Jump to content
William Maley

Industry News: Increasing Pickup Truck Prices Are Leaving Average Buyers Out

Recommended Posts

Prices on new pickup trucks have been steadily increasing as more people are choosing them as their family vehicle and in turn are wanting more luxury features. But this rise in prices has been making it harder for the average buyer to afford one.

Data from Edmunds shows through September, the average transaction price for a full-size pickup is $48,377; a 48 percent increase when compared to 10 years ago and 19 percent increased when compared to 2013.

"A 48-percent increase in price is the highest price increase for that time period out of all vehicle categories. Even at $45,000, it prices a lot of people out," said Ivan Drury, senior analyst at Edmunds to the Detroit Free Press.

"There are consumers who can afford the bare bones basic vehicles at $30,000, but once you're shown an option like a ventilated seat versus a cloth seat and it's 90 degrees outside, it becomes a very compelling argument to say yes. Ten years ago, comfort packages weren't offered on trucks. People are saying, 'I want those even if those vehicles are used to haul mulch.' "

A very telling sign that truck prices are beginning to push people out is the massive difference between the expected and the actually average transactional price. Cox Automotive reports that buyers of a full-size pickup expected to pay an average of $38,529 through the month August. The actual average transaction price through August was $47,987 according to Cox.

Also seeing a rise is the average income of truck buyers. Alexander Edwards, president of consultancy Strategic Vision tells the Free Press  that the median household income of a truck buyer has risen form $76,660 in 2009 to $100,305 in 2018. More telling is that the truck buyer has a higher income than a car buyer ($95,355).

Some are beginning to worry that pickup trucks are becoming a bit too expensive.

"In 1988, I sold my first pickup at $20,000 and I thought, 'Man, who could ever afford this?' Now, they're $60,000, $70,000, $80,000. ... I'm not sure everybody wants all that technology, but we're adding all of it. We're actually in the luxury business at those prices," said Charlie Gilchrist, owner of Gilchrist Automotive in the Dallas-Fort Worth area.

A survey done by CarGurus correlates Gilchrist's view. Asking 203 current pickup owners from their user panel, CarGurus reports that owners would call paying $35,000 on a truck a good deal. But increase it to the average price of $45,200 and its too much. Respondents also said they would be willing to give up such features as a automatic open-close tailgate and Wi-Fi hotspot for a lower price.

“This survey showed that pickup truck owners believe some of the new technology is nice to have, but not essential and not worth the price. We’re at an interesting time in the pickup truck category where many people are using their pickup trucks for more than just work. Those looking for a truck purely for work purposes don’t need all of the new luxury features, and those looking for a truck for commuting or leisure don’t need all of the new work features,” said Madison Gross, CarGurus' senior manager of customer insights.

Source: Detroit Free Press


View full article

  • Thanks 1
  • Upvote 1

Share this post


Link to post
Share on other sites

I can really see this. Lotta coin for the new trucks!

  • Like 1

Share this post


Link to post
Share on other sites
33 minutes ago, A Horse With No Name said:

I can really see this. Lotta coin for the new trucks!

So true, the majority of truck buyers do not need or want all the bells and whistles. Yet the dealerships order them this way and as such you end up with Truck Envy and Luxury truck over a practical daily driving truck. Prices need to drop by half.

  • Upvote 1

Share this post


Link to post
Share on other sites
9 minutes ago, dfelt said:

So true, the majority of truck buyers do not need or want all the bells and whistles. Yet the dealerships order them this way and as such you end up with Truck Envy and Luxury truck over a practical daily driving truck. Prices need to drop by half.

Considering that in 1956 a new F series Ford was the equal of something like 16 grand in todays coin...yes.

That being said....the product. OMG.  Colorado or Canyon with a mild lift would look so damned good in my driveway!

Would take a Silverado or Ram also.

Especially a Cummins dually....yeah!

Share this post


Link to post
Share on other sites

48% price increase in 10 years is crazy.  But this is where leases and 8 year car loans come in.  New car dealerships sell monthly payments, not vehicle prices.   The higher the prices go, the longer the loan terms get, and you'll see the auto manufacture finance arms offering 10 year car loans one day.  Which sounds like a recipe for disaster for consumers but people will sign up for it.

Edited by smk4565

Share this post


Link to post
Share on other sites

Full size pickups have become the modern BOF full size family sedan..available in a variety of trim levels, with a variety of trunk sizes.:)    And full size SUVs are the BOF full size wagons of today (they need the fake woodgrain side trim option, IMO).  

One bit of random related weirdness--on eBay today I'm seeing an ad for the new Ram..in Spanish.   Deja Tus Limites Atras..La Nueva Ram 1500.

Edited by Cubical-aka-Moltar
  • Upvote 2

Share this post


Link to post
Share on other sites
1 hour ago, A Horse With No Name said:

Considering that in 1956 a new F series Ford was the equal of something like 16 grand in todays coin...yes.

That being said....the product. OMG.  Colorado or Canyon with a mild lift would look so damned good in my driveway!

Would take a Silverado or Ram also.

Especially a Cummins dually....yeah!

So you would be happy with this in your Driveway!

See the source image

Share this post


Link to post
Share on other sites
49 minutes ago, ccap41 said:

Stereotypical "Bro" wheels look like trash. 

How about Blackout edition?

See the source image

Course I have mixed feelings on adding more fender flares like they did on this.

See the source image

Chevy has nice flares but Meh nose for me.

See the source image

Share this post


Link to post
Share on other sites

Course the big plastic on the bottom also looks like Shit. @ocnblu did it right on his truck when he removed it.

See the source image

Course the ZR2 is not bad looking. Would like this package on the GMC.

See the source image

  • Upvote 1

Share this post


Link to post
Share on other sites

2019 Chevrolet Silverado Custom Trail Boss Double Cab, with only two options:

5.3L V8

Spray-in bedliner

$42,885 (this pricing is according to the NADA website)

I would order mine just like this, it already comes with a good amount of kit... but I would need about $8000 in incentives/discounts.

GM Accessories catalog has part numbers for a remote start kit (necessary for me since I would need to park it outside my garage) and a foglight kit, I would have those installed by the dealer at time of sale.

Edited by ocnblu
  • Upvote 3

Share this post


Link to post
Share on other sites

A '19 Ram 1500 Laramie 4x4 w/ Hemi, brown w/ two tone brown/beige leather buckets, UConnect w/ nav, CD player, 20 inch wheels came out to over $53k.  Alas, it wouldn't fit in my garage, so at the price range I'd go for a Grand Cherokee..

Share this post


Link to post
Share on other sites
31 minutes ago, ocnblu said:

2019 Chevrolet Silverado Custom Trail Boss Double Cab, with only two options:

5.3L V8

Spray-in bedliner

$42,885

I would order mine just like this, it already comes with a good amount of kit... but I would need about $8000 in incentives/discounts.

GM Accessories catalog has part numbers for a remote start kit (necessary for me since I would need to park it outside my garage) and a foglight kit, I would have those installed by the dealer at time of sale.

I could see you rocking this.

2 minutes ago, Cubical-aka-Moltar said:

A '19 Ram 1500 Laramie 4x4 w/ Hemi, brown w/ two tone brown/beige leather buckets, UConnect w/ nav, CD player, 20 inch wheels came out to over $53k.  Alas, it wouldn't fit in my garage, so at the price range I'd go for a Grand Cherokee..

I would rather have the diesel. 

Share this post


Link to post
Share on other sites

. . . . . . .  and you wonder why the Colorado/Canyon and other midsize trucks sell so well.

  • Upvote 1

Share this post


Link to post
Share on other sites
15 hours ago, dfelt said:

How about Blackout edition?

See the source image

Course I have mixed feelings on adding more fender flares like they did on this.

See the source image

Chevy has nice flares but Meh nose for me.

See the source image

Those are all much better! I cannot stand that 95% of aftermarket wheels on trucks and Wranglers are black with silver machined holes and fake bead locks. 

  • Like 1

Share this post


Link to post
Share on other sites

I miss my 1969 Ford Camper Special Pickup. It was an awesome truck that just always ran and never gave me any problems. Yet career took off and I had to move out of state, so extra auto's were sold.

Share this post


Link to post
Share on other sites
14 hours ago, riviera74 said:

. . . . . . .  and you wonder why the Colorado/Canyon and other midsize trucks sell so well.

They are a damned nice product. I park near a white one every day at work....it is really a nice truck. Very impressed, and I am pretty jaded from an automotive/truck point of view.

11 minutes ago, dfelt said:

I miss my 1969 Ford Camper Special Pickup. It was an awesome truck that just always ran and never gave me any problems. Yet career took off and I had to move out of state, so extra auto's were sold.

That Era of Ford gets nothing but love from me. I have a friend who has an early 70's Camper special. Red and white.  He lives in California.....it's rust free and has a 460. He keeps threatening to sell it. If I didn't have a wood shop in my garage, I could see that truck finding a very loving home in Ohio....living a life of luxury under a car cover.

  • Like 1

Share this post


Link to post
Share on other sites
1 hour ago, dfelt said:

I miss my 1969 Ford Camper Special Pickup. It was an awesome truck that just always ran and never gave me any problems. Yet career took off and I had to move out of state, so extra auto's were sold.

Cool...the '67-72 'bump side' and '73-79 'dent side' Ford F-series were great looking trucks, have a lot of charm, IMO.. 

  • Like 1

Share this post


Link to post
Share on other sites

a 2019 lower trim 4 cylinder silverado for me would be just fine, if i want a truck.  I never have had one.  But i don't tow or haul, so i think the 4 banger would work ok.

Share this post


Link to post
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Social Stream

  • Similar Content

    • By Drew Dowdell
      The Best or Nothing.... Or A Nissan.  Almost exactly two years ago we showed you pictures and a report of the forthcoming Mercedes-Benz X-Class. Now unnamed sources have told Germany's Automobilwoche (Automobile Week) that Mercedes' recent profit warning and a board review of the portfolio have caused the company to put the X-Class on the chopping block.
      The X-Class is based in the Nissan Navara with some upgrades to the suspension and a Mercedes-esque interior.  Much of the interior bits are straight from the Mercedes parts bin. The X-Class starts at about $41,000 in base trim and goes up to about $66,000 in top trim, quite a lot of coin for a small pickup.
      Pricing wasn't the only factor limiting sales.  The X-Class was never offered in the biggest truck market, the U.S., instead it was only sold in Europe, Australia, and South Africa.  In those three markets, the company moved only 16,700 units last year.  The X-Class is built at Nissan's plant in Barcelona, Spain where the Nissan Navara and Renault Alaskan are built.
      Mercedes backed out of plans to build the X-Class for South American markets in Argentina back in February, perhaps signaling then the truck's fate.  Further, Daimler may end their partnership with Nissan - Renault as part of a cost saving measure. This would largely be achieved by ending shared projects like the X-Class and the Smart For Two which shares platforms with the Renault Twingo.  The Infiniti QX30 which shares with the Mercedes-Benz GLA has already been canceled. 
      Daimler is trying to save $6.75 billion by 2021 with another $2.25 billion from the Daimler trucks division. In doing so, 10,000 jobs could be cut.

      View full article
    • By Drew Dowdell
      The Best or Nothing.... Or A Nissan.  Almost exactly two years ago we showed you pictures and a report of the forthcoming Mercedes-Benz X-Class. Now unnamed sources have told Germany's Automobilwoche (Automobile Week) that Mercedes' recent profit warning and a board review of the portfolio have caused the company to put the X-Class on the chopping block.
      The X-Class is based in the Nissan Navara with some upgrades to the suspension and a Mercedes-esque interior.  Much of the interior bits are straight from the Mercedes parts bin. The X-Class starts at about $41,000 in base trim and goes up to about $66,000 in top trim, quite a lot of coin for a small pickup.
      Pricing wasn't the only factor limiting sales.  The X-Class was never offered in the biggest truck market, the U.S., instead it was only sold in Europe, Australia, and South Africa.  In those three markets, the company moved only 16,700 units last year.  The X-Class is built at Nissan's plant in Barcelona, Spain where the Nissan Navara and Renault Alaskan are built.
      Mercedes backed out of plans to build the X-Class for South American markets in Argentina back in February, perhaps signaling then the truck's fate.  Further, Daimler may end their partnership with Nissan - Renault as part of a cost saving measure. This would largely be achieved by ending shared projects like the X-Class and the Smart For Two which shares platforms with the Renault Twingo.  The Infiniti QX30 which shares with the Mercedes-Benz GLA has already been canceled. 
      Daimler is trying to save $6.75 billion by 2021 with another $2.25 billion from the Daimler trucks division. In doing so, 10,000 jobs could be cut.
    • By Drew Dowdell
      GM released power figures today for the new inline 6-cylinder diesel engine that will be available in the Chevrolet Silverado and GMC Sierra.  Available at the same price as the 6.2 liter model, GM promises the new engine will change perceptions about diesel performance and refinement.  GM recently announced the delay of the 3.0-liter diesel until the 2020 model year due to emissions certification delays. 
      Paired with a 10-speed automatic transmission, the diesel produces an SAE-certified 277 horsepower and 460 lb-ft of torque with 95 percent of that torque being available at just 1,250 RPM.  Torque peak comes at 1500 rpm and peak horsepower at 3750 rpm.
      The powertrain is setup to offer diesel exhaust braking to help slow the vehicle when the truck is in tow-haul mode, limiting the number of applications of the brakes to save on brake wear. The engine also has a user selective start-stop function to save additional fuel in city driving. 
      2019 CHEVROLET SILVERADO 3.0L DURAMAX TURBO-DIESEL SPECIFICATIONS
      Type:
      Duramax 3.0L DOHC Turbo Diesel I6 
      Bore & Stroke (in. / mm):
      3.30 x 3.54 inches (84mm x 90mm)
      Block Material:
      Aluminum
      Cylinder Head Material:
      Aluminum
      Compression Ratio:
      15.0: 1
      Firing Order:
      1-5-3-6-2-4
      Valvetrain:
      Dual-overhead camshafts, four-valves per cylinder
      Air Delivery:
      Single variable-geometry turbocharger; intercooling system. 42.8-psi / 2.95 bar max boost
      Fuel Delivery:
      High-pressure, common-rail direct injection (36,250 psi / 2500 bar); electronic throttle valve
      Ignition System:
      Compression
      Max Engine Speed:
      5100 rpm
      Additional Features:
      Continuously variable oil pump; engine oil cooler, automatic stop/start, Active Thermal Management,
      Emissions Control:
      Low-pressure Exhaust Gas Recirculation (EGR); Selective Catalyst Reduction on Filter (SCRF)
      Horsepower
      (hp / kW @ rpm):
      277 / 204 @ 3750 (SAE certified)
      Torque
      (lb.-ft. / Nm @ rpm):
      460 / 624 @ 1500 (SAE certified)
      Manufacturing Location (of globally sourced parts)
      Flint, Mich.  
       
       
      Chevy Press release on page 2


      2020 CHEVROLET SILVERADO’S NEW, ADVANCED 3.0L DURAMAX TURBO-DIESEL REDEFINES EXPECTATIONS
      No-compromise engine delivers refinement, performance and efficiency
      2019-06-03
      DETROIT — The all-new 2020 Chevrolet Silverado’s available 3.0L Duramax inline-six turbo-diesel engine adds choice and versatility for full-size truck customers, offering class-leading torque and horsepower in addition to focusing on fuel economy and capability. It is the first-ever inline-six turbo-diesel offered in Chevrolet’s full-size light-duty trucks.
      Chevrolet engineers started with a clean-sheet design and developed an all-new engine that leverages the efficiency and refinement advantages of the inline six-cylinder architecture and incorporates advanced combustion and emissions technologies to optimize performance and efficiency. It is priced identically to the 6.2L V-8 as a $2,495 premium over a 5.3L V-8 model or $3,890 over a 2.7L Turbo model.
      “From the moment the engine is started, to its idle, acceleration and highway cruising, the 3.0L Duramax performance will change perceptions of what a diesel engine can offer in refinement,” said Nicola Menarini, director for Diesel Truck Engine Program Execution. “With advanced technologies that draw on global diesel expertise, it’s a no-compromise choice for those who want the capability and driving range of a diesel in a light-duty truck.”
      Available on LT, RST, LTZ and High Country models, the 3.0L Duramax diesel rounds out the new Silverado’s range of six propulsion choices, each tailored to suit customers’ needs for performance, efficiency, technology and value. It is rated at an SAE-certified 277 horsepower and 460 lb-ft of torque delivering 95 percent of peak torque at just 1,250 rpm. Peak torque is sustained from 1,500 rpm through 3,000 rpm, providing a powerfully smooth and satisfying driving experience.
      The 3.0L Duramax is paired with GM’s 10L80 10-speed automatic transmission, featuring a centrifugal pendulum absorber torque converter that reduces vibrations to improve smoothness, reinforcing its performance, efficiency and refinement. This combination also offers exhaust braking, which uses the diesel engine’s compression to help slow the vehicle, requiring fewer brake applications by the driver when in Tow Haul mode.
      Innovative Engine Technologies
      The inline six-cylinder architecture offers inherent efficiency and refinement, but the team expanded with smart technology choices to help improve efficiency and weight while optimizing the truck experience. A lightweight aluminum block and cylinder head reduce overall mass, and Active Thermal Management enhances efficiency and cold-weather warm-up. Ceramic glow plugs also help with shorter heat-up times and a quicker cold start, meaning the engine block heater is not needed until -22 degrees F.
      Towing is an important part of owning a truck, and customers can gain additional confidence thanks to the exhaust brake available in tow-haul mode. The water charge air cooler, coupled with low pressure EGR, reduces time to torque. The variable geometry turbocharger helps provide a greater balance of performance and efficiency, and an electronically variable intake manifold helps optimize performance across the rpm band.
      Inherently efficient and balanced
      Compared to a DOHC V-6, the inline-six architecture offers greater efficiency from the reduced friction of operating only two camshafts and their associated valvetrain components. The I6 configuration offers the perfect balance of primary and secondary forces, without the need for balancing shafts.
      “In addition to reduced friction, the architecture enables smooth operation,” Menarini said. “The new Duramax 3.0L elevates the 2019 Silverado with one of the most refined and efficient diesel engines in the segment.”
      Along with supporting elements such as a tuned air induction system and other noise-attenuating elements, the 3.0L Duramax delivers exceptional quietness and smoothness at all engine speeds.
      All-aluminum construction and tough rotating assembly
      The 3.0L Duramax cylinder block is made of a cast aluminum alloy that provides the strength required to support the high combustion pressures that occur within a diesel engine, while also offering an approximately 25 percent mass savings over a comparable cast iron engine block. Iron cylinder liners are used within the aluminum block to insure truck durability.
      There are seven nodular iron main bearing caps that help ensure the block’s strength under those high combustion pressures, while also enabling accurate location of the rotating assembly. A deep-skirt block design, where the block casting extends below the crankshaft centerline, also contributes to the engine’s stiffness and refinement. It’s complemented by a stiffness-enhancing aluminum lower crankcase extension attached to the main bearing caps.
      The rotating assembly consists of a forged steel crankshaft, forged steel connecting rods and hypereutectic aluminum pistons. The alloys in the respective castings for the rods and pistons make them lightweight and durable. Silicon is blended with the aluminum for heat resistance and tolerance within the piston cylinders, which enhances performance and makes the engine quiet.
      A thick piston crown — the top of the piston — and reinforced top ring add strength to support the tremendous cylinder pressures enabled by turbocharging and the engine’s high 15.0:1 compression ratio.
      DOHC Cylinder Head and Rear Cam Drive
      Overhead camshafts offer a direct, efficient means of operating the valves, while four valves per cylinder activated by maintenance-free finger followers with hydraulic lash adjusters increase airflow in and out of the engine. This arrangement is integrated on the Duramax 3.0L’s lightweight aluminum cylinder head, which is topped with a lightweight composite cam cover that incorporates the crankcase ventilation and oil separation systems.
      A pair of lightweight, assembled camshafts actuates 28.35 mm diameter (1.12-inch) intake and 24.55 mm diameter (0.97-inch) exhaust valves. The camshaft drivetrain is uniquely located at the rear (flywheel side) of the engine, for greater refinement and packaging considerations for the comparatively long inline-six. A crankshaft-driven chain drives the high-pressure direct-injection fuel pump, while a chain driven by the fuel pump drives both intake and exhaust camshafts. A smaller belt drives the variable flow oil pump from the crankshaft.
      Additional Technology Highlights
      Variable geometry turbocharging enables the Duramax 3.0L engine to deliver class-leading horsepower with minimal effect on overall efficiency. The system uses closed loop controlled vanes position and sophisticated electronic controls to automatically adjust boost pressure to the desired value based on engine running conditions and instantaneous power demand. The liquid-cooled turbocharger features a low-friction ball-bearing shaft and is mounted close to the exhaust outlet of the engine for quicker spool-up of the turbine and quicker light-off of the exhaust catalyst. A water-to-air intercooling system produces a cooler higher density air charge for greater power. Maximum boost pressure is 43,5 psi (300 Kpa) absolute.
      Low-pressure EGR: The Duramax 3.0L utilizes new low-pressure Exhaust Gas Recirculation to optimize performance and efficiency. The EGR system diverts some of the engine-out exhaust gas and mixes it back into the fresh intake air stream, which is drawn into the cylinder head for combustion. That lowers combustion temperatures and rates.
      Traditionally, EGR systems in diesel applications recirculate exhaust gases between the two high-pressure points, the exhaust manifold(s) and intake manifold. However, it generally requires efficiency-robbing assistance from the turbocharger or other supporting elements to achieve the pressure differential required for sufficient EGR flow rates.
      The new low-pressure system adds to the high-pressure system, supporting continual adjustment of exhaust backpressure for more efficient operation. It recirculates gases between the low-pressure points in the exhaust system (downstream of the particulate filter) and after the compressor inlet.
      When the low-pressure EGR is activated by an electronically controlled valve, the engine burns exhaust gas that has already passed through the particulate filter. That increases the turbocharger’s efficiency, which helps overall vehicle efficiency without deteriorating the rate of particulate matter emitted by the engine.
      A variable intake manifold offers dual air intake pathways for each cylinder. Electronically controlled flaps — one for each cylinder — shorten or lengthen the airflow to each cylinder. This optimizes the airflow into the engine and improves performance and responsiveness across the rpm band, particularly at lower engine speeds.
      A variable-pressure oiling system with a continuously variable-displacement vane oil pump enhances efficiency by optimizing oil pressure as a function of engine speed and load. With it, the oil supply is matched to the engine requirements rather than the excessive supply of a conventional, fixed-displacement oil pump. The engine uses low-friction Diesel Dexos 0W20 oil.
      Oil jets located in the block are employed for performance and temperature control. They target the inner core of the piston with an extra layer of cooling, friction-reducing oil. The jets reduce piston temperature, allowing the engine to produce more power and enhance long-term durability than engines without the technology.
      Active Thermal Management helps the engine warm up quickly to achieve and maintain its optimal engine temperature for performance and efficiency over the entire engine operating range. The system uses a three-actuator rotary valve system to distribute coolant through the engine in a targeted manner. It sends heat where it’s needed to warm up the engine to reduce friction and heat the passenger cabin or cools when needed for high-power operation. The Duramax 3.0L also features split cooling between the block and head.
      Common rail direct fuel injection of 2,500 bar (36,250 psi) helps generates class-leading horsepower and torque. The system’s pressure is generated by an engine-driven twin-piston pump sending fuel to solenoid-activated injectors with nine-hole nozzles that support precise metering of the fuel for a smooth idle and lower combustion noise. The fuel system is capable of multiple injections per combustion cycle — up to 10 times per injector — for more consistent and stable combustion performance that translates into smoothness and refinement, particularly at idle.   
      Electronic throttle valve: The Duramax 3.0L features an electronic throttle valve to regulate intake manifold pressure in order to optimize exhaust gas recirculation rates. It also contributes to a smooth engine shutdown via a more controlled method of airflow reduction.
      Ceramic glow plugs used in the Duramax 3.0L heat up more quickly and hotter than conventional metal-based glow plugs, helping the engine start and heat up more quickly in cold weather. The Duramax 3.0L achieves unassisted and assisted starting temperatures of -22 F (-30 C) and -40 F (-40 C) respectively.
      Stop/start technology helps optimize efficiency in city driving. The driver-selectable system shuts off the engine at stoplights and other stop-and-go situations. The engine automatically restarts when the driver takes their foot off the brake.
      ABOUT CHEVROLET
      Founded in 1911 in Detroit, Chevrolet is one of the world's largest car brands, doing business in more than 100 countries and selling more than 4.0 million cars and trucks a year. Chevrolet provides customers with fuel-efficient vehicles that feature engaging performance, design that makes the heart beat, passive and active safety features and easy-to-use technology, all at a value. More information on Chevrolet models can be found at www.chevrolet.com.
      # # #
      2019 CHEVROLET SILVERADO 3.0L DURAMAX TURBO-DIESEL SPECIFICATIONS
      Type:
      Duramax 3.0L DOHC Turbo Diesel I6 
      Bore & Stroke (in. / mm):
      3.30 x 3.54 inches (84mm x 90mm)
      Block Material:
      Aluminum
      Cylinder Head Material:
      Aluminum
      Compression Ratio:
      15.0: 1
      Firing Order:
      1-5-3-6-2-4
      Valvetrain:
      Dual-overhead camshafts, four-valves per cylinder
      Air Delivery:
      Single variable-geometry turbocharger; intercooling system. 42.8-psi / 2.95 bar max boost
      Fuel Delivery:
      High-pressure, common-rail direct injection (36,250 psi / 2500 bar); electronic throttle valve
      Ignition System:
      Compression
      Max Engine Speed:
      5100 rpm
      Additional Features:
      Continuously variable oil pump; engine oil cooler, automatic stop/start, Active Thermal Management,
      Emissions Control:
      Low-pressure Exhaust Gas Recirculation (EGR); Selective Catalyst Reduction on Filter (SCRF)
      Horsepower
      (hp / kW @ rpm):
      277 / 204 @ 3750 (SAE certified)
      Torque
      (lb.-ft. / Nm @ rpm):
      460 / 624 @ 1500 (SAE certified)
       

      View full article
    • By Drew Dowdell
      GM released power figures today for the new inline 6-cylinder diesel engine that will be available in the Chevrolet Silverado and GMC Sierra.  Available at the same price as the 6.2 liter model, GM promises the new engine will change perceptions about diesel performance and refinement.  GM recently announced the delay of the 3.0-liter diesel until the 2020 model year due to emissions certification delays. 
      Paired with a 10-speed automatic transmission, the diesel produces an SAE-certified 277 horsepower and 460 lb-ft of torque with 95 percent of that torque being available at just 1,250 RPM.  Torque peak comes at 1500 rpm and peak horsepower at 3750 rpm.
      The powertrain is setup to offer diesel exhaust braking to help slow the vehicle when the truck is in tow-haul mode, limiting the number of applications of the brakes to save on brake wear. The engine also has a user selective start-stop function to save additional fuel in city driving. 
      2019 CHEVROLET SILVERADO 3.0L DURAMAX TURBO-DIESEL SPECIFICATIONS
      Type:
      Duramax 3.0L DOHC Turbo Diesel I6 
      Bore & Stroke (in. / mm):
      3.30 x 3.54 inches (84mm x 90mm)
      Block Material:
      Aluminum
      Cylinder Head Material:
      Aluminum
      Compression Ratio:
      15.0: 1
      Firing Order:
      1-5-3-6-2-4
      Valvetrain:
      Dual-overhead camshafts, four-valves per cylinder
      Air Delivery:
      Single variable-geometry turbocharger; intercooling system. 42.8-psi / 2.95 bar max boost
      Fuel Delivery:
      High-pressure, common-rail direct injection (36,250 psi / 2500 bar); electronic throttle valve
      Ignition System:
      Compression
      Max Engine Speed:
      5100 rpm
      Additional Features:
      Continuously variable oil pump; engine oil cooler, automatic stop/start, Active Thermal Management,
      Emissions Control:
      Low-pressure Exhaust Gas Recirculation (EGR); Selective Catalyst Reduction on Filter (SCRF)
      Horsepower
      (hp / kW @ rpm):
      277 / 204 @ 3750 (SAE certified)
      Torque
      (lb.-ft. / Nm @ rpm):
      460 / 624 @ 1500 (SAE certified)
      Manufacturing Location (of globally sourced parts)
      Flint, Mich.  
       
       
      Chevy Press release on page 2


      2020 CHEVROLET SILVERADO’S NEW, ADVANCED 3.0L DURAMAX TURBO-DIESEL REDEFINES EXPECTATIONS
      No-compromise engine delivers refinement, performance and efficiency
      2019-06-03
      DETROIT — The all-new 2020 Chevrolet Silverado’s available 3.0L Duramax inline-six turbo-diesel engine adds choice and versatility for full-size truck customers, offering class-leading torque and horsepower in addition to focusing on fuel economy and capability. It is the first-ever inline-six turbo-diesel offered in Chevrolet’s full-size light-duty trucks.
      Chevrolet engineers started with a clean-sheet design and developed an all-new engine that leverages the efficiency and refinement advantages of the inline six-cylinder architecture and incorporates advanced combustion and emissions technologies to optimize performance and efficiency. It is priced identically to the 6.2L V-8 as a $2,495 premium over a 5.3L V-8 model or $3,890 over a 2.7L Turbo model.
      “From the moment the engine is started, to its idle, acceleration and highway cruising, the 3.0L Duramax performance will change perceptions of what a diesel engine can offer in refinement,” said Nicola Menarini, director for Diesel Truck Engine Program Execution. “With advanced technologies that draw on global diesel expertise, it’s a no-compromise choice for those who want the capability and driving range of a diesel in a light-duty truck.”
      Available on LT, RST, LTZ and High Country models, the 3.0L Duramax diesel rounds out the new Silverado’s range of six propulsion choices, each tailored to suit customers’ needs for performance, efficiency, technology and value. It is rated at an SAE-certified 277 horsepower and 460 lb-ft of torque delivering 95 percent of peak torque at just 1,250 rpm. Peak torque is sustained from 1,500 rpm through 3,000 rpm, providing a powerfully smooth and satisfying driving experience.
      The 3.0L Duramax is paired with GM’s 10L80 10-speed automatic transmission, featuring a centrifugal pendulum absorber torque converter that reduces vibrations to improve smoothness, reinforcing its performance, efficiency and refinement. This combination also offers exhaust braking, which uses the diesel engine’s compression to help slow the vehicle, requiring fewer brake applications by the driver when in Tow Haul mode.
      Innovative Engine Technologies
      The inline six-cylinder architecture offers inherent efficiency and refinement, but the team expanded with smart technology choices to help improve efficiency and weight while optimizing the truck experience. A lightweight aluminum block and cylinder head reduce overall mass, and Active Thermal Management enhances efficiency and cold-weather warm-up. Ceramic glow plugs also help with shorter heat-up times and a quicker cold start, meaning the engine block heater is not needed until -22 degrees F.
      Towing is an important part of owning a truck, and customers can gain additional confidence thanks to the exhaust brake available in tow-haul mode. The water charge air cooler, coupled with low pressure EGR, reduces time to torque. The variable geometry turbocharger helps provide a greater balance of performance and efficiency, and an electronically variable intake manifold helps optimize performance across the rpm band.
      Inherently efficient and balanced
      Compared to a DOHC V-6, the inline-six architecture offers greater efficiency from the reduced friction of operating only two camshafts and their associated valvetrain components. The I6 configuration offers the perfect balance of primary and secondary forces, without the need for balancing shafts.
      “In addition to reduced friction, the architecture enables smooth operation,” Menarini said. “The new Duramax 3.0L elevates the 2019 Silverado with one of the most refined and efficient diesel engines in the segment.”
      Along with supporting elements such as a tuned air induction system and other noise-attenuating elements, the 3.0L Duramax delivers exceptional quietness and smoothness at all engine speeds.
      All-aluminum construction and tough rotating assembly
      The 3.0L Duramax cylinder block is made of a cast aluminum alloy that provides the strength required to support the high combustion pressures that occur within a diesel engine, while also offering an approximately 25 percent mass savings over a comparable cast iron engine block. Iron cylinder liners are used within the aluminum block to insure truck durability.
      There are seven nodular iron main bearing caps that help ensure the block’s strength under those high combustion pressures, while also enabling accurate location of the rotating assembly. A deep-skirt block design, where the block casting extends below the crankshaft centerline, also contributes to the engine’s stiffness and refinement. It’s complemented by a stiffness-enhancing aluminum lower crankcase extension attached to the main bearing caps.
      The rotating assembly consists of a forged steel crankshaft, forged steel connecting rods and hypereutectic aluminum pistons. The alloys in the respective castings for the rods and pistons make them lightweight and durable. Silicon is blended with the aluminum for heat resistance and tolerance within the piston cylinders, which enhances performance and makes the engine quiet.
      A thick piston crown — the top of the piston — and reinforced top ring add strength to support the tremendous cylinder pressures enabled by turbocharging and the engine’s high 15.0:1 compression ratio.
      DOHC Cylinder Head and Rear Cam Drive
      Overhead camshafts offer a direct, efficient means of operating the valves, while four valves per cylinder activated by maintenance-free finger followers with hydraulic lash adjusters increase airflow in and out of the engine. This arrangement is integrated on the Duramax 3.0L’s lightweight aluminum cylinder head, which is topped with a lightweight composite cam cover that incorporates the crankcase ventilation and oil separation systems.
      A pair of lightweight, assembled camshafts actuates 28.35 mm diameter (1.12-inch) intake and 24.55 mm diameter (0.97-inch) exhaust valves. The camshaft drivetrain is uniquely located at the rear (flywheel side) of the engine, for greater refinement and packaging considerations for the comparatively long inline-six. A crankshaft-driven chain drives the high-pressure direct-injection fuel pump, while a chain driven by the fuel pump drives both intake and exhaust camshafts. A smaller belt drives the variable flow oil pump from the crankshaft.
      Additional Technology Highlights
      Variable geometry turbocharging enables the Duramax 3.0L engine to deliver class-leading horsepower with minimal effect on overall efficiency. The system uses closed loop controlled vanes position and sophisticated electronic controls to automatically adjust boost pressure to the desired value based on engine running conditions and instantaneous power demand. The liquid-cooled turbocharger features a low-friction ball-bearing shaft and is mounted close to the exhaust outlet of the engine for quicker spool-up of the turbine and quicker light-off of the exhaust catalyst. A water-to-air intercooling system produces a cooler higher density air charge for greater power. Maximum boost pressure is 43,5 psi (300 Kpa) absolute.
      Low-pressure EGR: The Duramax 3.0L utilizes new low-pressure Exhaust Gas Recirculation to optimize performance and efficiency. The EGR system diverts some of the engine-out exhaust gas and mixes it back into the fresh intake air stream, which is drawn into the cylinder head for combustion. That lowers combustion temperatures and rates.
      Traditionally, EGR systems in diesel applications recirculate exhaust gases between the two high-pressure points, the exhaust manifold(s) and intake manifold. However, it generally requires efficiency-robbing assistance from the turbocharger or other supporting elements to achieve the pressure differential required for sufficient EGR flow rates.
      The new low-pressure system adds to the high-pressure system, supporting continual adjustment of exhaust backpressure for more efficient operation. It recirculates gases between the low-pressure points in the exhaust system (downstream of the particulate filter) and after the compressor inlet.
      When the low-pressure EGR is activated by an electronically controlled valve, the engine burns exhaust gas that has already passed through the particulate filter. That increases the turbocharger’s efficiency, which helps overall vehicle efficiency without deteriorating the rate of particulate matter emitted by the engine.
      A variable intake manifold offers dual air intake pathways for each cylinder. Electronically controlled flaps — one for each cylinder — shorten or lengthen the airflow to each cylinder. This optimizes the airflow into the engine and improves performance and responsiveness across the rpm band, particularly at lower engine speeds.
      A variable-pressure oiling system with a continuously variable-displacement vane oil pump enhances efficiency by optimizing oil pressure as a function of engine speed and load. With it, the oil supply is matched to the engine requirements rather than the excessive supply of a conventional, fixed-displacement oil pump. The engine uses low-friction Diesel Dexos 0W20 oil.
      Oil jets located in the block are employed for performance and temperature control. They target the inner core of the piston with an extra layer of cooling, friction-reducing oil. The jets reduce piston temperature, allowing the engine to produce more power and enhance long-term durability than engines without the technology.
      Active Thermal Management helps the engine warm up quickly to achieve and maintain its optimal engine temperature for performance and efficiency over the entire engine operating range. The system uses a three-actuator rotary valve system to distribute coolant through the engine in a targeted manner. It sends heat where it’s needed to warm up the engine to reduce friction and heat the passenger cabin or cools when needed for high-power operation. The Duramax 3.0L also features split cooling between the block and head.
      Common rail direct fuel injection of 2,500 bar (36,250 psi) helps generates class-leading horsepower and torque. The system’s pressure is generated by an engine-driven twin-piston pump sending fuel to solenoid-activated injectors with nine-hole nozzles that support precise metering of the fuel for a smooth idle and lower combustion noise. The fuel system is capable of multiple injections per combustion cycle — up to 10 times per injector — for more consistent and stable combustion performance that translates into smoothness and refinement, particularly at idle.   
      Electronic throttle valve: The Duramax 3.0L features an electronic throttle valve to regulate intake manifold pressure in order to optimize exhaust gas recirculation rates. It also contributes to a smooth engine shutdown via a more controlled method of airflow reduction.
      Ceramic glow plugs used in the Duramax 3.0L heat up more quickly and hotter than conventional metal-based glow plugs, helping the engine start and heat up more quickly in cold weather. The Duramax 3.0L achieves unassisted and assisted starting temperatures of -22 F (-30 C) and -40 F (-40 C) respectively.
      Stop/start technology helps optimize efficiency in city driving. The driver-selectable system shuts off the engine at stoplights and other stop-and-go situations. The engine automatically restarts when the driver takes their foot off the brake.
      ABOUT CHEVROLET
      Founded in 1911 in Detroit, Chevrolet is one of the world's largest car brands, doing business in more than 100 countries and selling more than 4.0 million cars and trucks a year. Chevrolet provides customers with fuel-efficient vehicles that feature engaging performance, design that makes the heart beat, passive and active safety features and easy-to-use technology, all at a value. More information on Chevrolet models can be found at www.chevrolet.com.
      # # #
      2019 CHEVROLET SILVERADO 3.0L DURAMAX TURBO-DIESEL SPECIFICATIONS
      Type:
      Duramax 3.0L DOHC Turbo Diesel I6 
      Bore & Stroke (in. / mm):
      3.30 x 3.54 inches (84mm x 90mm)
      Block Material:
      Aluminum
      Cylinder Head Material:
      Aluminum
      Compression Ratio:
      15.0: 1
      Firing Order:
      1-5-3-6-2-4
      Valvetrain:
      Dual-overhead camshafts, four-valves per cylinder
      Air Delivery:
      Single variable-geometry turbocharger; intercooling system. 42.8-psi / 2.95 bar max boost
      Fuel Delivery:
      High-pressure, common-rail direct injection (36,250 psi / 2500 bar); electronic throttle valve
      Ignition System:
      Compression
      Max Engine Speed:
      5100 rpm
      Additional Features:
      Continuously variable oil pump; engine oil cooler, automatic stop/start, Active Thermal Management,
      Emissions Control:
      Low-pressure Exhaust Gas Recirculation (EGR); Selective Catalyst Reduction on Filter (SCRF)
      Horsepower
      (hp / kW @ rpm):
      277 / 204 @ 3750 (SAE certified)
      Torque
      (lb.-ft. / Nm @ rpm):
      460 / 624 @ 1500 (SAE certified)
       
    • By Drew Dowdell
      RAM sees a Dakota-sized hole in their lineup and FCA CEO Mike Manley says he wants that hole filled fast.  Part of the issue is that Ram currently does not have a platform to use for a mid-size pickup.  The Jeep Gladiator, while considered a mid-size, has a different mission in life. It is positioned, and priced, as a premium product with an MSRP starting over $33,000 where competitors like the Ranger and Colorado start in the mid-$20k range. 
      Furthermore, the new product will not be built on the Gladiator platform, further increasing costs and development time. The current estimate is that the Dakota, if that's what it is called, will be introduced in the 2022 time frame.  That puts RAM rather late to market as Ford has recently released the Ranger, and a new Nissan Frontier is on the way, and even Mitsubishi is working on a truck. 
      In the meantime, RAM plans to keep building the RAM 1500 classic for an extended period of time alongside the new 2020 RAM 1500 model. Fleet and commercial customers like the lower price of the RAM Classic and sales have remained brisk. 

      View full article
  • Recent Status Updates

  • Reader Rides

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×
×
  • Create New...