Jump to content
News
Reviews
Discussons
Activity
Create New...
Close
  • William Maley
    William Maley

    By William Maley •

    Quick Ride: Ram 1500 Rumble Bee Concept

      Going Loud In The Ram 1500 Rumble Bee Concept

    There are days where I consider myself the luckiest person alive. A couple weeks ago, I had the chance to go for a ride in a very special truck. A fellow colleague of mine had the great fortune of getting his hands on the Ram 1500 Rumble Bee concept and was wondering if anyone wanted to check it out. Why not I thought to myself and sent a message to him saying I would like to see it. Before too long, I heard the rumble of a V8 entering my neighborhood and I knew the truck had arrived.

    Now the Rumble Bee Concept debuted last year during the Woodward Dream Cruise. Starting life as a standard 2013 Ram 1500 R/T regular cab with the 5.7L HEMI V8, Ram dug through its toy box and installed a new exhaust system, intake, and 4.10 final drive setup. The truck also got matte yellow paint job with black striping, the Rumble Bee logo, twenty-four inch wheels, and much more.

    Seeing the Rumble Bee Concept in person, it gives the impression that it wants to be seen. During my brief ride in the truck, I couldn't help but not people passing in the other lane or walking notice the bright yellow truck. It probably helped that the exhaust note could be heard throughout the county. The Rumble Bee has two settings for the exhaust, Loud and LOUDER!. In Loud, the Rumble Bee sounds like you fitted an aftermarket exhaust to bring out the magnificent noise of the V8. In LOUDER!, it sounds like you're driving around in a drag car. This is due to the switch closing the exhaust pipe and dropping exhaust below the driver.

    Aside from the noise that could cause your local constabulary to have a nice chat with you, the Rumble Bee concept is very much like the standard Ram 1500. The dash layout is easy to use and the bucket seats are very comfortable. The UConnect system and AC system worked and were nice to have in this concept.

    While I didn't get the chance to drive the Ram 1500 Rumble Bee concept, just getting the chance to see it in person and have a ride was a awesome. The Ram 1500 Rumble Bee concept is mean-looking looking that has a vicious bite to go with it.

    Of course the question comes up of whether or not Ram will put this into production. My guess is maybe. Ram has been tinkering around with a high-performance model by doing a number of concepts, the Rumble Bee being one of them. Even though Dodge has been christened with being the performance brand, I'm sure they would be ok if Ram had something of their own. Maybe they could even have a Hellcat Ram.

    Author's Note: I want to give a huge thanks to Chad Kirchner for bringing over the Ram 1500 Rumble Bee Concept and giving me a ride in it. You can check out Chad's first impressions on the Rumble Bee Concept by heading over to TFLTruck.com. - WM

    William Maley is a staff writer for Cheers & Gears. He can be reached at [email protected] or you can follow him on twitter at @realmudmonster.

    Go to articles

    User Feedback

    Recommended Comments

    William Maley

    Very Cool, Did you get any pictures of the underside with this muffler system or the engine bay? Always cool to see how the OEM does things.

     

    I do have a shot of the engine bay, but I think its still on my camera. Let me go find it and I'll upload it here in a bit.

    Link to comment
    Share on other sites


    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

    ×

  • google-news-icon.png



  • google-news-icon.png

  • Subscribe to Cheers & Gears

    Cheers and Gears Logo

    Since 2001 we've brought you real content and honest opinions, not AI-generated stuff with no feeling or opinions influenced by the manufacturers.

    Please consider subscribing. Subscriptions can be as little as $1.75 a month, and a paid subscription drops most ads.*
     

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Community Hive Community Hive

    Community Hive allows you to follow your favorite communities all in one place.

    Follow on Community Hive

  • Similar Content

  • Posts

    • David
      Random Thoughts Thread

      By David · Posted

      I am not aware of travel cases for internal drives. Usually you have the drive and once you have made sure you own static electricity is discharged on your body, open the computer and unplug the power cable and data cable to the HD. Then you unscrew the screws holding the drive in. Put the drive into an Anti-Static bag and then usually into a box that has foam padding on all sides to protect the drive and then tape it up to close it.  With both drives in their proper storage bags, you can then have both drives in between foam insulation for handling any dropping of the box, etc. Pack them in a box and tape shut, should then easily handle going through your carry on or checked in luggage. To ship a hard drive, you need to: Secure the hard drive in its original packaging or anti-static bag. If you don't have an anti-static bag, place the drive into a zipped freezer bag to prevent any moisture getting into the drive during transit. Sandwich the drive between foam or wrap it in bubble wrap to absorb any minor shocks. Put the hard drive in a padded shipping box. Close and seal the box. Label your package. Amazon.com : hard drive shipping box This is pretty much all you need.
    • David
      Airplanes

      By David · Posted

      Either a co-pilot first time landing or something truly went wrong on the plane.
    • trinacriabob
      Random Thoughts Thread

      By trinacriabob · Posted

      The incoming rectangular lamps on many GM cars in that era made them much more attractive.  They made a big difference. Now, as far the powerplant went, the notion of 500 cubic inches was mindboggling even during the malaise era.  If you want to see someone's jaw drop, tell a European that their engines have 8200 cc or 8.2 liters.  For those who aren't driving the occasional Mustang or Camaro you see, they freak out at anything over 2,500 or 3,000 cc.
    • trinacriabob
      Random Thoughts Thread

      By trinacriabob · Posted

      Thank you for the response. I want to reinstall them into the computers, especially the "newer" one.  The old one has been a real champ.   The reason for not leaving them in the desktop is that the basic tower might have to be transported ... and not by me.  That means it will be out of my possession for a while.  Since the HDs would be traveling with me, they'll have to get scanned through airport security a time or two.  I'm guessing that shouldn't mess with the data.   I've already backed up the C drive on several large 1 TB portable hard drives.  I don't want to touch the basic functions and files on the computers since I don't know how that all works.  I stay away from the drives and files I am not familiar with. I tend to donate other things to charity.   I did give the Regal I once owned to charity.   A good friend told me that, about a month or two later, he saw it being driven around the city by its new owner and we had a good laugh. This is what I want to do.  I'm just trying to figure out if the guy or gal at Office Depot can size a case based on looking up the unit and the HD in it.  Any ideas on that part?  Or should I do that and approximate the size and weight of the part to get the cases?
    • trinacriabob
      Airplanes

      By trinacriabob · Posted

      I'm wondering about a lot of things related to this.  I am sure that, sadly, the passengers inside were jolted.  This is way different from a rough landing. Why was it even necessary to do it?  What was going on at the airport property at that time?  How does one even pull this off?  I've seen some vids of where they barely touch and then go off again, but this one looks way more complicated.

  • Who's Online (See full list)

    • There are no registered users currently online

  • My Clubs

×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

I've whitelisted
Continue without support

Write what you are looking for and press enter or click the search icon to begin your search

Change privacy settings