Jump to content
  • Greetings Guest!

    CheersandGears.com was founded in 2001 and is one of the oldest continuously operating automotive forums out there.  Come see why we have users who visit nearly every day for the past 16+ years. Signup is fast and free, or you can opt for a premium subscription to view the site ad-free.

William Maley

2018 Ford Fiesta ST, Now With Three-Cylinder Power!: Comments

Recommended Posts


Ford has ripped off the sheet of the next-generation Fiesta ST that will make its official debut next month at the Geneva Motor Show. 

The big news is what lies under the ST's hood. A new 1.5L EcoBoost three-cylinder produces 197 horsepower and 214 pound-feet of torque. This is a noticeable increase from the current Fiesta ST sold in Europe as it only produces 180 horsepower and 177 pound-feet of torque from a 1.6L EcoBoost four. Paired with a six-speed manual, the Fiesta ST hits 60 mph in 6.7 seconds - 0.2 seconds faster than the outgoing model.

The new three-cylinder also comes with cylinder-deactivation. Under light loads, the engine can run on just two-cylinders to save fuel.

Another big change is the introduction of three driving modes - Normal, Sport, and Track. The modes alters the response of the engine and throttle; steering, stability control, and exhaust sound. (Yes, the new Fiesta ST comes with a sound enhancement system). Torque vectoring is standard and will help reduce understeer when entering a corner.

The European market will get the choice of three and five-door body styles of the ST. It is quite the looker up front with the new mesh grille and reshaped headlights. The same cannot be said for the back which looks a bit boring. Inside, there are a set of Recaro seats to hold you and a passenger in during enthusiastic driving. Other items of note include a flat-bottom steering wheel and a 8-inch touchscreen featuring SYNC 3.

Ford says the Fiesta ST will go on sale in Europe early next year. There's no word on if and when the Fiesta ST (or for that matter the Fiesta itself) will come to the U.S.

Source: Ford
Press Release is on Page 2


Next-Gen Ford Fiesta ST Debuts 200PS, Three-Cylinder, 1.5-Litre EcoBoost Engine and Drive Modes

  • Ford Performance reveals next generation Ford Fiesta ST powered by an all-new 200PS, three-cylinder, 1.5‑litre EcoBoost engine at the Geneva Motor Show
  • First three-cylinder Ford Performance model also features Drive Modes that adjust engine, steering, stability controls and even exhaust sound for optimised driving fun
  • Electronic Sound Enhancement and active exhaust valve amplify sporty sound of three-cylinder engine that also features cylinder deactivation for further reduced CO2*
  • Enhanced range of personalisation options and technology includes newstyling packs, SYNC 3 connectivity with eight-inch touchscreen and B&O Play high-end audio

BRENTWOOD, UK, Feb. 24, 2017 – Ford Performance today announced the next generation Ford Fiesta ST, powered by an all-new three-cylinder, 1.5-litre EcoBoost engine.

Shown for the first time ahead of its global public debut at the Geneva Motor Show next month, the next‑generation Fiesta ST will deliver 200PS, 290Nm of torque and anticipated 0‑62mph acceleration in 6.7sec.

The third generation of Fiesta ST will be the first ever Ford Performance model powered by a three-cylinder engine, and the first Fiesta ST to feature selectable Drive Modes – enabling engine, steering and stability controls to be configured to Normal, Sport and Track settings for an optimised fun-to-drive experience in conditions from motorways to track days.

Drive Modes will also adjust Fiesta ST’s Electronic Sound Enhancement (ESE) technology and active exhaust noise control valve to deliver an even more satisfying driving experience. The technologies amplify the naturally sporty sound of the new 1.5-litre EcoBoost engine that also features Ford’s industry-first cylinder deactivation system for a three-cylinder engine, for further reduced CO2 emissions of an anticipated 114g/km.*

Available from launch in early 2018 in both three-door and five-door bodystyles, the next generation Fiesta ST will be offered with a greater variety of interior trim and personalisation options than ever before, with bold and distinctive exterior styling that includes a unique race-car-inspired mesh grille and exclusive 18in alloy wheels.

