Jump to content
Create New...
  • 💬 Join the Conversation

    CnG Logo SQ 2023 RedBlue FavIcon300w.png
    Since 2001, Cheers & Gears has been the go-to hub for automotive enthusiasts. Join today to access our vibrant forums, upload your vehicle to the Garage, and connect with fellow gearheads around the world.

     

  • William Maley
    William Maley

    Mitsubishi Admits To Using Non-Compliant Fuel Economy Tests Since 1991

      Mitsubishi's manipulation of fuel economy numbers goes further than anyone expected


    Last week, Mitsubishi admitted that it had manipulated fuel economy figures for 625,000 vehicles sold in Japan. But today, the scandal has only grown as the Japanese automaker revealed that it used fuel economy testing methods that were not compliant with Japanese regulations since 1991.

     

    Reuters reports that Mitsubishi was compiling data for fuel economy tests using U.S. standards ( focuses on higher-speed, highway driving) and not Japanese standards (focuses more on city driving).

     

    Since Mitsubishi has come clean about the manipulation last week, the company has lost half of its market value (about $3.9 billion). This has also brought back memories of a scandal Mitsubishi Motors was embroiled in fifteen years ago with covering up customer complaints and vehicle defects for more than 20 years.

     

    Last week, Japanese authorities raided one of Mitsubishi's R&D offices. The Japanese Government has also asked Mitsubishi to submit a report on the manipulation by tomorrow. Meanwhile, U.S. regulators are pressing Mitsubishi to see if any vehicles sold here were involved in the manipulation.

     

    Mitsubishi announced that it has brought in three lawyers to conduct an investigation into the scandal. A report is expected in three months.

     

    Source: BBC News, Reuters, Mitsubishi

     

    Press Release is on Page 2


     

    Tokyo, April 26, 2016

     

    Regarding the Report to MLIT Concerning Improper Conduct in Fuel Consumption Testing of Vehicles Manufactured by Mitsubishi Motors Corporation

     

    The following is a summary of the report submitted by Mitsubishi Motors Corporation (MMC) to the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) today, pursuant to instructions received from MLIT on April 20 to investigate improper conduct in fuel consumption testing of vehicles manufactured by MMC.

     

    Report Summary

     

    1.Background to the improper conduct of MMC mini-car fuel consumption testing data

     

    (1) Four grades of the model year 2014 eK Wagon and Dayz (submitted in February 2013) were produced—a fuel-economy grade, a standard grade, a turbo grade and a 4WD grade. During development of the fuel-economy grade, the fuel consumption target, which had initially been 26.4km/l (in February 2011), was revised upward over a series of internal meetings until finally being set at 29.2km/l (February 2013).
    (2) Driving resistance data were obtained for that fuel-economy grade using a "high-speed coasting test," which differed from the coasting test required by the applicable laws and regulations in Japan. A relatively low value was selected from among the test results for use as the driving resistance value in order to give the appearance of greater fuel consumption. Data for the remaining three grades were calculated without testing based on the data for the fuel-economy grade.
    (3) The data submitted for the model year 2014 eK Space and Dayz Roox (submitted in October 2013), the model year 2015 eK Wagon and Dayz (submitted in March 2014), the model year 2015 eK Space and Dayz Roox (submitted in December 2014), and the model year 2016 eK Wagon and Dayz (submitted in June 2015) were all calculated without testing based on the data for the model year 2014 eK Wagon and Dayz to achieve the fuel consumption targets.

     

    2. The following is the timeline leading up to the use of the "high-speed coasting test" differing from the test required by the applicable laws and regulations in Japan. We are currently investigating the reasoning behind each of the decisions outlined below.

     

    (1) In 1991, the coasting test was designated as the method for testing driving resistance under the Road Transport Vehicle Act, but MMC began testing vehicles for the Japanese market using a different method, the "high-speed coasting test".
    (2) In January 1992, a method was developed to reverse-calculate coasting time using driving resistance.
    (3) In January 2001, a test was run that compared the coasting test to the "high-speed coasting test," and the difference in results was found never to exceed 2.3%.
    (4) In February 2007, the testing manual was updated to add that "TRIAS (i.e., the coasting test) is to be used for DOM (i.e., vehicles for sale in Japan)." Nevertheless, the "high-speed coasting test" continued to be used thereafter.

     

    3. Future direction of investigations

     

    (1) While some progress has been made in investigating the events described in sections 1 and 2 above, we will continue to work to discover the causes of this improper conduct and who is responsible.
    (2) Sufficient investigation has not been made into MMC vehicles other than the mini-cars described above; we plan to submit a separate report after looking into those models.

     

    Establishment of Special Investigation Committee

     

    In connection with the certification process for the mini-cars manufactured by Mitsubishi Motors Corporation ("MMC"), MMC hereby notifies that, yesterday, the board of directors decided to establish a special investigation committee (the "Committee") consisting of only external experts.
    MMC expresses its most sincere apologies to all of our customers, shareholders, and stakeholders for any inconvenience or concern caused by this occasion.

     

    1: Background for the establishment of the Committee

     

    As announced, on April 20, 2016, in the press release titled "Improper conduct in fuel consumption testing on products manufactured by Mitsubishi Motors Corporation (MMC)," it has been revealed that, in the certification process for mini-cars manufactured by MMC, with respect to the fuel consumption testing data submitted to the Ministry of Land, Infrastructure, Transport, and Tourism, MMC conducted testing improperly, to present better fuel consumption rates than the actual rates; and that the testing method was also different from the one required by Japanese law (the "Matter"). For the sake of ensuring an objective and thorough investigation into the Matter, MMC has established this Committee in a way such that all members would be external experts independent from MMC.

