Jump to content
Drew Dowdell

Detroit Auto Show Reveal: 2016 Chevrolet Volt: Comments

Recommended Posts


At the North American International Auto Show in Detroit today, Chevrolet unveiled the all new 2016 Chevrolet Volt. The biggest news is the increase in EV range from 38 miles to 50 miles and an increased combined range of up to 420 miles on a full battery and full tank of fuel.

Under the hood is a new 1.5 liter, direct injected 4-cylinder producing 101 horsepower. The battery pack has lost 20 lbs and the range extender has lost 100 lbs. The battery capacity has increased to 18.1 kWh though the number of battery cells has dropped from 288 to 192.

The Volt now no longer requires premium fuel. There is a new 2-motor drive unit that produces 294 lb-ft of torque. Overall, the Voltec system is now 12% more efficient. Acceleration to 30 mph has improved from 3.2 seconds to 2.6 seconds. The system features a Regeneration on Demand control that allows the driver to increase the regeneration via a control on the back of the steering wheel.

2016 Chevrolet Volt 022

2016 Chevrolet Volt interior, Click to enlarge

Inside, Volt effectively maintains the 2+2 seating arrangement with the console on the floor between the two rear seats, though Chevy says you could put a third small person back there if they are willing to straddle the cupholder. The dashboard is completely redesigned. It has ditched the capacitive touch controls in favor of physical knobs and buttons. Chevy's Mylink system is displayed on an 8.0" diagonal touch screen. Chevy reduced the number of icons on the screen for easier use.

The Volt will be built at GM's Hamtramck plant in Michigan with the batteries coming from Brownstown Michigan. The regeneration unit will initially be manufactured in Mexico before shifting to Flint Michigan. GM says that the Volt will be made of up to 70 percent US manufactured parts.

The Volt comes out at a time when gas prices are plunging all over the U.S., not the best timing for a car that is sold on the premise of saving money on gas. However, the Volt may make a compelling argument as just a car that happens to save on fuel.

The 2016 Volt hits the road this summer.

Press Release on Page 2

You can sign up to follow all the stories from Detroithere, or follow us onFacebook, Twitter,andGoogle+


Chevrolet Introduces All-New 2016 Volt

New model features expressive, sleek design and delivers 50 miles of EV range

DETROIT – Chevrolet today unveiled the all-new 2016 Volt electric car with extended range, showcasing a sleeker, sportier design that offers 50 miles of EV range, greater efficiency and stronger acceleration.

The Volt’s new, efficient propulsion system will offer a General Motors’-estimated total driving range of more than 400 miles and with regular charging, owners are expected to travel more than 1,000 miles on average between gas fill-ups.

“The 2016 Chevrolet Volt provides our owners with a no-compromise electric driving experience,” said Alan Batey, president of GM North America. “We believe our engineering prowess combined with data from thousands of customers allows us to deliver the most capable plug-in vehicle in the industry.”

The 2016 Chevrolet Volt’s technology and range advancements are complemented by a design that blends sculpted, muscular proportions with aerodynamic efficiency, and an all-new interior with seating for five and improved functionality.

Everything from charging the battery and checking the charge status, to the intuitiveness of instrument panel controls were designed for easier use.

“According to independent surveyors, Volt owners are the most satisfied in the industry and they were our compass for developing the next-generation model,” said Batey.

2016 Volt highlights:

  • New two-motor drive unit is up to 12 percent more efficient and 100 pounds lighter (45 kg) than the first-generation drive unit
  • Two-motor design enables 19 percent stronger zero-to-30 mph acceleration
  • Battery capacity has increased to 18.4 kWh using 192 cells (96 fewer than current generation) with weight reduced by more than 20 pounds
  • Regen on Demand™ feature enables driver control of energy regeneration via a convenient paddle on the back of the steering wheel
  • New 1.5L range extender, designed to use regular unleaded fuel, offers a combined GM-estimated fuel efficiency of 41 mpg (EPA estimate pending)
  • Stronger body structure and quieter ride
  • New braking system with improved capability and blended Regen feel
  • New, five-passenger seating with available rear heated seats
  • Location-based charging capability
  • 120V portable cord sethas a simpler, compact design with more convenient storage location
  • Available illuminated charge port

The 2016 Volt goes on sale in the second half of 2015.

Sleeker, sportier design

The 2016 Volt has an all-new, muscular design that incorporates Chevrolet performance vehicle DNA inspired cues refined in the wind tunnel.

New features, including active grille shutters, help balance design with efficiency.

Volt’s flowing, dynamic shape is inspired by the toned physiques of athletes and even the natural shapes of wind-swept sands, with carved body sides and fenders that blend into the hood. The front-end appearance retains the iconic Volt identity, with bright upper and lower grille pads.

Greater attention to detail in the design cues, materials and colors also lends a more premium, contemporary aura to its appearance. It also retains the distinctive Volt signature on the upper front doors, carrying over one of the first-generation model’s identifiers.

Inside, the new Volt includes seating for five. Fresh colors exude an inviting upscale aura – complemented by blue ambient lighting – while the controls are more intuitively placed and simpler to operate.

The Volt retains its signature dual digital color displays with an eight-inch-diagonal reconfigurable screen in the instrument cluster to relay driver information. An additional eight-inch-diagonal touch screen in the center of the instrument panel controls the Chevrolet MyLink system.

Fewer icons on the center dash make it easier to operate. Separate climate control knobs and buttons below the center display offer clear, convenient operation.

New Voltec propulsion system

An all-new, second-generation Voltec extended range electric vehicle (EREV) propulsion system is the power behind the 2016 Volt’s increased all-electric driving range, greater efficiency and stronger acceleration. It was engineered based on the driving behaviors of first-gen Volt owners.

Volt owners complete more than 80 percent of their trips without using a drop of gasoline and they tell us they love the electric driving experience. Putting that experience at the center of the new Voltec system’s development helped us improve range, while also making the new Volt more fun to drive,” said Andrew Farah, vehicle chief engineer. “We established a precedent when the original Voltec propulsion system debuted and this newest iteration sets the EV technology bar even higher.”

The Voltec system includes the battery, drive unit, range-extending engine and power electronics.

GM’s industry-leading battery technology has been reengineered for the next-generation Volt. The 2016 Volt will use an 18.4 kWh battery system featuring revised cell chemistry developed in conjunction with LG Chem. While overall system storage capacity has increased, the number of cells have decreased from 288 to 192 as the result of a revised chemistry. The cells are positioned lower in the pack for an improved (lower) center of gravity and the overall mass of the pack is 21 pounds (9.8 kg) lighter.

Like the battery system, the next-generation Volt’s two-motor drive unit delivers increased efficiency and performance along with reduced noise and vibration. The drive unit operates up to 12 percent more efficiently and weighs 100 pounds (45 kg) less than the current system.

Both motors operate together in more driving scenarios, in both EV and extended-range operation. The ability to use both motors helps deliver a 19 percent improvement in electric acceleration from zero to 30 mph (2.6 seconds) and a 7 percent improvement from zero to 60 mph (8.4 seconds). GM engineers designed the Voltec electric motors to use significantly less rare earth materials. One motor uses no rare earth-type magnets.

More convenient location-based charging

Using real-world experiences of today’s Volt owners, Chevrolet made the charging system in the next-generation Volt more convenient for customers to recharge the battery – and to check the charge status.

The new and enhanced features include:

GPS location-based charging

“Owners will now be able to set their charging preferences exclusively for “home” charging and the vehicle will automatically adjust to that setting when it is at “home” based on GPS data,” said Farah, the chief engineer. “The new Volt will give owners greater flexibility for charging on their terms and make public charging easier.”

This will allow owners to pre-set their 120V charging level (eight amps or 12 amps) and whether they wish to charge immediately, set a departure time for each day of the week, or set a departure time and a utility rate schedule to charge only at off-peak rates. These setting will only have to be programmed once and the Volt will default to them when the vehicle return to its home location.

New, more intuitive charge status indicators

The next-generation Volt makes it easier for owners to confirm their Volt is charging and gauge charge status. The new status system features a specially designed tone that indicates when charging has begun, with additional tones for delayed charging. It will even indicate if the charge port door was left open after unplugging but before entering the vehicle.

With a glance through the windshield, an updated charge status indicator light on the on the top of the instrument panel will show the approximate charge level through a series of flashes. An available illuminated charge port makes it easier to plug in after dark.

Portable cord set enhancements

A new 120V portable cord sethas a simpler, compact design with more convenient storage location. The storage bin for the cord is now located on the left side of the Volt’s rear cargo area, above the load floor, for improved accessibility.

Safety features

The new Chevrolet Volt offers new standard and available safety features that work with an all-new body structure to provide crash-avoidance and passenger protection capability. Highlights include:

  • Standard rear-vision camera
  • Ten standard air bags, including driver and front-passenger knee air bags
  • Available active safety features offering lane keep assist with lane departure warning, side blind zone alert with lane change alert, rear cross traffic alert, forward collision alert with following distance indicator, front automatic braking, and advanced park assist with front and rear park assist (semi-automatic parallel parking)
  • Expanded use of high-strength steel throughout the body structure improves strength and reduces weight
  • More effective structural load paths in the frame, along with reinforced rocker panel structures and side structure reinforcements

The new, active safety technologies and structural enhancements build on the Volt’s legacy of top safety performance, which include a 5-Star overall New Car Assessment Program rating from the National Highway Traffic Safety Administration for the current model.

Manufacturing

GM is investing $435 million in the production of the next-generation Chevrolet Volt at the Detroit-Hamtramck Assembly Plant and at the Brownstown, (Mich.) Battery Assembly Plant, where its lithium-ion battery pack is produced.

The new drive unit will be manufactured at GM’s Powertrain plant in Warren, Mich., and the 1.5L engine will be manufactured at GM’s Toluca, Mexico engine plant for the first year of production, then shift to the Flint, Mich. engine plant.

Since its introduction in late 2010, the Volt has established southeast Michigan as the hub of vehicle electrification development and manufacturing. The next-generation Volt will feature approximately 70 percent U.S. and Canadian components within its first year of production, a nearly 20-percent increase from the first generation.


View full article

Share this post


Link to post
Share on other sites

Awesome, very nice 2.0 version. Love the dash. Just wish they had pushed for a 100 mile range plus the generator so you could have a 500 mile car.

Share this post


Link to post
Share on other sites

I dunno... 100 mile range would have been nice, but it would have also required a much larger battery and more weight.  I still believe they are giving the upper brands a more extended version tho. This is pretty damn nice with a 25% gain in EV mode with new battery tech. The weight savings is tremendous, and the look is much more sleek and contemp. LOVE THE rear. Crossing fingers on this one.. as I think this one will get more sales just for looking more normal. 

Share this post


Link to post
Share on other sites

Updated the gallery with some pics from the show floor.  Having slow connection issues at the show today, some of our updates may be slower than normal.

Share this post


Link to post
Share on other sites

Having spent a couple of weeks in a brand new 2014 Volt as a loaner, this looks to be a big improvement in appearance.  The like this interior MUCH better.  I like the rear of this MUCH better.  I do like the front but I think it would look better with less bright work.

Share this post


Link to post
Share on other sites

I think Viper is onto something.  This looks exactly like an Acura version of the Honda Insight, if it existed.  Meh.  Very nice interior though, way nicer than the old car and the Volt's competition.
 

Share this post


Link to post
Share on other sites

The inside looks like what you'd expect from a Malibu, it is a little nicer than a Cruze. The back end looks like a Civic and the front looks like a Toyota with an Acura beak. This looks like a Japanese car, gen 1 had a better front end I think.

Share this post


Link to post
Share on other sites

Spec bumps look good, interior looks good.  Exterior I get too much of a Kia Forte vibe more than Honda, wish it was a bit more distinct aside from the grille.

 

Will be interesting to see how different the next Cruze will look.

Share this post


Link to post
Share on other sites

I like it but I can't get excited about it.  My friend is still pushing towards a Tesla 3... he owns a home with solar panels, so he loves the idea of never fueling up.  His trips would never outrun a Tesla 3's range anyway, and he's willing to wait til 2017.  He did give consideration when I mentioned the Chevy Bolt... although it's really unattractive in my opinion.

Share this post


Link to post
Share on other sites

I like it but I can't get excited about it.  My friend is still pushing towards a Tesla 3... he owns a home with solar panels, so he loves the idea of never fueling up.  His trips would never outrun a Tesla 3's range anyway, and he's willing to wait til 2017.  He did give consideration when I mentioned the Chevy Bolt... although it's really unattractive in my opinion.

More design in the VOLT / Bolt than the Bland Tesla. The only Tesla that has some style is their CUV if they ever deliver it to market and even then it is still bland. Tesla is the Electronic version of Honda. Safe, Conservative and blahhhhhhhhhhhhh.

Share this post


Link to post
Share on other sites

I agree with dfelt. Tesla is incredible for the high-tech systems and electric energy, but it really is subpar in terms of looks. I quite like the look of this Volt and I agree that the 100 mile range would come with repercussions. This car doesn't need additional weight.

