Jump to content
Create New...
  • William Maley
    William Maley

    Bentley CEO Talks About Upcoming EV, Admits They're Losing Some Customers to Porsche and Tesla

      Its going to be some time before it arrives

    It is no secret that Bentley is working on an electric vehicle. What has been unclear is when said vehicle is expected to launch. Recently, Automotive News Europe had a sit-down with Bentley CEO Adrian Hallmark where he revealed that electric cars are seen "as another growth opportunity in a five- to 10-year period." Why the long period?

    "The problem is, with the size of our vehicles and the frontal area we push through, current battery-power density limits the size of the car with a credible driving range. The Jaguar I-Pace is the perfect-size car for the battery technology, but it’s too small for us. It’s all driven by power density of the battery, but there’s nothing industrialized in the supply chain before 2023-2024-2025. Only then does it open up the size of the vehicle and the category you can make a credible battery-powered car," said Hallmark.

    Hallmark wouldn't say what Bentley's full-electric vehicle would look like, but past rumors point to the possibility of the Mulsanne replacement of going full EV.

    Bentley knows that it needs an EV sooner or later. Hallmark said 40 percent of Bentley customers would consider buying an electric vehicle. Also, a set of possible Bentley customers, "the upper liberals and the post-moderns" are trending towards Porsche and Tesla models.

    Source: Automotive News Europe (Subscription Required)

    User Feedback

    Recommended Comments

    Bentley is BLAH style, Old Europe Old Thinking, OLD OLD OLD, Why buy a Bentley when you can have so many far better options including EVs.

    Bentley needs to revolutionize themselves or die off to the history books.

    • Disagree 1
    Link to comment
    Share on other sites

    Funny that they are saying how hard it for them to do an EV, considering their corporate siblings Audi and Porsche are just about there.  Just take the eTron GT or Taycan, put on some squared bodywork, mesh grille, quilted seats and lots of wood, and instant Bentley EV.   Seems inefficient that each brand within VWAG would be developing their own EV technology and platforms, seems like the dirty bits would be shared across the brands, as they do now with ICE platforms and powertrains.

    Edited by Robert Hall
    • Agree 2
    Link to comment
    Share on other sites

    Since Bentley and Porsche have the same owner, I don't see why they really care who buys what, unless the profit margin on a Bentley EV is higher than a Porsche EV.  

    I know Bentley's are big, but a Tesla Model S isn't a small car, and Mercedes is making near S-class sized EV, so how can they do it and Bentley can't make the same thing with an extra 6 inches of wheelbase and length?  And you probably don't need over 250 miles of range either, Bentley owners have a private plane for when they travel over 100 miles.

    Link to comment
    Share on other sites

    5 hours ago, dfelt said:

    Bentley is BLAH style, Old Europe Old Thinking, OLD OLD OLD, Why buy a Bentley when you can have so many far better options including EVs.

    Bentley needs to revolutionize themselves or die off to the history books.

    Maybe Bentley is right given current battery power density.  In a decade or so, denser batteries will allow them (and all automakers) to build BEVs that are far superior to what is on the market now.  Sometimes it is bets to wait for technology to catch up with your ambitions if you are not able to push it along yourself.

    • Agree 1
    Link to comment
    Share on other sites

    7 minutes ago, loki said:

    do you say that of opinion or because of the infrastructure?

    Both really.  The I.D. Buzz Cargo is cute but what good is it if you set off on a spontaneous road trip?  Your life is regimented with electrics.

    Link to comment
    Share on other sites

    2 hours ago, ocnblu said:

    Both really.  The I.D. Buzz Cargo is cute but what good is it if you set off on a spontaneous road trip?  Your life is regimented with electrics.

    Same way ICE auto's were regimented for the first 1/3rd of their existence and in some 3rd world places still is.

    Link to comment
    Share on other sites

    8 hours ago, dfelt said:

    Same way ICE auto's were regimented for the first 1/3rd of their existence and in some 3rd world places still is.

    If that is true, why would anyone want to go back to that?  Ludicrous.  We have it perfect now.

    Link to comment
    Share on other sites

    11 hours ago, ocnblu said:

    If that is true, why would anyone want to go back to that?  Ludicrous.  We have it perfect now.

    Nothing is perfect. Never will be, if it was then god would exist as everything would be perfect, but it is not.

    Link to comment
    Share on other sites

    21 hours ago, dfelt said:

    Same way ICE auto's were regimented for the first 1/3rd of their existence...

    Overstated; 120 years, give or take, puts "1/3rd" at the year 1938.
    The primary restriction was roads, not fueling.

    • Thanks 1
    Link to comment
    Share on other sites

    I always feel that when Bentley or Rolls talk about weight, it's usually about something that isn't heavy enough.

     

    Battery density...they just want to biggest and largest batteries to be as heavy as possible too. By having the largest density possible, pack on the lard!

    Link to comment
    Share on other sites

    Daimler and Tesla are making electric semi trucks.  I bet those weigh more than a Bentley and they figured it out.  If they can make an electric Audi I don’t see why they can’t do a Bentley version, most of the Bentley’s sold anyway are glorified A8’s.

    Link to comment
    Share on other sites

    1 hour ago, smk4565 said:

    Daimler and Tesla are making electric semi trucks.  ...they figured it out.

    Where? Where are they for sale- I have money waiting right now!
    What? Oh, they only said they intend to build them, at some point. Well, that's disappointing.

    Know what else is disappointing? Tesla has been building EVs for a decade, and MB is JUST supposedly getting ready to bring out theirs. After [Benz] invented the [Benz tiller-steered tricycle], I would've expected more leading edge stuff.

    Edited by balthazar
    Link to comment
    Share on other sites

    1 hour ago, dfelt said:

    Hope Koch Brothers die an ugly death soon. They are spending millions to attack the lovely EV industry.

    https://www.huffingtonpost.com/entry/koch-electric-vehicles_us_56c4d63ce4b0b40245c8cbf6

    Death to these pigs!

    Whoa- advocating death for a difference of opinion is a bit unhinged. Not sure you want to come off as a wing-nut, Dave.
     

    Quote

    Electric vehicles make up just 1 percent of the U.S. market, but some analysts see them rising to as much as 5 percent by 2025.

    WHOA. We've all read other predictions (not necessarily from industry analysts) that EVs would gobble up 50% of the market by 2030. But who has been saying EVs won't see 25% by 2050?

    And actually; 2018 sales will be at 2.0%- the article has the figure wrong. Huffpost tends to garble their facts on a regular basis. But it still took 20 years to get to just a wee 2%.

    Edited by balthazar
    • Thanks 1
    • Haha 1
    Link to comment
    Share on other sites

    8 hours ago, balthazar said:

    Whoa- advocating death for a difference of opinion is a bit unhinged. Not sure you want to come off as a wing-nut, Dave.

     

    It's a bit more than 'difference of opinion'...the Kochs and other climate change denying right wing filth represent an existential threat to all of humanity.   They are anti-future and anti-American. 

    Edited by Robert Hall
    • Agree 1
    • Disagree 1
    Link to comment
    Share on other sites

    On 12/21/2018 at 11:45 AM, Robert Hall said:

    Funny that they are saying how hard it for them to do an EV, considering their corporate siblings Audi and Porsche are just about there.  Just take the eTron GT or Taycan, put on some squared bodywork, mesh grille, quilted seats and lots of wood, and instant Bentley EV.   Seems inefficient that each brand within VWAG would be developing their own EV technology and platforms, seems like the dirty bits would be shared across the brands, as they do now with ICE platforms and powertrains.

    Did you read the article? " "The problem is, with the size of our vehicles and the frontal area we push through, current battery-power density limits the size of the car with a credible driving range. "

    The squared bodywork really screws up range. As we all have noticed, all EVs all wear very slippery bodywork. 

    10 hours ago, smk4565 said:

    Daimler and Tesla are making electric semi trucks.  I bet those weigh more than a Bentley and they figured it out.  If they can make an electric Audi I don’t see why they can’t do a Bentley version, most of the Bentley’s sold anyway are glorified A8’s.

    Uhhh.. vehicles that size can cram a crap ton of batteries of any size in them. We're talking the footprint of "most" vehicles with a Bentley in a vehicle not aerodynamically the most slippery. 

    Also, Cummins is working on/has an electric Semi truck.

    Link to comment
    Share on other sites

    13 minutes ago, ccap41 said:

    Did you read the article? " "The problem is, with the size of our vehicles and the frontal area we push through, current battery-power density limits the size of the car with a credible driving range. "

    The squared bodywork really screws up range. As we all have noticed, all EVs all wear very slippery bodywork.  e

    Maybe they should adopt a more aerodynamic design instead of the blocky bloated look...

    Edited by Robert Hall
    • Like 1
    • Disagree 1
    Link to comment
    Share on other sites

    Ideally, an EV powertrain should be an option on a regular production vehicle. IE; engineer a model/body to fit over either- the GM skateboard concept seems to make the most sense. The ROI of 1. a true EV vehicle coupled with 2. a unique design inside & out is putting these vehicles automatically in the red going out the door.
    I see no reason that the -say- honda accord isn't available with the clarity's EV powertrain with 90% of the same look.

    • Like 2
    Link to comment
    Share on other sites

    1 hour ago, balthazar said:

    Ideally, an EV powertrain should be an option on a regular production vehicle. IE; engineer a model/body to fit over either- the GM skateboard concept seems to make the most sense. The ROI of 1. a true EV vehicle coupled with 2. a unique design inside & out is putting these vehicles automatically in the red going out the door.
    I see no reason that the -say- honda accord isn't available with the clarity's EV powertrain with 90% of the same look.

    Still would make up a minuscule portion of sales and therefore lose money, but at least the red ink would not be so deep for bespoke design development.

    Link to comment
    Share on other sites

    ^ Right? OEMs are killing their bottom line with unique EV models. It's a powertrain; ideologically just like a 4-cyl or V6 (I realize the packaging is totally different). The first OEM to develop the unilateral body architecture, they're going to have a real leg up on the competition, balance sheet wise.

    • Like 2
    Link to comment
    Share on other sites

    15 minutes ago, balthazar said:

    ^ Right? OEMs are killing their bottom line with unique EV models. It's a powertrain; ideologically just like a 4-cyl or V6 (I realize the packaging is totally different). The first OEM to develop the unilateral body architecture, they're going to have a real leg up on the competition, balance sheet wise.

    Totally agree, from an engineering standpoint, I see no reason to not have a skateboard concept that could also still handing 4 and 6 cylinder motors.

    As a global platform, that would allow a large array of power train options for various market needs around the world and would pay for itself.

    Link to comment
    Share on other sites



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive
  • Similar Content

  • Posts

    • I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • Either a co-pilot first time landing or something truly went wrong on the plane.
    • The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.
  • Who's Online (See full list)

    • There are no registered users currently online
  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings