Jump to content
News
Reviews
Discussons
Activity
Create New...
Close
  • Drew Dowdell
    Drew Dowdell

    By Drew Dowdell •

    Toyota Introduces Camry and Avalon with All-Wheel Drive

      ...get a grip...

    Toyota announced today that the Toyota Avalon and Camry would be getting an all-wheel drive option. It's the first time the Camry has offered all-wheel drive since 1991 and the first ever for Avalon.  AWD will be available as a standalone option on Camry LE, XLE, SE, and XSE trims and on the Avalon XLE and Limited trims.

    In both models, the car is powered by a 202 horsepower 2.5-liter 4-cylinder and an 8-speed automatic. Camry XSE AWD and both Avalon AWD trims get 205hp with their dual exhaust. 

    The AWD system is borrowed from the Toyota RAV-4 and is called Dynamic Torque Control AWD. It is designed to help with traction in slippery weather but not drag down fuel economy when the weather is clear. The AWD system can direct up to 50 percent of the torque to the rear wheels.  When AWD isn't needed, the system can disengage the drive shaft from the differential to lessen the drag on fuel efficiency. 

    Neither of these cars was originally planned to have AWD, but given the flexibility of the TNGA architecture they and the RAV4 all ride on, Toyota's R&D department in Saline Michigan was able to modify the cars for this new option.  The body of the Camry and Avalon was combined with the drivetrain of the RAV-4. Floor structure modifications were required, plus the use of an electronic parking brake.  The gas tank was modified, and despite of the addition of a rear differential, the trunk floor height remains the same.  The addition of AWD adds 165lbs to the Camry while the Avalon's weight remains the about the same as the FWD V6 model. 

    Camry AWD will be arriving for model year 2020, while Avalon AWD arrives in 2021. 

    Go to articles

    User Feedback

    Recommended Comments



    trinacriabob

    I was looking around to see what the next Camry might look like.  If you look at 2022, the price on the basic 4 cylinder LE keeps going up.  Before discounts, you're looking at a MSRP of about $26K to $27K.

    I had a rented Camry in February.  Some may dog it all they want, but I was surprised to see how nicely the 2.5 liter 4 cyl. (normally aspirated) drove with an 8 speed automatic with smooth, purposeful shifts.  And that, with that "big" of an engine and no turbo, the great highway fuel mileage it pulled in.

    So I found this one image, and one link points to it as being a design 2017 and another link points to it as being the future.  Here it is:

    2021-toyota-camry-front-view.png?resize=

    Well look at that.  It looks more Alfa Romeo up front than appliance.  The front is a big improvement.  The sweep on the side is reminiscent of the Verano.  The roof shape is like that of the very first Aurora.  And, then, the rear sail panel / C-pillar is sort of messy, like that of the current Nissan Altima.  It's hard to comment on the rear fascia because you can't see it.

    This is the direction the next Camry design should be going.  I like this front end. 

    I think there are three things on the current car that need to go away:  1) the chunky multi-layered lower plastic grille - awful, 2) the rear sail panel curvature that looks like it belongs on a '72 Caprice,  and 3) the annoying 45 degree diagonal in the center stack, made even worse by a "laptop left open" infotainment center.  Don't be hitting the next redesign with the ugly stick. 

    What needs to stay is a proven, normally aspirated 4 cylinder engine with decent displacement and their nicely calibrated 8 speed automatic transmission.

     

    Link to comment
    Share on other sites


    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

    ×

  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive

  • Similar Content

  • Posts

    • David
      Random Thoughts Thread

      By David · Posted

      I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • David
      Airplanes

      By David · Posted

      Either a co-pilot first time landing or something truly went wrong on the plane.
    • trinacriabob
      Random Thoughts Thread

      By trinacriabob · Posted

      The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • trinacriabob
      Random Thoughts Thread

      By trinacriabob · Posted

      Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • trinacriabob
      Airplanes

      By trinacriabob · Posted

      I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.

  • Who's Online (See full list)

    • There are no registered users currently online

  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

I've whitelisted
Continue without support

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings