Jump to content
Create New...
  • William Maley
    William Maley

    Mercedes-AMG to Launch 53 Line Next Year

      Will be debuting at the Detroit Auto Show

    Back in June, we reported in the rumorpile that Mercedes-AMG was planning to launch a new lineup of models with the 53 designation. These models would set themselves apart due to them being equipped with a mild-hybrid setup. The redesigned CLS-Class would be the first model to debut the 53.

    Speaking to Automotive News, Mercedes-AMG boss Tobias Moers confirmed the existence of the 53 and that the CLS would be the first. All 53 models would be powered by a higher-output variant of the new turbocharged 3.0L inline-six paired up with a 48-Volt electrical system. Moers wouldn't say how much power the 53 series will produce but hinted that the AMG variant of the inline-six would produce somewhere in the range of 400 horsepower.

    With the new 53 lineup, the CLS will lose out on having an AMG 63 model. Moers said that would be taken up by a new four-door version of the AMG GT. A concept of this model was shown earlier this year at the Geneva Motor Show.

    More information on the AMG 53 will be announced next month at the Detroit Auto Show.

    Source: Automotive News (Subscription Required)

    User Feedback

    Recommended Comments



    9 minutes ago, dfelt said:

    If the Inline 6 was so superior, then why did they dump it for a V6

    Probably the same reason they're moving to the I6 configuration. Back then, V8's sold in most every model so a modular design there paid off, economies of scale with V8's. Now that V8's are dying and everything is downsizing a practical move is to move their bulk engines to being modular with each other. Hence, I6-I3. 

    Link to comment
    Share on other sites

    The reason it got dumped was packaging.  I6 engines are tall and as such they reach maximum displacement for a given engine bay a lot sooner than a V engine.   Where an old I6 might have topped out around 3.5 liters with no room to grow, V engines could get larger even up to including V8s and V10s. 

    Add to that European pedestrian hood crush standards and there was no way MB was going to be able to keep up with the power race.  BMW did it with turbochargers and moving to 4-cylinders.

    • Like 1
    • Agree 1
    Link to comment
    Share on other sites

    7 hours ago, dfelt said:

    Yet like flip flopping fish you state this is world best with HP and Torque and now you say we do not know anything. So which is it, world best which seems not to be, marketing BS to just confuse the lemmings buying their products or honestly just pushing the agenda of MB makes best of everything?

    Well.......

    hqdefault.jpg

    We know what the engine does in the Euro S-class, but that isn't an AMG car either.  And I think the overall NVH, gas mileage, power output, etc, all together will make it the best 6 cylinder out there.  Aside from the Mercedes-AMG 1.6 liter bi-turbo V6 with 750 hp.

    • Haha 1
    Link to comment
    Share on other sites

    These fake AMG cars aren't real AMG cars either. They're watering down the brand with that crap. 

    Ehhh I think it is a bit of a stretch saying it is THE BEST 6 out there. If you're just talking straight numbers, which it appears so if you're claiming the 1.6 in the hyper car is the best, then the Ford GT's needs to be up there along with the Raptor/Navigator's. That is if you're just talking horsepower and torque, which you likely are. 

    Edited by ccap41
    • Like 1
    Link to comment
    Share on other sites

    I mean the ZJ220 had a twin turbo V6 back in the 90's making 542hp.. That's a great reason why you looking strightly at output isn't always good because your I6 Mercedes engines will take a back seat to a nearly 30 year old car.

    • Like 1
    Link to comment
    Share on other sites

    ZJ220.

    As in Jaguar ZJ220. Production from 1992-1994.

    The concept car and promise was for it to be a 12 cylinder. Many deposits for it. When Jaguar decided for it to be a Twin Turbo V6, many of those deposits were canceled.

    Image result for jaguar xj220

    Pretty little thing. From the front....

     Not so pretty from the back. In my opinion.

    Image result for jaguar xj220 1993

     

    • Thanks 1
    • Agree 1
    Link to comment
    Share on other sites

    Ahh, the XJ220.   A very low volume supercar with a handbuilt engine.  Not really comparable to M-B's production engines.  (the only ZJ I know was the first gen Grand Cherokee, and I know there was no 220 variation..)

    Edited by Cubical-aka-Moltar
    Link to comment
    Share on other sites

    11 minutes ago, Cubical-aka-Moltar said:

    Ahh, the XJ220.   A very low volume supercar with a handbuilt engine.  Not really comparable to M-B's production engines. 

    Image result for yes yes yes gif

    Very low volume. 224 built. Even a Buick Grand National GNX had more production numbers than that of an XJ220. 

    Handbuilt...could it be a moot point as AMG engines are handbuilt?  Either way, your point will always be valid.  The inline 6 from Mercedes is intended to be mass produced and to be used in a plethora of vehicles. 

    The inline 6 from Mercedes would be akin to the 3.8 liter V6 from Buick or the ecoboosted 3.5 from Ford.  Designed to be mass produced to be used in all sorts of cars, but a special few would be made into something special and put into special halo cars...

    Edited by oldshurst442
    Link to comment
    Share on other sites

    2 minutes ago, oldshurst442 said:

     

    Handbuilt...could it be a moot point as AMG engines are handbuilt?  Either way, your point will always be valid.  The inline 6 from Mercedes is intended to be mass produced and to be used in a plethora of vehicles.  

    AMGs are mass produced today, though..they build a lot more than 224.  As far as Mercedes last inline 6, it was fairly old when they replaced them in the 90s..they did have some AMG and Brabus variations.    My sister had a '91 300CE w/ the 3.0 I6...not a particularly fast car, but the engine was very smooth and liked to rev.  

    Link to comment
    Share on other sites

    Bottom line is in a couple years time, ever car magazine will compere the Mercedes E-class or GLE or GLS450, C43 AMG or whatever, to the competitors from Lexus, Cadillac, Jaguar, Audi and BMW, and they will all knock the V6s for how they aren't as refined, and say how the BMW doesn't have the fuel economy of the Benz. 

    Link to comment
    Share on other sites

    It makes me wonder if the Americans should consider going back to I6 engines and add some boost. They make great truck engines too because they have more journal bearings than a V6 which makes them naturally more durable. In naturally aspirated form, they tend to have better torque delivery than a V, but that's not a hard rule.

    I'd not mind a 3.5 boosted I6 in a Silverado.

    6 minutes ago, smk4565 said:

    Bottom line is in a couple years time, ever car magazine will compere the Mercedes E-class or GLE or GLS450, C43 AMG or whatever, to the competitors from Lexus, Cadillac, Jaguar, Audi and BMW, and they will all knock the V6s for how they aren't as refined, and say how the BMW doesn't have the fuel economy of the Benz. 

    I mean, why does C&D or Motortrend hire writers... They just reprint the same review each year and change the snark.

    Link to comment
    Share on other sites

    Aren't inline 6s generally too wide for transverse use?  I assume one reason auto makers like V6s is they can work with north-south and transverse configurations.  GM had the Atlas inline engines for trucks and SUVs in the 00's but they are gone...

    Edited by Cubical-aka-Moltar
    Link to comment
    Share on other sites

    Just now, Cubical-aka-Moltar said:

    Aren't inline 6s generally too wide for FWD use?  I assume one reason American car makers like V6s is they can work with north-south and transverse configurations.  GM had the Atlas inline engines for trucks and SUVs in the 00's but they are gone...

    V6 is dying in Mass market cars anyway, so that's less of a consideration anymore. A RWD only I6 could be useful for Cadillac, Camaro, trucks and the RWD SUVs.

    The FWD 3.6 V6 can soldier on in the Impala, Lacrosse, Regal, and big crossovers. XTS is dying. Nothing else FWD still uses it. If Impala and Lacrosse go away... Well....

    • Like 1
    Link to comment
    Share on other sites

    13 hours ago, Cubical-aka-Moltar said:

    Ahh, the XJ220.   A very low volume supercar with a handbuilt engine.  Not really comparable to M-B's production engines.  (the only ZJ I know was the first gen Grand Cherokee, and I know there was no 220 variation..)

    Yeah, my bad on the typing.. 'z' and 'x' are right next to each other... *face palm*

    And I agree. They shouldn't be compared but some like to look strictly at output and say one is superior to the other and this XJ220 has a higher output V6 than the new Mercedes sixes. 

    • Like 1
    Link to comment
    Share on other sites

    13 hours ago, smk4565 said:

    Bottom line is in a couple years time, ever car magazine will compere the Mercedes E-class or GLE or GLS450, C43 AMG or whatever, to the competitors from Lexus, Cadillac, Jaguar, Audi and BMW, and they will all knock the V6s for how they aren't as refined, and say how the BMW doesn't have the fuel economy of the Benz. 

    I wouldn't expect anything else from you. 

    • Agree 2
    Link to comment
    Share on other sites

    Image result for facepalm gif

    I just realized I did the same thing...

    X...J220

     

    If a Camaro does  indeed get an inline 6 sometime in the future...

    IF is all Im saying....

    What a strange turn of events it would be...

    I think there is more of a chance it get the Bolt battery technology and powetrain, but that would be for another conversation elsewhere in this website...

    • Like 1
    • Haha 1
    Link to comment
    Share on other sites

    I've owned 2 different I-6s; nothing to write home about as far as smoothness went, and no better than V6s in the driveway.
    I'm not against them per say, but I want the reason behind the move to be clear : to cut costs.

    Link to comment
    Share on other sites




    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive
  • Similar Content

  • Posts

    • I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • Either a co-pilot first time landing or something truly went wrong on the plane.
    • The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.
  • Who's Online (See full list)

    • There are no registered users currently online
  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings