Jump to content
William Maley

Ford News: The First Functional Ford GT Prototype Hits The Auction Block

Recommended Posts


If you want to one up your friend who will be getting their hands on a new Ford GT, then why not put a bid on the first functional prototype of the last-generation GT.

Going up for auction next month at Russo and Steele Arizona sale in Scottsdale, AZ, the GT Confirmation Prototype 1 (CP-1) is the first fully functional prototype. It was the fourth GT model ever built - wears the VIN 004 - and the first to come with a full interior. Being a prototype, the GT CP-1 has some special parts such as a "sniffer pipe" for emissions testing, quick-release fuel tank, and a carbon-fiber clamshell. The prototype also features signatures of 13 members of the original Ford GT design and development team including the designer Camillo Pardo and Carroll Shelby. One downside, the vehicle has a top speed of 5 mph.

Ford sold this vehicle back in 2008 to "GT Joey" Limongelli, an avid GT collector and author of the book “Ford GT 2005-2006: The Complete Owners Experience.

Source: Russo and Steele
Press Release is on Page 2


First shown in 2002 to celebrate Ford Motor Company’s upcoming centennial, the Ford GT40 concept car was designed by Camilo Pardo, the head of Ford’s “Living Legends” studio under the direction of Ford design chief J. Mays. Clearly inspired by the GT40s that beat Ferrari at Le Mans in 1966 and dominated there through 1969, the new-generation Ford GT was soon prepared, refined, and tested for production.

A true piece of automotive history, Ford GT prototype CP-1, short for Confirmation Prototype 1, was the first fully-functional Ford GT prototype built in 2003 as part of the all-new GT’s development phase. Assigned VIN 004, it was the first Ford GT prototype to be equipped with an engine, drivetrain, and full interior, in contrast to the red, white, and blue Ford Centennial prototypes which were non-runners for exhibition purposes only and currently reside in the Ford Museum. In 2008, CP-1 was purchased from Ford Motor Company by “GT Joey” Limongelli, the respected GT collector and author of “Ford GT 2005-2006: The Complete Owners Experience,” considered the definitive book on the reborn Ford GT.

In addition to its early provenance, the originality of CP-1 is perhaps what makes the car so tantalizing to hard-core Ford enthusiasts. Its body and engine compartment feature an array of non-standard components and many design features that are exclusive to this prototype, including the air bags, which are in fact Mustang components, and the steering column that was sourced from a Ford Windstar van. The silver trim rings on the seats were eliminated on production cars, the striking Camillo Pardo-designed all-aluminum headliner was replaced in production by a more traditional padded item, and a note scrawled in marker on the center console instructs test drivers to “push red button to start” the mid-mounted V-8 engine, which is mated to a 6-speed transaxle. Outside, the right quarter-panel features two quick-release valves connected to the fuel tank that allow quick changes of fuel grades. Extending beyond the rear bumper, a set of experimental exhaust pipes incorporate a “sniffer pipe” that allowed the engineers to determine engine emissions during testing.

Of further interest, the engine of CP-1 resides beneath a lightweight carbon-fiber rear clamshell. However, when Ford executives learned the projected cost of this item was projected to cost approximately $45,000 to produce, a more traditional and far less-costly aluminum unit replaced it. The engine of CP-1 is fitted with a black supercharger and valve covers, which were replaced in production by a silver blower and traditional Ford Blue valve covers. While CP-1 has a fully functional powertrain and the car has a 17-digit VIN, prior to the sale in 2008 Ford engineers installed a chip in the engine limiting its top speed to 5 mph for display use only. As offered, CP-1 is accompanied by factory Build Sheet documentation, and it retains the test connections and monitoring equipment used during the Ford GT’s road and emissions certification testing.

The vehicle is adorned by the autographs of 13 members of the original Ford GT design and development team including Bill Ford, GT Chief Designer Camillo Pardo, GT Chief Design Engineer Fred Goodnow, and even Carroll Shelby, who played a major role in the Ford GT testing and development program. A true motorsports and design landmark in every respect and an essential part of the Ford GT development and testing process, CP-1/VIN 004 stands as an incredible link bridging the original GT40 of the 1960s to the current Ford GT that took on the world’s best and won at the 2016 running of the 24 Hours of Le Mans. Truly historic as the first powered and fully functional Ford GT prototype, CP-1/VIN 004 offers an incredible opportunity at auction.

Experience all the high energy excitement of Russo and Steele in Scottsdale for yourself! Bidder registration is just $200 and includes admission for all 5 days of “Auction in the Round” action for the bidder and one lucky guest. Stay tuned for further updates on our 17th annual Scottsdale auction and event schedule and join us January 18-22 live from Salt River Fields at Talking Stick!


View full article

Share this post


Link to post
Share on other sites

T

44 minutes ago, ccap41 said:

Somebody buy this and throw it on a dyno and scale for Christ sake.

We still don't have power or weight numbers yet!

This is the last gen ( early 2000's ) Ford GT. 

Share this post


Link to post
Share on other sites
4 minutes ago, FordCosworth said:

T

This is the last gen ( early 2000's ) Ford GT. 

Ohhhhh I read that last little "paragraph" differently(wrong) then.

Well... DAMNIT!

Share this post


Link to post
Share on other sites

Pass, unless you have money to burn, this is a wasted car with the engineering plugs everywhere and especially the limiter to 5 mph unless you have the cash to clean it up and change enough stuff to make it the supercar it should be.

Share this post


Link to post
Share on other sites

Your content will need to be approved by a moderator

Guest
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Who's Online   1 Member, 0 Anonymous, 66 Guests (See full list)



  • Social Stream

  • Similar Content

    • By Drew Dowdell
      When Ford decided to pull the plug in the U.S. on all of its cars except the Mustang, it meant that the U.S. will miss out on a lot of the goodness that European markets get from the Blue Oval.  Today, more evidence of that was released in the form the the updated Ford Focus ST.
      The 2019 Focus ST gains a 2.3-liter turbo 4-cylinder, replacing the 2.0T previously offered. This motor is the same basic unit found in the Focus RS and Mustang.  The motor bumps power up to 276 HP and 310 lb-ft of torque, an increase of 24 hp and 40 lb-ft of torque over the previous car. Running from 0-62 mph (100 kph) takes under 6 seconds. 
      Diesel buyers can opt for a 2.0T diesel Focus ST rated for 187 hp and 295 lb-ft of torque.
      Drivers can choose between a 6-speed manual or an additional cost 7-speed automatic.  Power is sent solely to the front wheels through an electronic limited-slip differential.  Selectable drive modes are available with Normal, Sport, and Slippery-Wet. For manual drivers, there is a Performance pack which includes an additional Track mode plus launch control system, red brake calipers, and rev-matching. 
      The Ford Focus ST will be available in hatch or wagon version and goes on sale this summer.
      See page 2 for the full Ford Press Release







      All-New Ford Focus ST Blends Track-Day Performance, B-road Fun and Everyday Usability Without Compromise
      Ford Performance-developed all-new Focus ST enhanced with advanced sports technologies will go on sale in the summer in five-door and wagon body styles Powerful, free-revving powertrains include 280 PS, 420 Nm, 2.3-litre EcoBoost petrol with twin-scroll turbo and anti-lag; 190 PS 2.0-litre EcoBlue diesel with 400 Nm from 2,000 rpm First Ford front-wheel drive electronic limited-slip differential improves traction and stability. Rev-matching offered for short-shift six-speed manual gearbox. Seven-speed auto available Selectable Drive Modes a first for Focus ST, adjusting features including Electronic Brake Booster and fastest Ford electric power-assisted steering to match performance to scenario Comfort and driving experience optimised with Recaro sports seats and advanced independent rear suspension configuration with available Continuously Controlled Damping COLOGNE, Germany, Feb. 18, 2019 – Ford today revealed the all-new Focus ST – developed by Ford Performance to deliver nimble hot-hatchback thrills in a stylish, comfortable and practical family car.
      The all-new Focus ST builds on the class-leading driving dynamics of the fourth generation Focus in five-door and wagon body styles. Ford’s new C2 architecture is enhanced with unique suspension, braking and powertrain configurations for the most responsive and agile Focus ST driving experience ever – on road and track.
      A new engine line-up makes available to drivers up to 12 per cent more power and 17 per cent more torque compared with the previous generation Focus ST. Ford’s 280 PS 2.3-litre EcoBoost petrol and 190 PS 2.0-litre EcoBlue diesel engines* both deliver a broad spread of power and torque across the rev-range, for fast-revving sports performance.
      Ford’s first application of an electronic limited-slip differential (eLSD) for a front-wheel drive vehicle further enhances as standard the cornering and stability of the EcoBoost-powered variant – sharpening responses to changing grip levels and driver inputs using computer-controlled pre-emptive actuation.
      A choice of six-speed manual or quick-shifting new seven-speed automatic transmissions is offered, and Selectable Drive Modes technology is introduced to the Focus ST for the first time, enabling drivers to adjust the vehicle’s character to suit the driving scenario. Continuously Controlled Damping (CCD) – standard for five-door EcoBoost variants – enhances the short long arm (SLA) independent rear suspension configuration for ultimate refinement.
      “Intelligent technologies like eLSD and CCD make our all-new Focus ST the most ‘Jekyll and Hyde’ yet, able to switch from refined tourer to focussed performance car at the push of a button,” said Leo Roeks, Ford Performance director, Europe. “We’ve incorporated learnings from programmes including our Ford GT supercar and the acclaimed Focus RS to develop a mid-size performance car with a degree of flexibility that’s unique in its segment.”
      The all-new Focus ST will be manufactured with best-ever craftsmanship and quality following a €600 million investment at Ford’s Saarlouis assembly facility, Germany.
      Responsive power delivery
      A new generation of Ford’s 2.3-litre EcoBoost all-aluminium engine is the most powerful ever offered for a Focus ST. Using advanced turbocharging technology to deliver 280 PS power at 5,500 rpm and 420 Nm of torque from 3,000 rpm to 4,000 rpm, it is also the most free-revving Focus ST engine ever, and supports anticipated 0‑100 km/h (0-62 mph) acceleration in less than 6 seconds.
      Engine response is enhanced using a low-inertia twin-scroll turbocharger, which scavenges exhaust gas energy more effectively using separated channels to minimise interference between gas pulses. An electronically actuated waste-gate allows closer control of boost pressures for optimised engine performance. In addition, a unique exhaust system that reduces back pressure, bespoke air intake system and optimised intercooler further improve breathing.
      Innovative anti-lag technology developed for the Ford GT supercar and F-150 Raptor pick-up is introduced to the Focus ST, for immediate power delivery in Sport and Track Drive Modes. Anti‑lag keeps the throttle open when the driver lifts off the accelerator pedal, alleviating the reversal of air flow from the turbocharger to maintain compressor wheel speed and enabling boost pressure to build faster on demand.
      Ford’s 190 PS 2.0-litre EcoBlue is the most powerful diesel engine ever offered for a Ford Focus model, delivering peak power at 3,500 rpm and 400 Nm of torque between 2,000 rpm and 3,000 rpm – and 360 Nm from 1,500 rpm – for immediate and linear acceleration.
      A low-inertia variable geometry turbocharger; steel pistons for less expansion when hot; and an integrated intake system with innovative mirror-image porting for optimised combustion help to deliver a diesel powertrain that produces 10 per cent more power and more than twice as much torque as the 2.0‑litre Duratec ST petrol engine in the first generation Focus ST.
      The Focus ST’s six-speed manual transmission enables more urgent gear-changes and provides a sportier feel with a shift-throw reduction of 7 per cent compared with the standard all-new Focus. Ford’s new rev-matching technology that debuted on the new Ford Mustang is also introduced as part of an optional Performance Pack for 2.3-litre EcoBoost manual models.
      Delivering smoother, faster downshifts, the technology is accompanied by a shift indicator light, and uses the engine’s electronic control system to briefly “blip” the throttle as the driver engages a lower gear – matching the engine rotation speed to that of the gear that is being selected.
      Rev-matching enables less-experienced performance drivers to benefit from the seamless, momentum-maintaining gearshifts delivered by the “heel-and-toe” driving technique, while also enabling experienced performance drivers to deactivate the system if they prefer.
      A new seven-speed variant of Ford’s latest intelligent automatic transmission family complements the rewarding, engaging and sporty 2.3-litre EcoBoost driving experience. Gear differentiation is optimised for performance, and Adaptive Shift Scheduling – which assesses individual driving styles to optimise gearshift timings – is enhanced to offer more flexibility and the ability to differentiate between road and track use. Drivers can select gears manually using steering wheel-mounted paddle-shifters.
      “The EcoBoost petrol and EcoBlue diesel powertrains have unique characters, but are equally charismatic,” Roeks said. “The Focus ST’s sporty ‘pops and bangs’ soundtrack perfectly matches the car’s feisty performance and is an essential part of the ST experience.” 
      Intuitive dynamics enhanced with technology
      Building on accomplished Ford Focus driving dynamics, the new Focus ST was developed to blend B-road fun-to-drive, legitimate track-day performance, and everyday usability better than any vehicle in its class.
      The SLA suspension configuration helps optimise the vehicle’s responses to driver inputs without sacrificing comfort, and includes a unique geometry for wagon models that repositions the dampers helping the vehicle remain nimble and responsive even when fully loaded. The agile and energetic character of the standard Focus is retained using the original spring specifications, with damping stiffness increased up to 20 per cent at the front and 13 per cent at the rear, and ride height reduced by 10 mm, to improve road-holding and response in performance driving scenarios.
      Ford’s sophisticated CCD technology every 2 milliseconds monitors suspension, body, steering and braking inputs to adjust damping responses for outstanding ride quality and driving dynamics.
      The driving experience is further enhanced using eLSD technology for Focus ST 2.3 litre EcoBoost models. Incorporated into the transmission, the system uses hydraulically activated clutches to limit the engine torque delivered to a wheel that has reduced traction on the road surface, and redistributes up to 100 per cent of available torque to the wheel with more traction to counteract wheelspin that can hamper acceleration through, and out of, corners.
      The Borg Warner-developed technology is faster to deploy and offers greater precision than a traditional mechanical LSD. The system can pre-emptively adjust torque distribution using inputs from powertrain and vehicle dynamics sensors, rather than responding to wheelspin as it occurs, and can apply differential locking gradually for fine-tuning performance.
      Focus ST 2.0-litre EcoBlue models feature Torque Vectoring Control technology, which improves road holding and reduces understeer by applying brake force to the inside front wheel when cornering.
      The all-new Focus ST steals Ford’s fastest-steering-response crown from the acclaimed Fiesta ST. The electric power-assisted steering (EPAS) system is 15 per cent faster than the standard Focus, requiring just two turns lock-to-lock.
      Class-leading connected feel is supported by unique steering knuckle geometry, with a rod attachment point 9 mm further forward and 6.5 mm higher than the standard Focus for sharper responses. New Steering Torque Disturbance Reduction software for EPAS also helps reduce torque steer, making it even easier to deploy with precision the Focus ST’s power and torque via bespoke-specification Michelin Pilot Sport 4S tyres.
      Larger front and rear brake components provide the foundation for a high performance braking system with improved stopping power and fade resistance. Front disc dimensions have grown to 330 mm x 27 mm and feature dual-piston callipers. Rear discs now measure 302 mm x 11 mm. Focus ST braking performance was verified using the same demanding test procedures as the Ford GT supercar, and achieved almost four-times the fade resistance performance of the previous generation Focus ST in testing.
      The C2 architecture’s Electric Brake Booster (EBB) further demonstrates its advantages in the Focus ST application. The technology builds brake pressure faster than a hydraulic system for a more connected, confident and consistent pedal feel across a broader range of operating conditions. For the Focus ST, this means the system can both mitigate for changes in braking behaviour experienced during high performance driving, and can adjust the braking feel and dynamics to match the selected Drive Mode.
      In addition, Slippery/Wet, Normal, Sport and – for models equipped with the Performance Pack – Track Drive Modes adjust eLSD, CCD, EPAS, throttle mapping, automatic transmission shift scheduling, electronic stability control, electronic sound enhancement (ESE) and climate settings to suit the driving scenario. A dedicated “Sport” button on the flat-bottomed steering wheel gives direct access to Sport mode, and an additional “Mode” button allows drivers to quickly scroll through the Drive Mode options.
      “Selecting Track mode instantly makes braking response more direct and edgy; introduces higher steering efforts for more feedback; tunes the throttle to be more aggressive; instructs the eLSD to deliver maximum traction; and gives drivers more leeway within the ESC system,” said David Put, Ford Performance vehicle dynamics. “Drivers can have full confidence in the Focus ST’s ability to deliver on the track.”
      The traditional Focus ST gauge cluster benefits from a contemporary execution inspired by the Ford GT supercar. Digital turbocharger boost pressure, oil pressure and oil temperature gauges are now displayed in a bespoke Ford Performance screen on the 4.2-inch, TFT colour instrument display. Launch Control for consistently fast standing starts on track is also delivered via the Performance Pack for 2.3-litre EcoBoost models.
      Developed for form and function
      Developed to be as comfortable as it is fun-to-drive, the all-new Focus ST exploits the class-leading roominess and exceptional refinement of the standard Focus range, and features an upscale interior that balances everyday practicality and a true sporty driving experience.
      Ford Performance engineers fine-tuned the positioning of supportive Recaro front seats to complement the connected and in-control feel for the driver, while ESE technology amplifies genuine engine and exhaust noise in Sport and Track modes – heightening the sports driving sensation and delivering additional feedback to assist performance drivers.
      Tuned engine mounts and an isolated subframe – alongside available CCD technology – increase refinement for all occupants. Generous front shoulder room and best-in-class rear knee clearance combine with maximum 1,653-litre wagon luggage capacity and a boot space that can comfortably accommodate a large dog crate, for maximum comfort and practicality.
      In addition to the sports steering wheel and Ebony coloured Recaro seats with a choice of high-quality cloth, leather, or partial leather and Miko Dinamica materials, the unique Focus ST interior intensifies the sporty atmosphere with an ST-embossed aluminium gear knob and scuff plates; alloy pedals; metallic hexagonal and satin silver decorative elements; and metal grey stitching for the seats, door inserts and centre console soft side pads.
      The Focus ST builds on the premium, sporting Focus silhouette with subtle, functional styling changes and unique alloy wheel designs. Revised upper and lower front grille designs are optimised for increased cooling capability, and bold signature lower wing elements channel air in to the air-curtain inlets for improved aerodynamic performance.
      A larger, more steeply angled rear roof spoiler increases downforce to support the Focus ST’s driving dynamics. A twin exit tailpipe configuration borders the aggressively styled rear diffuser element, and improves practicality by delivering the towing capability that was prevented by the centre-exit tailpipes of the previous generation Focus ST. The Performance Pack also adds red brake callipers.
      Exterior colour options chosen to emphasise the Focus ST’s dynamic styling include exclusive Ford Performance Blue and Orange Fury, alongside Frozen White, Magnetic grey, Race Red, Ruby Red and Shadow Black. Bold alloy wheel options include 18-inch Dark Sparkle and Magnetite designs, with a 19-inch wheel also offered in Magnetite.
      The Focus ST also benefits from the comprehensive range of sophisticated Ford driver assistance technologies that have helped the all-new Focus win 13 awards and a 5-star safety rating since going on sale in 2018.
      Seamlessly integrated technologies that enable an intuitive, stress-reducing and refined driving experience include:
      Adaptive Cruise Control now enhanced with Stop & Go, Speed Sign Recognition and Lane-Centring for effortlessly negotiating stop-start traffic Ford’s Adaptive Front Lighting System with new camera-based predictive curve light and sign-based light that pre-adjust headlamp patterns for improved visibility by monitoring bends in the road and – for the first time in the industry – road signs Active Park Assist 2 that operates gear selection, acceleration and braking in addition to steering, to enable fully-automated manoeuvres at the push of a button Ford’s first Head-up display to be offered in Europe, helping drivers focus their attention on the road ahead Evasive Steering Assist, a segment-first technology that helps drivers steer around stopped or slower vehicles to help avoid collisions Ford’s SYNC 3 connectivity system allows drivers to control audio, navigation and climate functions plus connected smartphones using simple voice commands supported by an 8-inch colour touchscreen. The system provides Apple CarPlay and Android Auto™ compatibility free of charge, and available FordPass Connect embedded modem technology turns the vehicle into a mobile WiFi hotspot with connectivity for up to 10 devices
      “Our target was to deliver an all-new Focus ST that is as effortless to drive day-to-day as the rest of the Focus line-up,” Roeks said. “The model’s comprehensive range of technologies means customers gain exhilarating ST performance without sacrifice.”
      The all-new Focus ST will go on sale across Europe in summer 2019.

      View full article
    • By Drew Dowdell
      When Ford decided to pull the plug in the U.S. on all of its cars except the Mustang, it meant that the U.S. will miss out on a lot of the goodness that European markets get from the Blue Oval.  Today, more evidence of that was released in the form the the updated Ford Focus ST.
      The 2019 Focus ST gains a 2.3-liter turbo 4-cylinder, replacing the 2.0T previously offered. This motor is the same basic unit found in the Focus RS and Mustang.  The motor bumps power up to 276 HP and 310 lb-ft of torque, an increase of 24 hp and 40 lb-ft of torque over the previous car. Running from 0-62 mph (100 kph) takes under 6 seconds. 
      Diesel buyers can opt for a 2.0T diesel Focus ST rated for 187 hp and 295 lb-ft of torque.
      Drivers can choose between a 6-speed manual or an additional cost 7-speed automatic.  Power is sent solely to the front wheels through an electronic limited-slip differential.  Selectable drive modes are available with Normal, Sport, and Slippery-Wet. For manual drivers, there is a Performance pack which includes an additional Track mode plus launch control system, red brake calipers, and rev-matching. 
      The Ford Focus ST will be available in hatch or wagon version and goes on sale this summer.
      See page 2 for the full Ford Press Release







      All-New Ford Focus ST Blends Track-Day Performance, B-road Fun and Everyday Usability Without Compromise
      Ford Performance-developed all-new Focus ST enhanced with advanced sports technologies will go on sale in the summer in five-door and wagon body styles Powerful, free-revving powertrains include 280 PS, 420 Nm, 2.3-litre EcoBoost petrol with twin-scroll turbo and anti-lag; 190 PS 2.0-litre EcoBlue diesel with 400 Nm from 2,000 rpm First Ford front-wheel drive electronic limited-slip differential improves traction and stability. Rev-matching offered for short-shift six-speed manual gearbox. Seven-speed auto available Selectable Drive Modes a first for Focus ST, adjusting features including Electronic Brake Booster and fastest Ford electric power-assisted steering to match performance to scenario Comfort and driving experience optimised with Recaro sports seats and advanced independent rear suspension configuration with available Continuously Controlled Damping COLOGNE, Germany, Feb. 18, 2019 – Ford today revealed the all-new Focus ST – developed by Ford Performance to deliver nimble hot-hatchback thrills in a stylish, comfortable and practical family car.
      The all-new Focus ST builds on the class-leading driving dynamics of the fourth generation Focus in five-door and wagon body styles. Ford’s new C2 architecture is enhanced with unique suspension, braking and powertrain configurations for the most responsive and agile Focus ST driving experience ever – on road and track.
      A new engine line-up makes available to drivers up to 12 per cent more power and 17 per cent more torque compared with the previous generation Focus ST. Ford’s 280 PS 2.3-litre EcoBoost petrol and 190 PS 2.0-litre EcoBlue diesel engines* both deliver a broad spread of power and torque across the rev-range, for fast-revving sports performance.
      Ford’s first application of an electronic limited-slip differential (eLSD) for a front-wheel drive vehicle further enhances as standard the cornering and stability of the EcoBoost-powered variant – sharpening responses to changing grip levels and driver inputs using computer-controlled pre-emptive actuation.
      A choice of six-speed manual or quick-shifting new seven-speed automatic transmissions is offered, and Selectable Drive Modes technology is introduced to the Focus ST for the first time, enabling drivers to adjust the vehicle’s character to suit the driving scenario. Continuously Controlled Damping (CCD) – standard for five-door EcoBoost variants – enhances the short long arm (SLA) independent rear suspension configuration for ultimate refinement.
      “Intelligent technologies like eLSD and CCD make our all-new Focus ST the most ‘Jekyll and Hyde’ yet, able to switch from refined tourer to focussed performance car at the push of a button,” said Leo Roeks, Ford Performance director, Europe. “We’ve incorporated learnings from programmes including our Ford GT supercar and the acclaimed Focus RS to develop a mid-size performance car with a degree of flexibility that’s unique in its segment.”
      The all-new Focus ST will be manufactured with best-ever craftsmanship and quality following a €600 million investment at Ford’s Saarlouis assembly facility, Germany.
      Responsive power delivery
      A new generation of Ford’s 2.3-litre EcoBoost all-aluminium engine is the most powerful ever offered for a Focus ST. Using advanced turbocharging technology to deliver 280 PS power at 5,500 rpm and 420 Nm of torque from 3,000 rpm to 4,000 rpm, it is also the most free-revving Focus ST engine ever, and supports anticipated 0‑100 km/h (0-62 mph) acceleration in less than 6 seconds.
      Engine response is enhanced using a low-inertia twin-scroll turbocharger, which scavenges exhaust gas energy more effectively using separated channels to minimise interference between gas pulses. An electronically actuated waste-gate allows closer control of boost pressures for optimised engine performance. In addition, a unique exhaust system that reduces back pressure, bespoke air intake system and optimised intercooler further improve breathing.
      Innovative anti-lag technology developed for the Ford GT supercar and F-150 Raptor pick-up is introduced to the Focus ST, for immediate power delivery in Sport and Track Drive Modes. Anti‑lag keeps the throttle open when the driver lifts off the accelerator pedal, alleviating the reversal of air flow from the turbocharger to maintain compressor wheel speed and enabling boost pressure to build faster on demand.
      Ford’s 190 PS 2.0-litre EcoBlue is the most powerful diesel engine ever offered for a Ford Focus model, delivering peak power at 3,500 rpm and 400 Nm of torque between 2,000 rpm and 3,000 rpm – and 360 Nm from 1,500 rpm – for immediate and linear acceleration.
      A low-inertia variable geometry turbocharger; steel pistons for less expansion when hot; and an integrated intake system with innovative mirror-image porting for optimised combustion help to deliver a diesel powertrain that produces 10 per cent more power and more than twice as much torque as the 2.0‑litre Duratec ST petrol engine in the first generation Focus ST.
      The Focus ST’s six-speed manual transmission enables more urgent gear-changes and provides a sportier feel with a shift-throw reduction of 7 per cent compared with the standard all-new Focus. Ford’s new rev-matching technology that debuted on the new Ford Mustang is also introduced as part of an optional Performance Pack for 2.3-litre EcoBoost manual models.
      Delivering smoother, faster downshifts, the technology is accompanied by a shift indicator light, and uses the engine’s electronic control system to briefly “blip” the throttle as the driver engages a lower gear – matching the engine rotation speed to that of the gear that is being selected.
      Rev-matching enables less-experienced performance drivers to benefit from the seamless, momentum-maintaining gearshifts delivered by the “heel-and-toe” driving technique, while also enabling experienced performance drivers to deactivate the system if they prefer.
      A new seven-speed variant of Ford’s latest intelligent automatic transmission family complements the rewarding, engaging and sporty 2.3-litre EcoBoost driving experience. Gear differentiation is optimised for performance, and Adaptive Shift Scheduling – which assesses individual driving styles to optimise gearshift timings – is enhanced to offer more flexibility and the ability to differentiate between road and track use. Drivers can select gears manually using steering wheel-mounted paddle-shifters.
      “The EcoBoost petrol and EcoBlue diesel powertrains have unique characters, but are equally charismatic,” Roeks said. “The Focus ST’s sporty ‘pops and bangs’ soundtrack perfectly matches the car’s feisty performance and is an essential part of the ST experience.” 
      Intuitive dynamics enhanced with technology
      Building on accomplished Ford Focus driving dynamics, the new Focus ST was developed to blend B-road fun-to-drive, legitimate track-day performance, and everyday usability better than any vehicle in its class.
      The SLA suspension configuration helps optimise the vehicle’s responses to driver inputs without sacrificing comfort, and includes a unique geometry for wagon models that repositions the dampers helping the vehicle remain nimble and responsive even when fully loaded. The agile and energetic character of the standard Focus is retained using the original spring specifications, with damping stiffness increased up to 20 per cent at the front and 13 per cent at the rear, and ride height reduced by 10 mm, to improve road-holding and response in performance driving scenarios.
      Ford’s sophisticated CCD technology every 2 milliseconds monitors suspension, body, steering and braking inputs to adjust damping responses for outstanding ride quality and driving dynamics.
      The driving experience is further enhanced using eLSD technology for Focus ST 2.3 litre EcoBoost models. Incorporated into the transmission, the system uses hydraulically activated clutches to limit the engine torque delivered to a wheel that has reduced traction on the road surface, and redistributes up to 100 per cent of available torque to the wheel with more traction to counteract wheelspin that can hamper acceleration through, and out of, corners.
      The Borg Warner-developed technology is faster to deploy and offers greater precision than a traditional mechanical LSD. The system can pre-emptively adjust torque distribution using inputs from powertrain and vehicle dynamics sensors, rather than responding to wheelspin as it occurs, and can apply differential locking gradually for fine-tuning performance.
      Focus ST 2.0-litre EcoBlue models feature Torque Vectoring Control technology, which improves road holding and reduces understeer by applying brake force to the inside front wheel when cornering.
      The all-new Focus ST steals Ford’s fastest-steering-response crown from the acclaimed Fiesta ST. The electric power-assisted steering (EPAS) system is 15 per cent faster than the standard Focus, requiring just two turns lock-to-lock.
      Class-leading connected feel is supported by unique steering knuckle geometry, with a rod attachment point 9 mm further forward and 6.5 mm higher than the standard Focus for sharper responses. New Steering Torque Disturbance Reduction software for EPAS also helps reduce torque steer, making it even easier to deploy with precision the Focus ST’s power and torque via bespoke-specification Michelin Pilot Sport 4S tyres.
      Larger front and rear brake components provide the foundation for a high performance braking system with improved stopping power and fade resistance. Front disc dimensions have grown to 330 mm x 27 mm and feature dual-piston callipers. Rear discs now measure 302 mm x 11 mm. Focus ST braking performance was verified using the same demanding test procedures as the Ford GT supercar, and achieved almost four-times the fade resistance performance of the previous generation Focus ST in testing.
      The C2 architecture’s Electric Brake Booster (EBB) further demonstrates its advantages in the Focus ST application. The technology builds brake pressure faster than a hydraulic system for a more connected, confident and consistent pedal feel across a broader range of operating conditions. For the Focus ST, this means the system can both mitigate for changes in braking behaviour experienced during high performance driving, and can adjust the braking feel and dynamics to match the selected Drive Mode.
      In addition, Slippery/Wet, Normal, Sport and – for models equipped with the Performance Pack – Track Drive Modes adjust eLSD, CCD, EPAS, throttle mapping, automatic transmission shift scheduling, electronic stability control, electronic sound enhancement (ESE) and climate settings to suit the driving scenario. A dedicated “Sport” button on the flat-bottomed steering wheel gives direct access to Sport mode, and an additional “Mode” button allows drivers to quickly scroll through the Drive Mode options.
      “Selecting Track mode instantly makes braking response more direct and edgy; introduces higher steering efforts for more feedback; tunes the throttle to be more aggressive; instructs the eLSD to deliver maximum traction; and gives drivers more leeway within the ESC system,” said David Put, Ford Performance vehicle dynamics. “Drivers can have full confidence in the Focus ST’s ability to deliver on the track.”
      The traditional Focus ST gauge cluster benefits from a contemporary execution inspired by the Ford GT supercar. Digital turbocharger boost pressure, oil pressure and oil temperature gauges are now displayed in a bespoke Ford Performance screen on the 4.2-inch, TFT colour instrument display. Launch Control for consistently fast standing starts on track is also delivered via the Performance Pack for 2.3-litre EcoBoost models.
      Developed for form and function
      Developed to be as comfortable as it is fun-to-drive, the all-new Focus ST exploits the class-leading roominess and exceptional refinement of the standard Focus range, and features an upscale interior that balances everyday practicality and a true sporty driving experience.
      Ford Performance engineers fine-tuned the positioning of supportive Recaro front seats to complement the connected and in-control feel for the driver, while ESE technology amplifies genuine engine and exhaust noise in Sport and Track modes – heightening the sports driving sensation and delivering additional feedback to assist performance drivers.
      Tuned engine mounts and an isolated subframe – alongside available CCD technology – increase refinement for all occupants. Generous front shoulder room and best-in-class rear knee clearance combine with maximum 1,653-litre wagon luggage capacity and a boot space that can comfortably accommodate a large dog crate, for maximum comfort and practicality.
      In addition to the sports steering wheel and Ebony coloured Recaro seats with a choice of high-quality cloth, leather, or partial leather and Miko Dinamica materials, the unique Focus ST interior intensifies the sporty atmosphere with an ST-embossed aluminium gear knob and scuff plates; alloy pedals; metallic hexagonal and satin silver decorative elements; and metal grey stitching for the seats, door inserts and centre console soft side pads.
      The Focus ST builds on the premium, sporting Focus silhouette with subtle, functional styling changes and unique alloy wheel designs. Revised upper and lower front grille designs are optimised for increased cooling capability, and bold signature lower wing elements channel air in to the air-curtain inlets for improved aerodynamic performance.
      A larger, more steeply angled rear roof spoiler increases downforce to support the Focus ST’s driving dynamics. A twin exit tailpipe configuration borders the aggressively styled rear diffuser element, and improves practicality by delivering the towing capability that was prevented by the centre-exit tailpipes of the previous generation Focus ST. The Performance Pack also adds red brake callipers.
      Exterior colour options chosen to emphasise the Focus ST’s dynamic styling include exclusive Ford Performance Blue and Orange Fury, alongside Frozen White, Magnetic grey, Race Red, Ruby Red and Shadow Black. Bold alloy wheel options include 18-inch Dark Sparkle and Magnetite designs, with a 19-inch wheel also offered in Magnetite.
      The Focus ST also benefits from the comprehensive range of sophisticated Ford driver assistance technologies that have helped the all-new Focus win 13 awards and a 5-star safety rating since going on sale in 2018.
      Seamlessly integrated technologies that enable an intuitive, stress-reducing and refined driving experience include:
      Adaptive Cruise Control now enhanced with Stop & Go, Speed Sign Recognition and Lane-Centring for effortlessly negotiating stop-start traffic Ford’s Adaptive Front Lighting System with new camera-based predictive curve light and sign-based light that pre-adjust headlamp patterns for improved visibility by monitoring bends in the road and – for the first time in the industry – road signs Active Park Assist 2 that operates gear selection, acceleration and braking in addition to steering, to enable fully-automated manoeuvres at the push of a button Ford’s first Head-up display to be offered in Europe, helping drivers focus their attention on the road ahead Evasive Steering Assist, a segment-first technology that helps drivers steer around stopped or slower vehicles to help avoid collisions Ford’s SYNC 3 connectivity system allows drivers to control audio, navigation and climate functions plus connected smartphones using simple voice commands supported by an 8-inch colour touchscreen. The system provides Apple CarPlay and Android Auto™ compatibility free of charge, and available FordPass Connect embedded modem technology turns the vehicle into a mobile WiFi hotspot with connectivity for up to 10 devices
      “Our target was to deliver an all-new Focus ST that is as effortless to drive day-to-day as the rest of the Focus line-up,” Roeks said. “The model’s comprehensive range of technologies means customers gain exhilarating ST performance without sacrifice.”
      The all-new Focus ST will go on sale across Europe in summer 2019.
    • By Drew Dowdell
      The folks over at Hagerty found something interesting on the NHTSA website the other day, a VIN decoder ring that shows a second 2.3 liter 4-cylinder turbo with a horsepower rating of TBD.   Ford dropped the V6 in the base Mustang after 2018 deciding the Turbo-4 was enough, but crosstown rival Chevy kept their V6 going alongside their 275 horsepower 2.0T.  While Ford's 2.3T beats the Chevy Turbo in power, it comes up short against Chevy's V6.  With this finding, it looks like Ford is going try to rectify the deficit.
      Given that a similar 2.3T is good for 350 hp in the Focus RS, Ford should be able to easily surpass the 335 horsepower the Camaro V6 produces.  A statement from a Ford representative declined to give details but said that we would have exciting news about Mustang in Spring 2019.
       

      View full article
    • By Drew Dowdell
      The folks over at Hagerty found something interesting on the NHTSA website the other day, a VIN decoder ring that shows a second 2.3 liter 4-cylinder turbo with a horsepower rating of TBD.   Ford dropped the V6 in the base Mustang after 2018 deciding the Turbo-4 was enough, but crosstown rival Chevy kept their V6 going alongside their 275 horsepower 2.0T.  While Ford's 2.3T beats the Chevy Turbo in power, it comes up short against Chevy's V6.  With this finding, it looks like Ford is going try to rectify the deficit.
      Given that a similar 2.3T is good for 350 hp in the Focus RS, Ford should be able to easily surpass the 335 horsepower the Camaro V6 produces.  A statement from a Ford representative declined to give details but said that we would have exciting news about Mustang in Spring 2019.
       
    • By William Maley
      The Ford Ranger is beginning to hit dealers, but it has already been hit with a recall.
      Ford announced today that 3,500 Rangers in North America (3,000 in the U.S. and 500 in Canada) have an issue with the PRNDL bezel wiring, The problem deals with the wiring interfering with the shifter interlock override, preventing the transmission from locking when put into park. This means you can shift it out of park when the vehicle is off and without a foot on the brake.
      Ford says that it is unaware of any accidents or injuries arising from this issue. The trucks involved were built between June 4, 2018 and Jan. 9, 2019.
      Dealers will investigate whether or not the truck does shift out of park when it is turned off, and without a foot on the brake. If it does, then dealers will relocate the harness and perform the test.
      Source: Ford


      Ford Motor Company Issues Recall For Select 2019 Ranger Vehicles To Verify Shifter Interlock Functionality
      DEARBORN, Mich., Feb. 6, 2019 – Ford is issuing a safety compliance recall on certain 2019 Ford Ranger vehicles to verify shifter interlock functionality. In the affected vehicles, the PRNDL bezel wiring may interfere with the shifter interlock override, preventing the shifter from locking in the park position and allowing the driver to shift the transmission out of park with the vehicle off and without a foot on the brake pedal.
      Ford is not aware of any accidents or injuries resulting from this condition.
      This action affects approximately 3,500 Ranger vehicles in North America, including approximately 3,000 in the United States and 500 in Canada. 
      Affected 2019 Ranger vehicles were built at Michigan Assembly Plant, June 4, 2018 to Jan. 9, 2019.
      Dealers will verify shifter interlock functionality by attempting to move the transmission shifter out of park with the vehicle off and without a foot on the brake pedal. If the shifter moves out of park, dealers will look for wiring interference, relocate the wiring and retest. The Ford reference number for this recall is 19C02.

      View full article
  • My Clubs

  • Recently Browsing

    No registered users viewing this page.

  • Reader Rides

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×