Share this post


Link to post
Share on other sites

I like it but I can't get excited about it.  My friend is still pushing towards a Tesla 3... he owns a home with solar panels, so he loves the idea of never fueling up.  His trips would never outrun a Tesla 3's range anyway, and he's willing to wait til 2017.  He did give consideration when I mentioned the Chevy Bolt... although it's really unattractive in my opinion.

 

I really like the tesla model s, but we haven't seen the Model 3 yet to know what it will look like.

Share this post


Link to post
Share on other sites

Great looking car, but I do wonder how similar the new Cruze will look.  I hope they are visually distinguished and not mis-identified by passers-by.

Share this post


Link to post
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Social Stream

  • Similar Content

    • By dfelt
      Revolution most commonly starts in the heart of what is to be disrupted. In this case, oil country is where one of the most revolutionary new motor designs is coming from. The minds at the University of Texas in Dallas, Dr. Babak Fahimi and the Renewable Enery and Vehicular Technology Laboratory brings us this new startup "Linear Labs Inc. A Smart Electric Motor Company" who just completed their funding round to allow them to market and produce their flagship motor, the Hunstable Electric Turbine motor.
      Currently today's electric vehicle has a high revving horsepower motor with low torque, as an example you can find many electric motors that produce 50 horsepower at 10,000 rpm with 26 lb-ft of torque. The Hunstable Electric Turbine motor produces that same 50 horsepower at 1,300 rpm with 200 lb-ft of torque thus eliminating the need for a gear box as well as other components which in turn reduces cost and complexity.
       

      The Hunstable motor while eliminating geared reduction thus being useful for direct drive applications retains the capability to perform at extremely high speeds and maintains maximum efficiency throughout the loading curve.
      Let's get into the technical chops of the Hunstable Electric Turbine (HET) motor.
      Permanent magnet circumferential flux 4 rotor motor 3D magnetic structure produces four active torque producing areas all with the same polarity 30% reduced use of copper in the coil Maximum torque production from all magnetic field interactions Reduced motor size due to patented unique design requires no unproductive open spaces Large Lorentz Force that peaks with a large reluctance force. Best way to explain this is to quote their website: " by extending the length of the magnetic tunnel region, the torque that is present throughout the coils travels without regard to the coils at pole face length. Unlike existing conventional machines where torque is only present at an optimum point as it approaches a magnetic pole, the HET has no single optimum point but rather all positions exhibit maximum torque. The torque and force will exist while the coil in in the tunnel, regardless of tunnel length.
      Traditional electric motors have always had a current pulse from the three phase supply requiring a timed rotation that allows for optimum torque production at a single instant in time where only a single phase is active. Electronics have been used to manipulate and soften the pulsations to some degree to gain performance as seen by the current leading EV manufacturers.
      The HET motor is able to use a different approach due to the large force presented. One could talk about coils, poles and phases but the end result is that the the technology used by the HET Motor allows for all phases produced to create a continuous pulse of power. These power pulses overlap rather than being sequential thus eliminating torque pulsations ending with maximum torque production.
      The HET Motor has an advantage that no other electric motor can equal and that is that via software control, the phases can be controlled into particular patterns allowing for true variable pole count ending in adjustable speed / torque development. To quote Linear Labs: "This allows a speed change increase with no changes in frequency, current or voltage level, which makes an electronic transmission possible."

      Current electric motors use what is called Field Weakening. This is where one has peak torque at 0 RPM but trades torque for speed as it goes faster. Excitation speed increases as torque drops by weakening the magnetic fields.
      Induction motors increase speed by reducing this excitation current, permanent magnet motors inject an opposing current to control this which is known as a D axis current injection. The constant horsepower region is what this area of speed increase is called. Torque being traded for speed, but total horsepower does not change.
      Efficiency drops off in the uses as stated above and this is what the HET motor addresses with its revolutionary design. To quote Linear Labs: " By slightly rotating a single side rotor, an axial magnetic component is introduced. This weakens , as far as the coils are concerned, the total magnetic field experienced by the coils. The degree of field weakening controls the trade-off between torque and speed.
      For the first time in electric machine history, as the HET Motor enters the Constant Horsepower Region, core losses drop and overall efficiencies actually climb."
      At this time you would not be blamed for saying "SO WHAT" what does this get me?
      The benefits of this revolutionary new motor or as Linear Labs likes to call it their electric turbine is the following list:
      Magnetic Configuration producing 100% more torque than any other design. Efficiency, reduced copper losses resulting in reduced on-board energy storage. Power, testing has shown that the HET motor with standard cooling produces continuous and peak power at 1.9 kW and  2.7 kW at a base speed of 3000 RPM superseding any other commercially available electric propulsion unit. Cost and Compactness, resulting in less cost of on-board electronics, converters, controllers, etc. Thermal Management, superior design due to less copper and what is known as end windings that contribute nothing to torque or output giving you superior efficiency. Variable speed applications, perfect for low speed constant use but also for high speed applications. Acoustic Noise, HET motors being smaller than current commercial counterparts along with limited torque pulsation provides a quiet drive system removing most noise heard by the human ear. Some of the markets that are ripe for Linear Labs motors are of course the auto industry, HVAC industry, industry manufacturing, pretty much any market where constant and variable electric motors are being used. This results in potential energy conservation on a large scale.
      Linear Labs see's the potential benefits from scooters, to drones, motorcycles, cars and trucks. The uses of their HET Motor will revolutionize the world while contributing to energy conservation.
       

      View full article
    • By dfelt
      Revolution most commonly starts in the heart of what is to be disrupted. In this case, oil country is where one of the most revolutionary new motor designs is coming from. The minds at the University of Texas in Dallas, Dr. Babak Fahimi and the Renewable Enery and Vehicular Technology Laboratory brings us this new startup "Linear Labs Inc. A Smart Electric Motor Company" who just completed their funding round to allow them to market and produce their flagship motor, the Hunstable Electric Turbine motor.
      Currently today's electric vehicle has a high revving horsepower motor with low torque, as an example you can find many electric motors that produce 50 horsepower at 10,000 rpm with 26 lb-ft of torque. The Hunstable Electric Turbine motor produces that same 50 horsepower at 1,300 rpm with 200 lb-ft of torque thus eliminating the need for a gear box as well as other components which in turn reduces cost and complexity.
       

      The Hunstable motor while eliminating geared reduction thus being useful for direct drive applications retains the capability to perform at extremely high speeds and maintains maximum efficiency throughout the loading curve.
      Let's get into the technical chops of the Hunstable Electric Turbine (HET) motor.
      Permanent magnet circumferential flux 4 rotor motor 3D magnetic structure produces four active torque producing areas all with the same polarity 30% reduced use of copper in the coil Maximum torque production from all magnetic field interactions Reduced motor size due to patented unique design requires no unproductive open spaces Large Lorentz Force that peaks with a large reluctance force. Best way to explain this is to quote their website: " by extending the length of the magnetic tunnel region, the torque that is present throughout the coils travels without regard to the coils at pole face length. Unlike existing conventional machines where torque is only present at an optimum point as it approaches a magnetic pole, the HET has no single optimum point but rather all positions exhibit maximum torque. The torque and force will exist while the coil in in the tunnel, regardless of tunnel length.
      Traditional electric motors have always had a current pulse from the three phase supply requiring a timed rotation that allows for optimum torque production at a single instant in time where only a single phase is active. Electronics have been used to manipulate and soften the pulsations to some degree to gain performance as seen by the current leading EV manufacturers.
      The HET motor is able to use a different approach due to the large force presented. One could talk about coils, poles and phases but the end result is that the the technology used by the HET Motor allows for all phases produced to create a continuous pulse of power. These power pulses overlap rather than being sequential thus eliminating torque pulsations ending with maximum torque production.
      The HET Motor has an advantage that no other electric motor can equal and that is that via software control, the phases can be controlled into particular patterns allowing for true variable pole count ending in adjustable speed / torque development. To quote Linear Labs: "This allows a speed change increase with no changes in frequency, current or voltage level, which makes an electronic transmission possible."

