Jump to content
Create New...
  • 🚗 Your People Are Here. Get In.

    The internet is full of car content. This is the community.

    Cheers & Gears has been bringing enthusiasts together since 2001. Join the conversation, show off your garage, and find your people.

  • William Maley
    William Maley

    Interactive Review: 2012 Volkswagen Passat 2.5 SE

    William Maley

    Staff Writer - CheersandGears.com

    July 11, 2012

    As I teased in the Mitsubishi Outlander GT S-AWC interactive review, there are two vehicles in the Cheers & Gears Detroit garage this week. The second vehicle is this, the 2012 Volkswagen Passat 2.5 SE. Its a midrange model and comes equipped with a 2.5L five-cylinder engine producing 170 HP and 177 lb-ft of torque. You have the choice between a six-speed manual or as in this Passat, an automatic.

    First impressions so far:

    • Exterior is a bit plain.
    • 2.5L is a bit of odd engine with acceleration. Starting off, there seems to be no power. Get a little higher in the RPMs and boom, there's power and rapid acceleration.
    • Like the touchscreen radio, now if they would do a large navigation and not a three inch deal.
    • How is Volkswagen getting away calling this a midsize? The large back seat alone makes you think this.

    I'll have more updates as the week goes on. Until then, drop your questions about the Passat off.

    Update #1: Sorry for not updating this till today. Unfornately, I've been busy with a few other items that took up my time.

    Anyways, the Passat is impressing me.. Mostly. The 2.5L is not the best engine for the Passat or any Volkswagen vehicle. Not the most powerful, nor the smoothest engine in its class. I wonder if it would rather be doing something else, like knitting. However, the 2.5L has been delivering some impressive fuel economy. My average so far is 28.2 MPG, which happens to be an MPG higher than the Kia Optima from last week. Also, I was able to match the Passat's highway fuel economy number of 31 MPG over the weekend. The Optima does beat it by 2 MPG though on that same loop.

    The exterior and interior are growing on me. It's clean and simple. For most buyers in the midsize market, thats what they really want.

    I'll have another update before the Passat heads back with some more thoughts. Drop off your questions in the meantime.

    William Maley is a staff writer for Cheers & Gears. He can be reached at [email protected] or you can follow him on twitter at @realmudmonster.


    User Feedback

    Recommended Comments

    Do you mean the back seat is large or small?

    Is it a DSG or an automatic...DSG, right?

    Fuel economy? I am assuming not good...maybe 22-23 overall?

    Impressions of interior quality and quality of dashboard controls?

    Is this a car you could see yourself buying?

    Link to comment
    Share on other sites

    Do you mean the back seat is large or small?

    Back seat is large.. Like flagship sedan large. Thanks for the pointing that out, I fixed that in my post

    Is it a DSG or an automatic...DSG, right?

    Nope, regular six speed automatic. DSG is only for the TDI and 3.6L V6

    Fuel economy? I am assuming not good...maybe 22-23 overall?

    Not sure at the moment. I'll have an update on that either tomorrow or Friday

    Impressions of interior quality and quality of dashboard controls?

    Its ok. Soft and hard touch plastics are where you expect. The leatherette seats feel a bit weird. Controls are solid and good quality.

    Is this a car you could see yourself buying?

    Not this model. Possibly the diesel.

    Link to comment
    Share on other sites

    Such a bland car to look at, this tends to tell me it would be driven by someone who always pisses off the rest of us by getting in the left hand land and driving 10 under the posted speed limit.

    In your description of the 5 cyl engine, you say slow and then picks up. So it sounds like the 5 cyl in the Chevy and GMC small trucks. Those engines seem to be slow till you rev them. How would you compare it to other 5 cyl engines?

    Link to comment
    Share on other sites

    In your description of the 5 cyl engine, you say slow and then picks up. So it sounds like the 5 cyl in the Chevy and GMC small trucks. Those engines seem to be slow till you rev them. How would you compare it to other 5 cyl engines?

    Tough for me to answer since the only other 5 cyl engine I have experience is my 95 Volvo 850 Turbo and it doesn't really have the slow till you rev problem.

    Link to comment
    Share on other sites

    i sold an 11 sonata to a customer the other day who had a rental car due to body shop work. his rental was a 2.5 2012 passat, and he didn't like it.....bought a sonata. The sonata is better than the 2.5 VW.... i've driven the 2.5 and TDI passats and neither stoked me. the 2.5 was slow and interior is not great. sheet metal is thin, car has room I give it that much.

    The new Passat is not going to make sense until they get a decent 4 cylinder mill in it. Otherwise, you overpay for the v6 or the diesel. Altimas, Sonatas, Fusions, Malibus, so many other choices.

    Link to comment
    Share on other sites

    i sold an 11 sonata to a customer the other day who had a rental car due to body shop work. his rental was a 2.5 2012 passat, and he didn't like it.....bought a sonata. The sonata is better than the 2.5 VW.... i've driven the 2.5 and TDI passats and neither stoked me. the 2.5 was slow and interior is not great. sheet metal is thin, car has room I give it that much.

    The new Passat is not going to make sense until they get a decent 4 cylinder mill in it. Otherwise, you overpay for the v6 or the diesel. Altimas, Sonatas, Fusions, Malibus, so many other choices.

    See, I don't think the sheet metal is thin. Thin would be the Mitsubishi Outlander which has a very tinny sound when opening and closing doors.

    As for the interior, I think its ok. It's not the most sexy interior at all, but everything is put together well and works.

    I do hope the rumor of a 1.8T for the Passat comes true.

    Link to comment
    Share on other sites

    the rear quarters of the new passat are quite thin and flexy were my recollection from playing with them at the auto show.

    people wonder why GM and Fords are so heavy, they at least keep sheet metal on most of their models that won't flex and dent super easy, thicker and heavier.

    Link to comment
    Share on other sites

    i sold an 11 sonata to a customer the other day who had a rental car due to body shop work. his rental was a 2.5 2012 passat, and he didn't like it.....bought a sonata. The sonata is better than the 2.5 VW.... i've driven the 2.5 and TDI passats and neither stoked me. the 2.5 was slow and interior is not great. sheet metal is thin, car has room I give it that much.

    The new Passat is not going to make sense until they get a decent 4 cylinder mill in it. Otherwise, you overpay for the v6 or the diesel. Altimas, Sonatas, Fusions, Malibus, so many other choices.

    The only VW I could really see buying is either GTI or DI Golf, IIRC both are built like German cars and built in Wolfs-burg.

    i sold an 11 sonata to a customer the other day who had a rental car due to body shop work. his rental was a 2.5 2012 passat, and he didn't like it.....bought a sonata. The sonata is better than the 2.5 VW.... i've driven the 2.5 and TDI passats and neither stoked me. the 2.5 was slow and interior is not great. sheet metal is thin, car has room I give it that much.

    The new Passat is not going to make sense until they get a decent 4 cylinder mill in it. Otherwise, you overpay for the v6 or the diesel. Altimas, Sonatas, Fusions, Malibus, so many other choices.

    See, I don't think the sheet metal is thin. Thin would be the Mitsubishi Outlander which has a very tinny sound when opening and closing doors.

    As for the interior, I think its ok. It's not the most sexy interior at all, but everything is put together well and works.

    I do hope the rumor of a 1.8T for the Passat comes true.

    I have a friend who is like the rain man of everything VW and he says 1.8 T is coming to Passat for sure...we will see...

    the rear quarters of the new passat are quite thin and flexy were my recollection from playing with them at the auto show.

    people wonder why GM and Fords are so heavy, they at least keep sheet metal on most of their models that won't flex and dent super easy, thicker and heavier.

    The whole Fusion feels super well built to me. If I could force myself to buy a normal 4 door car and it wasn't going to be a Verano, the Fusion would be a high choice for me.

    Link to comment
    Share on other sites



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.




  • Support Independent Automotive Journalism

    25 years of honest automotive coverage — because someone has to do it.

    Cheers & Gears has never been filtered by manufacturer relationships or driven by algorithm. Just real people, real opinions, and a genuine love of cars. Subscribers keep the lights on and get an ad-light experience starting at $2.25/month.*

    View subscription options

    *A small number of ads feature member-exclusive coupon deals and will still appear.

  • Similar Content

  • Posts

    • PADM faults may seem minor, but they can affect overall vehicle performance and driving safety. Pain point: OEM sensor is not securely fixed, and repairs are expensive Our product features: Mechanical chip locking, CNC one-piece aluminum housing, plug-and-play design, OEM-level calibration With Lumistag, you can: Avoid costly full engine mount replacements Improve vehicle durability and system reliability Restore precise performance and safe driving We address the real problem with a professional, cost-effective, and reliable solution.   https://lumistag.com/
    • A couple German phrases I know are ' Bitte ture schliessen' (please close the door, which I learned on the Milan to Venice train 20+ years ago, and 'fahrt nicht bumplitz' (do not drive to Bumplitz) which I read on a Swiss newspaper headline and it stuck in my head...
    • I've learned a few choice phrases in German. Recently, a few buses quarreled with each other by extended honking at a Sicilian airport.   There will always be a German or two or three on the shuttle buses, leaving the airport so I turned to one and said, "Die Sizilen ist unterhaltsam."  That means "Sicily is entertaining." One of the first things I learned is "die Sieben-vier-sieben is sehr gut."  That means "the 747 is very good."
    • I have no clue about current American music and I don't like what I hear.  I think it really peaked in the seventies, eighties and nineties ... and younger people who come to know that music also come to admit that same thing.
    • For Porsche owners long plagued by PADM system malfunctions, there is no longer any need to resort to blindly expensive repairs. The original factory sensors feature a rudimentary design; unable to withstand the daily stresses of high temperatures and road vibrations, detachment and failure have become the norm—leading to repetitive repairs that drain both time and money. Lumistag has professionally engineered a compatible sensor solution, custom-tailored specifically for the entire Porsche 911 and 718 model ranges. Featuring comprehensively upgraded craftsmanship and a robust, solid internal structure, these sensors offer anti-aging and wear-resistance capabilities that far exceed those of the original factory parts. Easily eliminate all fault warnings and bid farewell to chassis-related anomalies once and for all. Offering exceptional value without unnecessary markups, these sensors feature a non-destructive, "plug-and-play" installation process that requires no modification to the vehicle's original wiring. Built for durability and longevity, they represent the premier choice for Porsche owners seeking high-quality maintenance and repair solutions. https://lumistag.com/
  • Who's Online (See full list)

    • There are no registered users currently online
  • My Clubs

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search