Jump to content
Create New...
  • William Maley
    William Maley

    Rumorpile: Buick Is Showing A Coupe Concept For Detroit

      Buick Has A Surprise In the Wings For Tomorrow, We Have A Possible Guess As To What

    Before the Detroit Auto Show kicks off Monday, a few automakers will have events around Detroit. Buick will be one of those as they'll be showing off the new Envision crossover. But there is something else waiting in the wings. This week, The Detroit News learned that Buick will have a big premiere at the event. Officials at Buick were keeping their lips shut as to what this may be.

     

    “We have a very special program, and we had a surprise last year, so we’ll see if we can do something this year as well,” Duncan Aldred, U.S. vice president of Buick.

     

    However, Bloomberg may have learned what the surprise is. A source says the other vehicle will be a sporty coupe concept that is about the same size as the Chevrolet Camaro. No other details such as a name were revealed.

     

    You may remember Buick doing this same thing last year where they introduced the Cascada convertible and Avenir concept at an event before the show.

     

    We'll be at Buick's event tomorrow and get all of the details on both the Envision and the concept. In the meantime, you can follow all 2016 Detroit Auto Show news here.

     

    Source: The Detroit News, Bloomberg


    User Feedback

    Recommended Comments

    Well not sure it is an Alpha. A Lacrosse based Coupe would be a similar size.

    I would wager it is either a Buick version of Monza in Coupe form or possibly a Buick version of the GT?

    Just do not expect a GN as that would not fit the market. I would expect more of a A5 or A4 AWD coupe.

    Remember this car may represent a possible Buick but also Opel, Vauxhall and Holden.

    Link to comment
    Share on other sites

    Makes sense for it to be an Alpha, but I agree that it would be a bit optimistic to hope for a GN.

    I would actually like to see something more along the lines of a 3/4 scale Regal if it is an Alpha car.

    Link to comment
    Share on other sites

    Makes sense for it to be an Alpha, but I agree that it would be a bit optimistic to hope for a GN.

    I would actually like to see something more along the lines of a 3/4 scale Regal if it is an Alpha car.

     

    Possibly named Skylark, maybe Wildcat?

    Link to comment
    Share on other sites

    I think there is room in the market for a "personal luxury coupe" as the old saying goes.  There are mature buyers out there that don't want a Camaro or Mustang, or don't want the noisy exhaust note and stiff suspension of an Infiniti G37/Q60.  There isn't a mid-size coupe on the market right now that is geared toward refinement and luxury, unless you pay $60k for an E-class coupe.  I think a $35,000 Riviera hits a sweet spot for those that want something nicer than the CamCord segment, but don't want a crossover or a big car like an Avalon, Cadenza or Impala.

    Link to comment
    Share on other sites

    (I'M IGNORING THE BIG "SIZED" as Camaro and letting my imagination run wild)

     

    I think it might be a crossover coupe concept... I mean those count as coupes nowadays no?

     

    And then the production version will be a stylized crossover. Perhaps next gen Enclave. Perhaps.

    Link to comment
    Share on other sites

    When the release says "Camaro-sized" of course my brain takes that as a clue that the car will be Alpha-based.  I am ready to be bowled over by Buick's concepts two yerrs in a row... Avenir rocked the house!

    Link to comment
    Share on other sites

    Well here are things to ponder.

    #1 Buick is a global division. You know Opel, Holden and Vauxhall.

    #2 two of these divisions are RHD. Guess what the Alpha does not support RHD.

    #3 The new D2XX is very flexible and can support a coupe and could support AWD.

    Look for a Buick like coupe based on the Monza we saw from Opel.

    There is no GN as you know it. While it could be names that the concept of the original is too dated today. The car was based on a NASCAR stock car in the Grand National Series. Well Buick is not in NASCAR and NASCAR changed the name on the Grand National Series do it is way out of date.

    Buick is trying to change minds today of just who and what they are. To do that they need a new name and this car will be a car that will go, turn and stop unlike the GN that just has go.

    While we enthusiast all look back with fond memories on the GN you have to consider many look back and just see a car like their grandfathers Regal in black. Also if stock it is not as fast as some 4 cylinder cars today.

    The GN was a legend and time to leave it as that. I would on and create a coupe much like a Audi A5 with a Turbo engine and call it something new or if you were going to use an old name use Riviera.

    Finally this is not a production car as of yet so keep an open mind.

    • Agree 1
    Link to comment
    Share on other sites

     

    Why you so hyper?  I never mentioned any names.  And for Alpha not to support RHD, well, that is a basic mistake on GM's part.

     

    Which nations need RHD anyway?

     

    The UK, Ireland, Australia, New Zealand, India, Japan, some Carribbean countries, and others...

     

    http://www.worldstandards.eu/cars/list-of-left-driving-countries/

    Edited by Cubical-aka-Moltar
    • Agree 1
    Link to comment
    Share on other sites

    Why you so hyper?  I never mentioned any names.  And for Alpha not to support RHD, well, that is a basic mistake on GM's part.

     

    Which nations need RHD anyway?

    England and Australia mostly. This is the kind of car from Opel that could play a big part in Holden's future. Holden, Vauxhall, Opel and Buick are all joined a the hip and will rely on each other to make up global volumes.

    Buick is being targeted more at lower volume models sold globally and not volume models sold in one market anymore.

    Duncan also has stressed White Space cars. These are shared models with the other brands that would be sold in lower volumes and be the kinds of cars you would never expect from Buick. This means a possible future wagon, Hatch and even a coupe like this. Much of what we see will be shared and this I would expect would be one of them with coupe sales at the volumes they are outside the Camaro and Mustang.

