Jump to content
Create New...
  • William Maley
    William Maley

    GM Shelves Diesel Option for Equinox and Terrain

      ..Slow sales caused the demise of the diesel option..

    There will be one less engine option for the Chevrolet Equinox and GMC Terrain come the 2020 model year. The Car Connection first reported the news on the Equinox yesterday morning, while Autoblog followed with the Terrain news later in the day. Both stories reported the same reason for cancellation, they didn't sell.

    "We did discontinue the diesel engine option in the 2020 Chevrolet Equinox due to low demand," said Chevrolet spokesman Kevin Kelly.

    The news doesn't come as a shock to us. Diesel engines have gotten a bad rap since the Volkswagen diesel emission scandal came to light, causing sales to drop. The value argument was also tough for both models. A diesel Equinox started at $30,795. But only for $100 more, you could have gotten into the 2.0L turbo-four that offered better performance. Over at the Terrain, the diesel cost around $2,000 more than the 2.0 turbo-four. Diesel fuel is more expensive than its gas counterpart as well.

    That will leave the upcoming Mazda CX-5 Skyactiv-D as the only diesel option in the compact crossover class. But as we have noted previously, the diesel option is quite expensive (begins at $42,045) and fuel economy figures are disappointing (27 City/30 Highway/28 Combined).

    Source: The Car Connection, Autoblog

    User Feedback

    Recommended Comments



    I still think the efficiency alone(excluding the fact it costs $3800 more than a comparably equipped 1.5T gasser) makes a very viable choice for those who commute 70-100 miles a day but they don't want to be stuck in a car. As we all know CUVs are all the craze so you'd think if people knew about it, it would have sold well enough to be kept around. 

    • Like 1
    Link to comment
    Share on other sites

    15 minutes ago, ccap41 said:

    I still think the efficiency alone(excluding the fact it costs $3800 more than a comparably equipped 1.5T gasser) makes a very viable choice for those who commute 70-100 miles a day but they don't want to be stuck in a car. As we all know CUVs are all the craze so you'd think if people knew about it, it would have sold well enough to be kept around. 

    Except for those of us into the auto scene, most people did not know about it due to the lack of marketing / use case focus story telling to move them. Kinda like some of the various auto's that Ford built and I think have a useful life yet are being killed off. Fusion should not be dying. Just saying.

    Link to comment
    Share on other sites

    Makes me laugh when surreal tries to pair the 2.0t to the diesel as if they are anywhere in the same universe.  The 2.0t is for hotshoes... or even ppl who feel safer with a lot of power under their right foot.  The diesel is... for ppl who prize fuel mileage and longevity over straight line scoot.  Diametrically opposed customer bases.

    PPL on VW's Facebook page are still commenting... they'd love a TDi Tiguan.

     

    GM went through the expensive process of certifying the diesel in the US... then they did NOTHING to sell it!  Stupid!

    Link to comment
    Share on other sites

    15 hours ago, dfelt said:

    Except for those of us into the auto scene, most people did not know about it due to the lack of marketing / use case focus story telling to move them. Kinda like some of the various auto's that Ford built and I think have a useful life yet are being killed off. Fusion should not be dying. Just saying.

    That's what I said, "you'd think if people knew about it, it would have sold well enough to be kept around."

    13 hours ago, ocnblu said:

    PPL on VW's Facebook page are still commenting... they'd love a TDi Tiguan.

    Absolutely. People who had TDi's, loved them. I had two friends with them and they also loved them. They could eek out 50mpg. 

    • Agree 2
    Link to comment
    Share on other sites




    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive
  • Similar Content

  • Posts

    • I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • Either a co-pilot first time landing or something truly went wrong on the plane.
    • The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.
  • Who's Online (See full list)

    • There are no registered users currently online
  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings