Jump to content
  • William Maley
    William Maley

    Rumorpile: China's Wanxiang Group To Launch Karma With Making Any Changes

    Sign in to follow this  

      Fisker's New Owners Plans To Keep The Karma The Same. Does That Mean Fires Appearing Once Again?

    Fisker's new owner, the Wanxiang Group wants to get the Fisker Karma back on the marketplace as soon as possible. How fast? According to a report from Reuters, the company is planning to stick with the original 2012 design.

    A source tells Reuters the reason for sticking with the older design is due to not going through crash testing and certification again.

    "It will have to be nearly identical to the 2012 model, or it would need to go through (safety) testing and certification again. I don’t think they want to put a lot of engineering into it either, as well as probably use up some of the old parts that are in inventory," said the source.

    However this plan presents a problem. Suppliers who dealt with Fisker aren't happy with the brand because of losses suffered with the company going under.

    "They lost money and had dedicated facilities that were severely underutilized. Many scrapped their tools or took them out of their facilities," another source said.

    Now a source close to Fisker says the Karma will be slightly different, but wouldn't go into detail about what will change.

    “Not 100 percent identical. The new Karma will be different in many key areas. It will have noticeable upgrades.”

    Source: Reuters

    William Maley is a staff writer for Cheers & Gears. He can be reached atwilliam.maley@cheersandgears.com or you can follow him on twitter at @realmudmonster.

    Sign in to follow this  


    User Feedback

    Recommended Comments

    Either way, bad Karma is what this is all about. Plus China is always super cheap and so I would NOT want to be a supplier to them as I would not expect to be able to make money.

    Share this comment


    Link to comment
    Share on other sites


    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.




  • Similar Content

    • By William Maley
      This week, Hagerty obtained a document from General Motors' executive director in charge of program management, Michelle Braun that says development on future car and truck programs has been paused due to the COVID-19 outbreak. But the document also mentions some intriguing information on upcoming powertrains for the C8 Corvette. Here are the details,
      Corvette Z06: 5.5L DOHC V8 known as the LT6 that will produce 650 horsepower and 600 pound-feet of torque. No mention of any type of forced-induction. Corvette Gran Sport: 6.2L OHC V8 with a hybrid system that's expected to produce 600 horsepower and 500 pound-feet of torque. Corvette ZR1: Twin-Turbo 5.5L DOHC V8, dubbed LT7. Output is expected to be 850 horsepower and 800 pound-feet. Corvette Zora: The powerhouse of the C8, it will take the Twin-Turbo LT7 and augment with a hybrid system. This is expected to produce 1,000 horsepower and 975 pound-feet of torque. Hagerty's report says the rollout of the new engines will begin in 2022 with the LT6, but the COVID-19 outbreak may push the plans back.
      Source: Hagerty

      View full article
    • By William Maley
      This week, Hagerty obtained a document from General Motors' executive director in charge of program management, Michelle Braun that says development on future car and truck programs has been paused due to the COVID-19 outbreak. But the document also mentions some intriguing information on upcoming powertrains for the C8 Corvette. Here are the details,
      Corvette Z06: 5.5L DOHC V8 known as the LT6 that will produce 650 horsepower and 600 pound-feet of torque. No mention of any type of forced-induction. Corvette Gran Sport: 6.2L OHC V8 with a hybrid system that's expected to produce 600 horsepower and 500 pound-feet of torque. Corvette ZR1: Twin-Turbo 5.5L DOHC V8, dubbed LT7. Output is expected to be 850 horsepower and 800 pound-feet. Corvette Zora: The powerhouse of the C8, it will take the Twin-Turbo LT7 and augment with a hybrid system. This is expected to produce 1,000 horsepower and 975 pound-feet of torque. Hagerty's report says the rollout of the new engines will begin in 2022 with the LT6, but the COVID-19 outbreak may push the plans back.
      Source: Hagerty
    • By Drew Dowdell
      According to the Rumorpile, Toyota is working on bringing back the Venza, a car that went out of production after 2015. The original Venza did not sell very well, partially due to its wagon-like shape and also relatively high pricing.  It also lacked any off-road pretense that typically comes with a crossover.
      The problem for Toyota is that there is a large Venza sized gap in their SUV lineup between the RAV-4 and Highlander. This time around, the Venza would ditch the wagon looks and instead be a true crossover along the lines of the Chevrolet Trailblazer, Honda Passport, and Ford Edge. There is a possibility that the Venza would come in only hybrid form using the same 2.5-liter setup with rear electric motor that the Highlander uses. 
      If the rumors prove true, you could see a new Venza hit the auto show circuit as early as 2021. 

      View full article
  • Posts

  • Social Stream

  • Today's Birthdays

    1. ForzaJersey
      ForzaJersey
      (30 years old)
    2. Oracle of Delphi
      Oracle of Delphi
      (51 years old)
  • Who's Online (See full list)

  • My Clubs

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×
×
  • Create New...