Jump to content
William Maley

Chevrolet News:Chevrolet Colorado ZR2 Becomes Burlier With Bison

Recommended Posts


Back in the spring, we reported that Chevrolet and American Expedition Vehicles (AEV) would taking the Colorado ZR2 AEV concept shown at SEMA last November into production. It would be named Bison. Today, Chevrolet and AEV have unveiled the production Bison.

Beginning with a base ZR2, the Bison swaps the front grille, adds a tougher front bumper with integrated winch, a rear bumper with recovery hook-ups, and a set of 17 x 8-inch aluminum wheels wrapped in Goodyear Wrangler Duratrac off-road tires. Underneath, AEV designed five skid plates made out of Boron steel to protect various mechanical bits. The snorkel seen in the photos is available as an option.

“As this is the first Chevrolet vehicle we’ve given the AEV treatment to, we wanted to do something special with the industry’s first use of hot-stamped Boron steel. We also expect that Colorado drivers will love the added ruggedness of our front and rear bumpers on ZR2 Bison,” said Dave Harriton, founder and president of AEV.

Buyers will be able to choose between the 3.6L V6 or 2.8L Duramax turbodiesel; extended and crew cab; and sort and long beds. 

The Bison will be arriving at dealers in January. Pricing will be announced close to the on sale date.

Source: Chevrolet


Chevrolet Unveils the Colorado ZR2 Bison

  • Factory steel bumpers, Boron-steel skid plates make Bison ready for off-the-grid adventures

DETROIT — The Colorado ZR2 Bison joins Chevrolet’s midsize truck lineup as an all-new performance variant. Bison is Chevy’s first collaboration with American Expedition Vehicles (AEV), a premium off-road aftermarket manufacturer.

Through constant innovation, Chevy has gained more than a quarter of all midsize truck sales in less than four years in the marketplace. In consecutive years, Colorado introduced the segment’s first diesel engine (excludes other GM vehicles), an all-new V-6 gas engine/eight-speed transmission combo, the ZR2 “segment of one” off-roader and now the Bison.

For maximum protection of key undercarriage elements while driving over rocky, jagged terrain, Bison features five skid plates covering the engine oil pan, fuel tank, transfer case and front and rear locking differentials. Designed by AEV, these skid plates are constructed of hard, durable hot-stamped Boron steel.

AEV-designed stamped steel front and rear bumpers further shield the truck from obstacles. The front bumper contains winch provisions and standard fog lights, with recovery points integrated into the rear bumper.

“More and more enthusiasts are discovering that Colorado is ideal for off-roading, especially overland travel,” said Sandor Piszar, director of Marketing, Chevrolet Truck.

“The Colorado Z71 offers a full suite of off-road equipment, the maneuverability of a midsize truck and the driving range of a class-exclusive diesel engine. The Colorado ZR2 offers even greater off-road capability with class-exclusive front and rear locking differentials and Multimatic DSSVTM dampers. And now, Bison offers customers an even more extreme turnkey off-road truck ready to tackle your next adventure.”

An exclusive, flow-through “CHEVROLET” lettered grille replaces the traditional bowtie on Bison’s front end. The 31-inch Goodyear Wrangler Duratrac off-road tires sit beneath larger fender flares and wrap all-new, ZR2 Bison-specific 17 x 8-inch aluminum wheels.

This new Colorado variant also features “Bison” decals on the bed sides, an “AEV Bison” logo on the tailgate and embroidered AEV logo floor liners and front head restraints.

“We’ve been following Colorado since its introduction, and the ZR2 really captured our attention,” said Dave Harriton, founder and president of AEV. “As this is the first Chevrolet vehicle we’ve given the AEV treatment to, we wanted to do something special with the industry’s first use of hot-stamped Boron steel. We also expect that Colorado drivers will love the added ruggedness of our front and rear bumpers on ZR2 Bison.”

The ZR2 Bison also duplicates the full equipment list of the Colorado ZR2, including, but not limited to:

  • Class-exclusive front and rear locking electronic differentials.
  • Revolutionary, segment-exclusive Multimatic DSSVTM dampers.
  • Off-road rocker protection.
  • Cast-iron control arms.
  • Autotrac transfer case.

Like ZR2, Bison also features a modified rear axle with a 3.42 ratio, front and rear tracks widened by 3.5 inches and a factory suspension lifted 2 inches over a Colorado Z71.

Available options on Bison include:

  • 2.8L Duramax Turbo-Diesel engine paired with a six-speed automatic transmission, capable of 186 horsepower and 369 lb-ft of torque.
  • Choice of crew- or extended cab configurations (including short and long beds, respectively).

Customers will also be able to purchase an available third-party accessory snorkel for ZR2 Bison from AEV, ideal for air filtration while driving on dusty trails. This feature is compatible with all Colorado pickup variants.

The 2019 Colorado ZR2 Bison goes on sale in January 2019, modified for extreme off-road use and backed by a full factory limited warranty.


View full article

  • Upvote 1

Share this post


Link to post
Share on other sites

SWEET :metal:

I will take one in Forest Green Metallic fully loaded with the Duramax please! 

Share this post


Link to post
Share on other sites

Two questions:

One: When will they build a Silverado and/or a Tahoe version of this truck?

Two: What is that gray pipe jutting out of the front passenger side quarter panel?

Share this post


Link to post
Share on other sites
20 minutes ago, riviera74 said:

Two: What is that gray pipe jutting out of the front passenger side quarter panel?

 

That would be the optional snorkel.

  • Haha 1

Share this post


Link to post
Share on other sites

Like dfelt said, give me one in dark green in an extended cab Duramax.

I find it funny they'd go to the trouble to point out the obvious... that it has a steel bumper (LIKE THE NEW FORD RANGER... WINK WINK).

No snorkel for me.  Too gay.

I like the grille and bumpers on this better than the ZR2 actually.  Honestly I think the ZR2 looks like someone who lost their lower jaw in a horrific accident.

This model would be the perfect springboard for GM to utilize their 2.7L turbo in the smaller truck, then let it trickle down to the more mainstream models.  Of course then they'd need to upgrade the 2.8L Duramax.

Edited by ocnblu

Share this post


Link to post
Share on other sites

At first look I think it looks gnarly and awesome but the more I look at it I don't like something about the front and I think it's the grille. I'm all for a black grille but something about it they made it look really crappy. It's still gnarly but not exactly how I would want it to look. 

Share this post


Link to post
Share on other sites

Cool..Chevy's answer to the Ranger Raptor, and it's going to beat the Ranger Raptor to market. 

  • Upvote 1

Share this post


Link to post
Share on other sites
2 hours ago, ccap41 said:

At first look I think it looks gnarly and awesome but the more I look at it I don't like something about the front and I think it's the grille. I'm all for a black grille but something about it they made it look really crappy. It's still gnarly but not exactly how I would want it to look. 

I agree that the truck is gnarly and I also do not like the all black plastic grill. That is the one Item I would go 3rd party on getting a replacement for. Would rather have a black chrome grill with a Black chevy logo than the plastic with Chevrolet name on it.

See the source image

Something like this is not bad, better than what GM did.

Share this post


Link to post
Share on other sites
20 hours ago, dfelt said:

I agree that the truck is gnarly and I also do not like the all black plastic grill. That is the one Item I would go 3rd party on getting a replacement for. Would rather have a black chrome grill with a Black chevy logo than the plastic with Chevrolet name on it.

See the source image

Something like this is not bad, better than what GM did.

I like that mesh grille, but it needs the bowtie, IMO.   Black w/ the blue insert maybe. 

Share this post


Link to post
Share on other sites
1 hour ago, Cubical-aka-Moltar said:

I like that mesh grille, but it needs the bowtie, IMO.   Black w/ the blue insert maybe. 

I agree, The web site says they have it for the Colorado, but no pictures. They do have a black bow-tie that is back-lit or any other unlit color.

See the source image

Share this post


Link to post
Share on other sites

OUCH, seems ZR2 trucks are blowing their airbags in mild off road use and clearly lots of fans are not happy as GM is blowing them off.

https://jalopnik.com/chevrolet-colorado-side-curtain-airbags-keep-deploying-1828951213 

Crazy to watch the videos and see very mild off road stuff being done and BOOM the side head airbags are deployed. A bit too sensitive I think for what this truck is supposed to be capable of.

Share this post


Link to post
Share on other sites

Yeah I've watched a few of those as well and the stuff they're going over is less severe than hitting a pothole on the interstate. 

I'm pretty sure my dad's Taco has a switch or button to turn off air bags for off-roading to prevent this.

Share this post


Link to post
Share on other sites
7 minutes ago, ccap41 said:

Yeah I've watched a few of those as well and the stuff they're going over is less severe than hitting a pothole on the interstate. 

I'm pretty sure my dad's Taco has a switch or button to turn off air bags for off-roading to prevent this.

I agree, I am surprised that Chevrolet did not install a manual deactivate switch for airbags when offroading. Seems like a common sense rather than have such a sensitive your rolling over sensor when they are not. :duh:

Share this post


Link to post
Share on other sites

Hmmm....a switch to turn off airbags seems like a lawsuit waiting to happen...unless it can only be activated when in 4 wheel low and for low speeds...

  • Upvote 1

Share this post


Link to post
Share on other sites
8 minutes ago, Cubical-aka-Moltar said:

Hmmm....a switch to turn off airbags seems like a lawsuit waiting to happen...unless it can only be activated when in 4 wheel low and for low speeds...

I looked it up and it's just the passenger side airbag that can be turned off. 

Airbag.jpg

Share this post


Link to post
Share on other sites
1 minute ago, ccap41 said:

I looked it up and it's just the passenger side airbag that can be turned off. 

Airbag.jpg

The durangos and dakota pickups had this also. My daughters 1999 Durango and sons 1998 Dakota both have this option.

Share this post


Link to post
Share on other sites

I think it was something offered in regular cab trucks, because you need to be able to turn off the passenger airbag if using a child safety seat.  I recall reading something about that long ago.

Edited by Cubical-aka-Moltar
  • Upvote 1

Share this post


Link to post
Share on other sites
On 9/17/2018 at 8:36 AM, dfelt said:

OUCH, seems ZR2 trucks are blowing their airbags in mild off road use and clearly lots of fans are not happy as GM is blowing them off.

https://jalopnik.com/chevrolet-colorado-side-curtain-airbags-keep-deploying-1828951213 

Crazy to watch the videos and see very mild off road stuff being done and BOOM the side head airbags are deployed. A bit too sensitive I think for what this truck is supposed to be capable of.

That needs to be addressed before someone gets seriously hurt or worse. It's very common for people to have their head out the window for better tire placement spotting. And apparently it's not just the trucks. Then there is sticking owners with a very expensive tab for a problem that shouldn't exist. 

  • Upvote 1

Share this post


Link to post
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Social Stream

  • Similar Content

    • By Drew Dowdell
      Mercedes unveiled the Mercedes-Benz GLB at an event in Salt Lake City yesterday.   The GLB joins the GLA in the small crossover space, however it can be configured with seating for up to seven passengers.   Built on the compact, front wheel drive, transverse engine platform that is shared with the GLA, the boxy shape makes the most of its 111.4 inch wheelbase (5.1 inches longer than the GLA). The GLB can be purchased as a 5-seater or 7-seater with a second row that can slide fore and aft up to 6 inches. 
      Mercedes says the boxy shape gives the GLB powerful off-road proportions, and short front and rear overhangs help with approach and departure angles. Front-wheel drive is the default, and Mercedes 4Matic all-wheel drive is optional and comes with various modes for comfort, sport, and off-road. Hill-Start assist and downhill speed regulation contribute to the GLB's off-road chops.
      Powering the GLB is a 2.0 liter transverse 4-cylinder with an 8-speed automatic transmission. The engine produces 221 horsepower and 258 lb-ft of torque from 1800 rpm - 4,000 rpm. It is likely that we will later see AMG engine variants join the lineup like the 416 hp 4-cylinder that AMG just debuted. 
      The 2020 Mercedes-Benz GLB will be in dealerships by the end of 2019. 
      At a glance:
       
      GLB 250
      4MATIC
      Transmission
      8G-DCT
      (automatic)
      Displacement (cc)
      1991
      Output (hp)
      221
      at rpm
      5,500
      Max. torque (lb-ft)
      258
      at rpm
      1800 - 4000
      Acceleration 0-60 mph (s)
      6.9
      Top speed (mph)
      130
      *Spec for load compartment capacity calculated according to VDA standards.
       
       

      View full article
    • By Drew Dowdell
      Mercedes unveiled the Mercedes-Benz GLB at an event in Salt Lake City yesterday.   The GLB joins the GLA in the small crossover space, however it can be configured with seating for up to seven passengers.   Built on the compact, front wheel drive, transverse engine platform that is shared with the GLA, the boxy shape makes the most of its 111.4 inch wheelbase (5.1 inches longer than the GLA). The GLB can be purchased as a 5-seater or 7-seater with a second row that can slide fore and aft up to 6 inches. 
      Mercedes says the boxy shape gives the GLB powerful off-road proportions, and short front and rear overhangs help with approach and departure angles. Front-wheel drive is the default, and Mercedes 4Matic all-wheel drive is optional and comes with various modes for comfort, sport, and off-road. Hill-Start assist and downhill speed regulation contribute to the GLB's off-road chops.
      Powering the GLB is a 2.0 liter transverse 4-cylinder with an 8-speed automatic transmission. The engine produces 221 horsepower and 258 lb-ft of torque from 1800 rpm - 4,000 rpm. It is likely that we will later see AMG engine variants join the lineup like the 416 hp 4-cylinder that AMG just debuted. 
      The 2020 Mercedes-Benz GLB will be in dealerships by the end of 2019. 
      At a glance:
       
      GLB 250
      4MATIC
      Transmission
      8G-DCT
      (automatic)
      Displacement (cc)
      1991
      Output (hp)
      221
      at rpm
      5,500
      Max. torque (lb-ft)
      258
      at rpm
      1800 - 4000
      Acceleration 0-60 mph (s)
      6.9
      Top speed (mph)
      130
      *Spec for load compartment capacity calculated according to VDA standards.
       
       
    • By Drew Dowdell
      GM released power figures today for the new inline 6-cylinder diesel engine that will be available in the Chevrolet Silverado and GMC Sierra.  Available at the same price as the 6.2 liter model, GM promises the new engine will change perceptions about diesel performance and refinement.  GM recently announced the delay of the 3.0-liter diesel until the 2020 model year due to emissions certification delays. 
      Paired with a 10-speed automatic transmission, the diesel produces an SAE-certified 277 horsepower and 460 lb-ft of torque with 95 percent of that torque being available at just 1,250 RPM.  Torque peak comes at 1500 rpm and peak horsepower at 3750 rpm.
      The powertrain is setup to offer diesel exhaust braking to help slow the vehicle when the truck is in tow-haul mode, limiting the number of applications of the brakes to save on brake wear. The engine also has a user selective start-stop function to save additional fuel in city driving. 
      2019 CHEVROLET SILVERADO 3.0L DURAMAX TURBO-DIESEL SPECIFICATIONS
      Type:
      Duramax 3.0L DOHC Turbo Diesel I6 
      Bore & Stroke (in. / mm):
      3.30 x 3.54 inches (84mm x 90mm)
      Block Material:
      Aluminum
      Cylinder Head Material:
      Aluminum
      Compression Ratio:
      15.0: 1
      Firing Order:
      1-5-3-6-2-4
      Valvetrain:
      Dual-overhead camshafts, four-valves per cylinder
      Air Delivery:
      Single variable-geometry turbocharger; intercooling system. 42.8-psi / 2.95 bar max boost
      Fuel Delivery:
      High-pressure, common-rail direct injection (36,250 psi / 2500 bar); electronic throttle valve
      Ignition System:
      Compression
      Max Engine Speed:
      5100 rpm
      Additional Features:
      Continuously variable oil pump; engine oil cooler, automatic stop/start, Active Thermal Management,
      Emissions Control:
      Low-pressure Exhaust Gas Recirculation (EGR); Selective Catalyst Reduction on Filter (SCRF)
      Horsepower
      (hp / kW @ rpm):
      277 / 204 @ 3750 (SAE certified)
      Torque
      (lb.-ft. / Nm @ rpm):
      460 / 624 @ 1500 (SAE certified)
      Manufacturing Location (of globally sourced parts)
      Flint, Mich.  
       
       
      Chevy Press release on page 2


      2020 CHEVROLET SILVERADO’S NEW, ADVANCED 3.0L DURAMAX TURBO-DIESEL REDEFINES EXPECTATIONS
      No-compromise engine delivers refinement, performance and efficiency
      2019-06-03
      DETROIT — The all-new 2020 Chevrolet Silverado’s available 3.0L Duramax inline-six turbo-diesel engine adds choice and versatility for full-size truck customers, offering class-leading torque and horsepower in addition to focusing on fuel economy and capability. It is the first-ever inline-six turbo-diesel offered in Chevrolet’s full-size light-duty trucks.
      Chevrolet engineers started with a clean-sheet design and developed an all-new engine that leverages the efficiency and refinement advantages of the inline six-cylinder architecture and incorporates advanced combustion and emissions technologies to optimize performance and efficiency. It is priced identically to the 6.2L V-8 as a $2,495 premium over a 5.3L V-8 model or $3,890 over a 2.7L Turbo model.
      “From the moment the engine is started, to its idle, acceleration and highway cruising, the 3.0L Duramax performance will change perceptions of what a diesel engine can offer in refinement,” said Nicola Menarini, director for Diesel Truck Engine Program Execution. “With advanced technologies that draw on global diesel expertise, it’s a no-compromise choice for those who want the capability and driving range of a diesel in a light-duty truck.”
      Available on LT, RST, LTZ and High Country models, the 3.0L Duramax diesel rounds out the new Silverado’s range of six propulsion choices, each tailored to suit customers’ needs for performance, efficiency, technology and value. It is rated at an SAE-certified 277 horsepower and 460 lb-ft of torque delivering 95 percent of peak torque at just 1,250 rpm. Peak torque is sustained from 1,500 rpm through 3,000 rpm, providing a powerfully smooth and satisfying driving experience.
      The 3.0L Duramax is paired with GM’s 10L80 10-speed automatic transmission, featuring a centrifugal pendulum absorber torque converter that reduces vibrations to improve smoothness, reinforcing its performance, efficiency and refinement. This combination also offers exhaust braking, which uses the diesel engine’s compression to help slow the vehicle, requiring fewer brake applications by the driver when in Tow Haul mode.
      Innovative Engine Technologies
      The inline six-cylinder architecture offers inherent efficiency and refinement, but the team expanded with smart technology choices to help improve efficiency and weight while optimizing the truck experience. A lightweight aluminum block and cylinder head reduce overall mass, and Active Thermal Management enhances efficiency and cold-weather warm-up. Ceramic glow plugs also help with shorter heat-up times and a quicker cold start, meaning the engine block heater is not needed until -22 degrees F.
      Towing is an important part of owning a truck, and customers can gain additional confidence thanks to the exhaust brake available in tow-haul mode. The water charge air cooler, coupled with low pressure EGR, reduces time to torque. The variable geometry turbocharger helps provide a greater balance of performance and efficiency, and an electronically variable intake manifold helps optimize performance across the rpm band.
      Inherently efficient and balanced
      Compared to a DOHC V-6, the inline-six architecture offers greater efficiency from the reduced friction of operating only two camshafts and their associated valvetrain components. The I6 configuration offers the perfect balance of primary and secondary forces, without the need for balancing shafts.
      “In addition to reduced friction, the architecture enables smooth operation,” Menarini said. “The new Duramax 3.0L elevates the 2019 Silverado with one of the most refined and efficient diesel engines in the segment.”
      Along with supporting elements such as a tuned air induction system and other noise-attenuating elements, the 3.0L Duramax delivers exceptional quietness and smoothness at all engine speeds.
      All-aluminum construction and tough rotating assembly
      The 3.0L Duramax cylinder block is made of a cast aluminum alloy that provides the strength required to support the high combustion pressures that occur within a diesel engine, while also offering an approximately 25 percent mass savings over a comparable cast iron engine block. Iron cylinder liners are used within the aluminum block to insure truck durability.
      There are seven nodular iron main bearing caps that help ensure the block’s strength under those high combustion pressures, while also enabling accurate location of the rotating assembly. A deep-skirt block design, where the block casting extends below the crankshaft centerline, also contributes to the engine’s stiffness and refinement. It’s complemented by a stiffness-enhancing aluminum lower crankcase extension attached to the main bearing caps.
      The rotating assembly consists of a forged steel crankshaft, forged steel connecting rods and hypereutectic aluminum pistons. The alloys in the respective castings for the rods and pistons make them lightweight and durable. Silicon is blended with the aluminum for heat resistance and tolerance within the piston cylinders, which enhances performance and makes the engine quiet.
      A thick piston crown — the top of the piston — and reinforced top ring add strength to support the tremendous cylinder pressures enabled by turbocharging and the engine’s high 15.0:1 compression ratio.
      DOHC Cylinder Head and Rear Cam Drive
      Overhead camshafts offer a direct, efficient means of operating the valves, while four valves per cylinder activated by maintenance-free finger followers with hydraulic lash adjusters increase airflow in and out of the engine. This arrangement is integrated on the Duramax 3.0L’s lightweight aluminum cylinder head, which is topped with a lightweight composite cam cover that incorporates the crankcase ventilation and oil separation systems.
      A pair of lightweight, assembled camshafts actuates 28.35 mm diameter (1.12-inch) intake and 24.55 mm diameter (0.97-inch) exhaust valves. The camshaft drivetrain is uniquely located at the rear (flywheel side) of the engine, for greater refinement and packaging considerations for the comparatively long inline-six. A crankshaft-driven chain drives the high-pressure direct-injection fuel pump, while a chain driven by the fuel pump drives both intake and exhaust camshafts. A smaller belt drives the variable flow oil pump from the crankshaft.
      Additional Technology Highlights
      Variable geometry turbocharging enables the Duramax 3.0L engine to deliver class-leading horsepower with minimal effect on overall efficiency. The system uses closed loop controlled vanes position and sophisticated electronic controls to automatically adjust boost pressure to the desired value based on engine running conditions and instantaneous power demand. The liquid-cooled turbocharger features a low-friction ball-bearing shaft and is mounted close to the exhaust outlet of the engine for quicker spool-up of the turbine and quicker light-off of the exhaust catalyst. A water-to-air intercooling system produces a cooler higher density air charge for greater power. Maximum boost pressure is 43,5 psi (300 Kpa) absolute.
      Low-pressure EGR: The Duramax 3.0L utilizes new low-pressure Exhaust Gas Recirculation to optimize performance and efficiency. The EGR system diverts some of the engine-out exhaust gas and mixes it back into the fresh intake air stream, which is drawn into the cylinder head for combustion. That lowers combustion temperatures and rates.
      Traditionally, EGR systems in diesel applications recirculate exhaust gases between the two high-pressure points, the exhaust manifold(s) and intake manifold. However, it generally requires efficiency-robbing assistance from the turbocharger or other supporting elements to achieve the pressure differential required for sufficient EGR flow rates.
      The new low-pressure system adds to the high-pressure system, supporting continual adjustment of exhaust backpressure for more efficient operation. It recirculates gases between the low-pressure points in the exhaust system (downstream of the particulate filter) and after the compressor inlet.
      When the low-pressure EGR is activated by an electronically controlled valve, the engine burns exhaust gas that has already passed through the particulate filter. That increases the turbocharger’s efficiency, which helps overall vehicle efficiency without deteriorating the rate of particulate matter emitted by the engine.
      A variable intake manifold offers dual air intake pathways for each cylinder. Electronically controlled flaps — one for each cylinder — shorten or lengthen the airflow to each cylinder. This optimizes the airflow into the engine and improves performance and responsiveness across the rpm band, particularly at lower engine speeds.
      A variable-pressure oiling system with a continuously variable-displacement vane oil pump enhances efficiency by optimizing oil pressure as a function of engine speed and load. With it, the oil supply is matched to the engine requirements rather than the excessive supply of a conventional, fixed-displacement oil pump. The engine uses low-friction Diesel Dexos 0W20 oil.
      Oil jets located in the block are employed for performance and temperature control. They target the inner core of the piston with an extra layer of cooling, friction-reducing oil. The jets reduce piston temperature, allowing the engine to produce more power and enhance long-term durability than engines without the technology.
      Active Thermal Management helps the engine warm up quickly to achieve and maintain its optimal engine temperature for performance and efficiency over the entire engine operating range. The system uses a three-actuator rotary valve system to distribute coolant through the engine in a targeted manner. It sends heat where it’s needed to warm up the engine to reduce friction and heat the passenger cabin or cools when needed for high-power operation. The Duramax 3.0L also features split cooling between the block and head.
      Common rail direct fuel injection of 2,500 bar (36,250 psi) helps generates class-leading horsepower and torque. The system’s pressure is generated by an engine-driven twin-piston pump sending fuel to solenoid-activated injectors with nine-hole nozzles that support precise metering of the fuel for a smooth idle and lower combustion noise. The fuel system is capable of multiple injections per combustion cycle — up to 10 times per injector — for more consistent and stable combustion performance that translates into smoothness and refinement, particularly at idle.   
      Electronic throttle valve: The Duramax 3.0L features an electronic throttle valve to regulate intake manifold pressure in order to optimize exhaust gas recirculation rates. It also contributes to a smooth engine shutdown via a more controlled method of airflow reduction.
      Ceramic glow plugs used in the Duramax 3.0L heat up more quickly and hotter than conventional metal-based glow plugs, helping the engine start and heat up more quickly in cold weather. The Duramax 3.0L achieves unassisted and assisted starting temperatures of -22 F (-30 C) and -40 F (-40 C) respectively.
      Stop/start technology helps optimize efficiency in city driving. The driver-selectable system shuts off the engine at stoplights and other stop-and-go situations. The engine automatically restarts when the driver takes their foot off the brake.
      ABOUT CHEVROLET
      Founded in 1911 in Detroit, Chevrolet is one of the world's largest car brands, doing business in more than 100 countries and selling more than 4.0 million cars and trucks a year. Chevrolet provides customers with fuel-efficient vehicles that feature engaging performance, design that makes the heart beat, passive and active safety features and easy-to-use technology, all at a value. More information on Chevrolet models can be found at www.chevrolet.com.
      # # #
      2019 CHEVROLET SILVERADO 3.0L DURAMAX TURBO-DIESEL SPECIFICATIONS
      Type:
      Duramax 3.0L DOHC Turbo Diesel I6 
      Bore & Stroke (in. / mm):
      3.30 x 3.54 inches (84mm x 90mm)
      Block Material:
      Aluminum
      Cylinder Head Material:
      Aluminum
      Compression Ratio:
      15.0: 1
      Firing Order:
      1-5-3-6-2-4
      Valvetrain:
      Dual-overhead camshafts, four-valves per cylinder
      Air Delivery:
      Single variable-geometry turbocharger; intercooling system. 42.8-psi / 2.95 bar max boost
      Fuel Delivery:
      High-pressure, common-rail direct injection (36,250 psi / 2500 bar); electronic throttle valve
      Ignition System:
      Compression
      Max Engine Speed:
      5100 rpm
      Additional Features:
      Continuously variable oil pump; engine oil cooler, automatic stop/start, Active Thermal Management,
      Emissions Control:
      Low-pressure Exhaust Gas Recirculation (EGR); Selective Catalyst Reduction on Filter (SCRF)
      Horsepower
      (hp / kW @ rpm):
      277 / 204 @ 3750 (SAE certified)
      Torque
      (lb.-ft. / Nm @ rpm):
      460 / 624 @ 1500 (SAE certified)
       

      View full article
    • By Drew Dowdell
      GM released power figures today for the new inline 6-cylinder diesel engine that will be available in the Chevrolet Silverado and GMC Sierra.  Available at the same price as the 6.2 liter model, GM promises the new engine will change perceptions about diesel performance and refinement.  GM recently announced the delay of the 3.0-liter diesel until the 2020 model year due to emissions certification delays. 
      Paired with a 10-speed automatic transmission, the diesel produces an SAE-certified 277 horsepower and 460 lb-ft of torque with 95 percent of that torque being available at just 1,250 RPM.  Torque peak comes at 1500 rpm and peak horsepower at 3750 rpm.
      The powertrain is setup to offer diesel exhaust braking to help slow the vehicle when the truck is in tow-haul mode, limiting the number of applications of the brakes to save on brake wear. The engine also has a user selective start-stop function to save additional fuel in city driving. 
      2019 CHEVROLET SILVERADO 3.0L DURAMAX TURBO-DIESEL SPECIFICATIONS
      Type:
      Duramax 3.0L DOHC Turbo Diesel I6 
      Bore & Stroke (in. / mm):
      3.30 x 3.54 inches (84mm x 90mm)
      Block Material:
      Aluminum
      Cylinder Head Material:
      Aluminum
      Compression Ratio:
      15.0: 1
      Firing Order:
      1-5-3-6-2-4
      Valvetrain:
      Dual-overhead camshafts, four-valves per cylinder
      Air Delivery:
      Single variable-geometry turbocharger; intercooling system. 42.8-psi / 2.95 bar max boost
      Fuel Delivery:
      High-pressure, common-rail direct injection (36,250 psi / 2500 bar); electronic throttle valve
      Ignition System:
      Compression
      Max Engine Speed:
      5100 rpm
      Additional Features:
      Continuously variable oil pump; engine oil cooler, automatic stop/start, Active Thermal Management,
      Emissions Control:
      Low-pressure Exhaust Gas Recirculation (EGR); Selective Catalyst Reduction on Filter (SCRF)
      Horsepower
      (hp / kW @ rpm):
      277 / 204 @ 3750 (SAE certified)
      Torque
      (lb.-ft. / Nm @ rpm):
      460 / 624 @ 1500 (SAE certified)
      Manufacturing Location (of globally sourced parts)
      Flint, Mich.  
       
       
      Chevy Press release on page 2


      2020 CHEVROLET SILVERADO’S NEW, ADVANCED 3.0L DURAMAX TURBO-DIESEL REDEFINES EXPECTATIONS
      No-compromise engine delivers refinement, performance and efficiency
      2019-06-03
      DETROIT — The all-new 2020 Chevrolet Silverado’s available 3.0L Duramax inline-six turbo-diesel engine adds choice and versatility for full-size truck customers, offering class-leading torque and horsepower in addition to focusing on fuel economy and capability. It is the first-ever inline-six turbo-diesel offered in Chevrolet’s full-size light-duty trucks.
      Chevrolet engineers started with a clean-sheet design and developed an all-new engine that leverages the efficiency and refinement advantages of the inline six-cylinder architecture and incorporates advanced combustion and emissions technologies to optimize performance and efficiency. It is priced identically to the 6.2L V-8 as a $2,495 premium over a 5.3L V-8 model or $3,890 over a 2.7L Turbo model.
      “From the moment the engine is started, to its idle, acceleration and highway cruising, the 3.0L Duramax performance will change perceptions of what a diesel engine can offer in refinement,” said Nicola Menarini, director for Diesel Truck Engine Program Execution. “With advanced technologies that draw on global diesel expertise, it’s a no-compromise choice for those who want the capability and driving range of a diesel in a light-duty truck.”
      Available on LT, RST, LTZ and High Country models, the 3.0L Duramax diesel rounds out the new Silverado’s range of six propulsion choices, each tailored to suit customers’ needs for performance, efficiency, technology and value. It is rated at an SAE-certified 277 horsepower and 460 lb-ft of torque delivering 95 percent of peak torque at just 1,250 rpm. Peak torque is sustained from 1,500 rpm through 3,000 rpm, providing a powerfully smooth and satisfying driving experience.
      The 3.0L Duramax is paired with GM’s 10L80 10-speed automatic transmission, featuring a centrifugal pendulum absorber torque converter that reduces vibrations to improve smoothness, reinforcing its performance, efficiency and refinement. This combination also offers exhaust braking, which uses the diesel engine’s compression to help slow the vehicle, requiring fewer brake applications by the driver when in Tow Haul mode.
      Innovative Engine Technologies
      The inline six-cylinder architecture offers inherent efficiency and refinement, but the team expanded with smart technology choices to help improve efficiency and weight while optimizing the truck experience. A lightweight aluminum block and cylinder head reduce overall mass, and Active Thermal Management enhances efficiency and cold-weather warm-up. Ceramic glow plugs also help with shorter heat-up times and a quicker cold start, meaning the engine block heater is not needed until -22 degrees F.
      Towing is an important part of owning a truck, and customers can gain additional confidence thanks to the exhaust brake available in tow-haul mode. The water charge air cooler, coupled with low pressure EGR, reduces time to torque. The variable geometry turbocharger helps provide a greater balance of performance and efficiency, and an electronically variable intake manifold helps optimize performance across the rpm band.
      Inherently efficient and balanced
      Compared to a DOHC V-6, the inline-six architecture offers greater efficiency from the reduced friction of operating only two camshafts and their associated valvetrain components. The I6 configuration offers the perfect balance of primary and secondary forces, without the need for balancing shafts.
      “In addition to reduced friction, the architecture enables smooth operation,” Menarini said. “The new Duramax 3.0L elevates the 2019 Silverado with one of the most refined and efficient diesel engines in the segment.”
      Along with supporting elements such as a tuned air induction system and other noise-attenuating elements, the 3.0L Duramax delivers exceptional quietness and smoothness at all engine speeds.
      All-aluminum construction and tough rotating assembly
      The 3.0L Duramax cylinder block is made of a cast aluminum alloy that provides the strength required to support the high combustion pressures that occur within a diesel engine, while also offering an approximately 25 percent mass savings over a comparable cast iron engine block. Iron cylinder liners are used within the aluminum block to insure truck durability.
      There are seven nodular iron main bearing caps that help ensure the block’s strength under those high combustion pressures, while also enabling accurate location of the rotating assembly. A deep-skirt block design, where the block casting extends below the crankshaft centerline, also contributes to the engine’s stiffness and refinement. It’s complemented by a stiffness-enhancing aluminum lower crankcase extension attached to the main bearing caps.
      The rotating assembly consists of a forged steel crankshaft, forged steel connecting rods and hypereutectic aluminum pistons. The alloys in the respective castings for the rods and pistons make them lightweight and durable. Silicon is blended with the aluminum for heat resistance and tolerance within the piston cylinders, which enhances performance and makes the engine quiet.
      A thick piston crown — the top of the piston — and reinforced top ring add strength to support the tremendous cylinder pressures enabled by turbocharging and the engine’s high 15.0:1 compression ratio.
      DOHC Cylinder Head and Rear Cam Drive
      Overhead camshafts offer a direct, efficient means of operating the valves, while four valves per cylinder activated by maintenance-free finger followers with hydraulic lash adjusters increase airflow in and out of the engine. This arrangement is integrated on the Duramax 3.0L’s lightweight aluminum cylinder head, which is topped with a lightweight composite cam cover that incorporates the crankcase ventilation and oil separation systems.
      A pair of lightweight, assembled camshafts actuates 28.35 mm diameter (1.12-inch) intake and 24.55 mm diameter (0.97-inch) exhaust valves. The camshaft drivetrain is uniquely located at the rear (flywheel side) of the engine, for greater refinement and packaging considerations for the comparatively long inline-six. A crankshaft-driven chain drives the high-pressure direct-injection fuel pump, while a chain driven by the fuel pump drives both intake and exhaust camshafts. A smaller belt drives the variable flow oil pump from the crankshaft.
      Additional Technology Highlights
      Variable geometry turbocharging enables the Duramax 3.0L engine to deliver class-leading horsepower with minimal effect on overall efficiency. The system uses closed loop controlled vanes position and sophisticated electronic controls to automatically adjust boost pressure to the desired value based on engine running conditions and instantaneous power demand. The liquid-cooled turbocharger features a low-friction ball-bearing shaft and is mounted close to the exhaust outlet of the engine for quicker spool-up of the turbine and quicker light-off of the exhaust catalyst. A water-to-air intercooling system produces a cooler higher density air charge for greater power. Maximum boost pressure is 43,5 psi (300 Kpa) absolute.
      Low-pressure EGR: The Duramax 3.0L utilizes new low-pressure Exhaust Gas Recirculation to optimize performance and efficiency. The EGR system diverts some of the engine-out exhaust gas and mixes it back into the fresh intake air stream, which is drawn into the cylinder head for combustion. That lowers combustion temperatures and rates.
      Traditionally, EGR systems in diesel applications recirculate exhaust gases between the two high-pressure points, the exhaust manifold(s) and intake manifold. However, it generally requires efficiency-robbing assistance from the turbocharger or other supporting elements to achieve the pressure differential required for sufficient EGR flow rates.
      The new low-pressure system adds to the high-pressure system, supporting continual adjustment of exhaust backpressure for more efficient operation. It recirculates gases between the low-pressure points in the exhaust system (downstream of the particulate filter) and after the compressor inlet.
      When the low-pressure EGR is activated by an electronically controlled valve, the engine burns exhaust gas that has already passed through the particulate filter. That increases the turbocharger’s efficiency, which helps overall vehicle efficiency without deteriorating the rate of particulate matter emitted by the engine.
      A variable intake manifold offers dual air intake pathways for each cylinder. Electronically controlled flaps — one for each cylinder — shorten or lengthen the airflow to each cylinder. This optimizes the airflow into the engine and improves performance and responsiveness across the rpm band, particularly at lower engine speeds.
      A variable-pressure oiling system with a continuously variable-displacement vane oil pump enhances efficiency by optimizing oil pressure as a function of engine speed and load. With it, the oil supply is matched to the engine requirements rather than the excessive supply of a conventional, fixed-displacement oil pump. The engine uses low-friction Diesel Dexos 0W20 oil.
      Oil jets located in the block are employed for performance and temperature control. They target the inner core of the piston with an extra layer of cooling, friction-reducing oil. The jets reduce piston temperature, allowing the engine to produce more power and enhance long-term durability than engines without the technology.
      Active Thermal Management helps the engine warm up quickly to achieve and maintain its optimal engine temperature for performance and efficiency over the entire engine operating range. The system uses a three-actuator rotary valve system to distribute coolant through the engine in a targeted manner. It sends heat where it’s needed to warm up the engine to reduce friction and heat the passenger cabin or cools when needed for high-power operation. The Duramax 3.0L also features split cooling between the block and head.
      Common rail direct fuel injection of 2,500 bar (36,250 psi) helps generates class-leading horsepower and torque. The system’s pressure is generated by an engine-driven twin-piston pump sending fuel to solenoid-activated injectors with nine-hole nozzles that support precise metering of the fuel for a smooth idle and lower combustion noise. The fuel system is capable of multiple injections per combustion cycle — up to 10 times per injector — for more consistent and stable combustion performance that translates into smoothness and refinement, particularly at idle.   
      Electronic throttle valve: The Duramax 3.0L features an electronic throttle valve to regulate intake manifold pressure in order to optimize exhaust gas recirculation rates. It also contributes to a smooth engine shutdown via a more controlled method of airflow reduction.
      Ceramic glow plugs used in the Duramax 3.0L heat up more quickly and hotter than conventional metal-based glow plugs, helping the engine start and heat up more quickly in cold weather. The Duramax 3.0L achieves unassisted and assisted starting temperatures of -22 F (-30 C) and -40 F (-40 C) respectively.
      Stop/start technology helps optimize efficiency in city driving. The driver-selectable system shuts off the engine at stoplights and other stop-and-go situations. The engine automatically restarts when the driver takes their foot off the brake.
      ABOUT CHEVROLET
      Founded in 1911 in Detroit, Chevrolet is one of the world's largest car brands, doing business in more than 100 countries and selling more than 4.0 million cars and trucks a year. Chevrolet provides customers with fuel-efficient vehicles that feature engaging performance, design that makes the heart beat, passive and active safety features and easy-to-use technology, all at a value. More information on Chevrolet models can be found at www.chevrolet.com.
      # # #
      2019 CHEVROLET SILVERADO 3.0L DURAMAX TURBO-DIESEL SPECIFICATIONS
      Type:
      Duramax 3.0L DOHC Turbo Diesel I6 
      Bore & Stroke (in. / mm):
      3.30 x 3.54 inches (84mm x 90mm)
      Block Material:
      Aluminum
      Cylinder Head Material:
      Aluminum
      Compression Ratio:
      15.0: 1
      Firing Order:
      1-5-3-6-2-4
      Valvetrain:
      Dual-overhead camshafts, four-valves per cylinder
      Air Delivery:
      Single variable-geometry turbocharger; intercooling system. 42.8-psi / 2.95 bar max boost
      Fuel Delivery:
      High-pressure, common-rail direct injection (36,250 psi / 2500 bar); electronic throttle valve
      Ignition System:
      Compression
      Max Engine Speed:
      5100 rpm
      Additional Features:
      Continuously variable oil pump; engine oil cooler, automatic stop/start, Active Thermal Management,
      Emissions Control:
      Low-pressure Exhaust Gas Recirculation (EGR); Selective Catalyst Reduction on Filter (SCRF)
      Horsepower
      (hp / kW @ rpm):
      277 / 204 @ 3750 (SAE certified)
      Torque
      (lb.-ft. / Nm @ rpm):
      460 / 624 @ 1500 (SAE certified)
       
    • By William Maley
      At an event tonight in Detroit, Cadillac delivered a one-two punch for those craving for a bit of performance with the introduction of the 2020 CT4-V and CT5-V. On paper, the two models aren't what we were expecting. Instead of the firebreathing monsters that were the ATS-V and CTS-V, the CT4 and CT5-V are more in line with middle children of German automakers - Audi S4, BMW M340i, and Mercedes-AMG C43 and E43.
      CT4-V
      To say we're a bit surprised that Cadillac is showing off the performance variant of their upcoming entry-level sedan would be an understatement - the reveal of the standard CT4 is expected to happen in a few weeks. Aimed at the likes of the Audi S3 and Mercedes-AMG A45, the CT4-V uses a 2.7L turbo-four from the Chevrolet Silverado and GMC Sierra. It makes 320 horsepower and 369 pound-feet of torque. Power flows through a 10-speed automatic to either rear or all four wheels. No manual is available. Other mechanical bits to be aware of are four-piston brake calipers at all corners, and Magnetic Ride Control being standard on RWD models - AWD sticks with conventional shocks.
      Design-wise, the CT4-V looks like it could be mid-cycle facelift for the ATS with a similar profile. The front end mimics the larger CT5 with a wide grille and unique headlight shape. Around back, there is a boat tail effect for the trunk lid with a small lip spoiler and quad tailpipes.
      CT5-V
      Cadillac appears to be playing it quiet with the CT5-V's design. The only bits that set it apart from the standard model are the dark trim, quad-tailpipes, rear diffuser, and new wheels. Under the hood is a twin-turbo 3.0L V6 making 355 horsepower and 400 pound-feet of torque. For those keeping score, that's 20 more horsepower than the CT5 with this same engine, while torque is unchanged. Like the CT4-V, the CT5 routes power through a 10-speed automatic and either rear- or all-wheel drive. An electronically controlled limited-slip differential, Magnetic Ride Control, Performance Traction Management system, and four-piston brakes finish off the changes.
      The CT4-V and CT5-V are expected to go on sale early next year.
      Our Big Concern
      We find ourselves wondering what is Cadillac thinking? On paper, these models make more sense as V-Sport models considering what's being presented. Badging them as V dilutes hardcore image that the past few models have brought forth. Why is Cadillac doing this? Autoblog may have an answer. According to a Cadillac representative, the brand is wanting to bring in a broader set of buyers to showrooms, hence they are making them less hardcore. This will allow them to bring V versions of other models like their crossovers. But there are hardcore versions coming in the pipeline according to the rep.
      Still, we can't help but wonder if GM has done their classic move of shooting themselves in the foot.
      Source: Cadillac


      Cadillac Reveals First-Ever CT4-V and CT5-V
      Expanded lineup adds more choices for spirited performance. Highlights include available Super Cruise, AWD, Magnetic Ride Control 4.0, eLSD and new V-Mode Driven by Cadillac’s latest turbocharging technology and building on more than 15 years of performance credentials, the first-ever 2020 CT4-V and CT5-V were unveiled today, expanding choices for the brand’s V-Series performance sub-brand.
      Following the 2019 CT6-V, they grow the V-Series family with even more levels of performance, while preserving the lineage established by the original V-Series lineup introduced in 2004.   
      “The new V-Series sedan lineup defines modern sophistication by combining luxury appointments with thoughtful technology and athletic refinement for the discerning enthusiast,” said Brandon Vivian, Cadillac executive chief engineer. “We are inviting even more customers into the V-Series family by adding a new level of elevated performance between our Sport models and the ultimate, high-performance track capability that the V-Series has grown to represent.”
      The first-ever CT4 and recently introduced CT5 represent Cadillac’s realigned sedan portfolio, characterized by new proportions, innovative technologies and more appearance and performance choices. Each is built on Cadillac’s award-winning rear-wheel-drive Alpha architecture, with the V-Series models developed to deliver the ultimate blend of performance, presence and road-going refinement.
      Both share the latest standard V-Series performance technologies, including Magnetic Ride Control 4.0, which is tuned specifically for V models to enhance comfort without sacrificing performance-oriented responsiveness, and drive modes that include new V-Mode personalization. Each model is available in RWD or AWD and features a 10-speed automatic transmission, Brembo front brakes with eBoost electronic assist and a limited-slip rear differential on CT4-V and electronic limited-slip differential on CT5-V.
      Cadillac’s exclusive Super Cruise1, the first true hands-free driver assistance feature for the freeway, is available on more than 130,000 miles of limited-access freeways in the U.S. and Canada. It will be available on both new V-Series models.  
      “The new lineup expands the V-Series ethos, drawing more customers into the Cadillac Performance family, and the newest Vs are focused on elevated athleticism and luxurious refinement for customers wanting a dynamic daily drive,” said Mark Reuss, GM president. “And this is only the beginning of the V family. Cadillac’s passion for performance shines on a racetrack. Stay tuned.”
      Vehicle highlights

      CT5-V — The first-ever CT5-V builds on the precision-focused details of the all-new luxury sedan introduced earlier this year to offer elevated road performance and an engaging driving experience.  
      Powered by Cadillac’s high-output 3.0L Twin Turbo V-6 engine, which uses low-inertia turbochargers to enhance power production across the rpm band. It is rated at a Cadillac-estimated 355 horsepower (265 kW), pending SAE certification. 10-speed automatic transmission. Electronic limited-slip rear differential. Standard RWD and available AWD. V-Series performance chassis with Magnetic Ride Control 4.0. Performance Traction Management. Vehicle Control Mode with customizable V-Mode. Brembo front braking system. 19-inch wheels and summer-only performance tires2 (all-season tires available with AWD). Dark exterior accents and V-Series mesh grilles; unique rear diffuser and quad exhaust tips. Super Cruise1 available. Unique performance persona instrument cluster and V-Mode steering wheel control. CT4-V — Developed for a new generation of sedan customers, the first-ever CT4 blends nimble handling and Cadillac’s signature technology. The CT4-V takes these traits further, infusing the brand’s racing DNA for a dynamic, responsive and exhilarating driving experience.   
      Powered by Cadillac’s high-output 2.7L Turbo engine featuring a unique three-step sliding camshaft that helps optimize performance at all speeds. It is rated at a Cadillac-estimated 320 horsepower (239 kW), pending SAE certification. 10-speed automatic. Limited-slip rear differential. V-Series performance chassis with Magnetic Ride Control 4.0 (on RWD) or ZF MVS passive dampers (on AWD). Vehicle Control Mode with customizable V-Mode. Brembo front braking system. 18-inch wheels and summer-only performance tires2 (all-season tires available with AWD). Near-perfect 50/50 weight distribution for an exceptional feeling of balance and control. Dark exterior accents and V-Series mesh grilles; quad exhaust tips, unique rear spoiler design that helps reduce rear lift while increasing grip for the rear tires. Super Cruise1 available. Unique performance persona instrument cluster and V-Mode steering wheel control. MORE TO COME
      The CT4-V and CT5-V go on sale early in the 2020 calendar year, with production at GM’s Lansing Grand River facility in Michigan. Additional product information, as well as details on additional V-Series variants and CT4 Luxury, Premium Luxury and Sport models, will be announced at a later date.

      View full article
  • My Clubs

  • Reader Rides

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×
×
  • Create New...