Jump to content
Sign in to follow this  
William Maley

Ford News: Spying: The Smaller Fusion aka The 2014 Ford Fiesta

Recommended Posts

William Maley

Staff Writer - CheersandGears.com

August 9, 2012

The updated Ford Fiesta has been caught once again while doing some testing and it gives us our best look at what to expect.

The front end has a vibe of the upcoming 2013 Ford Fusion, with its Aston Martin-esk fascia and similar styling on the headlights. Around the back is a new lip spoiler on the trunk and the taillights getting the Fusion treatment.

The current Fiesta's engine; a 1.6L inline-4 making 120 HP and 112 lb-ft of torque will be replaced with a 1.0L turbocharged inline-3, producing around 125 HP and 147 lb-ft of torque.

The new Fiesta is expected to come out at this year's LA Auto Show.

Source: Motor Trend

William Maley is a staff writer for Cheers & Gears. He can be reached at william.maley@cheersandgears.com or you can follow him on twitter at @realmudmonster.


View full article

Share this post


Link to post
Share on other sites

This is sounding more and more like an great little starter car and or commuter car for people that are looking to be frugal and or are on a tight budget.

GM needs to do a comparison and see how they stack up against this car.

Share this post


Link to post
Share on other sites

Sweet torque number on the new motorcycle engine. This will put it back in the running with the Sonic, performancewise.

Share this post


Link to post
Share on other sites

Your content will need to be approved by a moderator

Guest
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Who's Online   1 Member, 1 Anonymous, 17 Guests (See full list)



  • Similar Content

    • By William Maley
      The lengths that automakers go to with camouflaging vehicles continues to amaze us. Case in point, the first spy photos of the next-generation Chevrolet Suburban has hit the internet. General Motors has covered up every surface, including the underside. That's because the new Suburban appears to be ditching the solid rear axle for an independent setup. We know this as a spy photographer found the right spot where there was minimal camouflage and captured it.
      Why is Chevrolet switching to an IRS setup? It might have to do with the new Ford Expedition which moved to independent rear suspension. A source told Autoblog that Chevrolet wouldn't have fit IRS because it was expensive, but plans changed when the Expedition made a big splash with it. Of course, IRS could have been in the cards for some time. Nevertheless, this setup will help improve ride quality significantly.
      Engines are expected to mirror the new Silverado, which might include the new turbocharged 2.7 four-cylinder.
      Source: Autoblog, CarScoops

      View full article
    • By William Maley
      The lengths that automakers go to with camouflaging vehicles continues to amaze us. Case in point, the first spy photos of the next-generation Chevrolet Suburban has hit the internet. General Motors has covered up every surface, including the underside. That's because the new Suburban appears to be ditching the solid rear axle for an independent setup. We know this as a spy photographer found the right spot where there was minimal camouflage and captured it.
      Why is Chevrolet switching to an IRS setup? It might have to do with the new Ford Expedition which moved to independent rear suspension. A source told Autoblog that Chevrolet wouldn't have fit IRS because it was expensive, but plans changed when the Expedition made a big splash with it. Of course, IRS could have been in the cards for some time. Nevertheless, this setup will help improve ride quality significantly.
      Engines are expected to mirror the new Silverado, which might include the new turbocharged 2.7 four-cylinder.
      Source: Autoblog, CarScoops
    • By William Maley
      Before the start of this year's Detroit Auto Show, Ford held a press conference revealing new models such as the new Bullitt Mustang and Ranger. But they also teased a new electric crossover wearing an iconic name - Mach 1. The only details provided by Ford is that it would provide a range of 300 miles and launch in 2020. A new report from Autocar has some possible new details on the vehicle.
      The Mach 1 crossover currently has the codename of CX430 and will likely have some design cues inspired by the Mustang. Underpinning the model will be Ford's C2 platform. Currently, this platform is being used for the next-generation Focus and Escape crossover.
      The Mach 1 is part of Ford's plan to launch 16 electric vehicles by 2022.
      Source: Autocar

      View full article
    • By William Maley
      Before the start of this year's Detroit Auto Show, Ford held a press conference revealing new models such as the new Bullitt Mustang and Ranger. But they also teased a new electric crossover wearing an iconic name - Mach 1. The only details provided by Ford is that it would provide a range of 300 miles and launch in 2020. A new report from Autocar has some possible new details on the vehicle.
      The Mach 1 crossover currently has the codename of CX430 and will likely have some design cues inspired by the Mustang. Underpinning the model will be Ford's C2 platform. Currently, this platform is being used for the next-generation Focus and Escape crossover.
      The Mach 1 is part of Ford's plan to launch 16 electric vehicles by 2022.
      Source: Autocar
    • By William Maley
      Last week, Ford halted production of their F-Series pickup after a fire ravaged a supplier's plant in Southwestern Michigan. While Ford and supplier Meridan said everything was ok, analysts said it the shutdown could hurt Ford if it lasted more than a week. Last night, Ford announced that it would restart production of the F-150 at their Dearborn plant on Friday. Production at Kansas City and Louisville will come back online on Monday.
      Getting to this point took a lot of work for both Ford and Meridan. According to Automotive News, Ford was the first automaker on site after the fire and was able to retrieve all of the tooling over a 48-hour period. One of dies used was shipped to Meridan's plant in Nottingham, UK. To get it there was a bit of a challenge since it weighs 87,000 pounds. Ford was able to charter an Antonov cargo plane (one of just 21 planes in the world that handle this task) and get it shipped to the UK in just 30 hours.
      Faced with unexpected adversity, the Ford team, including our global supply partners, showed unbelievable resiliency, turning a devastating event into a shining example of teamwork. Thanks to their heroic efforts, we are resuming production of some of our most important vehicles ahead of our original targets," said Hau Thai-Tang, Ford's executive vice president of product development and purchasing in a statement.
      Ford declined to say how much production was lost during the shutdown. James Albertine, an analyst with Consumer Edge Research said the week before that Ford could lose up to 15,000 trucks due per week due to the shutdown.
      The company is planning to make up for some of the lost production by shortening the summer shutdown at the Dearborn and Kansas City plants.
      Source: Automotive News (Subscription Required), Ford


