) and beyond to a top speed of 320 km/h (198.8 mph) (Spyder: 318 km/h [197.6 mph]). With the top closed, average fuel consumption of the R8 V10 RWS is 12.4 liters per 100 kilometers (19.0 US mpg), corresponding to 283 grams CO2 per kilometer (455.4 g/mi). With the top open, these figures are 12.6 liters (18.7 US mpg) and 286 grams CO2 per kilometer (460.3 g/mi).
Specially tuned chassis setup allows controlled drifts
The Coupé weights 1,5090 kilograms (3,505.3 lb) (without driver). 50 kilograms (110.2 lb) less than the R8 Coupé with all-wheel drive which needs additional components like propshaft, multi-plate clutch and center differential. The Spyder is 40 kilograms (88.2 lb) lighter than the R8 Spyder V10, weighing in at 1,680 kilograms (3,703.8 lb) (without driver). The axle load distribution of 40.6:59.4 (Coupé) and 40.4:59.6 (Spyder) together with chassis and handling tuning specially adapted for rear-wheel drive provide for incredibly fun driving.
The chassis setup and control systems allow controlled drifts if the driver chooses “dynamic” mode in the standard Audi drive select dynamic handling system and sets the Stabilization Control ESC to “Sport”. The ESC intervenes reliably at the limit. The electromechanical power steering is completely free of torque steer and enables precise handling. The Audi R8 V10 RWS rolls standard on black-finished, 19-inch, cast aluminum wheels in a five-spoke V-design, with 245/35 tires up front and 295/35 at the rear.
The Audi R8 V10 RWS will be available for order in Germany and other european countries from autumn 2017, and from the beginning of 2018 the first units will hit the streets.The Coupé starts at 140,000 euros, the Spyder at 153,000 euros.
And now for a hypercar with the heart of an F1 race car
For past few years, Mercedes' AMG division has been hard at work on building a hypercar that uses tech from Formula One. Last year, the company officially teased this project. Tonight at an event in Frankfurt, Mercedes-AMG revealed the Project One show car.
Let's get the big thing out of the way, the Project One has the same powertrain as the Formula One car: A 1.6-liter turbocharged V-6 with a split turbo and electric motor that's good for 670 horsepower and can rev to 11,00 rpm. Another electric motor is integrated with the turbocharger to help spin up the turbine and recapture wasted exhaust energy. Two more electric motors are used to drive the front wheels. Total output stands at 1,000 horsepower. The batteries are derived from the F1 car and are mounted towards the front to help with weight distribution.
Figures to be aware of with Project One:
0 to 200 kph (124 mph): 6 seconds
Top Speed: 217 mph
Can travel up to 16 miles on EV power alone
The chassis features inboard, pushrod suspension coilovers and a set of carbon-ceramic brakes. Center-lock, forged aluminum wheels have partial carbon-fiber shrouds to improve airflow for the vehicle.
Moving to the outside, it's clear Mercedes-AMG was focused on making the Project One very aero-friendly. There are numerous ducts, spoilers, and other aerodynamic aids to make the vehicle slice through the wind. An F1-style air intake sits on the roof to provide large quantities of air for the engine. The interior is very bare bones with the seats integrated into the carbon-fiber monocoque, F1-style wheel, and two 10-inch displays that act as instrument cluster and infotainment system.
Mercedes-AMG will begin production of the Project One in the second-half of 2019. Only 275 models will be built, each costing $2.75 million. Before you ask, all of the Project Ones have been snapped up.
Press Release is on Page 2
World première of the Mercedes-AMG Project ONE show car: Mercedes-AMG brings Formula 1 technology to the road
Frankfurt/Affalterbach. The Mercedes-AMG Project ONE will celebrate its world première at the International Motor Show (IAA) in Frankfurt/Main: for the first time, the two-seater supersports show car brings the very latest and efficient, fully-fledged Formula 1 hybrid technology from the race track to the road almost par for par to represent the highlight of AMG's 50th anniversary. This high-performance hybrid is said to produce over 1.000 hp and reach top speeds beyond 350 km/h. The show car combines outstanding race track performance and day-to-day suitable Formula 1 hybrid technology with exemplary efficiency. This is a world first. The overall responsibility for the realisation of Project ONE lies with Mercedes-AMG. The complex development work was carried out in close cooperation with the Formula 1 experts at Mercedes-AMG High Performance Powertrains in Brixworth and with the Mercedes-AMG Petronas Motorsport team in Brackley. Together with the four-door AMG GT Concept, the Mercedes-AMG Project ONE provides another insight into the future performance-hybrid drive strategy of the sports car brand within Mercedes-Benz.
Ever since the early days of motorsport, engineers have dreamed of bringing motor racing technology to the road. Mercedes-AMG is now making this dream a reality at the very highest level. "Motorsport is not an end in itself for us. Faced with intense competition, we develop technologies from which our production vehicles also subsequently benefit. We are drawing on our experiences and successes from three constructors' and drivers' world championships to bring Formula 1 technology to the road for the first time: in Mercedes-AMG Project ONE", says Dr Dieter Zetsche, Chairman of the Board of Management of Daimler AG and Head of Mercedes-Benz Cars.
"The Mercedes-AMG Project ONE is the first Formula 1 car with MOT approval. Our highly efficient hybrid assembly stems from motor racing and the electrically powered front axle generates a fascinating mixture of performance and efficiency. With a system output of over 1,000 hp and a top speed beyond 350 km/h this hypercar handles exactly as it looks: it takes your breath away", Ola Källenius says, Member of the Daimler AG Board of Management responsible for Group Research and Mercedes-Benz Cars Development.
The concept car gives specific indications of what to expect from the upcoming production model. "The hypercar is the most ambitious project we have every undertaken. It marks yet another pinnacle of the successful, strategic development of Mercedes-AMG towards a performance and sports car brand. Project ONE raises the bar in terms of what is currently technologically feasible and thanks to its combination of efficiency and performance it represents an absolute benchmark. At the same time, Project ONE provides an outlook on how AMG will define driving performance in the future", Tobias Moers explains as the Head of Management at Mercedes-AMG GmbH.
Powertrain: one turbocharged engine and four electric motors
The high-performance plug-in hybrid drive system of the Mercedes-AMG Project ONE comes directly from Formula 1, and was realised in close cooperation with the motorsport experts of Mercedes-AMG High Performance Powertrains in Brixworth. It consists of a highly integrated and intelligently networked unit comprising one hybrid, turbocharged combustion engine with a total of four electric motors. One has been integrated into the turbocharger, another has been installed directly on the combustion engine with a link to the crankcase and the two remaining motors drive the front wheels.
The 1.6-litre V6 hybrid petrol engine with direct injection and electrically assisted single turbocharging comes directly from the Mercedes-AMG Petronas Formula 1 racing car. The four overhead camshafts are driven by spur gears. To achieve high engine speeds, the mechanical valve springs have been replaced by pneumatic valve springs. The vehicle is mid-engined (ahead of the rear axle) and it can easily reach speeds of 11,000 rpm, which is currently unique for a roadgoing vehicle. However, for higher longevity and the use of commercially available Super Plus petrol instead of racing fuel, it remains significantly below the F1 engine speed limit.
The electric motors on the front axle are also true rev wonders, with rotor revolutions up to 50,000 rpm – current state of the art is a speed of 20,000 rpm.
The very high-revving engine is additionally boosted by a high-tech turbocharger. The exhaust gas and compressor turbines are separated from one another and located at an optimum position to the exhaust side and to the intake side of the V6 engine, and connected to one another by a shaft. This shaft features an electric motor with approximately 90 kW which, depending on the operating status, electrically drives the compressor turbine with up to 100,000 rpm – for instance when moving off or following load changes. The Formula 1 designation for this unit is MGU-H (Motor Generator Unit Heat).
Lightning-quick response, faster than a naturally aspirated V8 engine
The major advantage: the dreaded turbo lag – the delayed response to accelerator pedal commands owing to the inertia of the large charger – is completely eliminated. The response time is greatly reduced, and is even shorter than that of a naturally aspirated V8 engine. The electric turbocharger brings about another advantage: it uses parts of the surplus energy from the exhaust system to generate electricity, and either stores it in the high-voltage lithium-ion battery as part of recuperation or provides additional drive power by feeding it to an additional electric motor. This motor produces 120 kW, has been installed directly on the engine and features a link to the crankshaft via a spur gear (MGU-K = Motor Generator Unit Kinetic) – another technology that ensures maximum efficiency and performance in Formula 1.
New all-wheel drive with purely electrically driven front axle
There will also be two further 120 kW electric motors at the front axle. Each is connected to a front wheel via a reduction gear. The fully electrically driven front axle allows individual acceleration and braking of each front wheel, and therefore selective torque distribution (torque vectoring) for particularly high levels of vehicle dynamics. With the axle motors, we estimate that up to 80 percent of the braking energy can also be optimally used for recuperation under everyday driving conditions. This energy is stored in the battery and is available for a longer electric range. Each electric motor is controlled by its own power electronics located in close proximity to the electric motors in the floor assembly.
Top marks for thermal efficiency
The thermal efficiency of the combustion engine with electric turbocharger (MGU-H) in conjunction with the electric motor on the crankshaft (MGU-K) will be over 40 percent. This is a previously unattained peak value for series production vehicles, and confirms the dominant position of the drive system where efficiency is concerned. This means that the show car obtains significantly more drive energy from one litre of fuel than other cars. It is therefore both economical and powerful. By way of comparison, the thermodynamic efficiency of conventional series production engines is around 33 to 38 percent.
Technical data at a glance
Mercedes-AMG Project ONE show car
1.6-litre V6 with direct injection, four valves per cylinder, four overhead camshafts and electrically boosted single turbocharger, electric motor connected to the crankshaft
Rear-wheel drive output
> 500 kW
Front-wheel drive output
2 x 120 kW
> 740 kW (> 1,000 hp)
Variable AMG Performance 4MATIC+ all-wheel drive with hybrid-drive rear axle, electrically driven front axle and torque vectoring
Automated AMG SPEEDSHIFT 8-speed manual transmission
Acceleration 0-200 km/h
< 6 secs.
> 350 km/h
Lithium-ion battery with Formula 1 technology
The battery cells, their arrangement and the cell cooling system are the same as used in the Mercedes-AMG Petronas Formula 1 racing car. However, the quantity of battery cells in the AMG Project ONE will make it significantly more practical for everyday use. The lithium-ion, high-voltage battery and the DC/DC converter supporting and charging the 12 V onboard electrical system are space-savingly accommodated in the vehicle floor behind the front axle.
As a further innovation, the high-voltage EQ Power+ drive system operates with 800 volts instead of the usual 400 volts. Thanks to the higher voltage levels it is possible to influence elements, such as significantly reducing the cable diameters and accordingly saving design space and weight.
Intelligent operating strategies for optimum output and efficiency
Overall the high-performance EQ Power+ plug-in hybrid drive system offers numerous intelligent operating strategies which are optimally tuned to different application scenarios. The driving modes range from purely electric operation through to a highly dynamic mode which corresponds to a setting used in Formula 1 qualifying for optimum lap times. Despite the high system complexity, and depending on the current requirement, the driver will always receive the optimum combination of performance and efficiency. In this process, Mercedes-AMG engineers make use of the many years of experience and know-how from Formula 1, the SLS AMG Electric Drive and Daimler AG's research and development.
For instance, the driver can move off purely electrically, initially with just the electric motors on the front axle driving the hypercar and the electric motor on the crankshaft supporting short-term acceleration wishes. If the driver presses the accelerator more firmly and demands more output, the V6 engine also switches on. The drive system unfolds its full power as the engine speed increases. Impressive acceleration figures are possible with the Race Start function: acceleration from zero to 200 km/h takes under six seconds.
If the driver's foot leaves the accelerator again to let the car coast, the system switches to electric drive at the front axle – whilst braking under normal driving conditions recuperates up to 80 percent of the energy, which is fed into the battery.
Completely new, automated 8-speed manual transmission
Power is transferred to the rear wheels by an 8-speed manual transmission that has been entirely developed from scratch for the Mercedes-AMG Project ONE. It is activated hydraulically and can be operated in automated mode or manually using the shift paddles.
The basis for the outstanding driving characteristics of the Mercedes-AMG Project ONE is provided by the lightweight, high-strength carbon-fibre monocoque body, the technology of which likewise comes from Formula 1. The same applies to integration of the engine and transmission: both have load-bearing functions and completely support the rear suspension.
Multi-link suspension with innovative pushrod suspension
The suspension developers also gave their utmost. Multi-link designs are used at the front and rear. The adjustable coil-over suspension has several special features: Both push-rod spring struts have been installed across the direction of travel. The innovative arrangement of the spring/damper unit replaces the function and application of conventional tubular cross members. This solution reliably prevents rolling movements even during very rapid directional changes, without being uncomfortable.
The overall setup of the springs and dampers is configured for perfectly balanced, easily controlled and above all sporty handling characteristics. These are also assisted by all-wheel drive and torque vectoring. ABS is standard equipment, with ESP® adjustable in three stages as is usual for AMG. ESP® ON stands for a high level of safety, ESP® SPORT HANDLING MODE allows greater yaw angles before system intervention for a sporty driving style, and ESP® OFF switches the system off for sporty driving on enclosed racetracks.
Exclusive forged wheels with innovative carbon-fibre semi-cover
Another completely new development is the 10-spoke forged aluminium wheel with centre lock, which is exclusively reserved for the Mercedes-AMG Project ONE. This has a radial carbon-fibre semi-cover with an aerodynamically sophisticated shape: this improves the car's aerodynamics and Cd figure by optimising the airflow around the wheels.
At the same time, three flat ventilation slots per spoke section ensure optimum heat dissipation from the brakes. This is another example of how the AMG development team pays the utmost attention to even the smallest aspects, so as to improve the efficiency of the hypercar.
At the front the Mercedes-AMG Project ONE runs on 10.0 J x 19 dimension wheels and 285/35 ZR 19 Michelin Pilot Sport Cup 2 tyres which were exclusively developed for the hypercar and at the rear the vehicle features 12.0 J x 20 wheels running on Michelin Pilot Sport Cup 2 335/30 ZR 20 tyres.
The car is equipped with an advanced, weight-optimised ceramic high-performance compound braking system. Its low weight reduces the unsprung masses, thus improving driving dynamics and agility. Furthermore, the ceramic brakes are distinguished by a longer service life, higher corrosion resistance and higher thermal stability. The "AMG Carbon Ceramic" lettering and the specially painted brake callipers visually distinguish this unique braking system.
Exterior design: Beauty and the beast
The design of the show car is very obviously inspired by the premium class in motorsport. But above all, it embodies the Mercedes-AMG principle that fascination is always linked with function. Every part has a specific purpose. The result is a mid-engine concept, extremely muscular proportions with the cockpit well forward, large wheel arches, a wasp waist and an extended rear end.
"The Mercedes-AMG Project ONE is the hottest and coolest car we have ever designed. It combines our design philosophy of Sensual Purity with the performance of our Formula 1 racing cars and is the perfect embodiment of Performance Luxury," says Gorden Wagener, Chief Design Officer Daimler AG. "This hypercar's extreme design marks a milestone in design ‑ there are no lines, and the interior is stripped down to the essentials."
Front view: Powerful and functional
The front view is characterised by the large front apron, the various air inlets of which extend across the entire vehicle width. The trapezoidal centre section bears a large, white AMG logo. Above it, on the vehicle body, is the Mercedes star. The hallmark AMG A-wing below the centre section creates a silver-coloured highlight, and seamlessly transitions into the front wings.
On the left and right are large, prominent air inlets which are framed by U‑shaped flaps and each subdivided by two black horizontal fins. Flat LED headlamps blend seamlessly into the body contours.
The black air outlets in the bonnet guide the hot airflow around the sides of the driver compartment. This allows the flow of fresh air to pass unhindered across the driver compartment and into the intake tract on the roof. The downforce at the front axle is positively influenced by the automatically extending front splitter and the active ventilation louvres in the front wheel arches, contributing to the perfect aerobalance of the car.
Taut flanks, large wings
The low, dynamic greenhouse has an unmistakable, spherical architecture with a distinctive window pattern. The large, dark area stands for important technical functions. These technical components form a visual contrast to the clean overall lines of the vehicle.
The roof line is dominated by an air intake derived from Formula 1, via which the engine takes in large volumes of air. The black intake transitions elegantly into the black, vertical shark fin, which improves lateral stability when cornering at high speed. The rear window placed well to the rear is an integral part of the intake/roof-fin unit. It allows a view of the power unit. Two large NACA air inlets ensure optimum guidance of the airflows for the engine and transmission oil coolers located at the rear end.
The side view also shows a sensuous, clean surface design combined with functional features. The vehicle flanks are tautly recessed, with black carbon-fibre surfaces redirecting the airflow around the vehicle body as in motorsport.
The Petronas green paintbrush design on the flanks is the work of the artist who designed the paintwork for the Formula 1 racing car. All four wheels are spanned by tight-fitting, muscular wings that appear ready to leap into action.
As in motor racing, the doors open both forwards and upwards. The fuel filler flap is at the rear right, the charge socket for the plug-in hybrid battery at the rear left.
Rear end: Fascination and function
The sharp, vertical spoiler lip and the large, two-section diffuser, which is interrupted by the central exhaust tailpipe, as well as the two-stage extendible rear aerofoil, contribute to aerodynamic efficiency and performance at high speeds. The design of the exhaust tailpipe with its large, round outlet and two further small, round apertures was adopted directly from the Formula 1 cars.
The muscular appearance is further enhanced by the rear apron with its large, black mesh and carbon-fibre components. The rear lights each feature three rhomboid lighting elements to echo the graphic design of the AMG brand logo, and therefore also the design of the headlamps.
Interior: Formula 1 for two
The interior design concept of this ultimate driving machine follows function on the racetrack, and this is expressed in the radical design idiom. Formula 1 technology is made authentically tangible on both the race track and the road. Here too every detail has a function, with nothing included merely for visual reasons. In the monocoque interior, the reduced components are emphasised in minimalist style both in design and functional terms.
The ergonomically contoured interior has room for two occupants. The bucket seats with adjustable backrests are integrated into the monocoque. The pedals and steering wheel are adjustable, allowing the driver to adopt the ideal driving position. The centre tunnel visually separates the driver and passenger areas from each other. It blends fully into the seat sculpture and follows the principle of minimalism with its gently rising contour.
Interior with functional structural parts
The lightweight construction is also obvious from the slim, wing-like profile of the dashboard. It appears to be light and free-floating. As a functional, structural component it also rigidifies the monocoque of the Mercedes-AMG Project ONE. The two high-resolution, free-standing 10-inch displays (one slightly raised in front of the driver, the other on the right of the centre console angled towards the driver) are adapted with high-quality and weight-optimised solid metal components.
The double-nozzle ventilation unit is suspended under the centre screen like a gondola. The screen and nozzles form a single unit, emphasising the lightweight design principle of the whole. The displays' rectangular basic form is echoed by the ventilation nozzles, and by the centre console in which the start/stop button is located.
Also seamlessly integrated as a unit are a high-quality stowage compartment, a reduced switch array and the engine start button. The stowage compartment is fitted with a transparent lid.
Formula 1-style steering wheel
The steering wheel with flattened upper and lower sections and an integrated airbag offers motorsport functionality, as do the two integrated controllers which can be used to set adjustment functions, such as the driving modes and suspension setup, or the LED shift display in the upper steering wheel area.
The door panels are in functional, high-grade carbon-fibre, and integrate smoothly into the sporty interior. As if to mirror the aero winglets of the exterior, the door panelling is visually interrupted to create space for technical implements and a generously concave door centre panel. An aluminium cassette combines the air vents and power window switches, which are integrated as deeply recessed rectangles.
Stowage compartments behind the seats, screen replaces interior mirror.
Neither have the Mercedes-AMG developers forgotten suitability for everyday use and operating convenience: small items can be stowed in two compartments on the left and right behind the seats. An air conditioning system and power windows are standard equipment, while the COMAND infotainment system ensures optimum connectivity.
The user interface is integrated as an autonomous concept. The most important information is displayed on the road in the line of vision above the steering wheel, so that the driver is not distracted. To ensure optimum visibility to the rear, the rear-view mirror is replaced by a screen showing real-time images of the rear from a mirror cam. The aluminium screen housing is fully integrated into the roof, and also holds other controls.
Colours and materials from the racing car
The choice of colours and materials takes its inspiration from the Mercedes-AMG Petronas Formula 1 racing car. The sculptured racing seats are in slip-resistant black microfibre, creating an unmistakable association with motor racing. The seat surfaces are interspersed with nappa leather in magma grey and inlays in a sporty textile mesh which optimally assists the air circulation of the seats. There is also yellow contrasting topstitching.
The Mercedes-AMG Project ONE: the future of driving performance
Conclusion: The Mercedes-AMG Project ONE will not only be an ultimate driving machine that directly brings current Formula 1 hybrid technology onto the road and combines top-class race track performance with full day-to-day suitability. Its purpose is also to obtain extensive findings about performance-oriented plug-in hybrid drive technology, further developments of suspension layouts and extended onboard electronics that will later benefit series production AMG cars. The Project ONE team is working hard on successfully bringing this vision onto the road.
Another auto show season is upon us with the Frankfurt Motor Show this week. Before the doors open at the show tomorrow, Volkswagen is holding their group day preview event where the various brands roll out their debuts.
For Volkswagen, the big debut is the I.D. Crozz II Concept. Volkswagen has made some slight changes for concept since its first showing at the Shanghai Auto Show back in the spring. The front end features a new headlight design that kind of looks like an eye. The two-tone paint comprised of red and sliver helps make the concept pop. One area that may confuse some folks are the doors. The front are hinged conventionally while the rear are sliding.
A pair of electric motors - each mounted on an axle - are projected to produce a total output of 302 horsepower. Range stands at 311 miles (500 Kilometers).
Volkswagen says the production version of the I.D. Crozz will go into production in 2020 along with the regular I.D. Rumor has it that the Crozz will be the first I.D. model we see in the U.S.
Press Release is on Page 2
Volkswagen Group Night at the IAA 2017: Volkswagen brand presents the new I.D. CROZZ
Volkswagen CEO Dr Herbert Diess: "The Volkswagen Brand will be investing 6 billion euros in electric mobility over the next five years."
Further developed zero emission SUV concept vehicle offers a look forward to the production model of 2020
The countdown has begun for a breakthrough in electric mobility, and 2020 could represent the turning point. That is because the Volkswagen brand is accelerating into this new era by developing a new generation of innovative electric vehicles – the I.D.2, I.D. BUZZ3 and I.D.CROZZ. Dr Herbert Diess, Chairman of the Volkswagen Brand Board of Management, had this to say at the Volkswagen Group Night: "The Volkswagen Brand will be investing 6 billion euros in electric mobility over the next five years. Our task is to make modern technology available to many people. This is especially important in times of technological transformation. One thing is clear: The Golf of the future must once again be a people's car!"
Traditionally, Volkswagen hosts a Group Night event on the evening before the International Motor Show (IAA) opens in Frankfurt, at which it presents its innovative new products. On this occasion, the Volkswagen brand is presenting the new I.D. CROZZ in a world premiere. The further developed electric concept vehicle is part of the electric campaign in which Volkswagen will be expanding its electric car model range – initially with three models from 2020. In 2025 the Volkswagen Brand will already be offering 23 all-electric models.
The new I.D. CROZZ is a crossover of an SUV and a four-door coupé, which has been further improved towards a production implementation. This can be seen, for instance, in various design changes to the front and rear ends of the concept car that is painted in 'Hibiscus Red Metallic'. The I.D. CROZZ makes a powerful and masculine impression with its wide bonnet, cleanly contoured wings and roof with a high-gloss black exterior finish. The striking design of the LEDs of the headlights also point the way towards production and generate an unmistakable light graphic.
The interior has also been re-equipped and further developed – as an Open Space – with a superior amount of space and highly versatile seating concept. B-pillars were omitted in the I.D. CROZZ, so that the large swinging and sliding doors can be opened wide, and it is even possible to transport a crossbike without any trouble.
Always ensuring a supply of clean air in the interior, regardless of ambient conditions, is the CleanAir system that has been newly developed by Volkswagen. The menu provides information on the quality of the air in the car and on the system's current activity. In addition, the updated I.D. CROZZ is equipped with a new voice assistant, which enables opening and closing of the doors via voice command. It is also possible to activate or deactivate the fully automated driving mode 'I.D. Pilot' by voice instruction.
The I.D. CROZZ is a sporty, zero-emission all-round vehicle that is designed to be interactive, and whose electric 4MOTION all-wheel drive system is as impressive on unpaved trails as it is in adverse weather conditions. One electric motor works at the front axle and one at the rear, and torque distribution is controlled via an 'electric propshaft'. The driving range of the SUV that outputs 225 kW (system power) and boasts a top speed of 180 km/h is up to 500 kilometres (NEDC) on one battery charge. The high-performance battery can be charged to 80% of its energy capacity in 30 minutes using a fast-charging system.
An ideal weight distribution between the two axles is achieved by centrally integrating the battery within the I.D. CROZZ and having the two drive system units at the front and rear. This enables the new I.D. CROZZ to demonstrate handling characteristics on a par with those of a Golf GTI. Playing a significant role here are the running gear with electronically controlled dampers, a new multi-link rear suspension design and also newly developed MacPherson struts.
The future generation of the I.D. family will extend the Volkswagen model range. In 2020, Volkswagen will already launch the compact, all-electric, four-door I.D. in the Golf segment, while launching the modern I.D. CROZZ in the SUV segment. In addition, the I.D. BUZZ – a re-interpretation of the legendary Volkswagen Bulli – will enter the market in 2022. All three I.D. concept cars share the new 'all-electric architecture' that was developed as a common platform and a completely new and avant-garde design. Other characteristics are zero-emission driving ranges up to 600 kilometres, a large amount of space, compact exterior dimensions and digitalisation of all displays and controls. In addition, the new and innovative 'vw.OS' operating system, which enables fast software updates and upgrades, will support each member of the I.D. family – in a way similar to the usual updating methods for smartphones.
BMW's Concept X7 iPerformance made an early debut this week due to a leak and the response could be summed up as eww. Today, BMW has officially revealed the concept before its debut at Frankfurt and we highly doubt opinions are going to change.
Cartoonish and polarizing are the words we would use to describe the Concept X7 iPerformance. The front end features the largest twin-kidney grilles which makes it look it has a set of buck teeth. This is emphasized by the narrow headlights and massive bumper vents. The side profile at first glance reminds of the Toyota Land Cruiser/Lexus LX 570 with a large area of glass and similar styling for the rear pillars. Massive 23-inch wheels fill in the large wheel wells.
The interior layout is similar to what you'll find on the 5- and 7-Series models, albeit with some futuristic touches such as the steering wheel. A large screen on the center stack houses the infotainment system while a 12.3-inch screen facing the driver provides a digital instrument cluster. The concept features seating for six people.
As this concept bears the iPerformance nomenclature, it means there is a hybrid powertrain under the hood. BMW doesn't say much about the powertrain aside from there being a turbocharged gas engine and the ability to plug the vehicle in to recharge the battery.
A production version of the X7 will be arriving next year.
Press Release is on Page 2
BMW Concept X7 iPerformance
A new dimension in spaciousness.
Munich, Germany - September 8, 2017... With the unveiling of the BMW Concept X7 iPerformance at the IAA Cars 2017 show in Frankfurt, the BMW Group is not only pulling back the covers on a new model concept for the luxury segment, it is also introducing a whole new take on luxury for the BMW brand. The Concept X7 iPerformance embodies this understanding of luxury in the form of a striking exterior composed of intently focused lines, and combines it with a generously-sized, six-person interior pared down to the essentials: elementary forms, high-class materials and a state-of-the-art infotainment system brimming with connectivity. The Concept’s iPerformance badge denotes the presence of groundbreaking BMW eDrive technology allied with a BMW TwinPower Turbo petrol engine to create an exceptionally efficient and dynamic plug-in hybrid powertrain that excels in all driving situations – including running with zero local emissions.
A taster of the production version.
This study car offers a look ahead to the future production model set to make its debut in 2018. The forthcoming BMW X7 forms part of the largest model offensive in the company’s history. As part of its NUMBER ONE > NEXT strategy, the BMW Group is seeking to substantially increase its sales and revenues in the luxury class. The BMW X7 has a key role to play here, as Ian Robertson, Member of the BMW AG Management Board responsible for Sales and Brand BMW explains: “Since BMW founded the Sports Activity Vehicle segment with the first X5 back in 1999, every subsequent X vehicle has broken new ground. The BMW X7 continues this tradition: the X family’s new top model extends BMW’s offering in the luxury class and redefines the concept of luxury for the BMW brand and beyond. It also embodies one of the most important elements of our corporate strategy NUMBER ONE > NEXT, to grow our presence in the luxury class. Furthermore, the BMW Concept X7 demonstrates it’s perfectly possible to combine a large sports activity vehicle with an electrified drivetrain.”
A case study in modernity, luxury and presence.