      Current electric motors use what is called Field Weakening. This is where one has peak torque at 0 RPM but trades torque for speed as it goes faster. Excitation speed increases as torque drops by weakening the magnetic fields.
      Induction motors increase speed by reducing this excitation current, permanent magnet motors inject an opposing current to control this which is known as a D axis current injection. The constant horsepower region is what this area of speed increase is called. Torque being traded for speed, but total horsepower does not change.
      Efficiency drops off in the uses as stated above and this is what the HET motor addresses with its revolutionary design. To quote Linear Labs: " By slightly rotating a single side rotor, an axial magnetic component is introduced. This weakens , as far as the coils are concerned, the total magnetic field experienced by the coils. The degree of field weakening controls the trade-off between torque and speed.
      For the first time in electric machine history, as the HET Motor enters the Constant Horsepower Region, core losses drop and overall efficiencies actually climb."
      At this time you would not be blamed for saying "SO WHAT" what does this get me?
      The benefits of this revolutionary new motor or as Linear Labs likes to call it their electric turbine is the following list:
      Magnetic Configuration producing 100% more torque than any other design. Efficiency, reduced copper losses resulting in reduced on-board energy storage. Power, testing has shown that the HET motor with standard cooling produces continuous and peak power at 1.9 kW and  2.7 kW at a base speed of 3000 RPM superseding any other commercially available electric propulsion unit. Cost and Compactness, resulting in less cost of on-board electronics, converters, controllers, etc. Thermal Management, superior design due to less copper and what is known as end windings that contribute nothing to torque or output giving you superior efficiency. Variable speed applications, perfect for low speed constant use but also for high speed applications. Acoustic Noise, HET motors being smaller than current commercial counterparts along with limited torque pulsation provides a quiet drive system removing most noise heard by the human ear. Some of the markets that are ripe for Linear Labs motors are of course the auto industry, HVAC industry, industry manufacturing, pretty much any market where constant and variable electric motors are being used. This results in potential energy conservation on a large scale.
      Linear Labs see's the potential benefits from scooters, to drones, motorcycles, cars and trucks. The uses of their HET Motor will revolutionize the world while contributing to energy conservation.
       
    • By Drew Dowdell
      According to sources familiar with Tesla software, Tesla is preparing to update the Model S and Model X with new, more efficient motors.  Recent software updates have appeared that make reference to the new motors. 
      The new motors with the codename "Raven", are permanent magnet reluctance motors as found in the Model 3. These motors have the benefit of pre-excitation from the magnets giving them an efficiency advantage. They also work to reduce the overall costs of the vehicle.  In the Model 3, the motors can achieve an efficiency rating higher than 97% compared to 93% on the Model S/X.   The difference in efficiency is even more marked in stop and go traffic where the Model 3 is much more efficient than the AC induction motors in the Models S and X. These upgrades could work out to a longer range and better performance for the pair. 
      Tesla sales, though up year over year, have recently crashed down 31% from the previous quarter . While the timing of the release of these upgrades is not known, there are rumors that Tesla is planning a major interior refresh for the pair for 2020, so it could be matched with those updates.  Important timing when vehicles like the Porsche Taycan, Audi E-Tron , and Polestar 2 will be hitting the market over the next 18 months. 
       

      View full article
    • By Drew Dowdell
      According to sources familiar with Tesla software, Tesla is preparing to update the Model S and Model X with new, more efficient motors.  Recent software updates have appeared that make reference to the new motors. 
      The new motors with the codename "Raven", are permanent magnet reluctance motors as found in the Model 3. These motors have the benefit of pre-excitation from the magnets giving them an efficiency advantage. They also work to reduce the overall costs of the vehicle.  In the Model 3, the motors can achieve an efficiency rating higher than 97% compared to 93% on the Model S/X.   The difference in efficiency is even more marked in stop and go traffic where the Model 3 is much more efficient than the AC induction motors in the Models S and X. These upgrades could work out to a longer range and better performance for the pair. 
      Tesla sales, though up year over year, have recently crashed down 31% from the previous quarter . While the timing of the release of these upgrades is not known, there are rumors that Tesla is planning a major interior refresh for the pair for 2020, so it could be matched with those updates.  Important timing when vehicles like the Porsche Taycan, Audi E-Tron , and Polestar 2 will be hitting the market over the next 18 months. 
       
    • By Drew Dowdell
      Karma Automotive is preparing to release the 2020 refresh of the Revaro.  The current car uses GM's 2.0 liter 4-cylinder as a regenerator to charge the 21.4 kWh battery while underway. The battery then powers a pair of electric motors in the rear that produce a combined 403 horsepower letting the Revero dart to 60 in just 5.4 seconds. Range in full EV mode is about 37 miles, so says the EPA.
      In a press release, Karma has announced that the the refreshed Revero will now move to a 1.5 liter BMW 3-cylinder to support a new, more powerful NMC lithium-ion battery pack.  The rear drive unit is being replaced as well with a new twin-motor rear drive module.  In the 2020 car, naught to 60 will drop by nearly a full second to 4.5 seconds. 
      The refreshed Revero will sport updated body work to go along with its technological upgrades. 
      Karma will be unveiling the 2020 Revero at the Shanghai Motor Show on April 16th along with two other concepts. 
       
      2020 Karma Revero Teaser (Click to Enlarge)
      Related:
       

      View full article
  • My Clubs

  • Reader Rides

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×
×
  • Create New...