“Our next generation Fiesta ST is true to the philosophy of delivering cutting-edge technology to enhance every facet of the responsive Ford Performance chassis and powertrain,” said Joe Bakaj, vice president, Product Development, Ford of Europe. “With selectable Drive Modes and an all-new EcoBoost engine delivering an unprecedented combination of performance and fuel-efficiency, the new model will deliver the most versatile, fun, engaging and rewarding Fiesta ST driving experience yet.”

All-new 1-5-litre EcoBoost engine

Part of Ford’s EcoBoost range of petrol engines that also includes the multi-award-winning 1.0‑litre EcoBoost, the all-new 1.5-litre EcoBoost engine uses technology including turbocharging, high-pressure fuel injection and Twin-independent Variable Cam Timing to deliver optimised performance and fuel efficiency.

The engine’s three-cylinder architecture delivers naturally high torque at low rpm. Performance is further boosted by a new turbocharger that uses an optimised turbine design to build boost pressure faster and minimise lag for a more responsive and fun driving experience.

A new combination of port fuel injection and direct fuel injection technology helps deliver high power and responsiveness alongside reduced CO2 emissions,* with a particular increase in fuel efficiency under light engine loads.

Ford’s new cylinder deactivation technology – first announced for the 1.0-litre EcoBoost engine and a world first for a three-cylinder engine – will further improve fuel efficiency for Fiesta ST customers without affecting performance by automatically stopping fuel delivery and valve operation for one of the engine’s cylinders in conditions where full capacity is not needed, such as when coasting or cruising with light demand on the engine. The technology can disengage or re-engage one cylinder in 14 milliseconds – 20 times faster than the blink of an eye – to seamlessly deliver full performance on demand.

The all-aluminium engine also features an integrated exhaust manifold thatimproves efficiency by helping the engine reach optimal temperatures faster, and delivers torque more rapidly by minimising the distance exhaust gasses travel between cylinders and turbocharger. Gas particulate filter technology that reduces soot emissions will also feature.

New Drive Modes

Selectable Drive Modes add even more versatility for the next generation Fiesta ST, enabling drivers to optimise the driving experience to suit scenarios from school run to the race track:

  • In Normal mode, engine mapping, traction control, electronic stability control (ESC), ESE, exhaust sound and electronic power assisted steering (EPAS) are configured to deliver natural responsiveness and a connected feel
  • In Sport mode, engine mapping and throttle pedal response are sharpened, and EPAS settings adjusted to deliver more feedback and finer control for fast road driving. The active noise control valve opens and ESE is adjusted to intensify the sporty exhaust note and engine noise within the cabin
  • In Track mode, all vehicle dynamics features are tuned for the fastest possible lap times, traction control is disabled and ESC interventions are set to wide-slip mode for hard circuit driving 

The agile and responsive Ford Performance-tuned chassis will be supported by enhanced Torque Vectoring Control technology that improves road holding and reduces understeer by applying brake force to the inside front wheel when cornering. Three-mode ESC will enable drivers to choose between full system intervention; wide-slip mode with limited intervention; and full system de-activation.

Greater personalisation

The next generation Fiesta ST will offer more personalisation options than ever before. Customers will be able to choose from a range of trim elements for the gear lever, steering wheel, door pulls and decorative dashboard spear, and select from distinctive styling packs.

The ergonomic Fiesta ST interior will feature supportive Recaro seats and a flat-bottomed steering wheel. Exterior colour options will include new Liquid Blue and the Fiesta ST will feature exclusive 18in alloy wheels.

“Our ST models are designed to make a Ford Performance driving experience accessible to customers regardless of lifestyle,” said Matthias Tonn, Fiesta ST chief programme engineer. “With three- and five-door bodystyles and distinctive styling options that complement the model’s performance characteristics available from day-one, the next generation Fiesta ST will deliver a broader appeal for an even wider range of car-buyers.”

Ford’s SYNC 3 communications and entertainment system will enable Fiesta ST drivers to control audio, navigation and connected smartphones using simple, conversational voice commands. Compatible with Apple CarPlay and Android Auto™, SYNC 3 is supported by floating, tablet-inspired touchscreens up to eight inches in size that can be operated using pinch and swipe gestures.

The next generation Fiesta ST also will be offered with a high quality B&O PLAY Sound System for a high-end audio experience – among features Ford first announced last year for the next generation Fiesta.


View full article

Share this post


Link to post
Share on other sites

So a 1.5L 3 banger to undercut tax's and yet I have not been impressed with the cylinder deactivation feature on any of the various auto companies. I am not seeing the benefit that marketing is bragging about.

Share this post


Link to post
Share on other sites
20 minutes ago, Stew said:

So, it wasn't a typo yesterday.  :D  Interesting sounding. 

Very interesting going with a three banger for this but the specs are impressive.

 

It also seems like some are a little quick trying to correct folks when they did not check first to see if it was, in fact, incorrect. I'm sure there's a meme for this lol. 

  • Upvote 1

Share this post


Link to post
Share on other sites

I think it looks GREAT for a sub compact. And those wheels...those wheels look great to me.

I HOPE this little 3 pot sounds similar to a motorcycle 3cyl because I LOVE those sounds.

Share this post


Link to post
Share on other sites

Nice looking Hatch, I wish the back did not cut down loosing interior room and especially headroom in the back. Like the LED outline of the headlights.

The little one can see on the interior shows the seats to be thick and well supported, makes me wonder just how much space is in the back seat?

I do wonder how many of the LCD screen will be broken off as it sticks up and I can see people going to adjust the rearview mirror and hitting the screen and breaking it backwards.

Share this post


Link to post
Share on other sites

Car looks great. I'd prefer sticking with an I4 myself, but if the performance and drivability is there, then hey.

 

That said, can we please stop calling brake-based artificial LSD's 'torque vectoring'? They are not the same thing, and should not be called as such. It's gimmicky marketing. These setups are totally inferior to a proper LSD.

  • Upvote 1

Share this post


Link to post
Share on other sites
1 hour ago, Cmicasa the Great said:

Nice power bump considering, but is there any benefit in going 3 cylinder vs 4

Fewer parts, cheaper to manufacture?  Looks like the Fiesta line is going to be all 3 cyl except for the diesel, at least in Europe..

 

 
Engine
Edited by Cubical-aka-Moltar

Share this post


Link to post
Share on other sites

Fantastic looker.  Ford is sadistic, showing us the 3-door when it is likely we will not be allowed to buy it in Ford's home country.  A 3-cylinder engine has a nice growl to it.

Share this post


Link to post
Share on other sites

Your content will need to be approved by a moderator

Guest
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Who's Online   2 Members, 0 Anonymous, 13 Guests (See full list)



  • Similar Content

    • By William Maley
      Ford's original plan for the GT was to build the model for two years, with 250 units being built each year. Then Ford extended the production run to four years and expanded the total number of vehicles built to 1,000. So how is Ford doing on their production targets for the GT? According to Motor Authority, they haven't gone as planned.
      This information was first brought to light by a GT message board claiming Ford didn't reach their 250 unit goal for 2017. Motor Authority reached out to Ford and a spokesman confirmed that only 137 GTs were built last year. Why the delay?
      "This is a hand-built supercar, which we are committed to deliver flawlessly. We built into our process an extended ramp-up due to several factors such as global homologation testing and supplier constraints," the spokesman said in a statement.
      Multimatic, the company that is building the GT for Ford explained they "hadn't built cars on this scale before" and it them some time to meet its goal of building one car per work day. The company only reached this goal in the middle of last year. Issues with suppliers and minor issues also played a role. Multimatic did say that everything is on schedule for the full run of 250 vehicles for 2018.
      At the current pace, this would only mean Ford would produce 888 Its, 112 units short from their original goal. The Ford spokesman said they are sticking with their goal of 1,000 vehicles. This likely means Ford will extend production one more year to meet it.
      Source: Motor Authority

      View full article
    • By William Maley
      Ford's original plan for the GT was to build the model for two years, with 250 units being built each year. Then Ford extended the production run to four years and expanded the total number of vehicles built to 1,000. So how is Ford doing on their production targets for the GT? According to Motor Authority, they haven't gone as planned.
      This information was first brought to light by a GT message board claiming Ford didn't reach their 250 unit goal for 2017. Motor Authority reached out to Ford and a spokesman confirmed that only 137 GTs were built last year. Why the delay?
      "This is a hand-built supercar, which we are committed to deliver flawlessly. We built into our process an extended ramp-up due to several factors such as global homologation testing and supplier constraints," the spokesman said in a statement.
      Multimatic, the company that is building the GT for Ford explained they "hadn't built cars on this scale before" and it them some time to meet its goal of building one car per work day. The company only reached this goal in the middle of last year. Issues with suppliers and minor issues also played a role. Multimatic did say that everything is on schedule for the full run of 250 vehicles for 2018.
      At the current pace, this would only mean Ford would produce 888 Its, 112 units short from their original goal. The Ford spokesman said they are sticking with their goal of 1,000 vehicles. This likely means Ford will extend production one more year to meet it.
      Source: Motor Authority
    • By William Maley
      The Ford Fusion will be going away in due course as part of the company's plan to put more focus on utility vehicles and trucks. But that doesn't mean the Fusion name will heading to the trash bin.
      Bloomberg has learned from sources that Ford is planning to move the Fusion name to a new wagon that will compete with the Subaru Outback. The new model will also use the same mechanical underpinnings as the current Fusion - leading us to believe that it will be some version of the Mondeo wagon sold in Europe. Ford spokesman Mike Levine declined to comment on the new model, but did say the Fusion name would continue "because of its awareness, positive imagery and value with consumers.”
      Ford needs a way to keep their current sedan buyers returning their showroom after the Fusion sedan drops out. Analysis done by Kelly Blue Book revealed the less than half of Fusion owners are loyal to the brand. KBB also found that the Honda CR-V and Toyota RAV4 were the most popular SUV models that Fusion owners would consider.
      “Ford has a hard time moving people from their cars to SUVs,” said Michelle Krebs, a senior analyst with Autotrader.
      Source: Bloomberg (Subscription Required)

      View full article
    • By William Maley
      The Ford Fusion will be going away in due course as part of the company's plan to put more focus on utility vehicles and trucks. But that doesn't mean the Fusion name will heading to the trash bin.
      Bloomberg has learned from sources that Ford is planning to move the Fusion name to a new wagon that will compete with the Subaru Outback. The new model will also use the same mechanical underpinnings as the current Fusion - leading us to believe that it will be some version of the Mondeo wagon sold in Europe. Ford spokesman Mike Levine declined to comment on the new model, but did say the Fusion name would continue "because of its awareness, positive imagery and value with consumers.”
      Ford needs a way to keep their current sedan buyers returning their showroom after the Fusion sedan drops out. Analysis done by Kelly Blue Book revealed the less than half of Fusion owners are loyal to the brand. KBB also found that the Honda CR-V and Toyota RAV4 were the most popular SUV models that Fusion owners would consider.
      “Ford has a hard time moving people from their cars to SUVs,” said Michelle Krebs, a senior analyst with Autotrader.
      Source: Bloomberg (Subscription Required)
    • By William Maley
      Ford's latest ST model, the 2019 Edge ST will be arriving at dealers later this summer with a base price of $43,350 (including destination). According to CarsDirect, the ST is $1,585 more expensive than the Edge Sport it replaces. But you're getting more car for the money.
      To begin, the Edge ST has a 2.7L EcoBoost V6 producing 335 horsepower and 380 pound-feet of torque. The Sport's 2.7L EcoBoost only produced 315 hp and 350 lb-ft. There's also a new eight-speed automatic with rev-matching, retuned suspension, and a more aggressive body kit.
      An optional Performance Brake Package that brings forth larger brake rotors and red calipers will add $2,695 to the base price. But as CarsDirect notes, you'll need to add Equipment Group 401A to get the brake package. 401A includes a number of comfort and convenience features such as heated and ventilated front seats; 180-degree camera, hands-free liftgate, navigation, and Ford's CoPilot+ suite of driver aids for an additional $5,585.
      Source: CarsDirect

      View full article
  • My Clubs

  • Recently Browsing

    No registered users viewing this page.

  • Reader Rides

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.