Jump to content

Recommended Posts

FCA US Reports June 2018 Sales

  • FCA reports best June retail sales in 14 years
  • Jeep® brand reports its best month of June sales ever, up 19 percent
  • Ram Truck brand posts best June sales ever, up 6 percent
  • Jeep Cherokee reports best month of sales ever, up 89 percent

July 3, 2018 , Auburn Hills, Mich. - FCA US LLC today reported June 2018 sales of 202,264 vehicles, an 8 percent increase compared with sales in June 2017 of 187,348 vehicles.
 
Overall sales were bolstered by both the Jeep® and Ram Truck brands, which reported significant increases for the month. FCA retail sales came in at 155,208, marking the best June sales since 2004 when sales reached 155,663 vehicles. Fleet accounted for 23 percent of total sales, a 1 percent decline from the previous year.
 
Jeep Brand
Jeep brand notched its best month of June sales ever with 86,989 vehicles sold compared with 73,153 in June 2017. Driving the results were the Cherokee, Compass and Wrangler nameplates. Cherokee and Compass sales nearly doubled, with Cherokee reporting 22,433 vehicle sales compared with 11,895 in June 2017. Compass sales were 15,142 compared with 8,311 in June 2017. Wrangler sales increased to 23,110 vehicles compared with 18,839 in June 2017.
 
Ram Truck Brand
Ram Truck brand scored a variety of records as sales increased 6 percent to 51,729 vehicles, making it the best June sales ever. Ram brand retail sales also had their best June ever, rising 4 percent to 36,750. Driving the increase was Light-Duty pickup truck retail sales, which rose 11 percent to 24,036 vehicles. Total sales of the Ram ProMaster van nearly doubled to 6,996 vehicles.  
 
Chrysler Brand
Chrysler brand total sales declined 32 percent in June to 13,484 vehicles compared with June of the previous year.
 
Dodge Brand
Dodge brand total sales rose 9 percent to 46,387 as Charger sales rose 4 percent to 6,640 vehicles compared with 6,379 vehicles in June 2017.    
 
FIAT Brand
Sales of Fiat declined 36 percent to 1,426 vehicles. 
 
Alfa Romeo Brand
Alfa Romeo brand sales of 2,249 vehicles were up significantly compared with the same month a year ago. Stelvio led the brand with 1,231 vehicle sales, followed by Giulia at 979 vehicles. 

FCA June 2018.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Social Stream

  • Similar Content

    • By dfelt
      Your probably thinking, did I read the teaser right? Did it really say 2,581 lb-ft of torque or 3,500 NM from a 160 horsepower or 120 kW motor with torque vectoring?
      Yes, Yes you did! 
      GKN Automotive is proud to unveil the world's first battery electric vehicle (BEV) with a two-speed transmission and torque vectoring. GTD19 demonstrator vehicle is built from a Jeep Renegade and is currently in Arjeplog, Sweden undergoing winter testing. To prove the industry-leading standards of efficiency, safety and driving dynamics in this BEV model, GKN choose to go with a FWD version where torque vectoring can provide noticeable benefits than in a rear wheel drive or all-wheel drive platform. To Quote GKN:
      Why a two-speed gearbox? The setup in the GTD19 is engineered to ensure the shifts are seamless, with minimal loss of power and torque while providing faster acceleration and higher top speed with improved efficiency. What is the top speed you ask? The eTwinsterX allows a top speed of 155 mph or 250 kph.
      To quote Hannes Prenn, COO of GKN ePowertrain:
      The all new eTwinster powertrain can be easily adapted and integrated into existing vehicle platform for FWD, RWD or AWD configurations. Twinster torque vectoring delivers swift and smooth acceleration while providing greater lateral control and optimized driving dynamics. GKN has stated their eTwinster system is smaller than many equivalent systems from competitors allowing it to be easily integrated into existing vehicle plate forms as they did with the GTD19 replacing it's ICE powertrain. The small size allowed GKN to install in place of the ICE, the complete solution of electric motor, inverter controls, eAxle along with all required cabling leading to a very thin battery pack underneath the GTD19.
      GKN system integration allows them to offer the eTwinster powertrain as a readily adaptable solution for all types of auto's from all-wheel drive hypercars to plug-in hybrid luxury SUVs to entry-level city cars.
      If you have ever been in a Range Rover Evoque Hybrid, then you have already experienced the Twinster system as it can be added to the Hybrid solution with the Twinster unit in the back helping to improve the dynamics and calibration of the auto. This GKN solution will also show up in the Opel Insignia. To quote GKN:

      Where else will you see this amazing system that was the number one hybrid / electric vehicle system shown at the Geneva Auto show this year is in the BMW M3 Concept, Volvo XC90 demonstrator which will be paired with the T8 Twin Engine Plug-in Hybrids as well as Mercedes-Benz AMB GLA45 prototype.
       
       

      View full article
    • By dfelt
      Your probably thinking, did I read the teaser right? Did it really say 2,581 lb-ft of torque or 3,500 NM from a 160 horsepower or 120 kW motor with torque vectoring?
      Yes, Yes you did! 
      GKN Automotive is proud to unveil the world's first battery electric vehicle (BEV) with a two-speed transmission and torque vectoring. GTD19 demonstrator vehicle is built from a Jeep Renegade and is currently in Arjeplog, Sweden undergoing winter testing. To prove the industry-leading standards of efficiency, safety and driving dynamics in this BEV model, GKN choose to go with a FWD version where torque vectoring can provide noticeable benefits than in a rear wheel drive or all-wheel drive platform. To Quote GKN:
      Why a two-speed gearbox? The setup in the GTD19 is engineered to ensure the shifts are seamless, with minimal loss of power and torque while providing faster acceleration and higher top speed with improved efficiency. What is the top speed you ask? The eTwinsterX allows a top speed of 155 mph or 250 kph.
      To quote Hannes Prenn, COO of GKN ePowertrain:
      The all new eTwinster powertrain can be easily adapted and integrated into existing vehicle platform for FWD, RWD or AWD configurations. Twinster torque vectoring delivers swift and smooth acceleration while providing greater lateral control and optimized driving dynamics. GKN has stated their eTwinster system is smaller than many equivalent systems from competitors allowing it to be easily integrated into existing vehicle plate forms as they did with the GTD19 replacing it's ICE powertrain. The small size allowed GKN to install in place of the ICE, the complete solution of electric motor, inverter controls, eAxle along with all required cabling leading to a very thin battery pack underneath the GTD19.
      GKN system integration allows them to offer the eTwinster powertrain as a readily adaptable solution for all types of auto's from all-wheel drive hypercars to plug-in hybrid luxury SUVs to entry-level city cars.
      If you have ever been in a Range Rover Evoque Hybrid, then you have already experienced the Twinster system as it can be added to the Hybrid solution with the Twinster unit in the back helping to improve the dynamics and calibration of the auto. This GKN solution will also show up in the Opel Insignia. To quote GKN:

      Where else will you see this amazing system that was the number one hybrid / electric vehicle system shown at the Geneva Auto show this year is in the BMW M3 Concept, Volvo XC90 demonstrator which will be paired with the T8 Twin Engine Plug-in Hybrids as well as Mercedes-Benz AMB GLA45 prototype.
       
       
    • By Drew Dowdell
      During an announcement that FCA will be building a new manufacturing plant in Detroit, FCA let it known that in addition to the forthcoming full-size Wagoneer and Grand Wagoneer SUVs, another new 3-row SUV was in the works for Jeep.   Auto Express UK reports today that this new SUV will technically be a 3-row version of the Grand Cherokee, but Jeep President and FCA Boss Mike Manley thinks it will not wear the Grand Cherokee name, instead taking on an new moniker.  His reasoning for not re-using the name is that the Grand Cherokee is such an iconic name and image. It would be like if Jeep dramatically changed the Wrangler, he'd face a customer revolt. 
      The last 3-row SUV Jeep sold was the 2006 - 2010 Jeep Commander. Jeep currently uses the Commander name on the Grand Commander, based on the smaller Cherokee, as a China-Only model. 
      Manley says that the segment the Grand Cherokee plays in covers both 2-row and 3-row SUVs, so the Grand Cherokee has only been covering about 40% of the potential market. Moving into this segment would allow Jeep to compete more directly with the Ford Explorer, Toyota Highlander, and Honda Pilot.
      FCA already sells a vehicle in the 3-row segment with the Dodge Durango which also rides on the same platform as the Jeep Grand Cherokee.  No future plans have been announced for the Dodge Durango, so it could be that this Jeep will take over for the Durango in the FCA lineup.
      FCA hopes to break ground on it's new facility by the end of 2nd quarter 2019 and have the first of the new 3-row SUVs rolling off the line by the end of 2020 as 2021 models.
      Related:
      Quick Drive: 2018 Jeep Grand Cherokee SRT Trackhawk

      View full article
    • By Drew Dowdell
      During an announcement that FCA will be building a new manufacturing plant in Detroit, FCA let it known that in addition to the forthcoming full-size Wagoneer and Grand Wagoneer SUVs, another new 3-row SUV was in the works for Jeep.   Auto Express UK reports today that this new SUV will technically be a 3-row version of the Grand Cherokee, but Jeep President and FCA Boss Mike Manley thinks it will not wear the Grand Cherokee name, instead taking on an new moniker.  His reasoning for not re-using the name is that the Grand Cherokee is such an iconic name and image. It would be like if Jeep dramatically changed the Wrangler, he'd face a customer revolt. 
      The last 3-row SUV Jeep sold was the 2006 - 2010 Jeep Commander. Jeep currently uses the Commander name on the Grand Commander, based on the smaller Cherokee, as a China-Only model. 
      Manley says that the segment the Grand Cherokee plays in covers both 2-row and 3-row SUVs, so the Grand Cherokee has only been covering about 40% of the potential market. Moving into this segment would allow Jeep to compete more directly with the Ford Explorer, Toyota Highlander, and Honda Pilot.
      FCA already sells a vehicle in the 3-row segment with the Dodge Durango which also rides on the same platform as the Jeep Grand Cherokee.  No future plans have been announced for the Dodge Durango, so it could be that this Jeep will take over for the Durango in the FCA lineup.
      FCA hopes to break ground on it's new facility by the end of 2nd quarter 2019 and have the first of the new 3-row SUVs rolling off the line by the end of 2020 as 2021 models.
      Related:
      Quick Drive: 2018 Jeep Grand Cherokee SRT Trackhawk
    • By Drew Dowdell
      The Chrysler Pacifica is often considered the best of a very small market.  There are only five mini-vans left on the market, and only one of those has all-wheel drive optional, the Toyota Sienna.
      That stat could be changing if rumors about the Chrysler Pacifica prove true.  According to Automotive News, Chrysler is hard at work on an AWD option for the Pacifica.  While not officially confirmed by Chrysler, the union chief for the Windsor plant where Pacifica is built appears to have spilled the beans. If AWD does come to the Pacifica, it may not be until the 2021 model year.
      Adding AWD would be likely help to boost sales in the North East US and in Canada. Chrysler moved 118k Pacificas in 2018 vs. 151k Dodge Caravans which sell at a lower price. Combined, the two minivans are 56% of the total minivan market. 

      View full article
  • My Clubs

  • Recently Browsing

    No registered users viewing this page.

  • Reader Rides

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×
×
  • Create New...