The status of the BMW Concept X7 iPerformance as a luxury-class BMW SAV is instantly apparent. The spectacular exterior, imposing dimensions and skilfully judged proportions endow it with an extraordinary sense of presence and an ultra-modern aesthetic fused with innate dynamism. “The Concept introduces the BMW Sports Activity Vehicle DNA into the luxury segment. The new BMW design language employs just a few, extremely precise lines and subtle surface-work to raise the bar in terms of presence and prestige,” explains Adrian van Hooydonk, Senior Vice President BMW Group Design. “The BMW Concept X7 iPerformance has a luxurious and sophisticated feel to it, thanks to its understated use of forms and incredibly precise details.”
The luxurious character of the BMW Concept X7 iPerformance is brought alive by its cabin, in particular. The vehicle’s sheer size forms the basis for an interior experience unmatched by any BMW past or present. As a result of the interplay between precise, pared-down forms and an open sense of space, the driver and passengers find themselves immersed in a very modern setting with an equally exclusive feel. The wealth of possibilities offered by personalised, digital connectivity allows the vehicle’s interior to be turned, as desired, into a personalised place of either retreat or productivity.
A contemporary feeling of lightness in the interior.
Inside the roomy cabin of the BMW Concept X7 iPerformance, clear forms, warm colours and select materials combine to create a highly exclusive, sophisticated ambience. In addition, the large panoramic roof provides a remarkable amount of room above the occupants’ heads while also giving the interior a light and airy, open-to-the-sky feel. The six amply proportioned seats are arranged in three rows, and four of them have an exclusive individual design. Secured to the vehicle floor by nothing more than a slender seat base, the individual seats allow those sitting directly behind to enjoy generous legroom. The dark, olive-bronze leather – with discreet gold pigmentation – covering the seat bolsters carries the air of exclusivity through to the finer details and the Smoke White leather adorning the remainder of the seats provides an intriguing contrast. The shell-like backs of the individual seats are likewise trimmed in leather and serve to enhance the high-class, contemporary ambience.
A perfect ensemble of materials and colour.
The dark shoulder line running underneath the windows traces a continuous horizon throughout the cabin that brings fresh calmness to the bright interior. Decorative materials are deployed sparingly. Having said that, the selective use of open-pore ash in a dark-stained, matt finish sets the seal on the natural material experience. Matt and polished aluminium elements have likewise been carefully incorporated to add further classy touches. And the luxurious sense of spaciousness enjoyed from all seats is reinforced to subtle effect by strands of laser light in the roof and the dynamic ambient and contour lighting.
Minimalist forms in the driver’s cabin.
Amid the modern and pared-back design of the interior is the driver focus familiar to BMW customers. The forms and surfacing of the instrument panel, centre console and doors allow them to “wrap around” the driver. And the raised seating position provides unbeatable all-round visibility and an exceptional view over the road. The new BMW design language, featuring amply-sized surfaces and clear edges, gives the instrument panel a “reduced to the essentials”, modern aesthetic. The 12.3-inch instrument cluster screen and central touchscreen information display are sited at close quarters to one another. The effect is of one unbroken – and smartly sophisticated – display. A new operating concept allows interactive use of the two displays. Below them, in the centre stack and centre console, the grouping of functions within the clean and tautly chiselled surfaces underscores the minimalist approach. Partially backlit crystal glass in the dark Silver Night shade lends sophisticated flourishes to control elements like the selector lever, iDrive Controller and multifunction buttons on the steering wheel.
Personalised infotainment through the seamless integration of the owner’s digital world into the car.
The two individual seats in the second row offer all the benefits of the front pair. The first sign of an attachment between the panoramic roof and body comes comfortably to the rear of the second row of seats in the form of a Y structure, which means the passengers in the centre row experience the same sensation of freedom and lightness as those in the front. Second-row passengers also enjoy personalised infotainment comfort courtesy of the rear-seat entertainment system’s touchscreen monitors. Here, the BMW Concept X7 iPerformance showcases the BMW Group’s vision of seamless integrating the customer’s digital world into the car via BMW Connected. For example, passengers here have access to highly personalised, digital services such as their choice of infotainment / office content, with which they can make their journey more comfortable, more entertaining or more productive. And content can even be shared with others on board. For instance, they can send a track to the car’s music system by touch gesture, forward an interesting article to the next-door display for the person sitting alongside them to read or transfer an address from their email directly to the car’s navigation system. Interactive LED choreography via the doors and instrument panel traces the communication flow between the rear screens and the display at the front of the cabin.
Impressive size and presence – the exterior.
The expansive exterior of the BMW Concept X7 iPerformance projects the exclusive experience available inside the car confidently to the outside world. Clear, vertical proportions with significant ground clearance identify the Concept as an X model without the need to look twice. At the same time, the Concept speaks its own, unmistakeable design language – a new one for BMW – through an array of details and design features which set it apart clearly from previous models. Viewed from any angle, the interplay between a small number of precise lines and artfully sculpted surfaces sends out a charismatic statement of modernity, presence and exclusivity.
A new face in the BMW X family.
The front end of the BMW Concept X7 iPerformance is one of its most eye-catching angles, the vehicle’s height alone ensuring it rises prominently over the road. In an all-new interpretation of classical BMW elements, the front-end design groups together the various facets of the vehicle into a powerful visual statement. The large, vertical kidney grille at the heart of the upright front-end silhouette hogs the attention. The grille frame and bars are single-piece and solid in design, as if hewn from a single piece. Look at it again, though, and fascinating contrasts emerge between gleaming edges and matt surfaces, all of which breathes extra vibrancy and class into the frontal impression.
The upper sections of the slim, elongated twin headlights with BMW laser light link to the large kidney grille. A blue X signature in BMW laser light provides a confident pointer to the Concept’s membership of the SAV family from BMW. The headlights and kidney grille combine to create an exciting contrast of horizontal dynamism and vertical solidity, bringing traditional BMW front-end design cues into the future. Large, tautly sculpted surfaces surround the familiar BMW design icons, underlining the car’s cohesive and muscular front-end aesthetic.
A prominent bar extends across the full width of the front apron in its lower section, before rising vertically to frame the outer air intakes at their upper edge. This lends the front end additional stature. Quasi-vertical aero lips further accentuate the car’s powerfully assured stance on the road. Customary X features like the trapezoidal bumpers and underguard, meanwhile, are merely hinted at, their understated design serving the cause of clear and exclusive surfacing.
From the side, the BMW Concept X7 iPerformance cuts a sumptuous figure, complete with the characteristic ground clearance of X vehicles. The nigh-on vertical front end, striking and almost vertical rear and steeply rising angle from the rear wheels to the tailgate give the muscular proportions a modern flourish. The high-set lines of the flanks bring an expressive confidence to the car’s silhouette. And the long shoulderline stretches the car and injects an athletic tension to the flanks. It also separates the car’s body into the light and airy glasshouse (which offers a preview of the large interior) and the muscular metal forms.
For the first time in an X vehicle, the wheel arches feature a circular cut and emphasize the exclusivity and elegance of the flanks. Smart and precise surfacing absorbs the powerful wheel arches in an aesthetic movement. The surfaces gain in volume and strength as they head towards the rear end, further underscoring the subtle dynamism of the car when viewed from the side.
Bold accents in the flanks.
A conspicuous chrome strip in the door sills provides an exclusive counterpoint to the car’s long, stretched shoulderline and sophisticated surfaces below. As with the trim element at the front end, the chrome strip in the car’s flanks frames the Air Breathers in a vertical accent, before continuing in a straight line to the rear end. These surrounds for the front, side and rear air apertures create a geometrically precise impression and lend the car a sense of robust solidity.
The exclusive exterior colour shade Manhattan metallic immerses the car’s surfaces and forms in a dark olive-bronze that highlights the confident styling of the flanks with sophisticated flair. With their bold multi-spoke design, the 23-inch light-alloy wheels combine the muscularity for which BMW’s X models are renowned with the exclusivity of a luxury BMW sedan, while aerodynamically optimised inlays between the spokes reduce drag. Added to which, conspicuous aero lips at the front and rear also ensure improved airflow around those areas of the car and send out a powerful visual message of the plug-in hybrid drive concept’s efficiency. A bird’s-eye view of the BMW Concept X7 iPerformance reveals a particular highlight. Like the side window surrounds, the panoramic roof is framed by an eye-catching chrome strip, which extends from one A-pillar to the rear end – and back around the other side. In between, the roof’s transparent, Y-shaped supporting structure adds a modern flourish.
Power, presence and exclusivity at the rear.
The rear of the BMW Concept X7 iPerformance sends out an impressive statement of powerful authority and exclusive elegance. The imposing size of the vehicle’s body – the key to its huge swathes of interior space – is particularly clear when viewed from the rear. Vertical aero lips mark out the rear of the car clearly from the flanks. Within the upright rear silhouette, the slim rear lights break up the body volumes and a classy chrome bar connects the two lighting elements. The boldly designed lights create a three-dimensional L shape and bring a technical, high-quality flavour to the rear. As at the front of the car, the surfaces frame the lights like jewels. Between the wheel arches, the rear apron with practical tailgate opening provides a strong platform for the rear structure. The absence of tailpipe embellishers in the rear apron is an indicator of the vehicle’s plug-in hybrid drive concept. And the subtle, body-coloured underguard ensures the rear concludes its progress towards the road in stylish fashion.
When Mini held a trial period for the Mini E back in 2009 and 2010, there was the thought that Mini was close to launching an electric vehicle. But that did not happen as what was learned from this would be used for the BMW i3.
At long last, Mini will be launching an electric vehicle in near future. Before that, the automaker will be previewing the model as a concept at next month's Frankfurt Motor Show.
The electric concept looks like a somewhat futuristic version of the current Cooper hardtop model with a streamlined front, handles integrated into the doors, odd looking wheels, and the taillights forming the Union Jack using LEDs. There is no information about the electric powertrain. Hopefully, we learn more when it debuts next month.
Press Release is on Page 2
MINI presents pure-electric design study at the IAA: the MINI Electric Concept, complete with iconic design and urban driving fun.
Munich, Germany, August 29, 2017. MINI is using the IAA Cars 2017 show in Frankfurt am Main to showcase its take on future personal mobility in the city – in the form of the MINI Electric Concept. Designed for use in urban areas, this concept car offers a window into how pure-electric day-to-day mobility might look in the years ahead. And the
MINI Electric Concept also brings the iconic design, city-dwelling heritage and customary go-kart feeling of the MINI brand into the electric mobility age. MINI will present an all-electric series-production model in 2019.
“The systematic electrification of the brand and product portfolio is a mainstay of the BMW Group’s NUMBER ONE > NEXT strategy. The MINI Electric Concept offers a thrilling preview of the all-electric production vehicle. MINI and electrification make a perfect match,” remarks Harald Krüger, Chairman of the Board of Management of BMW AG.
Urban mobility is ingrained into the MINI brand’s DNA; the city is its natural habitat. Indeed, this environment and the specific demands it places on a car provided the canvas from which the MINI design team brought the MINI Electric Concept to life. The responsive drive system, sublimely judged suspension tuning and use of aerodynamic add-ons produce driving dynamics very much in the MINI mould and a fine operating range. It all comes together to make the MINI Electric Concept a highly attractive, zero-emission solution to the current challenges facing personal mobility in our cities and their surroundings.
“With its characteristic go-kart feeling and powerful electric motor, the MINI Electric Concept is great fun to drive while also being completely suitable for everyday use – and producing zero emissions to boot. That’s how we at MINI envisage electric mobility in tomorrow’s world,” says Peter Schwarzenbauer, Member of the Board of Management of BMW AG, responsible for MINI, Rolls-Royce and BMW Motorrad.
MINI – blazing a trail for electric mobility at the BMW Group.
It has been nearly ten years since MINI took a significant, pioneering step with the MINI E – and laid the foundations at the BMW Group for the development of electric mobility solutions to production readiness. The MINI E unveiled in 2008 was the first all-electric car from the BMW Group to be driven by private users in everyday traffic conditions – as part of an extensive field trial. Over 600 MINI E cars entered service worldwide for the purpose of the field studies. All of them helped to gain vital insights into the use of pure-electric vehicles, and this knowledge was subsequently incorporated into the development of the BMW i3. The MINI E also offered driving fun in spades, thanks to outstanding acceleration and handling.
The British premium brand’s first series-production model with a plug-in hybrid drive system was presented in spring 2017 in the shape of the MINI Cooper S E Countryman ALL4. The new model variant enables electric and therefore locally emission-free mobility for the first time. The all-electric MINI Electric Concept represents a seamless continuation of this bloodline. In the future, all electrified products from the MINI brand will be grouped together under the “MINI Electric” banner.
Unmistakably MINI – the design.
“The MINI Electric Concept is a quintessential MINI – compact, agile, simply the ideal companion for everyday driving. At the same time, it conveys a whole new take on the concept of sportiness,” explains Adrian van Hooydonk, Senior Vice President BMW Group Design. “Indeed, aerodynamics and lightweight design aren’t just important in the world of motor sport; they are also essential factors for maximising electric range. The car’s surfaces have a sense of precision and contemporary clarity about them that lends added impact to the car’s efficient character. Plus, striking accents and vivid contrasts give the exterior that distinctive MINI twist.”
A front end brimming with character.
A hexagonal radiator grille and circular headlights make the MINI Electric Concept instantly recognisable when viewed from the front. Even from the outside, it is obvious that this car has an electric heart. Identifying features include the vividly contrasting silver and yellow colour scheme reminiscent of the earlier MINI E, as well as the distinctive E badge. Besides this, the radiator grille and headlights have been reinterpreted to reflect the emission-free drive technology under the bonnet. As the electric drive unit requires very little cooling air, the radiator grille is closed for superior aerodynamics. A Striking Yellow accent bar in the grille – with an E badge in the same colour – produces a powerful contrasting effect, which is echoed by the styling of the daytime running lights in the all-LED headlight assemblies.
The highly expressive add-on parts in the front apron highlight the dynamic character of the MINI Electric Concept, at the same time as increasing its range with their aerodynamic benefits. The front apron’s simulated “air intakes” are also sealed, yet they still include dark louvres that look like cooling fins and inject some added technical flair. The crisp lines of elements such as the LED headlights and fibreglass structures contrast with the expanse of clear surfaces, and lend the front as a whole a very sophisticated look.
Compact and agile – the flanks.
The contrasting blend of colours, smooth surfaces and precisely contoured details continues into the MINI Electric Concept’s flanks. Clearly moulded fibreglass add-on parts along the lower edge serve to intensify the car’s snappy proportions. The car’s silhouette is composed of taut, clean-cut surfaces, producing a minimalist impression that exudes efficiency. The elements below the surfaces help to convey a feeling of restrained power and understated athleticism. The paint finish in Reflection Silver – a matt liquid metal colour shade – showcases the surfacing to exceptional effect and thereby focuses the spotlight on the model’s lightweight and sophisticated character.
Material and colour highlights take a light-hearted approach to softening the technical appearance of the car’s flanks, as well other areas of the car. A large yet discreet “E” badge above the front wheel provides another tell-tale sign of the power source. The interplay between matt and high-gloss surfaces within a family of colours results in a progressive look with a puristic and classy feel. Further “MINI E” badges are integrated into the radiator grille and exterior mirror caps. Colour gradients in the accent shade Striking Yellow, incorporated into both the roof and side skirts, add further flourishes. The colour of the roof flows from matt white to high-gloss yellow, while the yellow of the side skirts gains in transparency as it rises, appearing to merge into the body colour. These colour gradients accentuate the concept car’s lightness and modernity.
Innovative 3D printing.
The design of the dark-coloured 19-inch wheels adds another visual highlight, picking up on the idea of the radiator grille’s accent bar and reinterpreting it in asymmetrical form. The aerodynamic inlays – made using a 3D printing process – echo the fibreglass structure of the air deflectors and inject the wheels with great aesthetic appeal. The recessed louvred surfaces in the simulated air intakes were also produced using a 3D printing method. These two elements emphasise the light and modern character of the MINI Electric Concept, while at the same time illustrating the opportunities offered by 3D printing in terms of producing functional design elements for vehicle styling and customisation
Clarity and dynamism – the rear end.
The rear of the concept car also marks it out as a thoroughbred MINI. Its wide stance on the road is striking in a sporty way, without lapsing into excessive flamboyance. The upper section is dominated by clear surfaces, but the rear takes on a far more dynamic aspect as it cascades down. This familiar approach from MINI, where the car’s volume steadily increases from the top down, makes the shoulders appear broad and athletic. The rear light assemblies constitute yet another standout visual feature and provide a clear pointer to the car’s British roots. Framed within the classic MINI outline, they each form one half of the Union Jack as an LED dot matrix. The rear apron features aerodynamic elements similar to those at the front, including air deflectors and a fibreglass diffuser. These reinforce the car’s efficient dynamism on both a visual and functional level. There is also a yellow accent strip that provides a striking colour contrast when the car is viewed from the rear, while simultaneously announcing the presence of an electric drive system. This is further underlined by the absence of exhaust pipes and the dark louvred surfaces in the simulated air outlets.
Cutting-edge, pure and dynamic (in an efficient way), the MINI Electric Concept encapsulates MINI’s near-term vision of an all-electric car designed for urban mobility in a changing world.
Weighs as much as a freight train, goes like a bullet train
It has been 15 years since Bentley unveiled the Continental GT. Since that time, the British automaker has been making tweaks and changes to keep it in the spotlight. But there comes a point where you need to start anew. Last night, Bentley pulled the sheets off the second-generation Continental GT.
The EXP 10 Speed 6 Concept is very evident as an inspiration for the redesigned Continental GT's design. A blunt nose features a large, rectangular mesh grille. The side profile comes with flared wheel arches for the front fenders and sculpted rear haunches. Around back are a set of taillights shaped like ellipses. Bentley has changed up the proportions of the Continental GT via a longer wheelbase and the front wheels pushed 5.3-inches forward.
You would expect Bentley to roll out the red carpet when it comes to the Continental GT's interior and they do. A sea of leather, metal, and wood finishes gives off an air of ultimate luxury. Bentley took Porsche's idea of putting the climate control and other functions around the transmission selector. But the piece de resistance of the GT is with the 12.3-inch infotainment screen. When you enter the vehicle, the screen is hidden by a piece of wood veneer. Press the start button and the screen rotates forward. But that's not all. You can rotate the screen to a third side with three analog dials—a temperature gauge, compass, and chronometer.
Under the hood lies an upgraded 6.0L W12 engine with 626 horsepower and 664 pound-feet of torque. This is paired with a new eight-speed dual-clutch automatic and AWD. Despite a curb weight of 4,947 pounds (which is about 170 pounds less than the outgoing GT), Bentley says the new Continental GT can hit 60 mph in a mind-jarring 3.6 seconds and reach a top speed of 207 mph.
Underneath the skin, the Continental GT uses the modular MSB architecture that first debuted on the Porsche Panamera. There is also the Bentley Dynamic Ride system that uses a 48-volt electrical system to control electronic actuators on the anti-roll bars to reduce body roll when cornering. A three-chamber air suspension system can provide either a smooth or sporting ride.
Pricing hasn't been announced, but expect to see the Continental GT arrive at dealers sometime next year.
Press Release is on Page 2
THE ALL-NEW BENTLEY CONTINENTAL GT – THE DEFINITION OF LUXURY GRAND TOURING
Third generation of the peerless Continental GT: the definitive luxury Grand Tourer
A statement of true luxury: bold, sculptured exterior design
Innovative luxurious interior offers unrivalled Grand Touring refinement
Designed, engineered and handcrafted in Britain
Seamless integration of handcrafted, natural materials and cutting-edge technology
Revolutionary Bentley Rotating Display and digital instrument panel
Enhanced version of renowned 6.0-litre W12 TSI engine delivers 635 PS (626 bhp) and 900 Nm (664 lb.ft.)
0-100 km/h in 3.7 seconds (0-60 mph in 3.6 seconds); top speed of 333 km/h (207 mph)
Dual-clutch, eight-speed transmission for faster, more efficient performance
(Crewe, 29 August 2017) Bentley Motors is today announcing full details of its new Continental GT, the definitive Grand Tourer.
Designed, engineered and handcrafted in Britain, the new third-generation Bentley Continental GT combines spirited, focused performance with handcrafted luxury and cutting-edge technology, to create the finest Grand Tourer ever produced.
Wolfgang Dürheimer, chairman and chief executive of Bentley Motors, said: “Bentley has been at the forefront of luxury Grand Touring for nearly one hundred years. The new, third-generation Continental GT is the pinnacle of our design and engineering achievements and marks the next step in Bentley’s journey.
“We are the world leader in luxury mobility and our products and services define new luxury in the automotive world. The new Continental GT encapsulates our desire to innovate as well as celebrate our heritage and take the Bentley ownership experience to the next, unparalleled level.”
At the heart of the new Continental GT sits an all-new, enhanced version of Bentley’s renowned 6.0-litre, twin-turbocharged W12 TSI engine, mated, for the first time, to a dual-clutch eight-speed transmission, for faster, more efficient gear changes.
A new, technically advanced, adaptive chassis uses Bentley’s intelligent 48-volt Dynamic Ride System to ensure a responsive ride and exceptional handling and refinement in all road conditions. The new system controls ride comfort and lateral roll, cushioning passengers from excessive movement as well as making the car feel effortlessly precise.
The muscular exterior design, created using revolutionary technology, results in a lightweight, yet stiff, body. The engine is positioned further back to improve weight distribution, resulting in driver-focused, dynamic performance.
Offering four seats and improved luggage capacity for genuine real-world usability, the new Bentley Continental GT’s luxurious cabin is packed with exquisite details such as a new ‘diamond in diamond’ leather design. In addition, significant work has gone into harmonising the extensive portfolio of 15 colours across hides and carpets.
The new Continental GT also showcases major evolutions in Bentley’s unique application of technology. An advanced, fully digital, driver-focused instrument panel and Bentley Rotating Display for the driver are among the suite of innovations. The latter features an impressive 12.3” touchscreen housed in a three-sided unit, which revolves the veneer to reveal the touchscreen as well as three elegant analogue dials.
The interior design of the Continental GT is tailored specifically to the modern luxury customer, with unrivalled attention to detail that creates an effortless ownership experience. The cabin seamlessly integrates cutting-edge onboard technology with the finest handcrafted natural materials. The result is an exquisite, harmonised, connected and luxurious space.
The new Continental GT will make its global debut at the IAA Frankfurt Motor Show between 12 and 24 September, 2017.
The Evolution of Bentley’s Famous Design DNA
The exterior design of the new Continental GT is based on a bold new vision that is unmistakably Bentley. The all-new body and materials save more than
80 kg over the previous Continental W12 body.
While the Continental GT retains the classic elegance that made its forebear so popular, the form of the new car is more sculptural and sharply defined and takes much of its inspiration from the critically acclaimed EXP 10 Speed 6 concept car.
To allow for such a bold reimagining of the Continental GT, the aluminium skin has been crafted using Super Formed technology – a precision technique working with aluminium heated to 500°C which has previously been used on Bentley fenders. This method allows designers to invoke more complex, sharply defined body lines and a deeper, sculpted haunch muscle.
The Continental GT is the first production car ever to have an entire body side made from the Super Formed process.
The Continental GT’s profile is longer and lower due in part to the positioning of the front wheels 135 mm further forward, which in turn allows the bonnet to be extended and the nose to be lowered. However, the key signature lines of the original Continental still dominate, with the ‘power line’ travelling from the headlights to the muscular rear haunch.
The rear of the car is a radical styling departure, with the taillights now shaped into ellipses, reflecting the silhouette of the exhaust tail pipes below them.
The lighting on the Continental GT uses the latest LED Matrix technology, but it is the design of the head lamps that truly sets them apart. Inspired by the finest cut-crystal glasses, the internal surfaces are transparent with sharply defined edges that catch the light like a diamond.
The result is similar to that of an illuminated gem – an effect which is magnified when the optional welcome sequence gradually illuminates the headlights as you approach the car. The taillights also feature the cut-crystal effect, highlighting the three-dimensional depth of the optics.
The new Continental GT has 21” wheels as standard, with two styles available, reflecting in turn the model’s elegant and sporting characters. A 22” lightweight, forged wheel is also offered, alongside a hand-finished option, which allows for a twisted polished finish.
In another example of Bentley’s exacting attention to detail, and the unique way in which Bentley design often serves a dual engineering purpose, the elliptical exhausts have a complex perforated sleeve which adds visual detail but also reduces the exhaust temperature.
The new Continental GT customer has a class-leading portfolio of 17 exterior paint colours to choose from – carefully selected to complement the character and lines of the car. In addition, a limited extended range of colours will be offered at launch, as well as the option of full bespoke colour-matching for Bentley customers.
The Finest Handcrafted Cabin: A World of Hidden Delights
The interior of the new Continental GT showcases Bentley’s unrivalled expertise in the authentic use of materials, from the highest-quality natural leathers, to rare, sustainably sourced veneers – including Koa, Bentley’s newest veneer – and hand-polished chrome details. For the first time, unique dual-veneer options are offered. Over 10 square metres of wood are used in each Continental GT, and it takes nine hours to create and fit the wooden inlays by hand.
The exquisitely styled dashboard of the new Continental GT is sculpted by long, flowing wings that mirror the shape of the Bentley badge. A floating leather top flows seamlessly to the doors.
The centre console is finished to match the lower fascia, but can be specified in a new technical finish that is inspired by the delicate mechanical surfacing inside the finest automatic Swiss watches, known as Côtes de Genève. This surface – a first in the automotive world – is machined onto 0.6 mm-thick aluminium and is created by machining from side to side to create a linear pattern. Each row is 5 mm wide and machined at an angle to give a truly three-dimensional finish, with each pass of the machine making a minute step of 0.5 mm.
New types of luxurious haptic finishes adorn the interior of the Continental GT for greater sensory, as well as visual, enjoyment. In some areas, pillow knurling replaces the traditional mechanical knurling, for a softer, more refined feel on switches and controls, while diamond knurling adds a luxurious touch using a detailed three-dimensional faceted surface.
The new knurling design is available on the iconic Bullseye vents, bezels and other primary control rotaries, and not only gives a finely faceted visual impact but provides a precise technical feel when operating the controls.
Another hidden delight is the addition of bronze inserts between surfaces on the primary controls, which adds a level of fine detailing never seen before.
The 20-way adjustable seats in the new Continental GT set new industry standards in comfort and refinement. Smooth centre panels allow maximum efficiency for the cooling, heating and massage functions, while the bolsters retain the signature Bentley quilting.
A new, unique quilt is also available: called a ‘diamond in diamond’ quilt, the effect is of a floating quilted surface in a sea of leather, which is extraordinarily soft to touch. The new interior pattern features both stitching and embroidery. The inner diamonds are embroidered, using a specially-designed machine that balances high speed with quality. Eighteen months were spent developing the embroidery, individually optimising and programming the exact alignment of each one of the 712 stitches that make up each diamond shape – an unrivalled attention to detail.
A choice of three audio systems is offered in the new Continental GT. The standard system features 10 speakers and 650 Watts, while a Bang & Olufsen 1,500 W, 16-speaker system with illuminated speaker grilles is aimed at lifestyle-oriented customers. The new Bang & Olufsen installation benefits from the first automotive application of the BeoSonic system – a new way for tone setting with a simple, intuitive one-touch user interface.
A Naim 2,200 W, 18-speaker system with Active Bass Transducers built into the front seats and eight sound modes is offered for the true audiophile.
In order to ensure optimal audio enjoyment, laminated acoustic glass is used for the windscreen and side windows, resulting in a nine-decibel reduction in exterior noise ingress versus the outgoing model.
Behind the wheel, the technological advancements in the new Continental GT are striking. The driver-orientated instrument panel is now fully digital and configurable by the driver. While the main dials appear to be real, they are in fact digital graphics designed to look three-dimensional. This display can show information from across the infotainment system including satellite-navigation information.
The Continental GT features the innovative and industry-first Bentley Rotating Display. At first glance there appears to be no screen in the centre of the dashboard. Instead, the veneer flows uninterrupted across the dashboard, while a thin chrome bezel behind the steering wheel surrounds a digital instrument display.
When the engine start button is pressed, however, the veneer in the middle of the dashboard glides silently forward and rotates to reveal Bentley’s largest-ever touchscreen, a 12.3” retina-quality digital MMI display, elegantly designed by Bentley with a customer-configurable home screen with three windows able to display the driver’s preferred functions, for example, navigation, media and telephone.
The user interface is designed to be akin to a modern mobile phone and menus are structured to be instantly intuitive.
The third side on the Bentley Rotating Display reveals three elegant analogue dials displaying outside temperature, a compass and chronometer. Such an innovative use of traditional elements underscores Bentley’s unique commitment to the past and the future, and offers customers the choice of digital or analogue display or clean, calm cabin.
The new Continental benefits from features designed to keep both driver and passengers connected at all times. Apple CarPlay, the smartest and quickest way to integrate the functionality of Apple devices in a car is connected via a USB port.
Customer journeys are streamlined with features designed to improve navigation. Google point of interest search makes finding unusual destinations simple, while real time traffic information keeps the driver informed of current length or changes in congestion. In emergency situations, Private eCall provides instant access to emergency services for ultimate peace of mind when travelling.
Sublime Power: The Beating Heart of Bentley
The new Continental GT is offered at launch with an enhanced version of Bentley’s peerless 6.0-litre, W12 TSI engine that sets a new benchmark in performance.
Designed, developed and handbuilt in Crewe, the W12 TSI engine is the most advanced 12-cylinder engine in the world. The unique ‘W’ configuration means that the engine is 24 per cent shorter than an equivalent V12, benefitting weight distribution and maximising usable cabin space.
The new powertrain uses the very latest engine management technology, with 300 million software calculations per second. It produces 635 PS (626 bhp) and 900 Nm (664 lb.ft.) of torque, and accelerates the new Continental GT to 100 km/h in 3.7 seconds (0-60 mph in 3.6 seconds), and on to a top speed of 333 km/h (207 mph).
A dedicated Sport Launch mode delivers maximum acceleration through careful clutch pressure sensing and pre-loading when a race-style start is required by the driver.
The W12 TSI combines high-pressure direct fuel injection with low-pressure injection. The combination of these two systems maximises refinement, lowers particulate emissions and optimises power and torque delivery. At 278 g/km CO2 (a 16 per cent improvement over the previous Continental GT), the engine also meets Phase 2 of Euro 6 and US ULEV 125 (LEV3) emissions targets.
The new engine utilises Start-Stop technology and, in Bentley’s advanced application, coasting is also made possible. The engine rests not only when the vehicle is stationary but also at near-to-stop speeds.
Bentley’s Variable Displacement system shuts down half of the engine under defined conditions. Intake and exhaust valves, fuel injection and ignition are all shut down on defined cylinders, with the engine running as a six-cylinder for improved efficiency.
Significantly, a new dual-mass flywheel replaces the torque converter, to dampen out the oscillations of the driveline and provide a fittingly smooth power delivery for luxury touring.
The dual-clutch eight-speed transmission provides smooth acceleration, and impressively quick gearshifts, both hallmarks of the Continental GT’s dynamic character, as well as improved combined fuel economy (23.2 mpg or 12.2 L/100 km versus the previous model’s 19.9 mpg or 14.2 L/100 km).
Shift times are variable and depend on the selected driving mode. In Sport mode, shifts are seemingly instantaneous to deliver uninterrupted torque delivery and maximum acceleration performance. In Comfort mode, shifts are deliberately relaxed to allow for a seamless and imperceptible gear change.
Maximum speed is reached in sixth gear, with the seventh and eighth gears acting as overdrive gears for relaxed cruising.
A new Active All-Wheel-Drive System replaces the traditional 40:60 power delivery split between front and rear wheels respectively, instead varying the front-to-rear torque split dependent upon the driving situation. The vehicle will use rear-wheel drive as much as possible during normal driving for optimum efficiency and dynamic performance.
Based on the conditions and the driver’s behaviour, the system will send drive to the front axle as required. This reduces the understeer effect from fixed all-wheel drive, as well as increasing driver engagement for those who revel in the dynamic attributes of the Continental GT.
Unrivalled Grand Touring Ride and Handling
The third generation of Continental GT features Bentley Dynamic Ride, an advanced 48-volt roll control system for unrivalled car control. The system controls and adjusts the electronic actuators on the anti-roll bar of each axle and so improves handling and ride comfort, as well as making the car feel lighter and more precise.
This system instantly counteracts lateral rolling forces when cornering and ensures maximum tyre-to-road contact to deliver class-leading ride comfort and exceptional handling.
While conventional anti-roll bars present a compromise between body control and ride comfort, Bentley’s active system provides variable torsional resistance, allowing the Continental GT to be both dynamically capable and comfortable for all occupants at all times. The use of a 48-volt system results in silent, instantaneous responses and sufficient power on hand to deal with all road surfaces.
Through Bentley’s Drive Dynamics Control different modes can be selected: Comfort mode, Bentley mode or Sport mode; the suspension, engine, gearbox and other chassis systems will modify to match the selected drive mode. Alternatively, the driver can personalise his or her own dynamic settings.
The air suspension on the new Continental GT is revised and uses three-chamber air springs which give the car 60 per cent more air volume in the softest setting than the previous model. This allowed Bentley’s engineers more scope for tuning the suspension to improve the ride comfort and dynamic character of the car. The system offers the scope to vary from sporting spring stiffness to luxury limousine refinement depending upon which mode the driver has selected.
Electric Power-Assisted Steering (EPAS) is also featured on the Continental GT. The new system improves feedback to the driver, while providing isolation from unwanted road disturbances. The steering system features a variable rack ratio, allowing increased response with higher steering angles to aid manoeuverability whilst maintaining excellent stability at high speeds. The introduction of EPAS also allows the Continental GT to be offered with a wide range of Driver Assistance features including Active Lane Assist, Traffic Jam Assist and Park Assist.
Another key feature is the latest-generation Continuous Damping Control (CDC), which constantly adjusts the damper forces to optimise comfort. The system continually measures the velocity and distance between the wheels and the body at each corner and also adjusts the air volume in the springs if necessary to ensure the optimum balance of comfort and handling. Both front and rear axles are of a lightweight aluminium construction, with multilink design at the front and rear.
The brakes, as always on the Continental GT, are bigger on the front axle, with a 15 mm increase in size to 420 mm to match the increased performance.
The exhaust tail pipes have also been revised, and now have an adaptive valve for greater tuning potential.
Bentley Personalisation Options and Mulliner Bespoke
The all-new Continental GT redefines personalisation and bespoke luxury. Paint, leather, veneer and lifestyle options are virtually unlimited and tailored to the individual.
The standard palette alone comprises 17 exterior paint colours, with up to 70 hues available in the extended range. There are also 15 luxurious carpet options, eight different handcrafted veneers (with a further four dual-veneer options) and 15 choices of interior trim hide, which means that customers are able to specify their own choice of luxury finish.
Two technology option packs are offered at launch: City Specification for urban journeys and the Touring Specification for long-distance driving, both curated to optimise the customer experience. City Specification includes hands-free boot opening, pedestrian warning, traffic-sign recognition and city braking systems as well as a top-view camera. The Touring Specification pack, meanwhile, offers adaptive cruise control with traffic-jam assist, active lane assist, a heads-up display, night vision with an infrared camera, and pre-sense braking.
The Mulliner Driving Specification adds a more sporting look to the car with 22” lightweight forged alloy wheels, unique ‘diamond in diamond’ quilting, embroidered Bentley emblems, additional veneer options, a jewelled-finish fuel filler, sports pedals and indented leather headliner. Customers can also choose personalised stitching in the front and rear of the car and personalised treadplates.
As with all Bentleys, the Continental GT can also be handed over to the highly skilled and dedicated craftspeople at Mulliner, Bentley’s personal commissioning division, who will respond to bespoke customer requirements.
Extreme Conditions: Global Testing for the Perfect Grand Tourer
Bentley’s highly skilled engineers have put the new Continental GT through the extraordinary rigours of extreme hot and cold weather testing – as well as durability tests – around the globe to ensure the new Grand Tourer triumphs in all driving conditions, covering nearly one million kilometres.
A demanding and thorough development drive programme put the new Continental GT through cold-climate testing in polar areas, hot-weather testing in America and durability testing on the grueling roads in South Africa; as well as tests in the Middle East, China and Europe.
A team of expert Bentley development engineers led the testing in Sweden for serious sub-zero driving on frozen lakes and in snow. In America, testing also took place in the below sea-level ‘oven’ of Death Valley with temperatures approaching 50 degrees Celsius for a trial covering thousands of kilometres.
Whether Porsche purists want to admit it or not, the Cayenne is an important model. For a time, it was Porsche's best selling model - the Macan holds that title now. The model also generates a fair amount of profit for the company. With new and redesigned competitors arriving, Porsche decided it was time to introduce a new Cayenne.
The new Cayenne is somewhat boring to look at, especially when compared to the last-generation model. The front and sides mimic the Macan, while the back is inspired by the upcoming Panamera Sport Turismo. It might become a bit more exciting when other models such as Turbo are launched down the road. Overall size grows by three inches to 194. The wheelbase remains the same 114 inches as the last-generation model.
The Panamera's influence can fully be seen inside as the Cayenne features a 12.3-inch display in the center stack and touch controls around the console. A pair of 7-inch displays flank the center tachometer to provide key details such as trip info and navigation.
For the timebeing, the Cayenne will only be offered with two turbocharged engines. The base model gets a 3.0L turbo V6 with 340 horsepower and 332 pound-feet of torque. S variants get a 2.9L twin-turbo V6 with 440 hp and 406 lb-ft. Both come paired with a eight-speed automatic.
Performance figures are as followed,
Cayenne: 5.6 seconds (0-60 mph), 14.2 seconds (quarter-mile), 152 mph (top speed)*
Cayenne S: 4.6 seconds (0-60 mph), 13.2 seconds (quarter-mile), 164 mph (top speed)*
*Figures are with the optional sport chrono package
Porsche says this is most agile Cayenne yet, thanks to Porsche Dynamic Chassis Control electronic roll stabilization system (with a 48-volt electrical system), three-chamber air suspension, and rear-wheel steering.
Surprisingly, Porsche was able to drop 143 pounds from the new Cayenne. This is due to extensive use of aluminum and a lithium-ion polymer starter battery (which saves about 22 pounds).
The 2019 Cayenne arrives at Porsche dealers next summer with prices of $66,750 (Cayenne) and $83,950 (Cayenne S). Both prices include destination.
Press Release is on Page 2
Third Generation Porsche Cayenne Models Make Global Debut in Stuttgart-Zuffenhausen
New engines, new chassis, innovative control concept, and increased connectivity
Atlanta, Georgia. Today Porsche unveiled the new 2019 Cayenne. The all-new Cayenne builds on the formula that started in 2003 while pushing performance boundaries even further through new technologies that significantly improve on-road performance and comfort. The new Cayenne is more athletic both in appearance and driving performance due to new styling cues and engineering developments. In line with the its modern exterior, the interior carries many of the same design cues and new technologies that made their debut on the 2017 Porsche Panamera.
Among the many changes, optional rear-axle steering creates a virtual reduction of the wheelbase at low speeds and a virtual lengthening at high speeds for improved agility and stability. Available Porsche Surface Coated Brakes (PSCB) offer even greater stopping power and reduced brake wear. Every new generation Cayenne model will come with a turbocharged powertrain and all-wheel drive that complement the new lighter weight platform.
Performance: New Powertrains and Standard Equipment
Porsche will offer two models at launch: the Cayenne and Cayenne S. Both are powered by turbocharged six-cylinder engines. The Cayenne uses a 3.0-liter single-turbo V6 making 340 horsepower and 332 lb-ft of torque, enabling it to accelerate from zero to 60 mph in 5.9 seconds (or 5.6 seconds with the optional Sport Chrono package). The new Cayenne is also capable of running the quarter-mile in 14.4 seconds or 14.2 seconds with the Sport Chrono package, and it is able to reach a top track speed of 152 mph. The Cayenne S uses a 2.9-liter twin-turbo V6 that makes 440 horsepower and 406 lb-ft of torque. It is able to accelerate to 60 mph from a standstill in 4.9 seconds (or 4.6 seconds with the optional Sport Chrono package) and continue on toward a top track speed of 164 mph. The Cayenne S quarter mile times drop to 13.3 seconds (or 13.2 seconds with the Sport Chrono package) .
A newly-developed eight-speed Tiptronic S transmission is standard across the Cayenne line. It offers improved comfort and quicker response times in its lower gear range for improved performance both on- and off-road. Meanwhile, an intentionally long eighth gear allows for relaxed cruising. The long gear is designed to complement the performance-minded lower ratios with the option for comfortable highway cruising. Driver-selectable transmission programming further enhances how the Cayenne handles on varied terrain. The default setting is the on-road program. Four other modes activate the conditioning for mild off-road terrain: Mud, Gravel, Sand, or Rocks. The drive mode, chassis settings, and differential locks can be selected to adapt to the relevant scenario. Fully variable Porsche Traction Management (PTM) all-wheel drive is standard on all Cayenne models. The system offers excellent performance characteristics while also providing extensive traction on rough ground.
Chassis: Fundamental Improvements Start With Structure
The third-generation Cayenne has a newly-developed lighter weight chassis that contributes to an overall weight savings of up to 143 lbs versus the previous generation, even with extensively increased standard equipment. Following the Porsche 911 and Panamera models, the new body of the Cayenne also uses an intelligent combination of alloy and steel. The exterior is made almost entirely of aluminum as are the floorpan assembly, front section, and virtually all the chassis components. One particular technical highlight is the innovative lithium-ion polymer starter battery, which alone accounts for a weight saving of 22 lbs.
Compared to its predecessor, the new Cayenne incorporates major technological and mechanical developments which greatly enhance performance. This starts with the chassis and progresses to a separated link design for the front axle, a multilink rear axle, and – for the first time with the Cayenne – staggered front and rear tire sizes ranging in diameter from 19 to 21 inches that help to improve on-road driving dynamics. The choice to use a staggered tire setup in this generation underscores the fact that the Porsche Cayenne is designed to be the sports car within its segment.
Enhancing both agility at lower speeds and handling at high speeds, rear-axle steering is available as an option. This technology reduces the turning radius at low speeds for easier maneuverability by turning the rear wheels out of phase with the front axle. At higher speeds, the rear wheels turn in phase with the front axle to provide a virtual lengthening of the wheelbase to improve roadholding and directional control.
Porsche Active Suspension Management (PASM) offers familiar variable damping settings found in other Porsche cars. It will be standard equipment on the Cayenne S and an option on the Cayenne. In addition to PASM, a new three-chamber air suspension is also optionally available which furthers the range of comfort- and performance-oriented settings. The new system increases air volume versus the previous system and offers a finer degree of specific calibration through the addition of a third air chamber. Finally, available Porsche Dynamic Chassis Control (PDCC) adds stabilizer bars that are now controlled via a 48-volt electrical system for greatly improved responsiveness versus hydraulic management.
When equipped, all of those systems generate data that are analyzed centrally, in real time, by Porsche 4D Chassis Control. This technology debuted with the second-generation Panamera. The system works to make virtually instantaneous adjustments, optimizing handling even further. With the exception of the active PASM damper system, all other chassis systems are new developments.
Dynamic design language: wider appearance and larger wheels
The new Cayenne retains a strong visual connection to its predecessors. At the same time, it adopts new design elements that hint at how this generation builds upon its predecessors. New horizontal light edges create a wider, more athletic appearance as do enlarged air intakes in the front fascia. The wheelbase remains unchanged at 114 inches, while overall length increases slightly to 194 inches and width (with side mirrors folded) is 78 inches. Cargo area volume with the rear seats raised increases by almost 15 percent over the previous generation to 27.19 cubic feet. When closed, the rear fascia features a new three-dimensional LED light design that features the Porsche logo spanning the width of the vehicle through a narrow strip of lights.
Broadly speaking, LEDs are a main feature of the new Cayenne and are standard on all models. Customers may also choose to upgrade from the standard headlights to either the Porsche Dynamic Light System (PLDS) or LED Matrix Beam headlights, which also include PDLS.
World premiere: Porsche Surface Coated Brake with tungsten-carbide layer
Porsche Surface Coated Brake (PSCB) technology is the latest example of Porsche assuming a pioneering role in developing high performance brakes. This world-first is available as an option for all Cayenne models and consists of a cast-iron disc with a tungsten-carbide coating. The finish increases friction values while reducing wear and brake dust. The brakes – which are exclusive to Porsche – will take on a visually impressive glossy appearance complimented by white painted calipers. The PSCB system is only available in combination with 20-inch and 21-inch wheels. The Porsche Carbon Ceramic Brakes (PCCB) remain the top system available.
New Sport Chrono Package with PSM Sport
The new Cayenne utilizes the redeveloped Sport Chrono Package which reflects the design first employed in the 918 Spyder. The Mode button on the steering wheel is one clear indicator of this approach. As well as the Normal, Sport, and Sport Plus driving modes, the driver can select an individually configurable mode. Pressing the Sport Response button in the center activates the most performance-oriented engine and transmission mapping for 20 seconds. The Sport Chrono Package also includes a separate PSM Sport mode, in which the driver can utilize a wider range of the new Cayenne’s driving dynamics.
Digital evolution: Porsche Advanced Cockpit and new PCM
The newest version of Porsche Communication Management (PCM) makes its way into the new Cayenne, ushering into the model line a new level of connectivity. At the heart of the new display and control concept from Porsche is the 12.3-inch full-HD touchscreen, launched last year with the new Panamera.
A range of digital functions can be operated intuitively through touch and also voice controls. The standard Porsche Connect Plus allows subscribers to have access to services including online navigation with real-time traffic information. The analog controls on the new center console are focused on the main functions of the vehicle. Other buttons are integrated into the smartphone-like, glass-look touch surface, which gives acoustic and haptic feedback when operated. In typical Porsche style, the driver has a central analog tachometer to view. This is flanked by two 7-inch full-HD displays showing relevant driving data that can be selected and changed using the multi-function steering wheel. Cayenne customers may specify a variety of available assistance systems as well that include Night Vision Assist, which uses a thermal imaging camera to detect pedestrians and animals before they are visible to the naked eye. Lane Change Assist, Lane Keep Assist including traffic sign recognition, traffic jam assist, ParkAssist including Surround View, and Porsche InnoDrive including adaptive cruise control are also available.
PCM also offers the ability for a great degree of customization by saving preferred settings and menu layouts including up to six individual profiles. In addition to a large number of interior settings, a profile is used to store specifications for lights, driving programs, and assistance systems. Depending on the equipment, each driver can also apply his or her own settings to the new sound systems from Bose® and Burmester®.
A new Off-road Precision App, specially developed for the Porsche Cayenne, is now also available as part of Connect Plus. It allows rough-terrain drives to be documented in detail, helping the driver to improve her or his own skills using video recordings.
Pricing and U.S. market availability
The 2019 Cayenne and Cayenne S models are available to order with a base MSRP of $65,700 and $82,900 respectively, excluding the $1,050 delivery, processing and handling fees. They will reach U.S. dealers midway through 2018.
BMW's i3 has been primarily focused on efficiency. But 2018 sees the German automaker introduce a performance-oriented version.
Making its debut next month at the Frankfurt Motor Show, the 2018 BMW i3s comes with a slightly boosted electric motor (184 horsepower and 199 pound-feet of torque, up from 170 and 184 respectively). BMW's engineers have also modified the motor controls and tapered roller bearings to improve performance at the top end. The end result is an improved 0-60 mph time of 6.8 seconds (7.2 seconds for the standard i3) and a top speed of 100 mph.
Other performance tweaks include a lowered suspension, widened track, revised tuning for the springs and anti-roll bars, and a tweaked stability control system.
Aside from new model, the i3 has some other changes in store for 2018. Design tweaks include the A-pillar being finished in a gloss black, restyled bumpers, and LED headlights. The optional 33.2 kWh battery pack introduced last year will now become standard on all 2018 models.
No word on pricing, but expect the 2018 i3 to launch late this year.
Press Release is on Page 2
The New BMW i3 and First Ever BMW i3s
Enhanced exterior design giving the BMW i3 a wider and sportier look.
First-ever BMW i3s featuring a sportier chassis, wider track and
higher performance output.
Featuring state-of the-art connectivity with the latest iDrive 6 interface.
Now featuring standard Full LED headlights.
New color offerings now include Melbourne Red Metallic and Imperial Blue Metallic.
Exclusive new cloth-leather trim combination ‘Giga Brown Natural Leather & Carum Spice Grey Cloth’ now available.
Woodcliff Lake, NJ –August 28, 2017… BMW is pleased to announce the latest BMW i3 including the first ever BMW i3s, as part of the BMW i portfolio which entails the most awarded models in the automotive history. The BMW i3 is the bestselling compact battery-electric vehicle in the premium compact segment worldwide since it was launched in 2014. The design of the new BMW i3 and the exclusive first-ever BMW i3s has been altered to enhance the sporty, urban built yet elegant design of the model. Featuring a wider track, wheel arch molding and design lines that are vastly horizontal, the 2018 BMW i3 models have morphed into a versatile, urban, innovative efficiency mobility vehicle. For the first time, BMW also offers a more powerful and sportier version of the BMW i3 - the BMW i3s, which can also be equipped with a Range Extender.
The 2018 BMW i3 and BMW i3s will celebrate their world premiere at the International Motor Show (IAA) in Frankfurt in September 2017 with pricing being announced closer to market launch.
Electric Driving: A new era of mobility.
The BMW i3 leads the way to a new era of mobility. It is recognized worldwide as a symbol of technology, sustainability and intelligent connectivity in the urban traffic environment, which is why it has become the best-selling electric car worldwide in the premium compact segment. The recipe for success of the BMW i3 has been enhanced thanks to refreshing styling accents, cutting-edge equipment features and new digital services, but also to the addition of a new model variant – the first ever BMW i3s. Keeping with tradition, the 2018 BMW i3 models will also be available with a Range Extender. By offering premium-quality, all-electric driving experience, meaning zero emissions and performance, in combination with the latest available connected technology, both model variants represent the future of urban mobility.
The BMW i3 has been the top-selling premium electric car in its class since 2014 worldwide. It is not just the visionary electric vehicles and inspirational design that help to make BMW i so popular, but also its innovative mobility solutions and the revolutionary new form of premium character, with sustainability as a key defining element. The BMW i brand has established itself as a pioneer for forward-thinking mobility by offering such products while also adopting an all-embracing approach that takes into account the complete lifecycle, from raw material production, through the manufacture and operation of the vehicles to their later recycling.
Emission free mobility and performance.
The BMW eDrive technology enables drivers to enjoy emission-free mobility with instantaneous power delivery, efficient use of energy and an optimized range for everyday practicality that even extends beyond the demands of purely urban travel. The BMW i3 and the more powerful BMW i3s draw their energy from the lithium-ion high-voltage battery developed by the BMW Group with a cell capacity of 94-ampere hours (Ah).
BMW driving dynamics with instantaneous torque.
The agile handling characteristics of the BMW i3 have been optimized with the improved Dynamic Stability Control (DSC) system. This comprehensively revised, faster responding Traction Control system guarantees confident handling under all driving conditions. Traction in less than ideal driving conditions has also been noticeably improved. Dynamic Traction Control (DTC) mode now boosts agility at higher speeds and during sporty cornering, even allowing mild and safely controllable drifts when grip levels are reduced.
The synchronous electric motor powering the new BMW i3 generates a maximum output of 170 hp. Its peak torque of 184 lb-ft is available instantly from standstill, in typical electric motor fashion. This means that stepping on the accelerator pedal immediately unleashes a thrilling burst of speed. The motor smoothly delivers the kind of performance that drivers expect from a BMW via a single-speed automatic transmission, with continuous power delivery that builds up the car’s speed. The new BMW i3 accelerates from 0 – 60 mph in 7.2 seconds1 with an electronic top speed of 93 mph.
The first ever BMW i3s: a thoroughly dynamic performer.
The first of its kind and more powerful BMW i3s incorporates a number of design elements all of its own that highlight its particularly dynamic character. Both the front and rear aprons are notable for their model-specific, powerfully shaped contours. At the front, the bumper inlay and its U-shaped surroundings are in black finish. The front fascia’s side sections are bordered on their lower edge by accent strips in BMW i Blue or Frozen Grey that emphasize the width of the car, complementing the front fascia. The accent in the closed BMW kidney grille is also painted in high-gloss black to give the grille a more prominent appearance. The rear apron of the first-ever BMW i3s is likewise composed of individually styled contours, while the black surround frames an extra-wide, body-colored inlay. On the first-ever BMW i3s, the roofline accent also sports the same high-gloss black finish as the A-pillars.
Underneath all of the design elements, the first-ever BMW i3s features a sports suspension that includes a 10-millimeter drop in height. Visually broader high-gloss black wheel arch moldings’ emphasize an increase of 40 millimeters track width compared to the BMW i3 providing a stable stance and sportier looks. The BMW i3s comes standard with exclusive 20-inch light-alloy wheels in bicolor double-spoke design, which are ½-inch wider than the previously available. Customers can also specify these wheels in Jet Back finish as a no-cost option. Overall, the first ever BMW i3s is the most powerful BMW i3 to date with clearly reflected key design elements that highlight its sporty character.
New high-performance motor and SPORT mode for BMW i3s. (1 Preliminary figures.)
The first ever BMW i3s provides an even sportier interpretation of silent mobility with zero emissions and features a high output 184 hp1 electric motor that generates peak torque of 199 lb-ft1. Its updated drive system includes modified motor control and specific taper roller bearings, which have been utilized to optimize power delivery and the performance curve at higher rpm. At the limits of the motor speed range, the power and torque of the enhanced drive system represent an improvement of up to 40 percent over the BMW i3. The driving dynamics and enhanced e-Driving abilities are significant especially at higher engine speeds when higher performance and higher torque is more noticeable.
The first-ever BMW i3s features a sports suspension with specially developed springs, dampers and anti-roll bars. Drivers can now also select SPORT mode using the Driving Dynamics Control switch. This initiates more direct accelerator response and tighter steering characteristics to accentuate the car’s sporting edge. Just 6.8 seconds1 is enough to see the BMW i3s burst past 60 mph on its way to a top speed of 100 mph1.
A two-cylinder range extender gasoline engine is available as an option for all BMW i3 models. The engine drives a generator that produces power as required to feed electricity to the high-voltage battery, which becomes available whenever necessary. This extends the car’s overall range in everyday use by 87 miles1, increasing it from around 97 miles1 to a maximum of 180 miles (Preliminary figures.).
Design accents: A sporty yet elegant look.
The unmistakable, avant-garde exterior styling of BMW i3 has already picked up the iF Gold award for product design and the World Car Design of the Year award along with other accolades, and it has now been enhanced by a number of design touches that clearly convey the sporty and stirring driving experience on offer.
The trademark BMW i Black Belt, running from the trunk over the roof to the car’s rear end is now complemented by A-pillars and rooflines that also sport a black finish. In contrast to the BMW i Black belt, two new exterior paint colors Melbourne Red metallic and Imperial Blue metallic compliment the vehicle design. Besides these two new additions, customers can also choose from the non-metallic shades Capparis White and Fluid Black as well as Protonic Blue metallic and Mineral Grey metallic. A matte-chrome roofline accent on the BMW i3, as part of the black A-pillar and roof layer, add a touch of elegance. This design element also improves height perception, adding to the models stance as it widens towards the rear.
The restyling of the front and rear aprons places particular emphasis on the car’s width. The redesigned front contour highlights a wider stance with athletic characteristic. A chrome-design trim strip running across the full width of the rear and the positioning of the model and eDrive badges on the outer edges of the tailgate serves to reinforce this impression.
The new BMW i3 and the first-ever BMW i3s come equipped with Full-LED headlights as standard, which employ LED bulb units for low and high beams, as well as the daytime running lights. The new turn signal indicators also feature LED technology and are integrated into the front apron in the form of horizontal strips. This means that LEDs are now used for all lighting functions at the front of the vehicle too, as was already the case with the glass-covered rear light assemblies.
The new design elements highlight the enhanced character to emphasize a strong presence and sportiness. The BMW i3’s strong character is enhanced by the U-shaped feature line in matte black in the bumper. The horizontal LED indicators emphasize width even more. The rear shows off, the powerfully molded contours and the contrast in color between the black surround and the body-colored inlay.
Interior: great sense of roominess, sustainable materials.
Like the exterior design, the interior styling of the new BMW i3 and first ever BMW i3s is rooted in the LifeDrive vehicle architecture. The carbon fiber-reinforced plastic (CFRP) passenger cell has a wonderfully spacious feel about it and is dominated by a sense of lightness. The design principle of the two four-seater models means there is no need for either fixed B-pillars or a transmission tunnel. Doors that open in opposite directions allow the occupants to get in and out with the greatest of ease.
The Mega, Giga and Tera World equipment lines are available for the new BMW i3 and first ever BMW i3s as alternatives to the standard Deka version. The optional Giga World includes a new trim for the seat surfaces in Giga Brown Natural Leather & Carum Spice Grey Wool Cloth which combines natural leather tanned using an olive leaf extract with a wool-based textile material. The BMW i3 and BMW i3s apply the concept of sustainability throughout, as other materials used are recycled plastics, renewable raw materials, natural fibers and open-pored, unbleached eucalyptus wood. Over 80 percent of the surfaces visible to the passengers are made from recycled materials or renewable resources. The available seat belts in BMW i Blue for the first ever BMW i3s only, provide a splash of color in the interior. Typical BMW i Brand lettering are also visible on the front floor mats.
Technology and Driver Assistance Systems.
The driver assistance systems available for the new BMW i3 and first-ever BMW i3s ease the driver’s workload and provide support in various traffic situations, as well as helping with longitudinal and lateral vehicle control. The Technology and Driving Assistance Package offers Active Driving Assistant and Active Cruise Control with Stop & Go while Advanced Real-Time Traffic Information and ConnectedDrive Services are also contained within the upgraded Navigation System included in this package. When equipped with the Technology and Driving Assistance Package, Apple CarPlay can be enabled. Park Distance Control is a standalone option as well as the Parking Assistance. Once the system has been activated and a suitable parking space has been found, at the press of a button Parking Assistant takes control of acceleration, braking, gear selection and steering. Driving Assistance systems also contained within the Technology and Driving Assistance package include Daytime Pedestrian Protection, Frontal Collision Warning with City Collision Mitigation and Speed Limit Info.
The latest BMW iDrive 6 interface, ConnectedDrive with navigation features and On-Street Parking Information specially developed for electric mobility.
Both the new BMW i3 and first-ever BMW i3s come with the latest version of iDrive, which provides an intuitive interface for controlling numerous vehicle, infotainment, communications and navigation functions, specifically designed for BMW i. In vehicles equipped with the Navigation system Professional, the Control Display features a 10.25-inch screen with an increased resolution of 1,440 × 540 pixels. The main menu is presented in the form of live tiles containing dynamic content. The voice recognition system has also been optimized with cloud-based off-board processing of speech. With Natural Language Understanding available with the Navigation system Professional, spoken instructions can now be executed more quickly and naturally, i.e. when searching for an address or Point of Interest, or for searching music and phone numbers or dictating e-mails and SMS messages. Natural phrases such as “find coffee shops nearby” or “take me home” make for an effortless experience. When equipped with Apple CarPlay, additional smartphone apps can be seamlessly integrated within the vehicle’s operating system.
The enhanced BMW i ConnectedDrive offering ensures intelligent connectivity through services specially tailored to electric mobility. The On-Street Parking Information search service, now available for the first time in the BMW i3, can also be used alongside the Advanced Real Time Traffic Information (ARTTI) system with the optional Navigation system Professional. On-Street Parking Information helps drivers locate available parking spaces in many major US cities. It uses historical and real-time data to determine the likelihood of finding vacant parking spots in a given area and displays the information on Navigation Map. Specifically designed for BMW i, public charging stations and information about their availability can also be displayed on the navigation system’s map. When route guidance is activated, data about the route is also used to calculate the range shown in the instrument cluster as accurately as possible. Standard on the i3, the range map provides a visual representation of the current operating radius. With Navigation Professional, the dynamic range map draws a boundary representing the maximum range the vehicle could travel on its current charge status. It is also possible to display the different ranges achievable in each of the Driving Dynamic Control modes. BMW i-specific navigation features also include intermodal route guidance. This helps users to quickly and efficiently reach their destination by factoring in local public transport timetables and connections. Regular, automatic updates of the navigation data are now also provided “over the air” in the BMW i3, using a mobile network connection.
A package of new services were introduced in early fall under the BMW Connected+ umbrella which enable a highly personalized digital experience. All of the digital services related to BMW Connected and BMW Connected+ will be available in the BMW i3 and BMW i3s. These span intelligent route planning, including stops at charging stations or gasoline stations in the case of the range extender (Send my Routes to Car), sharing of the car’s current location via SMS and live link (Share Live Trip Status). Also part of the Connected portfolio features personalized display of relevant in-car information (BMW Onboard), seamless transfer of route instructions to the customer’s smartphone or smartwatch once the car is parked (Navigate Door-to-Door) and direct syncing of contacts and addresses to the navigation system (My Destinations).
BMW Digital Charging Service enables convenient and intelligent charging.
Planned for release in the first-half of 2018 is the BMW Digital Charging Service. BMW ConnectedDrive and the BMW ConnectedDrive Portal will turn charging into an easy to use digital experience. As a result, the BMW i3 and BMW i3s are integrated perfectly into the customer’s smart ecosystem. The service’s ease of use – from a smartphone via BMW Connected or from PCs and tablets via the BMW ConnectedDrive Portal – also facilitates fully transparent, sustainable use of renewable energy. With the introduction of its unique BMW Digital Charging Service, BMW becomes the world’s first carmaker to integrate electric mobility with its customers’ digital worlds.
360° ELECTRIC: new charging cable, BMW i Charging Station.
360° ELECTRIC is a range of products and services that help make electric mobility a convenient, everyday experience. The functionality of the standard charging cable supplied with the first ever BMW i3s has been optimized and includes a temperature sensor. Charging at home is extremely user-friendly thanks to the BMW i Charging Station which can supply 7.2 kW of power to charge the high-voltage battery. This allows enough energy for an electric range of around 90 miles to be transferred in three hours – about five times quicker than with the standard Level 1 120 V charging cable. Drivers with a registered ChargeNow card have unrestricted access to the world’s largest network of public charging stations.
BMW Original Accessory: BMW TurboCord™ EV Charger.
Now available as a BMW Original Accessory the BMW TurboCord™ Electric Vehicle Charger can be purchased at certified BMW Centers for $499 MSRP. This premium charging solution provides BMW i and BMW iPerformance drivers with the ultimate charging experience – flexible dual-voltage (120 V / 240 V) capability and nearly three-times faster charging – all in the smallest, lightest UL-listed portable charger available. The BMW TurboCord™ EV Charger components have been specifically engineered by BMW to meet BMW Group standards and requirements, featuring a convenient 20 ft charging cord, and provides two chargers in one. Level 1 charging is readily available when plugged into any 120 V outlet and it also allows customers to charge up-to at 3.6 kW, nearly three-times faster than the standard occasional use cable (OUC) when used with a 240 V outlet (NEMA 6-20). Also integrated are such state-of-the-art safety features as unit and plug temperature monitoring, automatic shut-off and a rugged, waterproof, submersible enclosure (NEMA 6P) that enables users to safely and reliably charge indoor and outdoor.
Sustainability meets personal mobility.
BMW i is shaping the future of sustainable personal mobility. Its integrated concept focuses on responsible use of resources and incorporates material selection and innovative mobility services alongside emission-free driving. The BMW i3 is just as serious about the fun of driving, turning even a trip around town into an electrifying experience. The inspirational design of the BMW i3 expresses a new style, while the instantaneous power from the drive system provides an inspiring showcase for the dawn of a new era in mobility.
This car’s architecture was designed from the ground up with electric mobility in mind. Combining the latest technological innovations with an evolutionary development of the car’s design and the expansion of the model range has provided additional impetus for BMW’s now familiar take on premium electric mobility. The character profiles of the new BMW i3 and first-ever BMW i3s are focused more than ever on driving experience, which gives them all the ingredients required to strengthen their leading position in e-mobility and the BMW i success story.
Your Mission Should You Decide To Accept Is To Challenge the Tesla Model S
Porsche has taken the first shot at Tesla with the introduction of the Mission E concept revealed at the Frankfurt Motor Show last night.
The concept boasts an 800 Volt electrical system with two permanent magnet synchronous motors - similar motors to the ones used in the 919 Hybrid LMP1 racecar. The powertrain produces around 600 horsepower and gives the Mission E performance figures of 0-60 MPH around 3.5 seconds and hitting 124 MPH in 12.5 seconds. Overall range is estimated at 310 Miles. Now this is more range than the comparable Tesla P85D which offers 305 Miles. But with the P90D just around the corner, Tesla says range will increase about six percent.
One of the big points of the Mission E is how fast it can recharge. Porsche says the concept can achieve an 80 percent charge in 15 minutes. This is thanks to 800 Volt electrical system in the vehicle. The Mission E can also charge on a 400V outlet or inductive charger.
In terms of looks, the Mission E looks to be a futuristic Panamera with elements of 918 strewn throughout. The concept features some nice touches as the charging port hidden in a movable panel in the front fender and a set of sucide doors with no B-Pillar.
Press Release is on Page 2
Porsche Mission E: 600 hp, 500 kilometer driving range, 15 minutes charging time
World premiere of the first battery-powered four-seat concept car from Porsche
Stuttgart. In presenting the Mission E at the IAA in Frankfurt, Porsche is introducing the first all-electrically powered four-seat sports car in the brand's history. The concept car combines the unmistakable emotional design of a Porsche with excellent performance and the forward-thinking practicality of the first 800-volt drive system. Key specification data of this fascinating sports car: four doors and four single seats, over 600 hp (440 kW) system power and over 500 km driving range. All-wheel drive and all-wheel steering, zero to 100 km/h acceleration in under 3.5 seconds and a charging time of around 15 minutes to reach an 80 per cent charge of electrical energy. Instruments are intuitively operated by eye-tracking and gesture control, some even via holograms – highly oriented toward the driver by automatically adjusting the displays to the driver's position.
Drive system: over 600 hp with technologies from endurance racing The drive system of the Mission E is entirely new, yet it is typical Porsche, i.e. proven in motor racing. Two permanent magnet synchronous motors (PMSM) – similar to those used in this year's Le Mans victor, the 919 hybrid – accelerate the sports car and recover braking energy. The best proof of a Porsche is 24 hours of top racing performance and a 1-2 finish. Together the two motors produce over 600 hp, and they propel the Mission E to a speed of 100 km/h in less than 3.5 seconds and to 200 km/h in under twelve seconds. In addition to their high efficiency, power density and uniform power development, they offer another advantage: unlike today's electric drive systems, they can develop their full power even after multiple accelerations at short intervals. The need-based all-wheel drive system with Porsche Torque Vectoring – which automatically distributes torque to the individual wheels – transfers the drive system's power to the road, and all-wheel steering gives precise, sporty steering in the desired direction. This makes the Mission E fit for the circuit race track; its lap time on the Nürburgring Nordschleife is under the eight-minute mark. Everyday practicality: convenient and quick charging, over 500 km driving range It is not just passionate sportiness that makes up a Porsche but also a high level of everyday practicality. Accordingly, the Mission E can travel over 500 km on one battery charge, and it can be charged with enough energy for around 400 km more driving range in about fifteen minutes. The reason: Porsche is a front-runner in introducing innovative 800-volt technology for the first time. Doubling the voltage – compared to today's electric vehicles that operate at 400 volts – offers multiple advantages: shorter charging times and lower weight, because lighter, smaller gage copper cables are sufficient for energy transport. A moveable body segment on the front left wing in front of the driver's door gives access to the charging port for the innovative “Porsche Turbo Charging” system. Via the 800-volt port, the battery can be charged to approximately 80 per cent of its capacity in around 15 minutes – a record time for electric vehicles. As an alternative, the technology platform can be connected to a conventional 400-volt charging station, or it can be replenished at home in the garage via convenient inductive charging by simply parking over a coil embedded in the floor of the garage from which the energy is transferred without cables to a coil on the car's underbody.
Low centre of gravity for superior driving dynamics Another feature that is typical of a Porsche sports car is a lightweight concept with optimal weight distribution and a low centre of gravity. The battery mounted in the car's underbody, which is based on the latest lithium-ion technology, runs the whole length between the front and rear axles. This distributes its weight to the two drive axles uniformly, resulting in exceptionally good balance. In addition, it makes the sports car's centre of gravity extremely low. Both of these factors significantly boost performance and a sports car feeling. The body as a whole is made up of a functional mix of aluminium, steel and carbon fibre reinforced polymer. The wheels are made of carbon: the Mission E has wide tyres mounted on 21-inch wheels in front and 22-inch wheels at the rear. Design: fascinating sports car with Porsche DNA Every square inch, every angle, every radius of the Mission E reflects one thing above all else: emotional sportiness in the best tradition of Porsche design. The starting point is the sculpture of a sport saloon with a low height of 130 cm with sports car attributes from Zuffenhausen that embodies visible innovations such as its integrated aerodynamics. Distinctive air inlets and outlets – on the front, sides and at the rear – typify the body's full flow-through design that enhances efficiency and performance. Integrated air guides improve airflow around the wheels, for instance, and air outlets on the sides reduce overpressure in the wheel wells, thereby reducing lift.
The much reduced sculpting of the front end shows a classic Porsche sweepback, and it relates the concept car to the 918 Spyder and Porsche race cars. A new type of matrix LED headlights in the brand's typical four-point light design captures the viewer's gaze. Integrated as an element hovering in the airflow of the air inlet, they lend a futuristic character to the front end. The four LED units are grouped around a flat sensor for assistance systems whose border serves as an indicator light. Distinctive front wings and an extremely low-cut bonnet reference 911 design. As in the 911 GT3 RS, a wide characteristic recess extends from the overlapping front luggage compartment lid up and over the roof. The line of the side windows is also similar to that of the 911, however, with one important difference: two counter-opening doors enable convenient entry – without a B-pillar. Another difference: instead of the classic door mirror, inconspicuous cameras are mounted on the sides that contribute to the car's exceptional aerodynamics.
The rear design underscores the typical sports car architecture. The lean cabin with its accelerated rear windscreen, which draws inward at the rear, creates space for the sculpted shape of the rear wings that only a Porsche can have. A three-dimensional “PORSCHE” badge illuminated from inside hovers beneath an arch of light that extends across the entire width in a black glass element.
Interior: light and open with four single seats The interior of the Mission E transfers all of the traditional Porsche design principles into the future: openness, purist design, clean architecture, driver orientation and everyday practicality. The all-electric drive concept made it possible to fully reinterpret the interior. The lack of a transmission tunnel, for instance, opens up space and gives a lighter and more airy atmosphere to the entire interior. Race bucket seats served as inspiration for the four single seats. Their lightweight design is weight-saving, and it gives occupants secure lateral support during dynamic driving. Between the front seats, the centre console – elegantly curved like a bridge with open space beneath it – extends up to the dashboard. Display and control concept: intuitive, fast and free of distractions A new world based on an innovative display and control concept opens up before the driver. It is intuitive, fast and free of distractions – created for the sports car of tomorrow. The filigree driver's display is curved, low-profile and free-standing. The instrument cluster shows five round instruments – they can be recognized as Porsche, but they are displayed virtually in OLED technology, i.e. by organic light-emitting diodes. The round instruments are organized according to the driver-relevant themes of Connected Car, Performance, Drive, Energy and Sport Chrono. The controls are just as innovative. An eye-tracking system detects, via camera, which instrument the driver is viewing. The driver can then activate the menu of the instrument in focus by pushing a button on the steering wheel and navigate in it – which also involves an interplay of eye-tracking and manual activation. But that is not all: the display follows the seat position and body attitude of the driver in what is known as a parallax effect. If the driver sits lower, higher or leans to one side, the 3D display of the round instruments reacts and moves with the driver. This eliminates situations in which the steering wheel blocks the driver's view of certain key information, for instance. All relevant information such as vehicle speed is always within the driver's line of sight.
The Mission E can even portray driving fun: a camera mounted in the rear-view mirror recognizes the driver's good mood and shows it as an emoticon in the round instrument. The fun factor can be saved together with individual information such as the route or speed, and it can be shared with friends via a social media link.
Holographic display with touch-free gesture control The entire dashboard is chock full of new ideas. Its division into two three-dimensionally structuring layers reinforces the impression of lightness and clarity. The upper layer integrates the driver's display, and between the levels there is a holographic display that extends far into the passenger's side. It shows individually selectable apps, which are stacked in virtual space and arranged by priority with a three-dimensional effect. The driver – or passenger – can use these apps to touch-free control primary functions such as media, navigation, climate control, contacts and vehicle. The desired symbol is activated by gestures that are detected by sensors. A grasping gesture means select, while pulling means control. Moreover, driver or passenger can use a touch display on the centre console to control secondary functions such as detailed information menus.
The concept vehicle can also be configured externally from a tablet via Porsche Car Connect. Using “Over the Air and Remote Services” the driver can essentially change the functional content of the vehicle overnight. A simple update via the integrated high-speed data module is all it takes to implement the travel guide or additional functions for the chassis, engine or infotainment system. The driver can use a smartphone or tablet to start updates conveniently from the Porsche Connect Store. Furthermore, Porsche Connect enables direct contact to a Porsche Centre for remote diagnostics or to schedule appointments. Another function of integrated Remote Services is the digital key, which can be sent via the Porsche Connect Portal. It not only lets the owner open the doors, but also other persons authorized by the owner such as friends or family. After successful authentication, the key can be used within a specific time frame and defined location.
The virtual exterior mirrors are literally eye-catching. The lower corners of the windscreen show the images of the outside cameras that are mounted in the front wings. The benefits: the driver gets a better view of images and the surroundings, and safety information can also be actively displayed there.
The Infiniti Q30 Joins the Growing Group of Entry-Level Luxury Cars
A new entrant is coming into the entry-level luxury class. At an event on the eve of the Frankfurt Motor Show, Infiniti revealed the 2017 Q30 hatchback.
The production model isn't much different from the concept at the shown at the 2013 Frankfurt Motor Show with a front end seen on a number of Infiniti sedans, and bold sculpting along the side. The interior is focused on the driver with a simple layout for the center stack and sport seats.
The Q30 comes from the partnership of Diamler and Nissan. That means the Q30 has some bits of Mercedes-Benz's compact luxury car - the A-Class. It begins with Mercedes' 2.0L turbo-four with 208 horsepower for the U.S. Other countries will get a selection of gas and diesel engines producing 108 to 168 horsepower. Front-wheel drive will come standard, while all-wheel drive will come as an option. It isn't known at this time whether or not the U.S. models will get this option. A six-speed manual and seven-speed dual-clutch automatic will be available.
Also coming from Mercedes is the front McPherson struts and rear multi-link suspension arrangement from A-Class. Infiniti has made some slight changes with their own settings for the shocks. A set of eighteen or nineteen-inch wheels will be available.
We'll have more information on the Q30 before it launches in the U.S. sometime in the second quarter of next year.
Press Release is on Page 2
Infiniti Q30: A new type of premium compact car
Q30 active compact is a vital part of Infiniti's global growth plans
Infiniti's first global entry in the compact segment attracts a new generation of premium buyers
Q30 features daring design that forges a unique path for a premium car
Confident dynamics deliver a holistic, intuitive driving experience
"Premium" and "Sport" versions allow for individual expression
World premiere at 2015 Frankfurt Motor Show on September 15, 2015
Hong Kong – Making its world premiere at the 2015 Frankfurt Motor Show (September 15), the Infiniti Q30 active compact is a new type of premium vehicle for a new type of consumer. Representing Infiniti's first global entry into the fast-growing premium compact segment, the Q30 will play an important role in helping the company realize its plans for global growth.
Designed for a new generation of buyers who are not willing to be defined by their choice of vehicle body type, the Q30 challenges convention with its bold character and daring shape. The car stays true to the signature design cues from the original 2013 concept and exemplifies Infiniti's design-led, customer-centric approach to product development. The unconventional stance and asymmetric interior contribute to an overall design that is certain to command attention.
The development teams behind the Q30 have taken a holistic approach to its engineering, presenting a car that offers exceptional ride and handling. It feels comfortable yet "ready to go anywhere" thanks to the versatile dimensions, confident dynamics and intuitive technologies.
In addition to the base model, two bespoke versions of the Q30 will be available: "Premium" and "Sport." Each will have its own unique personality, including design, dimensions and driving performance – offering premium compact buyers a choice that is specific to their personal needs and preferences.
"Q30 makes a daring visual statement through its sculpted, concept car-like exterior, unconventional stance and asymmetric cabin design. The car has been engineered to exacting standards to deliver a driving experience that is unmistakably Infiniti. Q30 will accelerate the company's strategy to become a leading global manufacturer of premium cars." Roland Krueger, President of Infiniti
Q30 is a vital part of Infiniti's plans for global growth
The launch of the Q30 active compact comes at a moment of significant opportunity for the Infiniti brand, and it will play a vital role in global growth and strengthening of its presence in key sales regions.
Infiniti sold a record 136,700 new vehicles worldwide during the first eight months of 2015, representing an increase of 14 percent compared to the same period in 2014. The brand also set records in China, Asia & Oceania, and EMEA (Europe, Middle East & Africa).
In August alone, Infiniti posted global sales of 16,900, an increase of 19 percent over the same month last year. This marked the best August in Infiniti's history, and the brand has now reached a 12-month streak of best individual months on record. Sales records were set in many key markets, such as Australia, Canada, China, Latin America, Mexico, South Africa and West Europe.
"These excellent results provide a strong foundation for future growth globally and in key regions, and the launch of Q30 means we're well positioned to carry forward this momentum." Roland Krueger, President of Infiniti
The Q30 gives Infiniti the best platform from which to achieve its goals in key markets globally. It will become the company's first ever vehicle built in Europe at newly upgraded production facilities in Sunderland, United Kingdom. Representing a £250 million investment, plant extensions totalling over 25,000m2 will provide Infiniti with the production facility to satisfy the demands of premium vehicle manufacturing. A successful recruitment program has recently been completed, filling over 300 new jobs to support Q30 production.
Q30 is the beginning of Infiniti's push to expand its product line-up
With the launch of the Q30 active compact, Infiniti has started to deliver on the promise to expand and refresh its product portfolio within new premium segments.
Staying true to the concept revealed at the 2013 Frankfurt Motor Show, the Q30 is an in-house development designed and engineered to meet exacting Infiniti standards.
"Q30 is integral to Infiniti's commitment to offering a broader range of premium products in new segments, and is part of an intense product launch period that will see us further enhance our offer to an increasing number of customers." Roland Krueger, President of Infiniti
Infiniti is adding new product at the right time, as data show that the premium compact segment is among the fastest expanding globally, and it is set to continue its growth trajectory as we approach the end of the decade.
Infiniti entering the compact segment for the first time
Representing the first vehicle of its kind for the company, Infiniti has dared to be bold and ambitious with the Q30 active compact. The car defies categorization with its rare shape and elevated stance. Its expressive design targets premium customers seeking urban individuality.
"From the very beginning of product development, it was clear that Q30 presented an outstanding opportunity for Infiniti. The company's inspiration was to create a vehicle that mirrored the existence of a new generation of premium buyers." Francois Bancon, Infiniti Vice President Product Strategy
Combining unique height and dimensions with coupe-like proportions, the Q30 conveys a "ready to go anywhere" attitude while maintaining an "at home in the city" versatility – perfect for those wanting to create their own unique experiences.
Generations X and Y are a new breed of premium car buyers. For these buyers, a car is an expression of "self" rather than "status," and they insist on setting their own standards through unique, category-defying products. For them, personalising a brand is a means to individual expression – a "made for me" approach that is at the core of new luxury.
To satisfy these demands, every decision that went into crafting the Q30 was made for the individual. For example, the alloy wheels allow for true personalization, with a laser-cutting process enabling the precise application of an accent colour of choice. The process is so precise that the bespoke colored lines can be as thin as 0.3mm, offering a subtle way of making the car your own.
Complementing the bespoke nature of Q30, perceptual quality levels meet the expectations and high standards of buyers in the premium compact segment. Superior fit and finish details, both visible and tactile, are available across all grades. For example, a satin chrome-plated trim, rather than plastic chrome, gives Q30 a "cool-to-the-touch" feel, even in hot temperatures, while consistent use of black lacquer trim across wheel arches and side sills highlights the Q30's elevated stance, contributing to the strong, unique road presence of the vehicle.
Q30 takes a design-led approach that forges a unique path
Staying true to the design cues from the original 2013 concept, the Q30 active compact exemplifies Infiniti's design-led approach to product development.
"Infiniti is an expression of design. We want our customers to feel the hand of the artist at work in the sculpted, muscular aesthetic of our cars. Q30 design is marked by turbulent character lines and sculptural shapes that look stretched over bone and muscle. The effect is a spontaneous feeling of harmonious design that can be appreciated at a glance." Alfonso Albaisa, Infiniti Executive Design Director
An important, differentiating characteristic of the Q30's design is its combination of elevated stance with an overall height that is comparable with models in the traditional compact segment (1,495mm for base and Premium and 1,475mm for Sport). The result is a highly distinctive, coupe-like silhouette, which is further emphasised by a shallow side glass area.
The Q30 takes Infiniti's signature design cues and evolves them into new dynamic shapes. The double-arch grille with 3D mesh, for example, has grown from the Q50, with a more fluid movement into the headlamps. The dramatic curves and turbulent lines flow up the signature double-wave bonnet, over the fenders and across the bodyline into the strong shoulder of the car. The signature C-pillar arcs forward in a dynamic crescent shape that emphasises motion, even when stationary. The contrast of the long, low-slung roofline, conjuring an image of a rakish shooting brake in silhouette, and elevated stance add to the visual impact.
Above the base Q30 model, two grades – "Premium" and "Sport" – permit opportunities for further individual expression through exterior design.
The Q30 Premium includes LED front fog lamps, body-colored and heated door mirrors, as well as chrome dual rectangular exhaust finishers. Eighteen-inch alloy wheels add to the Premium grade's striking appearance.
The face of the Q30 Sport is slightly different, thanks to a shapely bespoke bumper and gloss black front grille. Custom body-colored sidesills give the car a striking, in-motion look, while a sporty rear bumper is joined by dark chrome dual rectangular exhaust finishers. Nineteen-inch alloy wheels complete the confident look of the Sport model.
The Q30 Premium's elevated stance (170mm at the front axle) allows for a higher hip point (531mm), which aids ingress and egress. The A-pillar design is intentionally slim, contributing to enhanced visibility for a confident driving experience. Q30 Sport stands a little lower (155mm at front axle), providing for agile ride and handling.
The Q30's coupe-like design belies its interior space and functionality. Cabin room is highly competitive, notably the boot capacity of 13 cubic-feet (368 liters VDA), which ranks among the best in the premium compact segment.
"The Q30 is not the little brother or sister to siblings from larger segments. The car features a unique posture and shape that conveys the type of spontaneity and independent spirit that can only be matched by its owner." Alfonso Albaisa, Infiniti Executive Design Director
Infiniti's bold approach to design continues inside the Q30, where buyers will find an expressive interior that challenges traditional standards of symmetry in automotive design.
The beautifully styled, asymmetric surfaces feature wave shapes and dynamic lines that twist apart and flow away from the driver. This "dissymmetry" alters the conventional perception of occupant areas, creating a more pleasant environment in which to spend time.
"Infiniti wants to offer an environment in which the driver stays connected to the driving experience and where passengers feel relaxed in an open, aesthetically pleasing space. All occupants will appreciate a high level of artistry in the flowing, asymmetric lines." Alfonso Albaisa, Infiniti Executive Design Director
Custom-designed trims deliver a personalized, self-expressive interior design. "City Black" blends black upholstery with purple stitching, ideal for the all-night urbanite. "Cafe Teak" combines classy brown and black upholstery with black stitching, providing a modern twist on traditional concepts of premium. "Gallery White" endows Q30 with a fashionable, high-contrast appearance, featuring white leather with red accents. All three "designer" trims accentuate the Q30's stand-out interior and will add to the car's appeal for open-minded premium buyers looking for a new, creative approach to cabin design.
Infiniti interior designers have also selected the highest quality materials and processes available to create a modern-looking and luxurious cabin. For example, a super-soft, highly tactile material lines high-impact areas of the interior, such as door trims and the center armrest, while "Dinamica®," a new Italian suede-like material used increased increasingly in the high-fashion industry, has been applied to the roof-line and pillars.
Interior noise levels in Q30 add to the overall cabin comfort. Infiniti sound engineers used the official Articulation Index, a standard way of measuring the level of speech intelligibility provided in a space, to measure the quality of occupant conversation within the cabin. Q30 features a 10-percent improvement in audibility over the leading segment competition at a speed of 120kph.
Quietness in the cabin is aided by Active Noise Cancellation, which emits sound waves from the four door speakers to negate any instances of booming noise emanating from the 2.2-liter diesel engine (Europe market only). Sound-damping materials further reduce the impact of unwanted noise, either from the engine or exterior elements, while the closed sections of the high-rigidity body structure protect the Q30 from any negative noise and vibration generated by broken or inconsistent road surfaces.
Further interior comfort is guaranteed thanks to an advanced seat design. The seatback has been carefully engineered to match the curvature of the spine, providing consistent spinal support and minimising pressure on back muscles. A wider fitting shape on the seats distributes weight more evenly, while the softness of the seat cushion provides enhanced support and comfort. Internal testing by Infiniti engineers showed that the Q30 seat back section distributes load more effectively than its competitors in the segment.
For drivers wanting to add to the dynamic feel inside the Q30, sports seats with integrated headrests are available for the first time in an Infiniti, featuring eight-way adjustment and power lumbar support. The Q30 Sport features a leather-wrapped, flat-bottomed steering wheel, as well as aluminium pedals and footrests, adding to the in-control driving experience.
On certain grades, drivers can also stay in tune with the dynamic performance of the Q30 through Active Sound Enhancement, which monitors acceleration behaviour and gear ratio, smoothing out variations in engine tone to project a harmonious and exhilarating sound when accelerating.
Confident dynamics deliver a holistic driving experience
The Q30 active compact delivers a dynamic driving experience unique to Infiniti. Development started at the brand's technical center in Japan, before moving to Europe for final development and testing. In total, over 750 Infiniti engineers in Japan and Europe were involved in the car's development.
"Each mechanical aspect has been tuned in unison to make the Q30 perform as one, delivering a holistic driving experience that is both involving and intuitive. As a result, high performance is deployed consistently." Grahame Cornforth, Infiniti Chief Vehicle Engineer
The priority for Infiniti engineers was to strike an ideal balance between ride and handling. The car stays firm on the road thanks to specially tuned shock absorbers, with engineers considering over 50 variations on prototype vehicles before choosing the optimal setting, while the driving remains smooth throughout. Body stiffness has been enhanced to the benefit of the driver, eliminating negative sensations and audio cues, so the Q30 experience feels and sounds controlled.
Infiniti engineers have designed the suspension to be both forgiving and comfortable, without sacrificing agility. Bump shock rates and shock absorber rebound rates have been specially tuned, while MacPherson front struts offer tight packaging to best handle Q30's size and weight. A multilink system at the rear offers precise wheel control in all any conditions.
The Q30's steering has been tuned to deliver a consistent and connected feeling, thanks to an intuitive speed-sensitive system. A light and nimble feel makes the car easier to control in busy city traffic and urban environments, reducing stress and driver fatigue, while a gradual increase in resistance according to incremental changes in speed boosts driver confidence and control.
"The Q30 offers excellent steering, further enhancing the overall ride and handling feel, as well as a tuned suspension and body response that's uniquely Infiniti. Thanks to this set-up, the car offers a firm and in-control driving sensation, a perfect example being Q30's ability to confidently steer the right cornering angle and 'hold the line' precisely though the corner." Grahame Cornforth, Infiniti Chief Vehicle Engineer
Depending on the grade, Q30's suspension settings endow unique performance attributes. The base and Premium model are best suited to the varied, and often inconsistent road surfaces found in urban environments, the suspension set-up biased towards reducing vibration and harshness picked up from the road.
The Q30 Sport – with 15mm lower ground clearance than the base and Premium versions – gives a firmer ride, facilitating tighter body control and reduced roll without compromising comfort. The Sport grade has been engineered to be used comfortably on a daily basis while offering an intuitive, in-control driving experience.
A varied range of powertrain options is available globally, all tuned to provide exciting power delivery. In the European base model, there is a 1.6-liter engine, with either 120hp or 154hp. Also in Europe, diesel options include 1.5- and 2.2-liter engines, both four cylinder, with 107hp and 168hp power outputs, respectively.
In addition to these powertrain options, and the only engine offered in the U.S., Premium and Sport models add a 2.0-liter, four-cylinder gasoline engine producing 208hp.
Automatic gear shifts are smooth and seamless thanks to a seven-speed dual-clutch transmission. The dual clutch intelligently pre-selects gears so the next shift is always ready to go, while manual mode with paddle shifters lets the driver control gear changes when desired. Well-spaced ratios promise comfortable acceleration thanks to an even distribution of power, whether at a steady or fast pace, while quick and supple changes are ensured using either the fully automatic mode or the paddle gear selectors. Torque is almost uninterrupted between changes, reducing lurching while in motion and between shifts.
A six-speed manual transmission will also be made available in Europe only.
Power delivery from all engines is smooth while responsive as Infiniti's technical engineers have ensured the Q30's acceleration is prompt and reactive – providing bursts of power when most needed, giving confidence to the driver. An in-command sensation is generated by easily controlled acceleration, enabling the driver to feel and regulate the Q30's forward motion more intuitively.
The Q30 features a host of intuitive technologies that enhance the driving experience, while providing maximum safety to all occupants. These include: Automatic Park Assist with Around View Monitor (AVM) and Moving Object Detection (MOD), making the Q30 one of the easiest cars to park in the premium compact segment; Blind Spot Warning, providing greater security and confidence at speed by warning of other vehicles out of the driver's line of sight; Forward Collision Warning with Forward Emergency Braking, reducing the stress of driving in heavy traffic or in the city; Auto High Beam Assist, a highly intuitive technology that improves safety and confidence during night-time driving; and Intelligent Cruise Control, maintaining a safe distance from the car in front, resulting in a safe and relaxing drive.
A special metal plating method allows the radar waves of the Intelligent Cruise Control to pass through the Infiniti badge – a first for the brand.
Infiniti's trademark InTouch infotainment system, first introduced on the pioneering Q50, has been evolved and upgraded for the Q30, delivering an intuitive, tablet-like experience from the driver's seat via a delivering touch-screen HMI (human machine interface).
The Infiniti Q30 active compact will go on sale in selected markets later in 2015.
It has been a long two years since Jaguar revealed the C-X17 concept crossover at Frankfurt Motor Show. Since then, Jaguar has been teasing us with F-Pace mules wrapped in some interesting camouflage. But on the eve of the Frankfurt Motor Show, the British automaker has finally pulled the covers off the production model.
From the transition of concept to the production model, the F-Pace looks largely the same aside from minor changes to the trim. The body is comprised of aluminum, high-strength steel, magnesium, and composites. This allows the F-Pace to have the same torsional stiffness numbers as the new XF. The interior features seating for five people and dashboard similar to the one used in the new XE. There will be two versions of Jaguar's InControl infotainment system; an 8-inch with optional SD navigation and a 10.2-inch version with an 825-watt Meridian 17-speaker stereo.
At the launch of the F-Pace next spring, there will be two versions of the supercharged 3.0L V6. The base version will produce 340 horsepower and 332 pound-feet of torque, and a more potent version will make 380 horsepower and 332 pound-feet of torque. Following sometime after is a 2.0L Ingenium diesel four-cylinder with 180 horsepower and 318 pound-feet of torque. All engines will come with an eight-speed automatic and a torque vectoring all-wheel drive system.
Jaguar has also pulled some tricks from its sister brand, Land Rover for the F-Pace. The model offers 8.4 inches of ground clearance and wade through 20.7 inches of water. There are also a number of off-road systems such as Adaptive Surface Response, All Surface Progress Control, and Low Traction Launch. We're wondering how many F-Pace owners will actually take their car off the beaten path.
Pricing for the Jaguar F-Pace for the U.S. breaks down like this, 2.0 Ingenium diesel: $41,985 Supercharged 3.0 V6 (340 HP): $43,385 Supercharged 3.0 V6 (380 HP): $57,765
Prices include a $995 destination charge.
Press Release is on Page 2
The All-New 2017 Jaguar F-PACE
F-TYPE-inspired form that delivers on the promise of the breakthrough Jaguar C-X17 concept
Spacious cabin and large 23-cu.ft. luggage compartment
Strong and stiff Lightweight Aluminum Architecture delivers agility, refinement and efficiency
Optional Jaguar InControl® Touch Pro™ infotainment system featuring a 10.2-inch capacitive touch-screen, a virtual 12.3-inch HD instrument cluster with full-screen navigation display, supplemented by laser head-up display
Available InControl Wi-Fi™ capable of hosting up to eight devices
World debut of Activity Key: an optional waterproof, wearable vehicle access technology, allowing the keys to be securely locked inside the vehicle while engaging in outdoor activity
Double-wishbone and Integral Link suspension for exceptional handling and ride comfort
F-TYPE-derived chassis technologies including Torque Vectoring, Adaptive Dynamics and Configurable Dynamics offer a rewarding, tuneable driving experience
Optimized aerodynamics deliver low drag and high-speed stability
Supercharged 380hp V6 gasoline engine delivers 0-60mph performance in 5.1 seconds
Intelligent Driveline Dynamics enables all-wheel drivability and rear-wheel drive character
All-wheel drive delivers reassuring levels of grip in a variety of conditions, and can be further enhanced with traction technologies including available Adaptive Surface Response
All-Surface Progress Control designed to enable smooth drive-away on low-traction surfaces such as grass, snow and mud
Pricing starts from $42,390 for V6 gas engines and $40,990 for 4-cyl diesel 6 engines including Jaguar EliteCare, a best-in-class ownership package4
On sale beginning Spring 2016
(MAHWAH, N.J.) - September 14, 2015 - The all-new 2017 Jaguar F-PACE is a medium luxury SUV designed and engineered to offer the agility, responsiveness and refinement that Jaguar cars are renowned for, together with the exceptional dynamics and everyday versatility of an SUV.
DESIGN Designed by the same team as the C-X17 concept vehicle, the F-PACE remains true to the aesthetic of the award-winning concept. Thanks to the flexibility of the Jaguar Lightweight Aluminum Architecture, designers could work hand in hand with the engineers to determine key dimensions such as the wheelbase and track, delivering the proportions and elegant lines that distinguish it instantly as a Jaguar vehicle.
"We designed the all-new F-PACE to be first and foremost a Jaguar. That's why it has exciting proportions, a dynamic stance, pure surfaces and a beautiful sensuality about it. Its progressive, purposeful appearance has clearly been influenced by the F-TYPE. Every Jaguar car should draw your eye from 200 meters away and I believe the presence of the all-new F-PACE on the road is second to none in this class. The Lightweight Aluminum Architecture gave us the design freedom to create a car with latent poise - a svelte car with attitude," said Ian Callum, Director of Design, Jaguar. "It looks assertive yet not aggressive. But it's also versatile and equipped with real-world answers to everyday questions. The all-new F-PACE is an all-weather Jaguar sports car, life-proofed for five people and their belongings."
The influence of the F-TYPE is instantly apparent at the rear of the F-PACE, from the design of the LED tail-lights to its muscular rear haunches. The rakish angle of the rear window belies the load space behind it. Jaguar design cues extend to the silhouette of the F-PACE, with a sleek roofline as well as short front and rear overhangs that reflect the vehicle's agile response. The vehicle's stance is further emphasized with the fitment of optional 22-inch diameter wheels.
Outside, the taut surfaces and clean lines of the bodysides are formed from a single sheet of aluminum - building upon the brand's decades-long expertise in designing, engineering and manufacturing vehicles using this lightweight material. The bold, upright front grille is assertive, but also contributes to the aerodynamic efficiency of the performance SUV. The Jaguar signature power bulge extends the full length of the aluminum hood emphasizing the vehicle's performance capabilities. Altogether, the exterior design cues from the bodyside, hood, front and rear help underscore the vehicle's athleticism as a performance SUV.
The sleek headlights, available with adaptive full-LED technology2, feature daytime running lights with the signature Jaguar 'J' Blade design. The slender LED fog lights available on R-Sport trim levels were developed in-house and use TV screen optics and light tubes to deliver compact packaging, as well as an exceptionally smooth, homogeneous light source.
The F-PACE is a five seater and features a spacious, luxurious interior which utilizes premium materials, craftsmanship and meticulous attention to detail that gives every Jaguar vehicle its unique sense of occasion.
The 'Sports Command' driving position in the F-PACE provides authoritative, confidence-inspiring outward visibility2, while retaining the Jaguar-specific sports car feel; the dramatic curve of the front door top is incorporated into the dash fascia enhancing the cockpit-like feel.
The vehicle's available leather sports seats are shaped to provide exceptional comfort and support; they are available with 14 different adjustments plus heating and cooling functions. A range of contemporary trim options are also available, including authentic metal finishes such as Meshed Aluminum and beautiful crafted veneers such as Satin Grey Ash.
The instrument panel, similar to those found in the new XE and XF, features two large, deeply-hooded analogue dials and a central TFT display, or an optional 12.3-inch virtual instrument cluster featuring the choice of four visual themes and full-screen navigation9. Ambient lighting, especially with the 10-color option, further enhances the sense of luxury.
The long, 113-inch (2,874mm) wheelbase makes ingress and egress to and from the rear seats easy, while the seat base itself was designed to allow passengers to sit further outboard; resulting in more space for three occupants to fit in the second row. The positioning of the seats, together with the height of the beltline, means that even small children enjoy a good view out. The available four-zone climate control system with B-pillar vents and the electric recline function of the rear seats adds to the passenger experience.
Driver and front seat passengers will also enjoy a center console that offers a 12V socket and up to three USB ports. The rear console can feature up to two more 12V sockets or two additional USB ports.
The focus on package efficiency also means that the F-PACE has a loadspace volume of 23-cu.ft. (650-liters) with a width of 49.4-inches (1,255mm). The 40:20:40 split rear seats allow through-loading and when folded flat, the luggage compartment offers up to 61.4-cu.ft. (1,740-liters) of space. Packaging is further enhanced by the low loading height and flat floor. The floor itself is reversible: one side is carpeted, the other rubberized - making it ideal for sports equipment or pets. The lightweight composite tailgate benefits from power opening and closing functions, and optional gesture control for hands-free operation.
ARCHITECTURE AND BODY STRUCTURE The F-PACE is the latest Jaguar model, alongside the XE and XF, to benefit from the brand's expertise in designing and manufacturing aluminum monocoques. In fact, the F-PACE features the largest amount of the Jaguar-developed RC5754 aluminum alloy yet; one third of the vehicle features this lightweight material which comprises up to 75 percent recycled material.
In conjunction with the brand's Lightweight Aluminum Architecture, new features such as the composite tailgate, magnesium cross-car beam and front-end carrier contribute to its outstanding driving dynamics.
Advanced high strength steels in areas such as the rear floor, are joined using more than 2,600 self-piercing rivets, 238.8-ft (72.8 m) of structural adhesive and more than 560 spot-welds. The resulting torsional stiffness matches that of the all-new XF and, together with the advanced suspension systems, are key to the exceptional blend of ride, handling and refinement of the performance SUV.
The high-pressure diecast aluminum front suspension turrets, have been engineered to accommodate additional ground clearance and suspension travel of the vehicle. The front crossmembers are large; making them stiff to support the vehicle's elevated, Sports Command driving position. The subframes and subframe mounting points have been engineered to contribute to greater overall stiffness without the weight and packaging penalties that come by simply adding body reinforcements. In fact, wherever possible, every bracket in the body has been optimized so that it contributes to body stiffness, as well as performing its primary function.
CHASSIS The F-PACE has been engineered to deliver the same outstanding driving experience which sets all Jaguar vehicles apart from the competition. Using the long wheelbase of the Lightweight Aluminum Architecture helped keep the center of mass between the axles, while the chassis high stiffness benefits not only ride, but responsiveness.
"We develop every Jaguar vehicle to offer an unrivalled combination of agility and responsiveness with exceptional ride and refinement - and the all-new F-PACE is no exception," said, Mike Cross, Chief Engineer of Vehicle Integrity, Jaguar. "Applying all of the learning from F-TYPE, the steering reacts immediately, giving a truly connected feel. The double wishbone and Integral Link suspension offers the ideal balance of precise handling and body control, making the all-new F-PACE as rewarding to drive as it is comfortable to be driven in."
Double-wishbone front and Integral Link rear suspension, as well as a sophisticated Electric Power Assisted Steering (EPAS) system2, deliver exceptional capability on varying road surfaces. Extremely stiff in camber, the double-wishbone suspension allows the front tires to develop lateral force more quickly resulting in sharper turn-in and quicker steering response from the drivers input. The suspension is also tuned to allow the tire to maintain its contact patch throughout the full range of suspension travel, enabling the tires to generate more grip; contributing to enhanced steering feel and control.
Aluminum is used almost exclusively to make the suspension as light as possible, most notably the front knuckles. The intricate, ribbed design is achieved by forging the component from cast blanks; enabling maximum stiffness for minimum weight. Among the other enhancements are bonded bushings for the tubular anti-roll bar - as well as better NVH properties, the bushing design prevents dirt ingress, improving reliability.
The result of years of advanced research and development, Integral Link is the most sophisticated and capable rear suspension system ever put into a Jaguar vehicle. Separating lateral and longitudinal stiffness, the Integral Link allows the suspension to provide the best possible comfort without compromising dynamics.
The bushings which manage longitudinal loads can be made much softer than would otherwise be possible with conventional multilink suspensions, enabling excellent energy absorption and therefore a smoother, quieter ride. At the same time, lateral stiffness can be far higher, making the vehicle more responsive. Caster stiffness has been increased over other Jaguar models, which is felt by the driver as improved stability when braking.
The upper links are aluminum forgings, while the lower arm is hollow-cast aluminum - the optimum lightweight solution for this complex part. The springs and dampers are mounted separately, allowing each to be ideally positioned for the forces acting on the suspension and contributing even more to the dynamics and refinement of the F-PACE. This design is also highly space-efficient, minimizing intrusion into the luggage compartment.
Every Jaguar vehicle is designed to provide a responsive, connected steering feel. The all-new F-PACE is no exception, as this target drove the development of every single component between the steering wheel and the tire contact patch in order to achieve the precision, response and linearity which define Jaguar steering DNA.
Among the measures taken to achieve this include adding a fifth mounting point for the steering rack, and increasing the rotational stiffness of the subframe-to-body connections. High lateral stiffness in the rear axle also helps with initial turn-in because lateral forces at the tire contact patches build very quickly. Aerodynamics have been developed to give a front:rear lift balance closer to that of a sedan than an SUV, contributing to improved feel and stability during high-speed cruising.
The Electric Power Assisted Steering (EPAS) system2 in the F-PACE benefits from the addition of closed-loop control. Specially-developed algorithms calculate the forces coming back from the road and use this information to further refine the level of assistance, making the steering even more intuitive.
The EPAS system also features a variable steering ratio - as standard. This is achieved using variable pitch gears on the rack bar and fixed pitch gears on the pinion. By changing the contact point with the rack's gear teeth from the valleys on-center to the peaks at full lock, the more the driver turns the wheel, the more responsive the steering becomes2.
Meticulously engineered and exhaustively tested at locations around the world, each available wheel and tire combination offers an excellent balance of grip, low rolling resistance, comfort and durability. F-PACE offers a variety of different wheel and tire options; from 18-inch wheels designed specifically to reduce aerodynamic drag to 22-inch wheels which complement the performance and design of the vehicle.
The range of 22-inch wheels was developed for the F-PACE by the Jaguar Land Rover Special Vehicle Operations division. Produced from forged aluminum to make them lighter and stiffer, they not only help to deliver the concept-car look of the C-X17 but also contribute to the high levels of on-road dynamics and traction of the F-PACE.
Another technology first developed for F-TYPE and now applied to the F-PACE is Torque Vectoring by Braking. Designed to make the vehicle even more agile, the system can apply finely-metered braking to the inner wheels to mitigate understeer during corner entry, helping the driver to keep the vehicle on the ideal line through a turn2. The system works predominantly on the inside rear wheel to avoid any corruption of steering feel, and as a result, system intervention is virtually transparent to the driver.
All models feature monotube dampers as standard. Not only do they contribute to a reduction in unsprung mass but they are also more responsive than conventional twin-tube dampers, and therefore offer greater ride control.
The available Adaptive Dynamics takes this to the next level. By monitoring body movement 100 times a second and wheel movement 500 times a second, the system is designed to provide continuously variable damping to suit the conditions2, delivering a comfortable ride at lower speeds and even better handling at higher speeds3. Linked to Adaptive Dynamics, Configurable Dynamics, first developed for the F-TYPE, enables the driver to tailor the vehicle's character by individually selecting dynamic or normal modes for the throttle mapping, transmission shift strategy, steering feel and adaptive damper setting, all using the central touchscreen.
For models equipped with the Jaguar InControl® Touch Pro™ infotainment system1, drivers also gain the Dynamic-i feature, which displays a stopwatch, g-meter and a map of accelerator pedal response.
POWERTRAIN At launch, U.S. buyers will have their choice of a 3.0l 340hp or 380hp supercharged gasoline V6 mated to an 8-speed transmission with power being routed to all four wheels via a torque-on-demand all-wheel drive system. Later in 2016, a 180hp four cylinder Ingenium diesel engine will also be added to the model lineup.
Supercharged V6 gasoline engines The 340hp and 380hp variants of the supercharged gasoline V6 engine are shared with the F-TYPE sports car. These all-aluminum engines are characterized by their immediate throttle response, linear power delivery and unique intake and exhaust sound.
The 90-degree cylinder bank angle enables the roots-type supercharger to be neatly packaged within the vee. Together with direct injection and variable intake and exhaust valve timing, the supercharger helps the engine generate a high torque output throughout the rev range, delivering strong acceleration at all times.
Both variants are matched to eight-speed automatic transmissions and all-wheel drive. The 380hp engine is exclusive to the F-PACE S models, and can launch the performance SUV from 0-60mph in only 5.1 seconds, on to an electronically-limited top speed of 155mph3.
Ingenium diesel6: Low fuel consumption, high torque Available later in 2016, the clean, responsive, Ingenium diesel uses state-of-the-art technologies including selective catalytic reduction (SCR) and low-pressure exhaust gas recirculation (EGR) to cut NOx and CO2 emissions.
Designed and manufactured in-house, this state-of-the-art, all-aluminum 2.0-liter engine produces 180hp and 317 lb.ft. of torque; delivering strong acceleration whenever the driver demands it3. It's highly efficient too, achieving excellent fuel economy and low CO2 emissions.
Ingenium is one of the first diesel engines to feature variable valve timing: a phaser to the exhaust camshaft enables the after treatment system to reach operating temperature as quickly as possible, reducing emissions. The engine warms up very quickly from cold thanks to a split-cooling system featuring a variable flow coolant pump and a mapped thermostat.
The 1,800bar common rail system and highly efficient variable geometry turbocharger enable clean, quiet, efficient combustion. Using cooled low-pressure EGR in addition to high-pressure EGR reduces pumping losses and therefore improves efficiency still further. Just as importantly, it reduces peak combustion temperatures and reduces the formation of NOx.
ZF® Transmissions The transmission in the F-PACE was developed with ZF® to deliver exceptional shift quality and efficiency. All six-cylinder engines are paired with the same 8HP70 transmission also found in the Jaguar XE, XF, XJ and F-TYPE models.
While the automatic transmission models have been developed to select the right gear at the right time depending on the mode chosen in the JaguarDrive Control™ system and according to driving style, enthusiasts will make the most of manual shift control using the steering wheel-mounted paddles. S models feature standard satin chrome-finished paddles.
ALL-WHEEL DRIVE Like the F-TYPE AWD, the F-PACE features a torque-on-demand AWD system2. Under normal driving conditions, all of the engine torque is sent to the rear axle, maintaining a rear-wheel drive character, while minimizing parasitic losses in the drivetrain. Whenever greater traction is needed, Jaguar Intelligent Driveline Dynamics (IDD)2 is designed to ensure that precisely the right amount of torque is transferred to the front axle. This process takes no more than 165 milliseconds and is virtually transparent to the driver.
These technologies ensure that the F-PACE delivers the connected steering feel and rear-wheel drive character inherent to Jaguar dynamics DNA, together with handling and performance which fully exploits the benefits of extra traction when required. This could not be realized with a conventional, full-time AWD system.
At the heart of the system is a compact transfer case featuring a multi-plate wet clutch and chain drive to the front axle. The all-wheel drive system is incredibly quick; making the transition from 100 percent rear-bias to a 50:50 torque split in just 165 milliseconds. If there is already a proportion of torque being sent to the front axle, additional torque transfer can take as little as 100 milliseconds.
Torque distribution is controlled by the IDD module, which is integrated into the transfer case. Taking data from the vehicle's yaw rate, lateral acceleration and steering wheel angle sensors, IDD continuously estimates not only the friction between the tires and the road surface, but also how much of the available grip is being exploited at each contact patch.
This intelligence, coupled to the extremely fast-acting transfer case, enables IDD to employ both pre-emptive and reactive control strategies, maximizing dynamics and traction. If IDD predicts that the rear axle is approaching the limit of available traction, torque will be transferred to the front axle. Torque can also be fed forwards to help mitigate oversteer by providing yaw damping. IDD is also networked to Jaguar Drive Control and the Dynamic Stability Control (DSC) system so that torque distribution can be even further optimized.
Adaptive Surface Response The AWD system in the F-PACE is enhanced further by the Jaguar Adaptive Surface Response (AdSR) technology. AdSR automatically adapts the maps of the throttle, transmission and DSC system according to the type of surfaceto maximize traction in a variety of conditions2.
Replacing Winter mode in the JaguarDrive Control system, AdSR operates throughout the vehicle's entire speed range and is designed to enable finer optimization of the vehicle's systems to make the most of the available traction, helping the driver to make smooth progress on challenging surfaces2.
AdSR debuted in the new XF and is further enhanced in the F-PACE, featuring three modes, one for low-traction surfaces such as snow and ice, one for medium-traction surfaces such as wet tarmac or gravel and a third mode for high-drag conditions such as deep snow and deep gravel to further exploit the vehicle's inherent ability. The system automatically switches modes to suit the conditions, leaving the driver free to concentrate on driving2.
So whereas on ice, for example, a very progressive throttle map will be selected, a much more aggressive map is used for deep snow because the engine has to build up torque very quickly to help the vehicle to maintain momentum.If, for example, the road surface changes from a thin layer of snow to a gritted section and then to a section covered with a thick layer of snow, AdSR will select different modes for each surface2. The transition takes place quickly - around four seconds - and seamlessly.
Inherent ability Designed to be as light and rigid as possible, the monocoque structure also delivers the short overhangs which are not only essential to the vehicle' outstanding proportions, but also to the maximum approach and departure angles of 25.5-deg and 25.7-deg respectively.
The ground clearance of 8.4-inches (213mm) is another advantage and one made all the more effective by the smooth underfloor which reduces aerodynamic drag. Similarly, when the architecture was developed, ECUs and other electronics modules were packaged as high up as possible to aid the remarkable 20.7-inch (525mm) wading depth of the F-PACE2.
AWD Testing The F-PACE has been developed to offer exceptional driving dynamics but its performance on tarmac is just one of its strengths. To ensure that it also delivers in adverse road and weather conditions, the vehicle has been subjected a demanding test program, in locations including the searing heat of Dubai and the freezing cold of Northern Sweden.
More than a quarter of a million test miles were accumulated in these two regions alone, where ambient temperatures can fall as low as -40°F (-40°C) and reach as high as 122°F (50°C). Going to such measures ensures that everything from tires to climate control systems to the infotainment touch-screens function perfectly in extreme conditions.
Among the features at the Jaguar Land Rover winter proving ground in Arjeplog, Sweden are 37-miles (60km) of purpose-designed handling tracks, loops, inclines and split-friction straights. Testing in Dubai included graveled mountain passes and dry river beds known as wadis - the F-PACE is the first Jaguar to be tested in these particularly challenging environments.
This is also the first time that a Jaguar has been evaluated in the mud and ruts of the legendary Eastnor test facility in the UK; until now, only Land Rover vehicles have been developed here. It's fitting too that the F-PACE was not assessed using existing sedan car test requirements; instead, tests were derived from the uniquely demanding standards set by the Land Rover brand.
This process meant that the engineering team could perfect the calibration of technologies such as IDD and AdSR in the most difficult and demanding conditions. The result of this exhaustive development is a luxury SUV which is designed to be capable on varying road and weather conditions including ice, deep snow, dirt roads and wet grass2.
ADVANCED DRIVER ASSISTANCE SYSTEMS The F-PACE offers all of the technologies needed to make journeys more convenient, from traction systems to get drivers moving on low friction surfaces, to an emergency braking system.
All Surface Progress Control (ASPC) Leveraging knowledge built up over decades of Land Rover experience in off-road technologies, ASPC delivers a step-change in capability by controlling the throttle and brakes, allowing the driver to concentrate more on the steering2. Functioning like a low-speed cruise control, ASPC can operate between 2.2mph (3.6km/h) and 19mph (30km/h). After activating the system by pressing a button on the center console, the driver uses the cruise control switches on the steering wheel to set the maximum speed. After that, the system does the work. As well as finely controlling the throttle, ASPC uses the brakes in opposition to the throttle so that from a standstill, only very low engine torque is applied to the driven wheels. The result is smooth, controlled progress with little or no wheel spin.
Low Traction Launch While ASPC makes the most of the vehicle's traction capability by taking control of the throttle, some drivers want to achieve similar results while operating the throttle for themselves. The Low Traction Launch function has been designed to do this when the driver selects Low Traction Launch using the touchscreen. Once activated, it changes the throttle map to one which results in a very progressive torque response from the engine, enabling the driver to pull away smoothly2. Like ASPC, Low Traction Launch is standard on all engines.
Stereo Camera Technologies The F-PACE features a forward-facing stereo camera at the heart of many of its advanced driver assistance systems. Providing a highly accurate 3D view of the road ahead, the stereo camera is ideal for Autonomous Emergency Braking (AEB) systems2. The F-PACE is the first Jaguar to offer an AEB system with a pedestrian detection function. If the system's controller determines that a collision with a vehicle or a pedestrian is imminent, it is designed to initiate full braking automatically2.
The stereo camera also provides the intelligence for the Lane Departure Warning (LDW) and Lane Keep Assist (LKA) systems2. By monitoring the vehicle's position relative to lane markings either side, LDW can help to prevent drivers from drifting out of lane by triggering a visual warning in the instrument panel and a haptic warning through the steering wheel rim. LKA can guide the driver back towards the center of the lane by applying a small amount of counter-steering through the electric power-assisted steering system. The torque applied to the steering wheel can be easily over-ridden by the driver.
Failure to stay in lane is often due to a lack of concentration but driver fatigue can also be a factor. Such tiredness may be characterized by periods of little or no steering activity followed by sudden or excessive inputs. The Driver Condition Monitoring system is designed to recognize these patterns, and, by also checking the usage of the brake and accelerator pedals, the direction indicators and various buttons on the instrument panel, will show a multi-stage warning in the instrument cluster and give audible warnings to prompt the driver to take a break2.
The Traffic Sign Recognition (TSR) system available on the F-PACE uses the stereo camera to keep the driver informed of the speed limit - including temporary limits which apply in road construction sites, for example, variable limits on highways, or reduced limits when towing2. The limit is displayed in the instrument cluster and if fitted to the vehicle, in the head-up display, and camera data is always cross-referenced against GPS data for maximum accuracy. If the driver selects the over-speed warning function, the ring around the sign graphic flashes whenever the limit is exceeded, giving an unobtrusive prompt to slow down.
Further support for the driver comes from the Intelligent Speed Limiter (ISL). This system can use TSR data to adjust the set point and can automatically increase or decrease the vehicle's maximum speed while the accelerator pedal is pressed. If the TSR system recognizes a higher speed limit ahead, the ISL system is designed to notify the driver and the vehicle can accelerate smoothly up to the new limit. If the speed limit is lower, the vehicle can be slowed down accordingly2.
Laser head-up display The laser head-up display (HUD) available on the F-PACE can put information such as vehicle speed, turn-by-turn navigation instructions and speed limits right in the driver's eye line, minimizing the amount of time spent glancing down at the instrument cluster2. The color images are exceptionally sharp and are adjustable both in height and in brightness; the HUD can also be switched off if desired.
Laser technology offers several advantages over conventional TFT systems including excellent color saturation and higher contrast, so they remain clear even in bright sunlight.
Adaptive Cruise Control with Queue Assist As well as reducing driver workload when cruising on the highway, the Adaptive Cruise Control system (ACC), when equipped on the F-PACE, can also help to relieve the monotony of driving in heavy traffic, thanks to the queue-assist function. The long-range radar will maintain a safe distance from the vehicle in front, all the way down to a standstill2. Press the accelerator again, and the F-PACE will pull away again and track the vehicle in front, at a distance, all the way up to the chosen speed setting.
Blind Spot Monitor and Reverse Traffic Detection By monitoring the area behind the vehicle, optional radar can assist the driver in other scenarios too. Medium-range sensors warn the driver of other vehicles approaching fast from behind. As they approach the blind spot, a flashing icon appears in the side mirror to alert the driver of the potential danger. As the vehicle enters the blind spot, the icon becomes solid2.
The same medium-radar sensors can help the driver at lower speeds too. When reversing out of parking spaces, other vehicles approaching from either side - which may not be visible to the driver - are detected by the radar. If they present a potential hazard, the driver is given audible and visual warnings.
Park Assist To assist the driver with parking in small spaces, the F-PACE is available with semi-automated park assist functions for parallel and perpendicular parking maneuvers. The vehicle's ultrasonic sensors first measure the space, and, if the system decides that it's suitable, will enable the vehicle to steer itself in - the driver just has to control the accelerator and the brakes2. The system can also steer the vehicle out of parallel spaces.
INFOTAINMENT AND CONNECTIVITY The F-PACE is equipped with the Jaguar InControl® Touch™ infotainment system as standard1. Featuring an 8-inch capacitive touchscreen, intuitive user interface and crisp clear graphics, it supports smartphone and tablet gestures such as 'swipe' to move from one page to another, and 'drag' to scroll through maps.
With navigation fitted to the vehicle, entering addresses is quicker and easier than with previous systems and routes are calculated faster thanks to SD card storage of navigation data. Maps are rendered in 2D and 3D graphics, making directions simple and intuitive to follow.
Turn-by-turn instructions can also be shown in the optional head-up display, leaving the driver free to concentrate on what matters most - the road ahead2.
Also available as an option, is the Jaguar InControl® Touch Pro infotainment system1. Designed and developed in-house around a quad-core processor, a high-speed 60GB solid-state drive (SSD) and an ultra-fast Ethernet network, InControl Touch Pro™ delivers truly world-class performance and an outstanding user experience.
The Jaguar InControl® Touch Pro infotainment system features a 10.2-inch touch-screen. Like a tablet, there are no buttons; all controls are integrated into the bottom section of the touch-screen, making interaction smooth and seamless. The home screen can be customized and widgets can be added - users can even add additional home screens if they wish1.
InControl Touch Pro has been designed to make every journey easier and more enjoyable. Navigation data stored on the high-speed SSD can be accessed in a fraction of the time required with conventional hard drive technology, making the graphics incredibly responsive. Users can zoom in and out of maps using 'pinch' and 'pan' gestures1.
Even when there's no GPS signal the system can still help drivers to stay on track with dead-reckoning functionality which analyzes data from the vehicle's sensors to accurately predict the vehicle's location.
Using the data connection to access location-based features adds another dimension to the system's capability. Search for a destination and the system will check if there's sufficient fuel to complete the journey. If not, this will be flagged and filling stations on the route that are within range are shown on the map: tapping on one of them is all it takes to add it as a waypoint.
It's also possible to share destination, current location and estimated time of arrival (ETA) with others via email or text message1. If your ETA slips, the system can automatically follow-up with an update.
Commute Mode learns an owner's daily drive so that it can offer alternative routes to avoid congestion using historical and real-time traffic information. Approach Mode adds a 360-deg interactive view of your destination alongside the map display when you're approximately 656-ft (200m away) - it can even show you where the nearest available parking lots are and then direct you to them. A dedicated companion app for iOS® and Android™ devices enables true door-to-door route planning and guidance and can help you to complete your journey on public transport or on foot.
InControl Touch Pro™ is offered in conjunction with a Meridian® 17-speaker, 825W surround sound system which delivers ideal sound reproduction with benchmark low levels of distortion.
The experience is enriched with Gracenote images stored on the SSD drive -- and functions such as 'Play more like this' which automatically compiles playlists, or Music Queue, which makes it easy to search for and add songs, albums or artists to a music queue the current track is still playing.
The modules within InControl Touch Pro are connected using ultra-fast Ethernet. This advanced network technology is more than five times faster than competing conventionally wired technologies. Jaguar is one of the very first vehicle manufacturers to use it.
Ethernet's main advantage is its incredible bandwidth: up to 1Gb/second. The potential to carry such massive amounts of data, together with the performance of the quad-core processor and the solid-state drive means that InControl Touch Pro will be able to offer even greater functionality in the future.
The all-new F-PACE also brings the world debut of Jaguar's Activity Key. A waterproof, shockproof wristband with an integrated transponder, this wearable technology supports active lifestyles because it allows the keyfob to be securely locked inside the vehicle - invaluable, for example, if you're going surfing or kayaking.
Locking the all-new F-PACE using the Activity Key will disable any keyfobs left inside the SUV. Activity Key works on the same RF frequencies as the other keys and is used to lock and unlock the vehicle by holding it in close proximity to the J of the Jaguar lettering on the tailgate. Activity Key has no battery, so owners never have to worry about changing it.
InControl suite of technologies Jaguar InControl® Apps™ enables drivers to access apps on Android™ and Apple® smartphones using the InControl Touch™ and InControl Touch Pro™ infotainment systems1. After connecting the device using a USB cable and the dedicated port in the center console, compatible apps will be shown on the vehicle touch-screen. Optimized for in-vehicle use to reduce driver distraction, the range of approved third-party apps is growing constantly.
The F-PACE can be equipped to also function as a Wi-Fi hotspot, hosting up to eight devices simultaneously8. With a paid data plan, the integrated SIM card and the vehicle's antenna are used to provide a stable, reliable signal.
Jaguar InControl® Remote™ functionality allows users of iOS® and Android™ smartphones to connect to the car remotely to control car functions, including deactivating the alarm, locking or unlocking the doors, and remote heating or cooling the cabin through engine start.
If the vehicle is involved in a collision which triggers the airbags, InControl Protect™ will automatically notify the emergency services and provide the GPS location. The occupants can also manually trigger an emergency call by pressing a dedicated button in the roof console.
First Edition: Concept car design for the real world To celebrate the launch of the all-new F-PACE, a special model called the First Edition will be available in limited numbers, in the first year of production only.
Powered exclusively by the 380hp supercharged V6 found in the F-PACE S, the First Edition includes unique interior and exterior design enhancements that pay homage to the original C-X17 concept car unveiled at the 2013 Frankfurt Motor Show as well as sports car-derived performance technology including Adaptive Dynamics2.
Outside, the First Edition F-PACE will be available in Rhodium Silver paint finish set against 22-inch Double Helix 15-spoke wheels with Grey finish and contrast inserts. Red brake calipers, full-LED headlights with LED 'J' blade Daytime Running Lights, Gloss Black fender vents, a sliding panoramic roof and the S model body kit complete the enhancements found on the First Edition F-PACE.
Inside, Windsor soft-grain leather seats featuring twin-needle stitching and an embossed houndstooth pattern influenced by the award-winning interior from the C-X17 concept compliment the configurable 10-color ambient lighting, state-of-the-art Jaguar InControl® Touch Pro™ infotainment system1 and the 12.3-inch high definition virtual instrument cluster.
Pricing and Range Summary The all-new F-PACE range will consist of: F-PACE, F-PACE Premium, F-PACE Prestige, F-PACE R-Sport, F-PACE S and F-PACE First Edition. The powertrain range will consist of a 180hp 2.0-liter Ingenium diesel as well as 340hp and 380hp 3.0-liter V6 gas variants priced from $40,9907, $42,3907 and $56,7007 respectively.
BEST-IN-CLASS COVERAGE From the 2016 model year forward, all Jaguar models sold in the U.S. will feature Jaguar EliteCare, a new 5-year/60,000 mile ownership package4 that includes:
5-Year/60,000 Mile New Vehicle Limited Warranty
5-Year/60,000 Mile Complimentary Scheduled Maintenance
5-Year/60,000 Mile 24/7 Roadside Assistance
5-Year/Unlimited Mile Jaguar InControl®Remote & Protect™
On the eve of the Frankfurt Motor Show, Volkswagen has introduced the second-generation Volkswagen Tiguan.
The new model looks to be a smaller version of the Tiguan. As for overall size, the Tiguan has grown 2.4 inches in overall length, 1.2 inches in overall width, and 1.3 inches lower. Overall weight has dropped 110 pounds thanks in part to the Tiguan moving towards the MQB platform.
The interior takes a lot of ideas from the Golf in terms of design with a similar dash design and placement of various controls. Available on the options list is a 12.3 screen in the instrument cluster that provides various information and a heads-up display.
For the European marketplace, Volkswagen will offer eight engines - both gasoline and diesel - ranging from 123 to 237 horsepower. Front-wheel and Volkswagen's 4Motion all-wheel drive will be available.
Volkswagen also revealed the Tiguan GTE concept which pairs a 1.4 TSI four-cylinder with an electric motor to produce a total output of 215 horsepower. A 13 kWh battery offers 31 miles of electric-only range.
Volkswagen says the 2017 Tiguan will go on sale in Europe next spring. As for the U.S., Volkswagen hasn't said when we'll be seeing it. But the German automaker has announced a seven-seat version destined for U.S. and China will be shown next fall.
Press Release is on Page 2
VOLKSWAGEN REVEALS ALL-NEW EUROPEAN TIGUAN AT THE FRANKFURT INTERNATIONAL MOTOR SHOW
Sep 14, 2015
Based off the MQB platform, the new Tiguan revolutionises the compact SUV
Powerful, authentic SUV design of the new Tiguan was completely reconfigured
Tiguan is the first Volkswagen Group SUV to be based on the modular transverse matrix (MQB)
Longer, wider, lower – new vehicle architecture enables sportier proportions
Tiguan makes its debut at the IAA in an R-Line® version, a classic on-road version and a version with an off-road front end
Front Assist with City Emergency Braking and Pedestrian Monitoring, active hood, Lane Assist and the Automatic Post-Collision Braking System are fitted as standard
520 litres of cargo capacity (additional 50 litres) and considerably more space in the rear thanks to longer wheelbase
Broader range of power (92 kW / 125 PS to 176 kW / 240 PS) and up to 24 percent better fuel economy
Arrives on the market in April 2016
Volkswagen is also showing the Tiguan GTE concept in Frankfurt with a plug-in hybrid drive and 1.9 litre per 100 km fuel consumption
Newly conceptualised solar roof module for the Tiguan GTE increases its electric driving range
Wolfsburg / Frankfurt, September 2015 — After selling over 2.64 million of the first generation Tiguan SUV, Volkswagen is showing the newly developed European Tiguan at the Frankfurt International Motor Show. In this case, "new" means completely new, a revolution instead of an evolution. The second generation Tiguan is the first Volkswagen Group SUV whose design is based off the forward-looking MQB platform.
On-road, off-road and plug-in hybrid
Volkswagen is showing four versions of the new Tiguan simultaneously at Frankfurt. The production versions are the very sporty Tiguan R-Line®, the classic on-road model and a special off-road version. Meanwhile, the Tiguan GTE concept vehicle that has a 160 kW/218 PS plug-in hybrid drivetrain shows how the best-selling compact SUV could further develop. The Tiguan GTE is equipped with a solar module that generates renewable electricity that is fed into the battery, enabling up to 1,000 additional kilometres of zero emissions electric driving.
A-SUV segment is booming
According to Volkswagen forecasts, the A-SUV segment will increase its global sales from 8.17 million today to more than 8.93 million units by 2018, which represents 9 per cent growth. The new Tiguan is optimally tailored for the requirements in this market segment. Perfectly thought out from the first to the last millimetre, it appeals to millions of car drivers and their families as a spacious and flexible companion for their everyday business and personal lives – an all-round vehicle of a new era.
The first generation Tiguan launched at the end of 2007 and to date, more than 2.64 million units have been produced. Even though the next generation is ready to take over, Volkswagen earned first place in SUV new vehicle registrations in Germany once again in July 2015 – just as it did in the previous months and years. The general trend of rapid growth in the A-SUV segment is reflected par excellence in this model series. In 2014, more than 500,000 Tiguans were produced, which was 9 per cent more than in the prior year.
Product offensive – Volkswagen SUVs in all classes
For Volkswagen, the new Tiguan marks the beginning of an SUV product offensive. In upcoming years, the brand will be launching other innovative SUVs that are tailored to specific markets in a wide variety of segments worldwide. Volkswagen will be extending the range of SUV vehicles it offers, especially in the U.S. Forecasts indicate that the SUV share will also increase significantly in China and that additional SUV growth will also occur in Europe. Unlike in Europe, drivers in the U.S. and China prefer versions with a longer wheelbase, which is the reason the new Tiguan was systematically developed for two different wheelbases from the start. The "long" Tiguan will be introduced to specific markets starting in the Fall of 2016.
"The Compact SUV."
The MQB architecture improves all aspects of the Tiguan. The proportions of the latest Volkswagen SUV are even sportier, the design is truly charismatic, and the vehicle's weight was reduced by more than 110 pounds compared to the previous model. A gigantic leap forward has been made in terms of the vehicle's interior and trunk space: the capacity of the trunk has increased by 1.8 cubic feet, to 18.4 cu ft, and the load space can be enlarged to 21.8 cu ft by sliding the rear bench seat forward, by up to 7.1 inches. When the rear seat is folded, the cargo capacity is 58.5 cu ft, a gain of 5.1 cu ft.
The engines are more efficient as well. A broad range of eight engines are offered, ranging in output from 92 kW / 125 PS to 176 kW / 240 PS. The engines are more powerful, yet they are up to 24 per cent more fuel-efficient than the Euro 5 engines in the previous model. The new 4MOTION® Active Control system also makes it easier than ever to adapt the all-wheel drive to all possible conditions. The Tiguan is now designed to tow loads up to 5,512 pounds.
The new Tiguan has class leading connectivity and driver assistance features. The assistance systems include standard Front Assist with City Emergency Braking and Pedestrian Monitoring, Lane Assist and Automatic Post-Collision Braking System. Connectivity services include automatic accident notification, online traffic and parking space information, and a vehicle status report, while App-Connect integrates all current smartphone platforms with the infotainment system.
The result is a Tiguan which extensively redefines the A-SUV segment. It’s an SUV that satisfies all expectations – both on-road and off-road.
New features include a pyrotechnically activated mechanism – similar to an airbag – integrated in the hood. This mechanism raises the hood as soon as a person comes into contact with it in a crash. This increases the gap between the hard engine and the relatively soft bonnet and thereby reduces the intensity of dangerous head injuries.
Among the new Tiguan’s safety features, are the Automatic Post-Collision Braking System, the Front Assist ambient monitoring system including City Emergency Braking and – a new feature – Pedestrian Monitoring as standard. If the radar-based Front Assist of the Tiguan detects a person walking into the road, the system warns the driver. In a second step, it brakes the car. The new Tiguan is also equipped with Lane Assist as standard. This camera-based assistance system warns and automatically countersteers if the driver begins to unintentionally depart from the driving lane without activating a turn indicator.
The new, larger dimensions and proportions elevate the Tiguan from the previous model. At 176.6 inches in length, the new model is 2.4 in longer, and its wheelbase has been increased by 3.0 in to 105.6 in. The new vehicle is 72.4 in wide, which is 1.2 in more than before. Meanwhile, its height was reduced by 1.3 in to 64.3 in on the base, front-wheel-drive model. The coefficient of drag of the new Tiguan was reduced to 0.31 as well, thanks to numerous aerodynamic improvements, such as the door mirrors that were perfected in wind tunnel testing and airflow simulations: this has resulted in a 40 per cent reduction in overall air drag losses on the body.
The front end of the new Tiguan has a significantly wider stance. This is attributable to an actual increase in physical width plus the visual effect of the horizontally aligned radiator grille and headlights. The Tiguan is the first Volkswagen SUV to be equipped with dual LED headlights. Above the headlights, a chrome strip runs across the front of the car. Above the radiator grille and the headlights, the V-shaped hood shoots toward the windshield.
The vehicle's side profile is extremely distinctive. The waistline is higher compared with the previous model, which emphasises the SUV style. The character line is also higher and extends over the entire silhouette. The door handles are seamlessly positioned in this line. Beneath the upper line, a horizontal surface follows as a break, and then there is the second character line. Designers talk of a "line dialogue" here. The lower of these lines emphasizes the flared, powerful looking wheelarches and the shoulder section.
In contrast to the previous model, the area above the character line is a flatter and has a more elegant band of side windows. This band extends into the dynamically angled D-pillars. The lowest section of the body is an anthracite-coloured area that wraps around the vehicle; the same colour is used for the rugged plastic trim around the wheelarches. A chrome trim strip separates the body colour surfaces and the anthracite cladding. This chrome accent is continued at the rear.
The lateral character line becomes a defining rear element above the rear lights. The line defines the upper border of the standard LED rear lights that have a sharp horizontal cut. This cut is continued as a line between the rear lights and forms a trailing edge that is important aerodynamically. The tailgate opening was increased compared to the previous model, too. The lower part of the tail features an anthracite-coloured area and an aluminium-look diffuser that is integrated with the chrome-plated trapezoidal exhaust tailpipes.
The completely redesigned interior of the Tiguan has a decidedly sporty yet typically SUV character. The central elements are the instrument cluster (available as the digital Active Info Display) and the infotainment system that is positioned high in the centre stack and angled toward the driver. The dash panel and centre console form a single unit. The centre console itself is dominated by an array of buttons that are laid out around the gear lever. As on the exterior, the designers also systematically applied the "form follows function" principle and create a cockpit style atmosphere. The designers also emphasised the SUV nature of the interior in their choice of surface textures.
Thanks to clever packaging, seating space has been significantly improved in the new Tiguan, which has 1.0 in more interior length. Three passengers in the rear seating area, for instance, have 1.1 in more knee room. The size of the luggage compartment has also increased. At 18.4 cubic feet, the cargo capacity of the new model has increased by 1.8 cu ft (with five persons on-board). In addition, the rear bench seat is asymmetrically split and adjustable longitudinally. The reclining angle of the seat backrest can also be adjusted. The cargo area can be enlarged to 21.8 cu ft by sliding the rear bench seat forward (by up to 7.1 inches). When the rear bench is folded, this results in a volume of 58.5 cu ft. If necessary, the backrest of the front passenger seat can be folded fully forward for stowing very long items. Last but not least, it is now even easier to load the Tiguan, because the load sill has been lowered further.
An electronic marvel
The new Tiguan is one of the world's most advanced compact SUVs, featuring an impressive array of innovations. First, there are technologies like the 12.3-inch Active Info display (interactive, fully digital main instruments with five information profiles) and the head-up display that is being offered for the first time in a Volkswagen SUV. Second, the vehicle's safety, convenience and connectivity have been taken to a new level by an array of driver assistance and infotainment systems.
Even the base Trendline model has a number of advanced standard features. These include Front Assist that features City Emergency Braking and Pedestrian Monitoring as well as the active hood and the Lane Assist lane departure warning system. In addition, the safety equipment is completed by a network of seven airbags, including a knee airbag on the driver's side, and the Automatic Post-Collision Braking System; it helps to avoid secondary collisions. Comfortline mid-level trims have the Driver Alert System as standard.
The top Highline trim is also equipped with adaptive cruise control (ACC), which utilizes radar to accelerate or brake the Tiguan and thus always maintain the correct distance to traffic ahead. If the SUV is equipped with DSG® in addition to ACC, it automatically handles stop-and-go traffic as well (traffic jam assist). Other Tiguan driver assistance systems include the optional Side Assist (lane-changing assistant), Pre-Crash proactive occupant protection (detects elevated collision potential, tensions the front seatbelts to preventively restrain the driver and front passenger and closes open windows and the sunroof to just a small gap), Emergency Assist (recognises if the driver is no longer responsive and brakes the car to a stop) and Area View (360 degree all-round view using four cameras that is especially useful off-road).
Comfort and convenience
The new Tiguan has a new three-zone automatic climate control system, called Pure Air Climatronic®. The technology, which is unique and so far only used by Volkswagen, keeps air quality at a consistently high level thanks to its air quality sensor and active biogenic filter, preventing pollutants from entering the car – from mold spores to allergens.
Fully redesigned seats have optional electric adjustment, while the available Smart Comfort Seats automatically travel downward and back to make it easier to enter and exit the vehicle when the ignition is turned off. In addition, the new ergoActive seat includes electric 4-way lumbar support and massage function.
Making trips long and short even more pleasant, the Tiguan has one of the largest panoramic sunroofs in the class (34.3 by 53.7 inches), which also features integrated ambient lighting. Other new comfort and convenience features include Easy Open / Easy Close (automatic opening or closing of the tailgate in response to a specific foot movement behind the Tiguan), a heatable steering wheel, and Volkswagen’s variable ratio electromechanical progressive steering.
Infotainment and connectivity
The Trendline trim is equipped with the Composition Touch radio system (5.0-inch monochrome touchscreen) as standard. The Tiguan Comfortline and Highline get the Composition Colour radio system (5.0-inch colour touchscreen) at no extra charge. The Composition Media radio system (8.0-inch colour touchscreen) is also available. Other options are the Discover Media and Discover Pro radio-navigation systems (both have 8.0-inch displays). All of these systems are part of the second generation modular infotainment matrix (MIB II).
MIB II creates seamless connectivity with today's Apple and Android smartphones via App Connect. In addition to MirrorLink®, App Connect also integrates Apple CarPlay® and Google Android Auto™ into the infotainment systems. The Media Control app makes Volkswagen one of the first automakers to also offer an interface to the infotainment system for tablets. Volkswagen also offers a number of online services. Guide & Inform lets users access services such as latest traffic warnings, information on available parking spaces in nearby car parks (number of spaces and address) and information on filling stations (fuel prices and addresses). For the first time, Volkswagen is also offering Security & Service, which can be used to request assistance from the vehicle via a call centre. Some of the features integrated here are online road service call, automatic accident notification, service scheduling (to arrange maintenance appointments for the Tiguan with the service centre) and requesting the vehicle status report. Depending on the package that is selected, it may also be possible to use a smartphone to request vehicle status or parking location or activate the parking heater function.
The smartphone itself can be placed conveniently in a newly designed and innovative interface box. The highlight here is that the phone can be charged and coupled to the vehicle's outside antenna inductively.
There are a total of eight Euro-6 compliant engines, all of which have turbocharging, direct injection, a stop-start system and battery regeneration as standard. The four TSI® gasoline engines produce 92 kW / 125 PS, 110 kW / 150 PS, 132 kW / 180 PS and 162 kW / 220 PS. The four TDI® diesel engines produce 85 kW / 115 PS, 110 kW / 150 PS, 140 kW / 190 PS and 176 kW / 240 PS. The base engines of the new Tiguan are launched with front-wheel drive, but all of the other engines are available with all-wheel drive either as an option or as standard. Compared to the previous model with Euro-5 engines, the four-cylinder engines in the new Tiguan are up to 24 per cent more fuel-efficient. Compared to previous Tiguans with Euro-6 engines, there is up to 10 percent better fuel efficiency.
Not only are the engines more efficient, they are also more powerful. The highest powered TSI engine previously made 150 PS in Europe, but now has two 2.0-litre engines with 180 and 220 PS. With the diesel engines, the most powerful TDI used to make 184 PS. This engine now makes 190 PS, but the top engine is the newly engineered 240-PS unit with twin turbos charging and 2,500 bar of injection pressure. With 88 kW / 120 PS per litre of displacement, the 2.0 TDI has one of the highest specific power outputs in the A-SUV segment.
4MOTION all-wheel drive
Volkswagen offers the highly efficient 4MOTION all-wheel drive system in the new Tiguan, either as an option or as standard, depending on the chosen engine. Ground clearance of all Tiguan 4MOTION versions is 0.4 inches higher, at 7.9 inches. In addition, the Tiguan can be ordered with a special off-road front end package that allows for an approach angle is 25.6 instead of 18.3 degrees. The departure angle at the rear is 24.7 degrees for all versions, as is the ramp angle. Specially developed for the new Tiguan is 4MOTION Active Control – an off-road switch with four different modes. Regardless of whether the vehicle has an on-road or off-road front end design, the new Tiguan is engineered for towing more than 5,500 pounds.
The 4MOTION all-wheel drive system uses a fifth-generation Haldex® coupling that actively distributes torque to all four wheels before slip occurs. In normal driving, only the front wheels are driven, saving fuel. But as soon as there is a risk of losing traction, the rear axle is variably engaged within fractions of a second. Along with the Haldex coupling, the electronic differential locks (EDS) integrated in the electronic stability control (ESC) system act as a transverse lock for all four wheels.
The rotary/pushbutton switch for the new 4MOTION Active Control is located on the centre console. The driver uses it to activate four higher-level modes and various popup menus. When the driver turns the switch to the left, one of the Onroad or Snow profiles can be activated for on-road driving. When the driver pushes the switch in one of these modes, a popup menu appears on the infotainment system’s touchscreen, showing the driving profile selection with five profiles. When the switch is turned to the right, the driver can select one of the two off-road profiles: Offroad (automatic setting of off-road parameters) or Offroad Individual (variable settings). Here too, pressing the switch opens another menu level. When driving off-road, 4MOTION Active Control lets drivers switch the assistance systems in just seconds.
Trim lines and packages
The new Tiguan will be available in the Trendline, Comfortline and Highline equipment lines in Europe. All versions may be ordered with an off-road front end as an alternative. The Tiguan Comfortline and Tiguan Highline feature a sporty look with the 'normal' front end. The new R-Line packages make the SUV look even more dynamic. The Comfortline and Highline may also be ordered with the Design package or in the Exclusive equipment specification.
The R-Line packages can be ordered as either a total package of exterior and interior features or an alternative exterior package. On the exterior, the R-Line features "Sebring" 19-inch aluminium-alloy wheels or optional 20-inch "Suzuka" alloys. Previously, Tiguans could only have rims up to 19 inches in diameter.
Except for the wheelarches, all other anthracite body surfaces are painted in body colour, including the exclusive door trims which have the same visual effect as side sill extensions. The exterior design is finished by R-Line bumpers that have gloss black aerodynamic accents, a two-tone roof spoiler and a gloss black rear diffuser. The interior features R-Line seats (cloth and microfiber seat upholstery, optional "Vienna" leather upholstery), aluminium door sill guards with the R-Line logo that can be optionally illuminated, decorative stitching in Crystal Grey, special trim accents, stainless steel pedal caps and footrest, black headliner and a leather-trimmed multifunction steering wheel with the R-Line logo.
Plug-in hybrid concept—with a solar roof!
Wolfsburg / Frankfurt, September 2015 — Demonstrating the future directions the Tiguan might take is the Tiguan GTE – the first plug-in hybrid SUV from Volkswagen, which the brand is showing at the IAA. This Volkswagen, which is being presented as a concept vehicle, develops a system power of 160 kW / 218 PS and can cover a distance of up to 50 km in "E-Mode" driving as an all-electric zero-emission vehicle. Its average fuel consumption (combined) is a mere 1.9 l/100 km; this equates to a CO2 emissions figure of 42 g/km. The relatively long electric driving range not only benefits from the externally chargeable lithium-ion battery with an energy capacity of 13.0 kWh, but also from a solar module that is integrated in the roof – a world exclusive. Under ideal conditions, the energy that it generates annually is sufficient to add up to 1,000 km of driving range (Germany 500 km, Southern Europe 800 to 1,000 km), depending on the regional solar radiation power.