     

    2: Membership and activities of the Committee

     

    i Membership of the Committee

     

    The Committee is composed of the members, as follows, who have no conflicts of interest with MMC. Therefore, MMC has recognized no factor that would harm the independence and neutrality of the Committee. Further, MMC is considering appointing experts with technical knowledge to participate in the investigation.

     

    Committee Chair: Keiichi WATANABE, Attorney at Law
    (former Superintending Prosecutor, Tokyo High Prosecutors Office)
    Committee Member: Yoshiro SAKATA, Attorney at Law
    Committee Member: Genta YOSHINO, Attorney at Law

     

    ii Activities

     

    The Committee shall perform the following activities pursuant to MMC's delegation.

     

    I
    Investigation to uncover the facts surrounding the Matter, including review of related documents and data, and interviews with the related people.
    II
    Investigation to confirm the existence of other improper conduct similar to the Matter, and uncover the facts, if it does.
    III
    Analysis of the cause of the Matter, and a suggestion on measures to prevent recurrence.

     

    3: Schedule moving forward
    The Committee shall investigate the Matter for about the next three months, and make a report on its results. MMC plans to disclose the report in a timely manner.

    User Feedback

    Recommended Comments



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.




  • Support Real Automotive Journalism

    Cheers and Gears Logo

    Since 2001, Cheers & Gears has delivered real content and honest opinions — not emotionless AI output or manufacturer-filtered fluff.

    If you value independent voices and authentic reviews, consider subscribing. Plans start at just $2.25/month, and paid members enjoy an ad-light experience.*

    You can view subscription options here.

    *a very limited number of ads contain special coupon deals for our members and will show

  • Similar Content

  • Posts

    • That makes South Korean cars and Chinese cars to maybe sometime in the future have manufacturing plants of cars, batteries, anything related in the automotive supply chain to be built in Canada...replacing a centuries old partnership with detroit's automobile industry.  detroit's automobile industry is kowtowing and bowing to king trump the dicktator and will soon close down its manufacturing industry in Canada.  This is Canada protecting its own automotive industry.  And I personally say:  Phoque general motors!!! Phoque ford motor company!!!   Phoque chrysler corp!!! Phoque tesla!!! Phoque the united states of america!!!  I say bring on the Asian car industry!!!    Now...time to replace our aging american fighter jets with something more Swedish!!!  
    • https://www.ctvnews.ca/business/autos/article/ottawa-south-korea-in-talks-to-bring-auto-manufacturing-to-canada-sources-2/   The federal government has signed a memorandum of understanding (MOU) with the Republic of Korea that includes discussions to bring auto manufacturing to Canada, two sources told CTV News. The MOU, which is not binding, calls for closer industrial cooperation on the “future of mobility” –including talks on the auto sector – and was signed by Industry Minister Melanie Joly and her South Korean counterpart, Minister Jung-Kwan Kim, after they met in Ottawa on Tuesday. The talks, which are in early stages, involve the possibility of manufacturing vehicles or auto parts and batteries.   Discussions stemmed from South Korea’s push to win the contract to replace Canada’s aging fleet of submarines. On Monday, both Hyundai and Hanwha officials were part of a Canada-Korea auto forum in Toronto hosted by South Korea’s chief trade envoy. At that time, several Canadian auto executives pitched Hyundai about moving some manufacturing to Canada. Flavio Volpe, the president of the Automotive Parts Manufacturer’s Association (APMA), says he made a pitch to the Korean delegation to make electric vehicles in Ontario.
    • Personally I think GM is too late to the Hybrid party and rather than spend and write off all the billions of dollars on their EVs that are actually selling well, they should have stayed the course and not followed Stupid Ford and Idiot47. GM has a 'handful of hybrids' coming - but are they the ones you want? I do not see GM actually doing well in this space as they are already too far behind.
    • On a more positive note, travel related stuff ... A historic milestone was achieved by Cunard Line within the last week.  When she was built, Queen Mary 2 (QM2) was too big to transit the Panama Canal.  The same was true for other supersized passenger ships.  In the interim, new larger locks were engineered and put into service. https://travelweekly.com.au/queen-mary-2s-first-transit-through-panama-canal-on-way-to-australia/ I saw the QM2 enter San Francisco Bay in 2007 because I was living out West.  It came in on a Sunday and I spent the weekend south of the city and near SFO.  I went there in a rented 2007 Monte Carlo costing less than $25 a day and stayed at one of the cheap chain hotels near SFO costing about $50 a night, which was ridiculously cheap even then. The ship went around South America and sailed northward up the Pacific.  As such, it's not a trip they would be making too often with the QM2. QM2 transited the Panama Canal for the first time just days ago.  She is headed to Los Angeles AND San Francisco.  To clarify the article's headline, Australia is just its next leg - this is the full world cruise.  She was last in Los Angeles in 2006 when she saluted her namesake Queen Mary and last in San Francisco in 2007 and seeing the passage under the Golden Gate Bridge was unforgettable.  These were the only visits to these ports.  With the new Panama Canal locks, her visiting the North Pacific Ocean and its major ports is much more likely to be on future world voyages. In the Panama Canal transit, the nail biter was supposedly going under the Bridge of the Americas - the one with the curved top.  I saw this YouTube with passengers cheering and motorists up above honking. I blame my parents for this!  They took us across the Atlantic a time or two too many when we were kids and this fascination began.
  • Who's Online (See full list)

  • My Clubs

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search