Jump to content
Create New...
  • David
    David

    Leclanché Releases Fire-Resistant Next Generation Lithium-ion Cells

      Lithium-ion battery cell with no impact on performance achieves almost 80% reduction of risk of fire goes to production for EV use.

    Leclanché Energy Storage Solutions of Switzerland has achieved a significant breakthrough in the safety of performance Lithium-ion batteries for use in EVs.

    Leclanché has taken current Lithium-ion cell production to the next step by adding a special fire-retardant additive to its electrolyte formula composition lowering the risk of thermal events by close to 80%.

    Snag_73515e08.png

    Verified by independent nail penetration tests has confirmed the companies claims of significantly lowering risk of thermal events with fire. The non-flammable electrolyte additive provides enhanced cell safety option for rail, truck, bus and auto EV markets. Intertek Germany, renowned third-party testing lab conducted a series of industry standard nail penetration tests on Leclanché  60 Ah cells. During this test with the cells punctured and the resulting internal short circuit, these cells exhibited a far lower risk of fire than the same cells without the fire-retardant additives.

    Risk of fire to passengers onboard and expensive lithium-ion battery recalls causing disruptions, world leading energy storage solutions company Leclanché is leading the global markets in reducing these risks that auto makers have to take on to build and sell EV solutions.

    To quote Leclanché:

    “While the entire battery industry continues to place considerable R&D resources into the development of solid-state batteries, there’s a critical need to enhance the safety of today’s high energy density lithium-ion cell technology. Most efforts, until now, adversely impact the performance or longevity of cells. Leclanché has been able to develop a high performance and high energy density lithium-ion cell exhibiting high safety characteristics without any negative impact on performance or longevity. As technological advancements continue to be developed, this is a crucial improvement in state of the art cell technology, that does not require breakthrough technology that could still be several years away from commercial availability” said Pierre Blanc, chief technology officer, Leclanché.

    Leclanché Willstatt Germany production facility that has built Lithium-ion cells based on their water-based process for the last 10 years will be the site for production of these new fire-resistant cells with availability starting Q1 2023 to OEMs.

    Quote: 

    According to Anil Srivastava, CEO, Leclanché, Our breakthrough should encourage manufacturers waiting on the side-lines for next generation solid-state batteries to move forward with their advanced fleet vehicle designs today – safe lithium-ion batteries have arrived and Leclanché has them.”


    User Feedback

    Recommended Comments

    There are no comments to display.



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive
  • Posts

    • I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • Either a co-pilot first time landing or something truly went wrong on the plane.
    • The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.
  • Who's Online (See full list)

    • There are no registered users currently online
  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings