Jump to content
William Maley

Land Rover News: Rumorpile: A New Modular Platform To Debut with Defender

Recommended Posts

The next-generation Land Rover Defender has had quite the lengthy development with various changes taking place. We have reported that the new Defender will not look like the DC 100 concepts shown earlier this decade. There is another change afoot.

According to Autocar, Land Rover has decided to make the new Defender to debut the Modular Longitudinal Architecture (MLA). Previously, the Defender was expected to use the Premium Lightweight Architecture (PLA) - what underpins the Discovery and a number of Range Rover models. But MLA will be replacing PLA as it will be lighter and offer more flexibility to be used in more models. Using the Defender makes sense as its being redone from the ground up, and may explain the lengthy delay in development.

One other interesting tidbit is the Defender will be built in Slovakia, not Great Britain like the previous model. Autocar says the Defender will begin production in 2020.

There are some other tidbits concerning other Land Rover and Jaguar models in Autocar's report

  • The next-generation Range Rover Evoque is said to be debuting later this year at the LA Auto Show, with sales beginning in the new year. It will use a heavily reworked version of its current platform that will be known as Premium Transverse Architecture (PTA). This will allow a new plug-in hybrid model that will use a new three-cylinder Ingenium diesel engine - don't expect to see it here.
  • Jaguar's large crossover, known as J-Pace will go into production in 2020. It is understood it will use MLA.
  • Another rumor about the Ingenium straight-six. Reportedly, JLR will use a high-performance version with electric turbochargers to replace their V8 engines.

Source: Autocar


View full article

Share this post


Link to post
Share on other sites

plug-in hybrid model that will use a new three-cylinder Ingenium diesel engine 

That is their smartest move to date for a plug-in hybrid with generator.

Share this post


Link to post
Share on other sites

New modular platforms are always a good idea, especially if you sell relatively few vehicles at high(ish) prices.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Social Stream

  • Similar Content

    • By Drew Dowdell
      According to the Rumorpile, Toyota is working on bringing back the Venza, a car that went out of production after 2015. The original Venza did not sell very well, partially due to its wagon-like shape and also relatively high pricing.  It also lacked any off-road pretense that typically comes with a crossover.
      The problem for Toyota is that there is a large Venza sized gap in their SUV lineup between the RAV-4 and Highlander. This time around, the Venza would ditch the wagon looks and instead be a true crossover along the lines of the Chevrolet Trailblazer, Honda Passport, and Ford Edge. There is a possibility that the Venza would come in only hybrid form using the same 2.5-liter setup with rear electric motor that the Highlander uses. 
      If the rumors prove true, you could see a new Venza hit the auto show circuit as early as 2021. 

      View full article
    • By Drew Dowdell
      According to the Rumorpile, Toyota is working on bringing back the Venza, a car that went out of production after 2015. The original Venza did not sell very well, partially due to its wagon-like shape and also relatively high pricing.  It also lacked any off-road pretense that typically comes with a crossover.
      The problem for Toyota is that there is a large Venza sized gap in their SUV lineup between the RAV-4 and Highlander. This time around, the Venza would ditch the wagon looks and instead be a true crossover along the lines of the Chevrolet Trailblazer, Honda Passport, and Ford Edge. There is a possibility that the Venza would come in only hybrid form using the same 2.5-liter setup with rear electric motor that the Highlander uses. 
      If the rumors prove true, you could see a new Venza hit the auto show circuit as early as 2021. 
    • By Drew Dowdell
      Rumor has it that Ford is working on a V8 powered version of their Ranger Raptor currently sold in overseas markets. Only available in other parts of the world, the current Ranger Raptor is powered by a 2.0-liter 4-cylinder diesel that produces 210 horsepower and 369 lb.-ft of torque, but a report in Wheels magazine says that Ford Australia is working with an external engineering company to swap the 2.0 diesel for a 5.0-liter V8 from the Mustang GT.  The odd thing about this is that the Ranger Raptor 5.0 would be still built with the 2.0-liter diesel under the hood and then later converted to V8 gasoline power.
      Expect power to be about the same as it makes in the Australian spec Mustang GT, a healthy 455 horsepower and 410 lb.-ft of torque. 
      If it all comes together, the Ranger Raptor 5.0 is expected to go on sale in Australia next year, sold by Ford dealers and backed by the full 5-year warranty. For now, the Ranger Raptor remains forbidden fruit to the U.S. no matter what engine is under the hood.

      View full article
    • By Drew Dowdell
      Rumor has it that Ford is working on a V8 powered version of their Ranger Raptor currently sold in overseas markets. Only available in other parts of the world, the current Ranger Raptor is powered by a 2.0-liter 4-cylinder diesel that produces 210 horsepower and 369 lb.-ft of torque, but a report in Wheels magazine says that Ford Australia is working with an external engineering company to swap the 2.0 diesel for a 5.0-liter V8 from the Mustang GT.  The odd thing about this is that the Ranger Raptor 5.0 would be still built with the 2.0-liter diesel under the hood and then later converted to V8 gasoline power.
      Expect power to be about the same as it makes in the Australian spec Mustang GT, a healthy 455 horsepower and 410 lb.-ft of torque. 
      If it all comes together, the Ranger Raptor 5.0 is expected to go on sale in Australia next year, sold by Ford dealers and backed by the full 5-year warranty. For now, the Ranger Raptor remains forbidden fruit to the U.S. no matter what engine is under the hood.
    • By Drew Dowdell
      Jeep is said to be working on a tiny crossover that will slot below the Renegade in size and will likely launch in 2022. The estimated size would be around 4-meters in length which puts it slightly shorter than a Nissan Juke. The primary competitive target is the Suzuki Jimny, a model not sold in the United States, but a segment important to Jeep globally. 
      Jeep says that the new model would offer day-to-day practicality but still have the off-road prowess that people expect from a Jeep. As FCA is in a big push to electrify its vehicles these days, some form of electrification is likely with even a fully electric model possible. Though not offered in the U.S., FCA does build PHEV versions of the Jeep Renegade and Jeep Compass for the European market. 
      With FCA's merger with PSA looming, the possibility of using one of Peugeot-Citroen's platforms as a base for the new model emerges. Could we potentially see a Jeep on the Opel Corsa platform?  Time will tell. 

      View full article
  • Recent Status Updates

  • Reader Rides

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×
×
  • Create New...