TSI plus E plus DSG
The concept car is driven via its front axle by a direct-injection turbocharged petrol engine (1.4 TSI with 115 kW) and an electric motor. The lithium-ion high-voltage battery supplies the electric motor with energy. The Tiguan GTE operates with a 6-speed dual-clutch gearbox (DSG) that was specially developed for hybrid use. The electric motor was integrated into the gearbox housing. Additional components of the hybrid drive include the power electronics (converts DC power from the battery to AC power for the electric motor) and a charger. The Tiguan GTE can be driven in the described E-Mode or in one of the three other modes Hybrid, Battery Charge, or GTE. After starting the drive system, the concept vehicle automatically drives off in "E-Mode". When a minimum charge level of the battery has been reached or when there is very high demand for power, the drive system automatically switches over to the "Hybrid" mode. This means that "E-Mode" is deactivated, and the Tiguan GTE now behaves like a classic full hybrid vehicle. It charges the battery regeneratively during deceleration and automatically uses the TSI and/or electric motor according to the driving situation. By pressing the "E-Mode" button, the driver can manually switch to zero-emissions operation if necessary. Exclusively driven by electric motor, the Tiguan then has a top speed of 130 km/h.
GTE mode as boost function
The driver presses the GTE button to switch to GTE mode, which activates the sporty side of the concept car. This GTE mode is an exclusive feature of all Volkswagen vehicles with a plug-in hybrid drive system. The characteristics of the accelerator pedal, gearbox and steering are made noticeably more dynamic, and the tuning of the TSI is more performance oriented. In addition, in the GTE mode the TSI and electric motor work together in what is known as "boosting" which makes the full system power and the maximum system torque available. The Tiguan GTE then has a top speed of 200 km/h and accelerates to 100 km/h in a short 8.1 seconds.
And now, the first SUV from Bentley! (You Don't Need Cover Your Eyes For This)
We knew it was coming and Bentley has revealed it before Frankfurt. Meet the 2017 Bentley Bentayga, the luxury automaker's first SUV - along with being the fastest and most powerful one.
The Bentayga is the result of Bentley going back to the drawing board and revising the EXP 9F concept that got a lukewarm reception at the 2012 Geneva Motor Show. The SUV bears a number of design cues seen on Bentley's current lineup such as as four round LED headlamps, mesh grille insert, and crease along the hood. The side profile boasts muscular haunches and a bold character line. One of the interesting features of the Bentayga deals with the roof as 60 percent is made up of glass. Comprised of two panes, the front one has the ability to tilt and slide.
The interior is comprised of handcrafted leather, wood, and metal trim. The front seats get power adjustments and feature ventilation, heating, and massage functions. The rear offers seating for two or three people. Technology-wise, the Bentayga features a eight-inch touchscreen in the dashboard with a 60GB hard drive, 10.2-inch Android tablet for rear-seat entertainment, and the choice of three different audio systems.
Power comes from a 6.0L twin-turbo W12 with 600 horsepower and 664 pound-feet of torque. Paired with an eight-speed automatic and all-wheel drive, the Bentayga can hit 60 MPH in 4 seconds and reach a top speed of 187 MPH, making it the fastest SUV 'in the world'. Other mechanical bits include a four-mode adjustable air suspension, electronic active roll control, and a electric power-assisted variable steering system.
Bentley will begin deliveries of the Bentayga next spring.
Press Release is on Page 2
BENTLEY BENTAYGA: THE FASTEST, MOST POWERFUL, MOST LUXURIOUS AND MOST EXCLUSIVE SUV IN THE WORLD
A true Bentley, combining unparalleled luxury with sporting ability, off-road performance and everyday usability
Innovative and advanced technology – cutting-edge features with trademark exquisite luxury
Designed, engineered and built in Crewe, UK, sector-defining SUV takes Bentley luxury to new places
Sculptural design with elegant, timeless execution, balances athleticism with presence
Bentley workforce blend exceptional craft and skill with modern production techniques and materials
Intricate detailing and precision in wood, metal and leather creates a modern, luxurious handcrafted interior
Effortless Bentley performance, unrestrained by climate or terrain
A new highly advanced chassis for ultimate ride quality and comfort
All-new Crewe-built W12 offers unrivalled power and torque, efficiency and refinement, the most powerful and fastest SUV ever
Launch model is joined later by high performance, clean technology diesel and plug-in hybrid, as well as a seven seat option
(Crewe, 9 September, 2015) Bentley Motors is today announcing full details of its pinnacle, sector-defining new model, the Bentayga.
The Bentley Bentayga combines unparalleled luxury with effortless performance and everyday usability.
With an all-new W12 powertrain, the Bentayga is the fastest, most powerful, most luxurious and most exclusive SUV in the world. It offers a true Bentley driving experience and showcases innovative technology features.
Designed, engineered and handcrafted in Crewe, the Bentayga’s styling is pure Bentley. Sculptural with an elegant, timeless execution, it perfectly balances athleticism with confidence. From the four round LED headlamps and large matrix grille, to the distinctive power line and muscular haunches, the Bentley DNA is apparent throughout.
The Bentley Bentayga boasts the world’s finest automotive cabin, with unrivalled levels of precision. The detailing in metal, wood and leather – including meticulous tolerances between elements of trim – is the epitome of modern British luxury. This level of perfection is only achievable thanks to the exceptional craft and skill of Bentley’s colleagues in Crewe.
An all-new twin-turbocharged 6.0-litre W12 engine is at the heart of the new Bentayga. The mighty 12-cylinder unit combines efficiency and refinement with ultra-luxurious levels of power and torque. With 608 PS (600 bhp / 447kW) and 900 Nm (663 lb. ft) delivering a 0-60 mph time of 4.0 seconds (0-100 km/h in 4.1 seconds) and a top speed of 187 mph (301 km/h), the Bentayga is the world’s most powerful and fastest SUV.
Wolfgang Dürheimer, chairman and chief executive of Bentley Motors, comments: “The Bentayga is truly the Bentley of SUVs. It redefines luxury in the SUV sector and offers a genuine Bentley experience in any environment, thanks to a combination of unparalleled attention to detail, go-anywhere ability and cutting-edge technology. With this extraordinary car we are looking forward
to an exciting period of strong growth and sales success for Bentley. The Bentayga is the next step in our brand’s bold future.”
The Bentayga will make its full public debut at the IAA Frankfurt Show from 15 to 27 September. Customer deliveries commence in early 2016.
Further details about the Bentayga, including video interviews with key members of the design and development team, are available at www.bentleymedia.com.
Innovative Features and Advanced Technologies A suite of state-of-the-art driver assistance systems and infotainment features designed to enhance safety, comfort and convenience make the Bentayga an innovative, advanced and connected luxury SUV.
It offers the widest range of on- and off-road drive settings of any vehicle via Bentley’s Drive Dynamics Mode and optional Responsive Off-Road Setting. Up to eight modes are available, allowing drivers, at the simple turn of a dial, to select the perfect dynamic set-up for any surface or road condition. This versatility is complemented by Bentley Dynamic Ride (electrically activated 48V active roll control) and Electric Power-Assisted Steering (EPAS).
Responsive Off-Road Setting allows the customer to select the appropriate vehicle settings for a wide range of off-road surfaces, while the Driver Information Panel displays information on pitch, roll, wheel articulation, steering angle, compass bearing and altitude.
Adaptive Cruise Control (ACC) including Stop & Go, Predictive ACC and Traffic Assist enables the driver to maintain a set distance to the vehicle in front. Predictive ACC uses the navigation data, sensors and cameras to predict upcoming corners, city boundaries and speed-limit changes and can then modify the vehicle speed accordingly, improving both comfort and fuel economy.
In urban environments, there are a number of driver aids available on the Bentayga. These systems – such as Traffic Sign Recognition, which detects a wide variety of traffic signs and displays information to the driver; Rear Crossing Traffic Warning, which uses radar technology to detect crossing traffic when reversing out of a parking space; and Top View, a system which uses four cameras to display an overall picture of the vehicle’s surroundings – combine to enhance everyday usability.
The Bentayga is also available with Park Assist – a system that detects suitable parking spaces (both parallel and perpendicular) before autonomous steering takes over to support parking manoeuvres, even in narrow and tricky spaces.
Other innovative systems available on the Bentayga include Electronic Night Vision, which uses infra-red technology to identify potential obstacles ahead, and a Head-Up Display, which reduces driver distraction and increases safety.
The Bentayga’s all-new, cutting-edge 8” touch screen infotainment system boasts class-leading navigation technology, a 60GB hard drive, and a choice of up to 30 languages.
Rear seat passengers benefit from the introduction of the Bentley Entertainment Tablet – a removable 10.2” Android device with 4G, WiFi and Bluetooth for effortless, high-speed on-board connectivity.
Customers can choose between three different sound systems for the Bentayga: Bentley Standard Audio, Bentley Signature Audio and Naim for Bentley Premium Audio. The latter is the most powerful system in the segment, with 1,950 watts, a network of 18 speakers and super-tweeters for unrivalled recreation of the highest audio frequencies.
Sculptural Form, Sharp Lines and Elegant Execution The Bentayga’s wheel arches, fenders and bonnet deliver a balance between sportiness and SUV presence. The ultra-sharp Bentley power line and muscular rear haunch display a taut tension in side profile, as part of the largest single-piece aluminium pressing in the automotive world. Trademark Bentley features such as the large matrix grille and B-shaped wing vents afford the Bentayga a modern, dynamic elegance.
The grille is flanked by four distinctive floating all-LED headlamps. The lights sit flush within the seamless superformed aluminium front fenders. Innovative design features, like the discreet headlamp washers contained within the outer lamp’s body-coloured centre, demonstrate remarkable attention to detail.
To emphasise the go-anywhere nature of the Bentayga, the Bentley design team have integrated a stylish skid plate into the lower section of the front bumper, just below the floating wing motif.
At the rear, within the segmented tail lights, a new ‘B’-shaped illumination graphic is incorporated that affords the Bentayga an instantly recognisable and striking night-time signature.
A combination of advanced design, innovative engineering and state-of-the-art manufacturing technologies - including the use of lightweight aluminium - has enabled a total weight saving of 236kg compared to a traditional body construction.
As standard, the Bentayga comes with a panoramic glass roof. Making up almost 60 per cent of the total roof surface, the 1.35m2 glass feature is split into two panes. The front panel tilts and slides, and the whole glass surface can be obscured via an electric, full-length roller blind.
Either side of the glass roof are aluminium roof rails that combine two different finishes – a high-gloss black base and bright anodised top section.
A new range of bespoke Bentayga alloy wheels are available, ranging in size from 20” to 22”.
The World’s Finest Cabin, Handcrafted at the Home of Bentley Step inside the new Bentayga and you find the finest automotive interior in the world, with handcrafted wood and leather throughout – engineered with precision to deliver absolute perfection.
The attention to detail in metal, wood and leather is the epitome of modern British luxury, and is only achievable thanks to the exceptional skill of the workforce in Crewe.
The Bentayga’s cockpit sets new standards for both luxury and precision, with meticulous tolerances between the exquisite veneered woods and metal elements. The dashboard takes the iconic Bentley ‘wing’ design as its inspiration, with the beautifully finished surfaces flowing gracefully from door to door over the top of the instrument binnacles, down under the centre console and back up around the passenger side fascia and foot well.
The hand-selected veneers form pure and elegant surfaces throughout the cabin, and each of the 15 pieces are shaped by Bentley’s artisans from a choice of seven different veneers, and finished with trademark Bentley attention to detail.
Highly polished, handcrafted metal elements adorn the dashboard, centre console and doors. Trademark Bentley knurling on the drive mode selector, gear knob, iconic bulls-eye vents and organ pulls adds sophistication and tactile refinement.
Sumptuous front seats, individually handcrafted in Crewe and featuring 22-way adjustment including adjustable cushion and backrest bolsters, provide superb support and comfort for all conditions. This cosseted feeling is further enhanced with a six-programme massage system, seat heating and ventilation.
Whether selected in four- or five-seat configuration, all of the leather seats in the Bentayga are available with contrast stitching and a quilted diamond design applied to the ‘shoulders’ and bolsters, echoing the design of a finely tailored British hunting jacket.
Bentley specialists individually select only the finest bull hides, all of which are sourced from cool European climates, naturally tanned and never over-printed.. Customers have the choice of 15 colours, in three duo-tone and one single mono-tone colour split.
The four-seat configuration makes the ultimate statement in design, comfort and luxury. The two individual rear seats adjust in 18 different ways and include massage and ventilation functions as well as footrests. The veneered rear console hides additional functionality such as cup holders, generous storage areas and USB charging sockets.
The opulent feeling is completed by the fixed back, dividing the interior cabin from the boot. Also trimmed in the signature diamond quilting and including a ski-hatch, it creates an enclosed rear cabin space that sets new standards in the SUV sector.
A full-length panoramic sunroof with acoustic interlays allows ample natural sunlight to highlight the surfaces and detailing.
Activate the hands-free tailgate and not only is a large, practical storage space revealed, but also another of the Bentayga’s unique features – the optional folding event seat. Ideal for those wishing to stop for a moment and enjoy a spectacular outdoor environment or pursuit, the innovative leather-trimmed folding seat matches exactly the style of the cabin seats and integrates seamlessly into the rear of the car with characteristic attention to detail.
All-New W12 – Efficiency with Unrivalled Power and Torque At the heart of the Bentayga is the all-new Crewe-built W12 TSI engine. This 6.0-litre twin-turbo unit combines efficiency and refinement with the luxury of unrivalled power and torque.
It is the most technologically advanced 12-cylinder engine in the world and develops 600 bhp (608 PS / 447 kW) @ 6,000 rpm and 900 Nm (663 lb ft) from 1,250 rpm to 4,500 rpm. These mighty outputs result in equally impressive performance figures. The Bentayga is capable of dispatching the sprint to 60 mph in just 4.0 seconds (0-100 km/h in 4.1 seconds) on its way to a top speed of 187 mph (301 km/h).
The new W12 uses both direct and indirect fuel injection. Switching seamlessly between the two technologies, the combination of these systems maximises refinement, delivers low particulate emissions and maximises power and torque delivery.
An impressive efficiency figure of 292 g/km CO2 is made possible in part thanks to Bentley’s Variable Displacement system, which shuts down half of the engine under defined conditions. Intake and exhaust valves, fuel injection and ignition are all shut down on defined cylinders, with the engine running as a six-cylinder for improved efficiency.
The engine is mated to an eight-speed automatic gearbox. The transmission and four-wheel-drive system has been strengthened to handle the demands and high torque levels of off-road driving.
In Bentley’s advanced application of Start-Stop technology for the Bentayga, coasting is also available, as the engine rests not only when the vehicle is stationary but also at ‘near to stop’ speeds.
In 5th to 8th gear, when the driver releases the throttle (at motorway cruising speed, for example) the car will open the torque converter, dropping the engine to idle and simply allowing the car to roll or ‘sail’. When the throttle is reapplied, or the car starts going downhill and detects an increase in speed, the transmission is re-engaged.
The new W12 sees a 11.9% efficiency improvement compared to the existing powertrain. The Bentayga will also be available as diesel and hybrid variants in the future.
Genuine Luxury with Go-Anywhere Ability Never before has a vehicle so coherently combined genuine luxury with go-anywhere driving ability.
The development programme for the Bentayga has been the most exhaustive in the Bentley brand’s history, ranging across five continents. From the dirt and gravel of South Africa and the dunes of Dubai, to the muddy fields of Cheshire, and from -30°C in the frozen North Cape to searing 50°C desert heat, the Bentayga’s ability to perform on any surface and even in the most extreme conditions has been proven.
The Bentayga has also driven more than 400 laps of the famous Nürburgring Nordschleife circuit, as part of developing the dynamic performance of the chassis and fine-tuning the relevant control and stability systems. The unique features of the Nordschleife, including the high level of topographical change, variety of surface grip levels and wide range of cornering speeds, made it the perfect place to develop the fastest, most powerful SUV in the world.
The Bentayga introduces Bentley Dynamic Ride – the world’s first electric active roll control technology that utilises an unrivalled 48V system. Inherent in larger vehicles with a higher centre of gravity, this system instantly counteracts lateral rolling forces when cornering and ensures maximum tyre contact to deliver class-leading cabin stability, ride comfort and exceptional handling.
While conventional anti-roll bars present a compromise between body control and ride comfort, Bentley’s adaptive and reactive system provides variable torsional resistance, allowing the Bentayga to be both dynamically capable and comfortable for all occupants at all times. The pioneering use of a 48V system results in silent, instantaneous responses and sufficient power on hand to deal with all road surfaces.
Electric Power-Assisted Steering (EPAS) is also featured on the Bentayga. The new system improves feedback to the driver, while providing isolation from steering kick-back both on- and off-road. EPAS also features a variable rack ratio, permitting light and fast steering while manoeuvring at low speeds, as well as a more subdued response for excellent stability at high speeds.
The Bentayga offers class-leading ride comfort, steering feel and handling thanks to the partnership of a highly sophisticated chassis and Electronic Stability Control (ESC). In addition to advanced, multi-mode Traction Control (TCS), the Bentayga also features Hill Descent Control (HDC).
HDC automatically regulates the vehicle’s speed on steep declines, allowing the driver to concentrate fully on steering and obstacles ahead. It can be pre-set at speeds between two and 30 km/h (going in either direction) and works on gradients greater than five per cent.
As with all Bentleys, the Bentayga comes with multi-mode air suspension. The Bentayga driver has four different modes to choose from: High 2, High 1, Normal and Low. High 2, for example, can be manually selected when tackling more severe off-road surfaces. Customers can also lower the rear suspension via a switch in the boot, to ease loading and trailer hitching.
Bentley Personalisation Options and Mulliner Bespoke The Bentayga redefines personalisation and bespoke luxury. Paint, leather, veneer and lifestyle options are unlimited and tailored to the individual.
The standard palette alone comprises 17 exterior paint colours, with up to 90 hues available in the extended range. There are also 15 luxurious carpet options, seven different handcrafted veneers and 15 choices of interior trim hide, which means that customers are able to specify their own choice of luxury finish. In addition, customers can choose between a new range of bespoke Bentayga alloy wheels, ranging in size from 20” to 22”.
Six lifestyle-orientated specification packages will be available from launch, including two styling packs. In addition to these options, the Bentayga is available with the widest range of lifestyle accessories ever offered by the Bentley brand. For example, customers with an interest in watersports may wish to specify the Load-Assist Tray and Wet Gear Stowage options.
As with all Bentleys, the Bentayga can also be handed over to the highly skilled and dedicated craftspeople at Mulliner, who will respond to bespoke customer requirements.
At launch, the Bentayga is available with an exquisite integrated Mulliner Hamper Set, complete with refrigerator, bespoke fine Linley china cutlery, crockery and crystal glass, and storage area for dry goods. For comfort in the great outdoors, sections of the hamper can be removed and used as seats.
A bespoke mechanical Mulliner Tourbillon by Breitling clock can also be specified. The most complex of watch mechanisms, the Mulliner Tourbillon is automatically wound periodically by a dedicated high-precision winding mechanism within the car. This masterpiece is machined in solid gold (customers can select from either rose or white gold), with a choice of either a mother-of-pearl or black ebony face and decorated with eight diamond indexes.
After some leaks showing off the vehicle, Kia has decided to release some pictures of the next-generation Sportage before its official debut at Frankfurt Motor Show next month.
Compared to the current Sportage, the new model is much bolder thanks to a lower and wider “tiger nose” grille, new headlights, and wider fenders. Kia designer's retain the distinctive swept-back silhouette of the current model.
We don't have any details on the interior or powertrains. Kia is keeping those under wraps till next month.
Press Release is on Page 2
Dynamic energy: Bold new exterior design for next-generation Kia Sportage
Kia Motors has today revealed the first official exterior images of the all-new Kia Sportage, featuring an attractive new design. The all-new Sportage will make its global debut at the Frankfurt International Motor Show on 15 September 2015. Entering its fourth-generation, the all-new Kia Sportage features a bold, progressive design, with the vehicle's designers creating a sense of power and agility from every angle. Echoing the contrast of smooth and sharp shapes found on some of the most iconic modern fighter jets, the Sportage creates visual harmony out of the tension between sharp, defined feature lines and smooth surfacing. The 'face' of the all-new Sportage represents the biggest change to the car's design, with the car's headlamps no longer integrated with the grille for the new model, instead sweeping back along the outer edges of the more sharply-detailed bonnet and bolder wheel arches. Immediately recognisable as a Kia, the Sportage's lower, wider 'tiger-nose' grille adds more volume to the lower half of the Sportage's face, resulting in a more imposing appearance and a more stable-looking stance. The all-new Sportage is characterised by its sportier, more raked profile. From the side, the all-new Sportage retains the swept-back silhouette of the outgoing model, with a roofline that tapers slightly towards the rear of the car, longer front overhangs, shorter rear overhangs and longer wheelbase. Smooth bodywork, bolder wheel arches and sharp lines endow the Sportage with a more dynamic, muscular look. At the rear, the horizontal forms and surface volume emphasise the car's width and give the compact SUV a more stable appearance. Inspired by the 2013 Kia Provo concept car, the slim combination lamps are joined by a strip that runs the width of the rear, while turn signals and reversing lights are separated, relocated lower down to add more visual weight and a greater sense of stability to the lower half of the car. The design of the new Sportage has been led by Kia's European design studio in Frankfurt, Germany, with input from the brand's Namyang, Korea and Irvine, California design centres
Staff Writer - CheersandGears.com
September 10, 2013
Mercedes-Benz has unveiled the S-Class Coupe Concept today at the Frankfurt Motor Show. The concept marks the end of the CL-Class and the return of the S-Class nameplate to Mercedes' large coupe.
The S-Class Coupe Concept is much more striking than the new S-Class sedan with a taller beltline, short greenhouse, long front end, distinctive grille, and missing B-Pillar side profile. Moving inside, Mercedes-Benz has placed the dashboard from the new S-Class and seating for four people.
Powering the the concept is a 4.7L Twin-Turbo V8 with 449 horsepower and 516 pound-feet of torque.
Expect a toned-down version of the S-Class Coupe to be shown within the next couple of years.
William Maley is a staff writer for Cheers & Gears. He can be reached at email@example.com you can follow him on twitter at @realmudmonster.
Press Release is on Page 2
Sensual clarity as an expression of modern luxury
MONTVALE, NJ - Traditionally the top of the Mercedes-Benz product range is occupied by the grand coupé. The Concept S-Class Coupé provides a clear vision of the next model generation at the International Motor Show (IAA) in Frankfurt: with its gorgeous appearance and self assured style it embodies the design philosophy of sensual clarity. In the interior with its spectacular architecture and truly exclusive appointments the four-seater defines the state of the art of modern luxury.
"The new S-Class Sedan was received enthusiastically in the market and perfectly lives up to its role as a representative of the power of innovation of Mercedes-Benz," says Dr. Joachim Schmidt, Member of the Management Board of Mercedes-Benz Cars, Sales & Marketing. "On the S-Class Coupé as the traditional top of our product range, the designers take advantage of their additional freedom and thus create an automotive masterpiece."
Gorden Wagener, Vice President Design at Daimler AG, adds: "The Concept S-Class Coupé combines tradition and emotion, and is a symbol for the embodiment of our design style of sensual clarity. The perfected design with self-assured style and the highly exclusive appointments make the coupé a true design icon and an expression of modern luxury."
Design: sensual clarity at its most captivating
Sensual clarity as an expression of modern luxury – this was the focus for the designers, and is the design philosophy of Mercedes-Benz. The goal is to create clear contours and smooth surfaces that express high technology while exuding emotional appeal. The sensual clarity is reflected in the core design values of tradition, emotion and progressivism. These are the guiding star, and are accentuated differently depending on the model. Mercedes-Benz creates a bridge between modernity and the avant-garde, between tradition and progressivism. Each model series has an assigned role and a very specific character, depending on the attributes on which the design focuses. And yet a Mercedes-Benz is always recognizable as a Mercedes-Benz. The designers draw from a gene-pool of styling features typical of the brand, incorporating new stylistic developments in the interests of keeping tradition alive.
"Design needs the sublime! Because design is the best brand ambassador. At the center of our work is sensual clarity as an expression of modern luxury, because this is precisely what gets to the heart of our brand philosophy – the bipolarity of intelligence and emotion," says Wagener.
The exterior: flowing profile of perfect proportions
The flowing profile of the Concept S-Class Coupé embodies sensual clarity in a modern way. It is characterized by typical rear-wheel drive proportions, which are emphasized by the Mercedes-typical signature, the dropping line. The long hood with distinctive lines and powerdomes, the crouched greenhouse with high beltline, the accentuated wheel arches as well as the 21-inch wheels (tires at front 265/35 R 21, at rear 295/35 R 21) and the visually broad rear substantiate the claim of the Concept S-Class Coupé as a masterpiece of automotive refinement. With a wheelbase of 116 inches the coupé measures 198.8 inches in length, 77 inches in width and 55.5 inches in height.
Positively arched surfaces give the Concept S-Class Coupé a sensual character. The sculpted appearance lends it classic elegance that forms a perfect symbiosis with the modern-progressive design idiom.
The view from the side is marked by the dropping line in keeping with the emotional character of the vehicle. It underscores the brand-typical proportions like a signature. The lines are deliberately reduced to the basics. This creates a timeless clarity.
The creative interaction of various design elements lend the Concept S-Class Coupé a superior and self-assured front: in the middle is the three-dimensional and further evolved diamond radiator grille, whose structure is defined by rectangular, dark chrome-plated elements. It frames the central Mercedes star and one blade.
The full-LED headlamps with their iconic eyebrows as daytime driving lamps lend it an extremely self-assured and distinctive gaze. On the Concept S-Class Coupé the eyebrows have been further advanced with a semicircular counterswish. The diamond-look of the headlamps and the tail lamps underline the luxurious appointments of the show car.
The side profile is defined by the dome-shaped stretched roof line and frameless doors. An elegant, three-dimensional chrome frame surrounds the glass areas that are uninterrupted by B-pillars. This underscores the typical Mercedes coupé look. In designing the pillared exterior mirrors the designers
took liberties offered by a concept car and made them especially slim, giving them an elegant appearance.
A muscle above the rear axle protruding from the side wall generates a sense of lightness and dynamic spirit even at a standstill. The positively arched surfaces and lines of the side walls flow into the rear end with a dramatic tapered effect.
The rear end with its surfaces, broad shoulders and distinctive character lines rounds out the emotional overall appearance. Moving the license plate to the lower bumper section allows positioning the three-pointed star more prominently on the smooth trunk lid. This is complemented by a chrome trim strip modeled with attention to detail. It runs horizontally across the trunk lid and continues past the tail lamps, creating visual width. The arrangement of the LEDs in two horizontal rows within the two-piece tail lamp looks high tech and at the same time is reminiscent of the relief-type design on earlier models.
The interior: dynamic flow of lines
Sculpted elegance and simplicity also characterizes the interior. The white instrument panel exudes sensual clarity. Its curved shape is reminiscent of a whale's fins just before it re-enters the water. Like the entire interior it is dominated by flowing lines: the upper and lower wave create a clear structure.
The architecture of the instrument panel is striking: Thanks to a new airbag packaging the designers were able to give the lower part of the instrument panel an extremely sculpted shape. The upper section of the instrument panel seems to float sensually in front of the dashboard as a so-called top layer. The instrument panel seamlessly transitions into the doors in a wrap-around design. The wavelike motion continues in the door panels.
The air vents, which among other places are housed as a four-piece cluster in the center of the instrument panel, have a futuristic and highly detailed design: fins that route the air stream surround an oval hole. The vents are designed to add contrasts and are made of a mix of white aluminum with a ceramic-like appearance and brushed and polished aluminum.
The aluminum control elements have a functional and clean design, and provide an exciting contrast to the organic and avant-garde shapes that surround them.
On top of the free-form surface under a reduced hood are the 12.3-inch screens familiar from the new S-Class. They have an aspect ratio of 8:3. In the Concept S-Class Coupé the fully glazed color displays are even slimmer and seem to float even more freely. As high-tech elements they offer an exciting contrast to the sensual landscape of the instrument panel. The color scheme of the displays is a bluish-green and consequently sporty and modern.
A touch screen showing four world clocks is located on the center console. The driver can choose which clocks to display: To do so, the driver first scrolls on a globe in the display and selects a time zone before a drop-down menu offers the corresponding city selections. The world clock concept was designed and implemented by designers and engineers at the Mercedes-Benz Advanced Design Center in Palo Alto, California.
The central command unit on the center console looks like a shiny jewel. Its extremely high-quality "black diamond" surface creates depth of field. The "black diamond" method uses the chemical CVD (chemical vapor deposition) gas phase process to deposit a precious metal on a high-sheen chrome surface at temperatures of 1,830°F. The metal reacts with the surface to form a layer that is highly scratch-resistant and has a high adhesive strength.
The door panels of the Concept S-Class Coupé are made from aluminum. Using computer algorithms delicate topographic lines were milled into the metal and mimic the contours of the door-mounted control elements. This creates an interesting light pattern with tiny sparkling highlights. For this creation the designers drew their inspiration from rock formations in Utah. The progressive perforations of the loudspeakers were also generated using algorithms and display some intelligent aesthetics of mathematics.
Like the entire interior the seats have a highly dynamic and natural "flow of lines" and continue the sculpted design of the shapes. The front seats evoke associations of haute-couture tailoring because their sculpted shape embodies sensual lines reminiscent of figurines in fashion design. In the upper section of the seat the side bolsters envelope the occupant. The vertical lines of the seats come courtesy of an array of delicate piping, which is continued formally by leather strips in the carpet. Piping on the side bolsters provides contrast and like the perforation of the seat surfaces is a factor in the sporty-elegant impression.
The choice of colors and materials plays with the extroverted contrasts of anthracite and white as well as aluminum, and bolsters both the timeless modernity and avant-garde nature of the design and the claim of the Concept S-Class Coupé of ultimate exclusivity, high quality and perfection. In this spirit the instrument panel and seats are made from supple calfskin, the silk carpet was made by hand using the tufting process and captivates with its precious iridescent sheen. In this process the threads are stitched through the backing. The headliner of the vehicle is made from hand-woven silk and consequently underscores the exclusive character of the interior.
The technology: intelligent assistance systems and a seeing suspension
The Concept S-Class Coupé is powered by a V8 Biturbo engine. This engine produces 449 hp from a displacement of 4,663 cc. The peak torque is 516 lb-ft.
The Concept S-Class Coupé is equipped with the "Intelligent Drive" technology from Mercedes-Benz. Thanks to two "camera eyes," the stereo camera can create a three-dimensional view of the area up to about 160 feet in front of the vehicle, and as "6DVision" can detect the position and movement of objects. It monitors the surroundings ahead of the vehicle over a range of up to 1,600 feet. This data is combined with the data from the radar and ultrasonic sensors. A multitude of assistance systems monitors the surrounding traffic for the driver. This helps to reduce the burden on the driver and other road users are also protected.
The suspension makes use of the new stereo camera as well: like the new S-Class, the Concept S-Class Coupé can detect surface undulations in advance. If ROAD SURFACE SCAN detects such undulations with the help of the stereo camera, MAGIC BODY CONTROL adjusts the suspension in advance to suit the situation. Using the camera images and vehicle status information, the control unit continuously calculates the best control strategy to cope with uneven stretches such as long undulations.
The infotainment system also meets the highest standards: the MoodGrid software from music recognition service Gracenote makes it possible to listen to whatever music fits the mood. Finding suitable songs no longer requires the driver and passengers of the Concept S-Class Coupé to awkwardly search through their collections of digital music. Based on a selected mood the software compiles a pre-selection of songs. This compilation not only includes familiar songs, but music from a catalogue containing 18 million tracks – adapted to the individual taste and the respective mood. The navigation system based on the Garmin NaviCore also offers more convenient orientation with a modern design and a 3D view.
Staff Writer - CheersandGears.com
September 10, 2013
Nissan has been on a tear lately with introducing new models. So far the company has unveiled the Altima, Pathfinder, Sentra, and Versa Note. Their latest showing at the 2013 Frankfurt Motor Show is the new 2014 Rogue. This is an important vehicle for Nissan as the Rogue is currently Nissan's second best selling model in the U.S.
The new Rogue's design is very Pathfinder-ish. Imagine taking the Pathfinder and sticking it in front of a shrink-ray, that's the 2014 Rogue's design in a nutshell. Inside, the Rogue gets the same dashboard layout as the new Altima and the option of a third-row seat.
Power will come 2.5L four-cylinder engine with 170 horsepower and 175 pound-feet of torque. This is mated to Xtronic CVT and comes with the choice of either front-wheel or all-wheel drive. Fuel economy wise, the official EPA numbers aren't out. Nissan does say that the Rogue with front-wheel drive can get 33 MPG on the highway.
Pricing for the 2014 Rogue will start at $22,490* for the base S model (*excluding $860 destination charge). That's an increase of $2,000 over the current Rogue. All-wheel drive will be an $1,350 option.
The 2014 Rogue will go on sale this fall. Nissan is doing a special reservation program where anyone who wants to buy the Rogue can reserve one and get a $250 gift card.
William Maley is a staff writer for Cheers & Gears. He can be reached at firstname.lastname@example.org you can follow him on twitter at @realmudmonster.
Press Release is on Page 2
All-New 2014 Nissan Rogue Designed to Energize Everyday Activities with Style – Thanks to Spacious Interior with Advanced Passenger and Cargo Flexibility, Optional 3rd Row
- Rogue is the fifth of five all-new redesigned models for the 2013 and 2014 model years – following Altima, Pathfinder, Sentra and Versa Note
- Second best-selling vehicle in Nissan‟s U.S. lineup is totally redesigned for 2014 with bold styling and optional 3-row/7-passenger seating
- New Rogue features premium right-sized exterior, roomy and inviting interior, easily configurable passenger/cargo space and features designed to enhance confident driving
- Extensive range of available technologies includes NissanConnectSM with Navigation, NissanConnectSM Apps, class-exclusive* Around View® Monitor with Moving Object Detection, Blind Spot Warning, Lane Departure Warning and Forward Collision Warning
First introduced for the 2008 model year, the Nissan Rogue has become a key player in the highly competitive compact SUV market – addressing both the functional and emotional needs of buyers while offering great value. Now, with a complete redesign for the 2014 model year, Rogue challenges convention once again with bold emotive styling, a premium interior created with comfort and multi-tasking in mind, and an array of available affordable techonologies.
For the first time Rogue offers optional 3-row/7-passenger seating, thanks to its improved interior packaging efficiency. Among the many interior highlights are the exceptional passenger and cargo flexibility with its innovative EZ Flex™ seating System. The new Rogue also offers an innovative, class-exclusive* Divide „n Hide® Cargo System that provides 18 adjustable variations (two-row models) between the cargo and occupant areas – including out-of-sight storage and a lower deck to handle taller items.
"Like every Nissan, Rogue is designed to energize owners‟ lives by not only meeting their expected needs, but by going beyond the norm with features such as the Around View Monitor® that helps make parking less stressful," said Fred Diaz, divisional vice president, Sales and Marketing, Nissan North America, Inc. "With Rogue, as we‟ve done with the all-new Altima, Pathfinder, Sentra and Versa Note before it, we‟re bringing a new level of affordable technologies and innovations to a segment looking for fresh ideas."
Now assembled in Smyrna, Tennessee, the 2014 Nissan Rogue is the first vehicle to utilize the new jointly developed Nissan/Renault Common Module Family (CMF) platform architecture. The added efficiencies provided by the joint development allow Nissan to deliver unprecedented value in the segment. Rogue is one of a family of new Nissan global compact crossovers, along with the European version, called the Nissan X-TRAIL. As high-volume global growth products, Rogue and X-TRAIL are projected to be available in 190 countries around the world.
Robust Exterior, Inviting Interior
The 2014 Rogue‟s completely redesigned exterior provides a premium, high-quality look and feel with no compromise of the functional aspects that are so important to owners in this class. Rogue offers a compact overall size and ample interior roominess, thanks to its long wheelbase and short front and rear overhangs. Versus the previous generation Rogue, the wheelbase has been increased by 0.6 inch, the overall height increased by 1.2 inches and the front overhang reduced by 1.5 inches. In addition, the rear doors have been designed with a wider opening (77 degrees) for easier entry and exit to the rear passenger space.
Rogue‟s bold, sharp bodylines offer a sporty and confident appearance, balancing its sleek style with an aggressive stance provided by large wheelwells and available 18-inch wheels and tires.
The coefficient of drag has been reduced by about 10 percent from the previous generation to a class-leading* 0.33 by optimizing the A-pillar section and outside mirror shapes, which also helps reduce wind noise. The turbulence behind the body has been reduced through optimization of the rear roof spoiler, rear side spoiler and rear combination lights. Underbody aerodynamic devices include a Nissan-first muffler spoiler, along with a rear bumper closing panel, fuel tank deflector, rear suspension cover, engine under cover and front tire deflectors.
Exterior highlights include standard halogen headlights with signature LED daytime running lights making a powerful visual statement. Also featured are body-color outside mirrors with standard integrated turn signals and a rear spoiler. Also available are LED headlights with auto levelizer, fog lights, privacy glass, roof rails, heated outside mirrors and power liftgate.
Rogue‟s available power panoramic moonroof offers a panoramic view through its extended length. The front glass panel slides and tilts, while the rear glass panel is fixed. When in the open position, the front panel slides under the fixed second panel.
Rogue is offered in eight exterior colors: Midnight Jade, Saharan Sun, Brilliant Silver, Gun Metallic, Super Black, Cayenne Red, Moonlight White and Graphite Blue.
"Rogue‟s bold, dynamic new styling is going to generate tremendous attention," said Pierre Loing, Vice President, Product and Advanced Planning and Strategy, Nissan Americas. "And once buyers take a look inside at the roomy, premium interior and experience the long list of affordable user-friendly technologies, we think they‟ll be delighted."
Rogue‟s comfortable, inviting interior offers a definite "wow" factor for occupants – unexpected roominess along with a marriage of refined styling and premium comfort. Among the factors that have improved roominess (versus the previous generation Rogue) are the optimized front headrest shape, lowered front seat shoulder height, forward-shifted center console location, reduced front seatback surfaces, reduced rear door speaker enclosure intrusion, lowered door trim height and the new sliding/reclining 2nd row seat design. As a result, Rogue features ample interior roominess and 70.0 cubic feet of cargo room (rear seats folded down).
The new Rogue‟s front bucket seats are a special "zero gravity"-inspired design. Similar to the Nissan Altima‟s front seats, the articulated seat shape provides continuous support from the pelvis to the chest, helping reduce fatigue over long periods behind the wheel.
The available Quick Comfort™ heated front seats are designed to immediately begin warming the body parts that are most sensitive to heat, such as the thighs and hips. Then, to maintain a warm, cozy feeling, the heater increases heating on body pressure points. The driver‟s seat is 6-way adjustable, with available power adjustment incuding lumbar support, while the front passenger seat is 4-way adjustable.
With Rogue‟s innovative EZ Flex™ Seating System, every seat except the driver‟s easily folds down. The front passenger seat folds rearwards, allowing transport of long items such as an 8-foot ladder when combined with the flat folding 40/20/40-split 2nd row seat. The optional stadium-style, flat-fold 3rd row 50/50-split bench seat enhances Rogue‟s outstanding passenger versatility. Rogue offers 37.9 inches of 2nd row legroom with its 9.0 inches of fore/aft adjustability.
The new Rogue interior design also offers a range of smart storage and convenience solutions, with six front storage areas (five within the driver‟s reach), two front cupholders and two front bottle holders.
Other standard interior features include Fine Vision electroluminescent gauges, front center console, power windows with driver‟s auto up/down, 5.0-inch center meter color display (Advanced Driver Assist™ Display), air conditioning with microfilter and class-exclusive* adjustable 2nd row vents, 4-speaker AM/FM/CD audio system with auxiliary audio input jack, power door locks with auto-locking feature, LED maplights, USB connection port for iPod® interface and other compatible devices, Bluetooth® Hands-free Phone System, RearView Monitor, Streaming Audio via Bluetooth® and Hands-free Text Messaging Assistant.
Also available are dual-zone automatic air conditioning, leather-appointed seats, Bose® audio system with nine speakers. Two interior colors are offered: Charcoal and Almond.
Available Rogue connected technology and smartphone integration includes the advanced NissanConnectSM with Navigation system with 7.0-inch color touch-screen display, Nissan Voice Recognition for navigation and audio, NavTraffic and NavWeather, SiriusXM Travel Link® (SiriusXM subscription required, sold separately), and NissanConnectSM Apps.
"Rogue‟s smartphone integration system allows drivers to seamlessly connect their digital life to their in-vehicle experience. With the Hands-free Text Messaging Assistant they can receive incoming messages from smartphones, and with Streaming Audio via Bluetooth® anyone can DJ from anywhere in the Rogue," added Loing.
Confidence-Inspiring Driving Technologies
Rogue‟s available class-exclusive* Around View® Monitor (AVM) with Moving Object Detection (MOD) system utilizes four small superwide-angle cameras mounted on the front, side and rear of the vehicle to provide a "bird‟s eye" virtual 360° view of objects around the vehicle. It provides additional selectable split-screen close-ups of the front, rear and curb views, helping the driver maneuver the car in or out of tight spots.
Moving Object Detection builds on the capabilities of the AVM system, helping enhance the driver‟s situational awareness by providing visual and audible warnings (front, side or back range object detection) if the system detects moving objects (such as another vehicle) within the displayed image in situations such as when pulling out of a parking space. Using sophisticated image processing technology, the system detects moving objects within the "top view" (when the vehicle is in Park). When starting off or backing up, it detects moving objects crossing within the front or rear views.
Other Rogue Safety Shield technologies include Blind Spot Warning (BSW), Lane Departure Warning (LDW) and Forward Collision Warning (FCW).
Every 2014 Nissan Rogue is equipped with a responsive 2.5-liter 4-cylinder engine rated at 170 horsepower and best-in-class* 175 lb-ft of torque. The engine is matched with an advanced next-generation Xtronic CVT® (Continuously Variable Transmission) with standard Sport Mode switch. With a 40 percent reduction (versus previous generation) in friction loss, along with an improved belt and pulley system, reduced oil churning friction, compact oil pump, new electronic control, wider gear ratio and other enhancements, the new CVT is approximately 10 percent more efficient than the previous-generation CVT.
Fuel economy is projected to be best-in-class* 33 mpg highway for front-wheel drive CVT-equipped models (2014 EPA ratings not available at press time) – representing an 18 percent improvement in highway fuel economy versus the 2013 model. Rogue city fuel economy is rated at 26 mpg, while combined fuel economy is 28 mpg (front-wheel drive models)*.
The new Rogue carries the distinctive "PURE DRIVE" badge, reflecting Nissan‟s commitment to developing more environmentally friendly transportation for every market.
The new Rogue also features Nissan‟s new suite of confidence-inspiring dynamic technologies with Active Trace Control, Active Engine Braking and Active Ride Control. The Active Trace Control system utilizes Rogue‟s standard Vehicle Dynamic Control (VDC) system to help improve cornering feel by automatically applying the brakes or smoothing engine torque characteristics while accelerating.
With Active Engine Braking, the CVT helps slow the Rogue as the driver brakes, resulting in less brake effort by the driver. Active Ride Control helps smooth out the drive by automatically applying the brakes and adjusting engine torque after the vehicle hits a bump, reducing the typical "head bobble" pitch.
The 2014 Rogue also offers standard 4-wheel independent suspension, Electric Power-assisted Steering, 4-wheel disc brakes with Anti-lock Braking System and Vehicle Dynamic Control (VDC) with Traction Control System (TCS) and Hill Start Assist. Rogue is available with a choice of front-wheel drive or an intuitive All-Wheel Drive system with standard Hill Descent Control.
Rogue S models are equipped with 17-inch wheels and 225/65R17 all-season tires, while 17-inch aluminum-alloy wheels are standard on Rogue SV. Also available are 18-inch aluminum-alloy wheels with 225/60R18 all-season tires on Rogue SL models.
Safety and security features include the Nissan Advanced Air Bag System (AABS) with dual-stage supplemental front air bags with seat belt and occupant classification sensors; front seat-mounted side impact supplemental air bags; roof-mounted curtain side impact supplemental air bags with rollover sensor for front and rear-seat outboard occupant head protection; 3-point front and rear seatbelts, front seat belts with pre-tensioners and load limiters and adjustable upper anchors; and LATCH System (Lower Anchors and Tethers for CHildren).
Every Rogue also offers child safety rear door locks; Zone Body construction featuring front and rear crumple zones and occupant zone; Nissan Immobilizer system and anti-theft alarm system; and Tire Pressure Monitoring System (TPMS) with position monitoring and Nissan‟s innovative, class-exclusive* Easy Fill Tire Alert.
Three Well-Equipped Models
The 2014 Nissan Rogue comes in three well-equipped models, S, SV and SL, each in a choice of front-wheel or all-wheel drive. Along with the long list of standard features found on Rogue S, the Rogue SV adds 17-inch aluminum-alloy wheels, dual-zone automatic climate control, privacy glass, Nissan Intelligent Key™ with Push Button Ignition, 6-way power driver‟s seat, power driver‟s seat lumbar support, SiriusXM Satellite Radio (SiriusXM subscription required, sold separately), NissanConnectSM Apps, two additional audio system speakers, roof rails and Smart Auto on/off headlights.
Rogue SL models include leather-appointed seating, Bose® audio system with nine speakers, NissanConnectSM with Navigation, 7.0-inch QVGA color touchscreen display, power liftgate, Around View® Monitor, 18-inch aluminum-alloy wheels, fog lights, Quick Comfort™ heated front seats and outside mirrors and leather-wrapped steering wheel and shift knob.
Available option packages include the Family Package (S, SV) with 3rd row seating, privacy glass (S only) and run flat tires; the Moonroof Package (SV) with power panoramic moonroof; the Premium Package (SV) with NissanConnectSM with Navigation, Around View® Monitor, Blind Spot Warning, Lane Departure Warning, Moving Object Detection and power liftgate; and the Premium Package (SL) with power panoramic moonroof, LED headlights with auto levelizer, Blind Spot Warning, Lane Departure Warning, Moving Object Detection and Forward Collision Warning.
The 2014 Nissan Rogue will be assembled in Smyrna, Tennessee.
*AutoPacific Segmentation. 2014 Rogue v. '13 and '14 competitors, Midsize Compact Class.
**Targeted 2014 Rogue EPA Fuel Economy Estimate of 33 MPG. Nissan Testing results not yet EPA confirmed.
Staff Writer - CheersandGears.com
September 10, 2013
Audi has revealed the 2015 A3 Cabriolet before its official debut at the Frankfurt Motor Show this week. The A3 Cabriolet is Audi's entry-level convertible and becomes the forth member of the A3 family.
Using the A3 sedan and not the hatchback as a base, the A3 Cabriolet carries many of the design cues found on modern Audis and is a bit bigger in most dimensions, aside from height. Audi decided not to go with a hardtop and stick with a fabric top. This allows the A3 Cabriolet to raise and lower its roof within eighteen seconds.
Powering the A3 Cabriolet are 1.4L TFSI four-cylinder with 140 horsepower, 2.0L TDI four-cylinder with 150 horsepower, and a 1.8 TFSI four-cylinder with 180 horsepower. New for this model is the introduction of an S3 Cabriolet which bring forth a 2.0L turbocharged four-cylinder with 300 horsepower and quattro all-wheel drive.
The A3 Cabriolet will go on sale some next year in Europe. No word if the A3 Cabriolet will come to America.
William Maley is a staff writer for Cheers & Gears. He can be reached at email@example.com you can follow him on twitter at @realmudmonster.
Press Release is on Page 2
ALL-NEW CABRIOLET TOPS OFF AUDI A3 RANGE IN FRANKFURT
Sleek new compact class soft-top adds easily accessible wind-in-hair driving pleasure to all-new A3's long list of attributes
- World debut at 2013 Frankfurt Motor Show (September 12-22), UK ordering from late October, first UK deliveries in March 2014
- Fourth model in all-new A3 range
- Automatic fabric roof opens and closes hydraulically in less than 18 seconds and is fully concealed from view when retracted
- Three engines at launch – 1.4 TFSI 140PS with cylinder-on-demand, 1.8 TFSI 180PS, 2.0 TDI 150PS
- First ever quattro-equipped Cabriolet models, and first ever S3 quattro Cabriolet, to follow
- High-end equipment and advanced options including Audi connect with 4G/LTE high-speed internet connectivity
Drawing inspiration from the new Audi A3 Saloon with its flowing lines and finely balanced proportions, the all-new A3 Cabriolet makes its world public debut at the 2013 Frankfurt Motor Show. The compact class open-top will become available for UK ordering in late October, and will reach its first customers here in March 2014.
To achieve its sleeker profile and provide the capacity for complete soft-top concealment when in open mode, the new compact class cabriolet has grown compared to the previous model: its length has increased from 4.24 to 4.42 metres, its wheelbase from 2.58 to 2.60 metres and its width from 1.77 to 1.79 metres. Only its height (1.41 metres) is down on its predecessor, by 15 millimetres. Luggage capacity has also grown by 60 litres (2.12 cubic ft), and access to that space has been improved.
The front of the Audi A3 Cabriolet is characterised by the single frame radiator grille, which is flanked by flat headlamps that can light the way using either halogen or xenon bulbs depending on version, or using optional LED headlamp technology.
The rear overhang plays a key role in the harmonious proportions of the two-door car. The windscreen frame is made of aluminium – and an aluminum-look trim strip runs around the roof aperture. On the flanks, the design features a taut tornado line and contoured surfaces that take full advantage of light and shadow.
The soft top
The new A3 Cabriolet has a soft fabric roof that is stretched over a lightweight kinematic mechanism made of magnesium-steel, and it complements the car's design perfectly. At the press of a button, the top opens or closes electro-hydraulically in less than 18 seconds at speeds of up to 31mph. When retracted, the top – folded into three layers – rests in a tray that barely affects luggage capacity, which is 287 litres (10.14 cubic ft).
The acoustic soft top has a glass rear window and is available in black, grey and brown - its roof liner can be specified in black or lunar silver. The fully automatic acoustic hood has a thicker inner foam layer which further reduces the already low interior noise level of the A3 Cabriolet. A wind deflector and head-level heating for the front seats will be available from the options list. An active rollover protection system consisting of two spring-loaded plates that are recessed into the body protects the occupants in case of a rollover accident.
The new Audi A3 Cabriolet is around 50 kilograms lighter than the previous model despite its larger size and improved comfort – the kerb weight of the entry-level version is just 1,365 kilograms. Even taking into account its special reinforcements, which deliver high torsional rigidity, the body-in-white with its aluminium bonnet weighs 30 kilograms less than previously. Weight was also significantly reduced in the interior and in the engines, contributing to best-in-class figures which bear testament to the Vorsprung durch Technik brand's intensity of focus on lightweight construction principles.
Elegant lines, clean surfaces and typically uncompromising quality also mark out the interior design of the new Audi A3 Cabriolet. The instrument panel is lean and low, with a gently curved frontal section and a centre console angled slightly towards the driver. The large, round air vents with their 'jet design', the electrically retractable 5.8-inch colour monitor complemented by the Driver's Information System with efficiency and rest recommendation assistants, the control panel for the air conditioning system and the three-dimensional trim strips help to maximise the air of premium class sophistication. So, too, do features such as the optional lighting package which for the first time includes a touch-sensitive switch for the reading lights.
The cabin offers enough space for four adults, and the seatbacks of the two rear seats can be folded down to create a wide through-load area. The steering wheel and seats are new designs, and the new electro-mechanical parking brake is operated by a button on the centre console. Depending on which of the three trim levels – SE, Sport and S line – is chosen by UK customers, the seats are finished in either cloth or a combination of cloth and leather, with full leather and an Alcantara/leather mix available on the options list.
Highly developed optional assistance systems can also be specified to make day-to-day life in the A3 Cabriolet even more relaxed. They include adaptive cruise control, Audi side assist, Audi active lane assist, camera-based traffic sign/speed limit recognition, park assist with selective display and various feature levels of the Audi pre sense safety system.
Also extremely attractive is the line-up of infotainment components, which is headed by the Bang & Olufsen sound system and MMI Navigation plus. The latter combines an ultra-slim seven-inch monitor with a user terminal incorporating a rotary/push button control that is designed as a touchwheel to accommodate the MMI touch function – the touchwheel's top surface is a touch-sensitive pad for inputting alpha and numeric characters.
To build on this, customers can also specify the Audi connect option, which allows occupants to more fully exploit the A3's highly advanced computing potential by connecting it to the Internet, whenever possible via the fast 4G/LTE transmission standard (available from November). The integrated WLAN hotspot enables passengers to use their mobile devices to surf and e-mail freely, and by going online the car can also offer everything from navigation with Google Earth images and Google Street View to online traffic information and tailored social media access. The most recent addition to the lengthy list of valuable Audi connect features is a parking information function, which shows available parking spaces in public car parks.
Three newly developed engines will be offered in the Audi A3 Cabriolet at its launch, all placing the emphasis as much on performance as on efficiency. The two TFSI engines produce 140PS and 180PS from 1.4 and 1.8 litres of engine displacement, respectively, while the 2.0 TDI develops 150PS; other engines will follow – ranging from the 1.6 TDI with 110PS to the 2.0 TFSI, which will power the Audi S3 Cabriolet with 300PS. All engines in the new Audi A3 Cabriolet employ direct injection and turbocharging and are backed up by a start-stop-system.
On average, the three launch engines bring a fuel economy improvement of around 12 per cent compared with their closest equivalents in the previous A3 Cabriolet range, despite also making performance gains. The 1.4 TFSI with six-speed manual transmission, for example, powers the new car from 0 to 62mph in 9.1 seconds, yet also achieves a very healthy 56.5 mpg with CO2 emissions of 114 g/km. Also contributing to this efficiency is Audi cylinder on demand (COD) technology, which deactivates two of the engine's cylinders in low load conditions.
The 1.8-litre TFSI is also a state-of-the art unit with an extensive package of high-end technologies, including dual injection into the combustion chambers and induction manifold. It is initially linked exclusively to a seven-speed S tronic twin-clutch transmission, and where the Audi drive select vehicle dynamics system is fitted, it offers a free-wheeling function that further improves fuel economy. According to the combined cycle test it is capable of returning up to 48.7 mpg with CO2 emissions of 133g/km.
Not surprisingly the manual transmission-equipped 2.0 TDI with 150PS remains the economy champion in the first phase of engines, offering combined fuel consumption of 67.3 mpg and CO2 emissions of 110g/km.
The chassis of the new Audi A3 Cabriolet takes the much praised set-up employed by the rest of the A3 range as its technical basis. The MacPherson strut front and four-link rear setup includes lightweight aluminium elements, and the multi-link rear configuration is able to handle longitudinal and transverse forces separately. As with all other A3 models, Cabriolet models will offer a no-cost choice between comfort-oriented standard suspension and tauter sports suspension lowered by 15mm. S line versions will offer three choices – standard suspension, sports suspension and even more focused S line sports suspension lowered by a further 10mm over the sports set-up.
The power steering system features an efficient electromechanical drive, and to ensure that handling remains assured and safe but also adjustable right to the cornering limits the ESC stabilisation control system integrates an electronic limited slip differential. In support of this, powerful and durable brakes sit behind wheels ranging in size from 16 to 19 inches.
To tailor the A3 Cabriolet driving experience more completely to the preferences of the driver, the Audi drive select vehicle dynamics system will also be offered. It features a choice of modes governing the operating characteristics of the engine management, power steering, S tronic transmission and air conditioning. This control also extends to optional systems such as the adaptive suspension control system Audi magnetic ride, adaptive cruise control, adaptive light and progressive steering whose steering gear ratio becomes increasingly more direct when turning.
The Audi S3 Cabriolet (preliminary data)
The first ever S3 Cabriolet will follow shortly after the initial launch. Its 2.0 TFSI engine will deliver 300PS and transfer 380 Nm (280.27 lb-ft) of torque to the crankshaft. Equipped as standard with the six-speed S tronic transmission, it will be capable of completing the sprint from 0 to 62mph in 5.4 seconds, yet will also offer the potential to cover up to 39.8mpg.
The strikingly styled body with its trademark S quattro styling elements will sit 25mm lower than the standard car on S specific sports suspension, which will be complemented by quattro all-wheel-drive via an electronically-controlled hydraulic multi-plate coupling, and by the new progressive steering system with its more direct and progressive response.
Exactly.. That doesn't mean large cars are failures just because it doesn't fit YOU the way you'd like. They're still large and roomy vehicles. You're an exception to the rule when it comes to fitting people into vehicles. Fortunately, you can afford the vehicles that you and your family can fit comfortably in..because those you listed are all pretty dang pricey and they've also come a long way since being just trucks without a bed.
Do you ever wake up in the morning with Numbness or tingly fingers? If so that is carpal tunnel early stages, get a hand brace to sleep in. Did wonders for my left hand, but the right being dominate had to be fixed with surgery.
Only Escalade ESV, Yukon XL or Suburban for GM or Ford Expedition Max or Lincoln Navigator L than. No cars really will fit as I have tried the CT6 and that fails once I have the front seat set for me, I cannot sit behind the front seat than and pretty much no one else can either. Todays Full Size cars are NOT the past full size cars.
Yeah, I did that with my username a year or so ago, got tired of Cubical and Moltar. Rob or Robert, never, ever Bob.
Hope your hand heals well. I'm wondering if I'm developing arthritis...after a day of computing, my right middle finger (and only that finger) gets very painful. Not sure if it's from typing or mousing, though I tend to use the Mac trackpad more than the mouse (that is mostly thumb movements).
Yes, decided I would be transparent on my actual name.
Grew up in a group of 7 David's, 3 went by Dave, very soft spoken, introverts, but nice guys. The other 4 of us are clearly extroverts and much louder and aggressive. We still get together every so often and hang out talking about the past. Very interesting paths we all have taken.
David is me! Like you, figure it was time to just go with my name than anything else Robert.
Hope your having a good week. I am, work is going well, as I poke poke poke with my left hand.