      Ford Restarting F-150, Super Duty Production Ahead Of Schedule After Fire At Magnesium Parts Supplier
      Ford is resuming production of the F-150 pickup at Dearborn Truck Plant on Friday. Ford team has also successfully repaired the supply chain for Super Duty; production targeted to restart by Monday for Super Duty at Kentucky Truck Plant and F-150 at Kansas City Assembly Plant Ford marshaled a global team of experts, that included partners and suppliers, following a May 2 fire at Meridian Magnesium Products in Eaton Rapids, Mich., to quickly refurbish and relocate tooling needed to produce parts for the Ford F-150, Super Duty and five other vehicles – Ford Expedition, Explorer, Flex and Lincoln Navigator and MKT Because of this quick action, Meridian is producing truck parts again at its Eaton Rapids facility. Plus, Ford airlifted tooling to a Meridian facility in the U.K. to produce parts for F-150, which will further speed production ramp-up Ford Expedition, Explorer, Flex and Lincoln Navigator and MKT production continue uninterrupted Company reaffirms 2018 adjusted EPS guidance range of $1.45 to $1.70; expects adverse impact of $0.12 to $0.14 per share in second quarter due to lost production DEARBORN, Mich., May 16, 2018 – Ford Motor Company is restarting production of the popular F-150 at Dearborn Truck Plant Friday after just over one week of downtime. The company has also successfully repaired the supply chain for Super Duty, with production targeted to restart by Monday at the Kentucky Truck Plant as well as the Kansas City Assembly Plant that also makes F-150 pickups.
      This follows the massive May 2 fire at the Meridian Magnesium Products facility in Eaton Rapids, Mich.
      “While the situation remains extremely dynamic, our teams are focused on returning our plants to full production as fast as possible,” said Joe Hinrichs, Ford president, Global Operations. “The ramp-up time to full production is improving every day.”
      Ford teams, together with suppliers including Walbridge and other contractors, worked nearly around the clock to get America’s best-selling vehicle franchise back on line as quickly as possible.
      The teams removed 19 dies from Meridian’s badly damaged facility, and in one case, moved an 87,000-pound die from Eaton Rapids, Mich., to Nottingham, U.K., via an Antonov cargo plane – one of the largest in the world – in just 30 hours door-to-door. A die is a tool used to cut or shape material using a press.
      “Faced with unexpected adversity, the Ford team, including our global supply partners, showed unbelievable resiliency, turning a devastating event into a shining example of teamwork,” said Hau Thai-Tang, Ford’s executive vice president of Product Development and Purchasing. “Thanks to their heroic efforts, we are resuming production of some of our most important vehicles ahead of our original targets.”
      Work started immediately in the aftermath of the May 2 fire. Teams removed and remediated safety concerns – including dangling siding – and restored electricity, gaining approval to access the site while debris still smoldered inside.
      This allowed Ford and Meridian to safely retrieve and relocate tools to more quickly resume part production and work to minimize the financial impact of the stalled plants.
      Ford recovered, repaired and validated most dies that were at the Eaton Rapids facility, and Meridian is now producing parts for the F-150 at two locations – Eaton Rapids and Nottingham, U.K. Production of bolsters for Super Duty is also restarting at the Eaton Rapids plant.
      Under normal circumstances, moving tooling the size of a bolster die would take approximately 10 days just to get the proper import and export approvals. However, Ford and its suppliers managed to cut the total time for the entire move to 30 hours, including trans-Atlantic flight time.
      When the team removed the die from the Eaton Rapids factory, it was shipped to Rickenbacker International Airport in Columbus, Ohio. Rickenbacker had both the capacity to handle such a large piece of equipment and allowed an Antonov An-124 Russian plane, one of the largest planes in the world – typically used to transport trains, dump trucks and even a 25-foot sea yacht – to take off as soon as the equipment was loaded.
      Nearly 4,000 miles away, a team in Nottingham was waiting to receive the die and take it to Meridian’s nearby factory. In between, the Ford team received a U.K. import license for the die – a mere two hours before the plane touched down.
      Parts produced at Nottingham are being shipped via daily flights on a Boeing 747 jet until production in Eaton Rapids returns to pre-fire levels.
      Inventories of Ford’s best-selling F-Series pickups and other vehicles remain strong and customers won’t have a problem finding the model they want.

      View full article
  • My Clubs

  • Recently Browsing

    No registered users viewing this page.

  • Reader Rides

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.