Jump to content
Create New...
  • William Maley
    William Maley

    2017 Ford Fusion Sport Packs 325 Horsepower for $34,350*

      Plus 380 Pound-Feet of Torque*


    When Ford provided the details of the 2017 Fusion lineup earlier this year, the one model that caused our eyes to widen was the Fusion Sport. Packing a twin-turbo 2.7L EcoBoost V6, the Sport would have 325 horsepower and 350 pound-feet of torque. Well, Ford has announced the final power figures for the Sport and our eyes are even wider.

     

    The Sport will still have 325 horsepower coming from the V6. But torque has been increased to 380 pound-feet. No, that isn't a misprint. Not only does the Sport blow everyone out of the midsize sedan class in terms of power, it also gives the likes of the BMW 340i a run for its money (320 horsepower, 330 pound-feet of torque). This is paired with a six-speed automatic and all-wheel drive.

     

    There is a catch. The only way to get that magical 380 pound-feet is to fill up 93 octane gas. Fill up with anything lower, and the torque figure drops to 350. Another downside is fuel economy. EPA says the Fusion Sport will return 17 City/26 Highway.

     

    Ford also revealed pricing for the 2017 Fusion Sport. When it arrives at dealers towards the end of summer, the Sport will carry a pricetag of $34,350 (includes a $875.00 destination charge).

     

    Source: Ford

     

    Press Release is on Page 2



    NEW FORD FUSION SPORT GIVES OWNERS OF GERMAN SEDANS 380 REASONS TO CHANGE THEIR LEDERHOSEN

    • Following success with Explorer Sport and Edge Sport, Ford seeks to woo performance car buyers – including those considering Audi, BMW and Mercedes-Benz – with all-new Fusion V6 Sport
    • 2017 Ford Fusion V6 Sport will offer class-demolishing 380 lb.-ft. of torque from 2.7-liter twin-turbocharged EcoBoost® engine, along with 325 horsepower
    • Premium sports sedan comes with standard all-wheel drive

     

    DEARBORN, Mich., June 9, 2016 – Ford is adding serious EcoBoost® muscle to its Fusion sedan in an all-out assault on more expensive German sport sedans.

     

    Following on the success of Explorer Sport, which has seen one in five buyers come over from recent Audi, BMW and Mercedes-Benz experiences, Ford has its eyes not only on owners of V6-equipped Toyota Camrys and Honda Accords, but some other distinguished German models that command a five-figure premium over the 2017 Fusion Sport.

     

    Since the newest-generation Fusion launched in 2012, midsize car buyers have been asking for a performance version, says Wade Jackson, Ford Fusion marketing manager.

     

    “It’s not just Fusion buyers who want something hotter,” Jackson says. “Owners of other midsize sedans, along with our own dealers, ask repeatedly. So buyers get a 2.7-liter EcoBoost that makes 325 horsepower and a more impressive 380 pound-feet of torque.”

     

    These consumers also crave a car that’s much more distinctive inside and out, Jackson explains. “Cross-shoppers will be shocked by the bang for the buck our new Fusion Sport delivers,” he says.

     

    Peak torque of 380 lb.-ft. from a 2.7-liter twin-turbocharged EcoBoost® engine makes Fusion Sport stouter than established performance sedans like BMW 535i, Audi A6 3.0T and Mercedes-Benz E400. Ford Fusion Sport torque rating is achieved with 93-octane fuel.

     

    Ford has reason to be confident with its newest sport-minded offering. While Explorer sales rose 24 percent from 2013 to 2015, Explorer Sport jumped 103 percent. Edge sales were close to flat over that same period – mostly due to model changeover – but Edge Sport jumped 62 percent.

     

    For discerning sport sedan buyers seeking the ultimate in braking and handling performance, a summer-only tire package will be available as well.

     

    The 2017 Ford Fusion Sport starts at a very un-German sports sedan price of $33,475, and that’s with all-wheel drive as a standard feature.


    User Feedback

    Recommended Comments

    There are no comments to display.



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive
  • Similar Content

  • Posts

    • I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • Either a co-pilot first time landing or something truly went wrong on the plane.
    • The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.
  • Who's Online (See full list)

    • There are no registered users currently online
  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings