Jump to content
Sign in to follow this  
William Maley

Fiat News: FCA's Sergio Marchionne Skeptical on Tesla Model 3

Recommended Posts

Fiat Chrysler Automobile's CEO Sergio Marchionne is someone who speaks his mind - for better or worse. Speaking with Automotive News Europe, Marchionne expressed his skepticism on the recently unveiled Tesla Model 3, specifically on how they can make a profit.

 

"I'm am not surprised by the high number of reservations but you have then to build and deliver them and also be profitable," Marchionne said.

 

The Model 3 is Tesla entry into the mass-market EV segment with a $35,000 pricetag. At the moment, reservations for the new model are nearing 400,000. Marchionne doesn't see how Tesla could make money on it.

 

But Marchionne went on to say if Tesla's Elon Musk "can show me that the car will be profitable at that price, I will copy the formula, add the Italian design flair and get it to the market within 12 months."

 

Considering this is the same person who railed against EVs for years, it is a bit of a shock. Asked if he thinks the company is arriving late to the EV party, Marchionne said: “better late than sorry.”

 

Source: Automotive News Europe (Subscription Required)


View full article

Share this post


Link to post
Share on other sites

WOW, Talk about an Idiot. This from a guy who has stolen BILLIONS for the so called revival of Alfa, instrumental to the success of FCA long term rather than reinvest that money into the lines that already exist and bump up quality.

 

If he really wanted to build an EV he would have done it already like GM rather than wait till everyone else has done it, and then follow along way too late and still loosing.

 

This guy is not only NOT a car guy, but has NO business sense and the board really needs to kick his lazy ass out.

Share this post


Link to post
Share on other sites

He is an idiot who has no clue.  There is no possible way they could copy any car and get it to market in 12 months.  Let alone something like an electric that takes more development.  When is the last time FCA developed a good car?  The last good car was the 2005 Chrysler 300 and that was in the Daimler era.  

 

The Fiat 500 had Italian flare, that failed, the 500x was a crossover with Italian flare, it probably the only crossover ever to fail, the Alfa 4C has no sales, the Guilia has long over due and likely over budget and likely won't sell.  Maserati Ghibli was a bust, Fiat 500L a total disaster.  The only hits they have had were the Jeep Cherokee revival and Renegade.  The Grand Cherokee is a success, but was already in place long before Sergio took over.  Dodge Dart is biblically terrible, Avenger dead, no mid-size car at all, Chrysler 200 is sold to rental agencies, and was put on death row 2 years after going on sale.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  



  • Social Stream

  • Similar Content

    • By Drew Dowdell
      Fiat Chrysler is bringing a slew of concepts to the Consumer Electronics Show in Las Vegas that all feature some sort of electrification.
      The centerpiece of their display will be the 2020 Airflow Vision concept.  While not specifically branded as a Chrysler, the Airflow Vision does take the name of a full-size Chrysler model produced from 1934 - 1937.  FCA calls it a "sculptural design concept" that envisions the next generation of premium transportation.  The interior user experience is designed to be captivating. FCA put a lot of work into showing a sophisticated appearance that can be personalized and customized to individual needs. 
      The cabin offers multiple interfaces, one behind the steering wheel, two on the center console, one for the front passenger, and two more for the rear passengers. Information can be shared between the screens by swiping.  The interior is said to be the same size as the Chrysler Pacifica Plug-in and has a flat load floor. In spite of all that room, it only has 4 seats set up in a lounge chair fashion to maximize legroom, shoulder room, and storage space for each passenger. Premium suedes and leathers, along with ambient lighting make the ride a first-class experience. 
      The exterior of the Airflow Vision has an aggressive stance with bodywork reaching almost to the ground. The wheels hint at the use of electric motors, but no powertrain information was provided.



      View full article
    • By Drew Dowdell
      Fiat Chrysler is bringing a slew of concepts to the Consumer Electronics Show in Las Vegas that all feature some sort of electrification.
      The centerpiece of their display will be the 2020 Airflow Vision concept.  While not specifically branded as a Chrysler, the Airflow Vision does take the name of a full-size Chrysler model produced from 1934 - 1937.  FCA calls it a "sculptural design concept" that envisions the next generation of premium transportation.  The interior user experience is designed to be captivating. FCA put a lot of work into showing a sophisticated appearance that can be personalized and customized to individual needs. 
      The cabin offers multiple interfaces, one behind the steering wheel, two on the center console, one for the front passenger, and two more for the rear passengers. Information can be shared between the screens by swiping.  The interior is said to be the same size as the Chrysler Pacifica Plug-in and has a flat load floor. In spite of all that room, it only has 4 seats set up in a lounge chair fashion to maximize legroom, shoulder room, and storage space for each passenger. Premium suedes and leathers, along with ambient lighting make the ride a first-class experience. 
      The exterior of the Airflow Vision has an aggressive stance with bodywork reaching almost to the ground. The wheels hint at the use of electric motors, but no powertrain information was provided.


    • By Drew Dowdell
      In a discussion about their pending merger, Fiat Chrysler revealed that the combined company's future vehicles in the small to mid-size range will be built on two of PSA's platforms.  The reasoning behind it is that PSA's platforms are more modern than FCA's which first debuted in 2003. They are also capable of a wider range of propulsion methods like electrification that are harder to incorporate into the aging platform that FCA is using.  
      The smaller of the two platforms, PSA's CMP, launched last year is found under the Peugeot 208, 2008, DS 3 Crossback and the new Opel Corsa.  The larger platform is called EMP2 and launched in 2016.  It underpins the Peugeot 3008, 5008, 508, DS7 Crossback, Citroen C5 Aircross, and Opel Grandland. Both of these platforms could become the basis for new Jeep, Dodge, and Fiat models. The first possible FCA model to debut on one of these platforms is likely to be a small crossover for Alfa Romeo, due out in 2022.
      On the other hand, the Ram trucks and larger Jeep models will continue to use technology developed by FCA.  The next generation Jeep Grand Cherokee is already well into development and the forthcoming Wagoneer and Grand Wagoneer are set to go into production in early 2021. 
      The primary question mark remains around the larger Chrysler 300, Dodge Charger and Challenger, and Chrysler Pacifica. 

      View full article
    • By Drew Dowdell
      In a discussion about their pending merger, Fiat Chrysler revealed that the combined company's future vehicles in the small to mid-size range will be built on two of PSA's platforms.  The reasoning behind it is that PSA's platforms are more modern than FCA's which first debuted in 2003. They are also capable of a wider range of propulsion methods like electrification that are harder to incorporate into the aging platform that FCA is using.  
      The smaller of the two platforms, PSA's CMP, launched last year is found under the Peugeot 208, 2008, DS 3 Crossback and the new Opel Corsa.  The larger platform is called EMP2 and launched in 2016.  It underpins the Peugeot 3008, 5008, 508, DS7 Crossback, Citroen C5 Aircross, and Opel Grandland. Both of these platforms could become the basis for new Jeep, Dodge, and Fiat models. The first possible FCA model to debut on one of these platforms is likely to be a small crossover for Alfa Romeo, due out in 2022.
      On the other hand, the Ram trucks and larger Jeep models will continue to use technology developed by FCA.  The next generation Jeep Grand Cherokee is already well into development and the forthcoming Wagoneer and Grand Wagoneer are set to go into production in early 2021. 
      The primary question mark remains around the larger Chrysler 300, Dodge Charger and Challenger, and Chrysler Pacifica. 
    • By Drew Dowdell
      Fiat Chrysler Automobiles and Peugeot S.A. have signed a binding agreement to a 50/50 merger of their businesses. Once the merger is complete, the combined company will be the fourth largest automobile producer in the world.  Based on 2018 numbers, the business will sell roughly 8.7 million vehicles annually and have revenues near €170 billion. There will be a strong balance sheet that will allow the new entity headroom to execute strategic plans. Geographically, 46% of revenue will come from Europe and 43% from North America.
      A number of operational efficiencies will be gained by the sharing of platforms and engine technology. The number of platforms will be reduced with approximately 6 million cars a year concentrated on just two platforms.The platform consolidations will account for approximately 40% of the estimated €3.7 billion in savings expected from the merger. 
      Peugeot CEO Carlos Tavares will be CEO of the new company and a board member, while John Elkann of FCA will be Chairman of the Board. The completion of the combination is expected to take 12 to 15 months during which time they will be completing items to the satisfaction of antitrust and other regulatory requirements.

      View full article
  • Reader Rides

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×
×
  • Create New...