    Link to comment
    Share on other sites

    Why you so hyper?  I never mentioned any names.  And for Alpha not to support RHD, well, that is a basic mistake on GM's part.

    Why so narcissistic? I never even read your post so it was not a response directed at you.

    As for GM not making a RHD Alpha it was a call made at the early time of rebuilding and they were more worried about fixing North America than the world at that point. Hind sight is 20/20 and it is what it is.

    Today Buick is part of the global plan with Holden, Opel And Vauxhall along with Buick of China. When we look at Buick today it must be in a global context not just North America.

    The game for Buick has changed in how they operate and how they will be used. The key here is they will need to reflect a global base and not old memories of 1985 here on a Saturday night.

    If Buick wants new people to buy they need to do new and different things. We have seen this with the Encore but we also will see it in many other products. As long as you do not want to get all sentimental and retro this could be the most compelling division GM has moving forward. I expect the most surprised from them vs. any other division.

    They will be what Pontiac could or should have been starting in the 60's. The division to take risk and make special cars for customers that want to be special. Not a division trying to relive the past on what few high marks they have had in the last 40 years.

    Why you so hyper?  I never mentioned any names.  And for Alpha not to support RHD, well, that is a basic mistake on GM's part.

     

    Which nations need RHD anyway?

    The UK, Ireland, Australia, New Zealand, India, Japan, some Carribbean countries, and others...

     

    http://www.worldstandards.eu/cars/list-of-left-driving-countries/

    Nice list.

    You may also want to list South Africa that Holden already makes cars for in RHD.

    Link to comment
    Share on other sites

    I'm sure that GM could adapt Alpha to suit the markets they plan to sell it in.

    In any event, an Alpha Buick would still be a go in China, where they drive on the same side as we do here.

    Edited by El Kabong
    Link to comment
    Share on other sites

    Well the new Opel GT is to contain the look of the Monza. It is going to be based on the new D2XX platform.

    The new Insignia is to be the basis of the new Regal and it is to contain the new Monza look.

    The new Lacrosse carries some of the new Opel design in the front now too more than ever.

    With that said I would peg this car as a D2XX. Take a Camaro sized car but with the D2XX and make it all wheel drive. Get it to be a car similar to the Audi A5 like class coupe.

    Or even could this be a down sized Omega that takes a part Avenir and adapts it to a coupe?

    Either way I do not expect it to be an Alpha as we have it today. Being it is a styling concept and not a prototype for production it could be presenting a case for a new Coupe on the updated Alpha now being worked on.

    I'm sure that GM could adapt Alpha to suit the markets they plan to sell it in.

    In any event, an Alpha Buick would still be a go in China, where they drive on the same side as we do here.

    Don't forget Hong Kong. RHD.

    Link to comment
    Share on other sites

    I love the idea of a grand touring coupe.  I don't like the Hyundai Genesis Coupe ripoff taillights or the Infiniti front end.  The grille looks like it came off a Ford, the front is similar to the Mustang.  It is a decent looking car, but to me it doesn't look very American or Buick-like.    If all the badges were off it, I would think it was Japanese.

     

    I do hope they put it in production though, it reminds me a bit of the Chrysler Firepower concept that they never made.

    firepower_concept.jpg

    • Disagree 1
    Link to comment
    Share on other sites

    The top end & concept arena of larger coupes, unfortunately, is increasingly homogenizing. Short high tail, long diving hood, angry headlights, low grille, rear fender haunches, some sort of front fender vent/scoop…. that just about is the complete recipe for designing one of these. There's going to be overlap because the range of coupes gets tighter & tighter (outside heritage designs such as the Camaro & Challenger)

    Add to that scenario the supposed "need" for all 'competitive' brands to offer (or display a concept) coupe, and you have more players than ever, it seems.

     

    No surprise here, whatsoever.

     

    That said, I think the Avista is very well executed.

    Link to comment
    Share on other sites

    I agree most of these coupes look similar because there is one best way to design them. This concept does have the body shape similar to the DB9 and Jaguar XK which is what you want. I like the body shape of the car, the headlights and tail lights just don't look like a Buick. Where is the waterfall grill?

    Link to comment
    Share on other sites

    I think I'm going to just go ahead and hyper

    ventilate on this.  This car is EVERYTHING!

    Yes it is everything but production.

    I will caution here as they stated clearly this is a styling exercise just as the Avenir was.

    Link to comment
    Share on other sites

    I like this car a lot.

    I just worry that with Buick for two years has hit Concept car home runs but we have of yet to see anything in production. People will tire of the tease unless they come through at some point.

    I would also caution too that the car would be difficult to build as a true hard top. It would add a lot of weight to do it that way other wise the Camaro would have been that way too.

    This is a true take on the Euro GT class and it would be a great car for Opel as well as Buick.

    To me it is a mid luxury version of a Bentley GT.

    Anyone really want a GN now? It is time to create new legends and not repeat the past.

    Link to comment
    Share on other sites

    They should build it for sure. We need coupes and interesting cars on the market, everything is becoming a Camry, Accord or crossover and that is boring.

    The key for the production model is pricing. If it is too expensive they won't get any volume, and you can't really price it above an ATS. Plus I think you want a car like this to steal sales from Lexus ES, Avalon, Acura TSX, etc. And those are all sedans but I bet a lot of buyers of those cars never use the back seat anyway.

    Link to comment
    Share on other sites



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive
  • Similar Content

  • Posts

    • I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • Either a co-pilot first time landing or something truly went wrong on the plane.
    • The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.
  • Who's Online (See full list)

    • There are no registered users currently online
  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings