Jump to content
  • William Maley
    William Maley

    Rumorpile: Buick Working On An All-Electric Crossover Based On Bolt EV

    Sign in to follow this  

      Buick could be getting a new EV using the bones from the Chevrolet Bolt

    General Motors CEO Mary Barra said something interesting about the Chevrolet Bolt EV earlier this year.

    “…the Bolt is our platform that we’re going to continue on and have a huge range of vehicles.”

    Now, a new report from InsideEVs has possible details on one of these new models. According to a source that attended a focus group in California, the vehicle in question is a new Buick crossover that is said to look like a next-generation Encore. The model will use the Bolt's structure and powertrain, but come with a different design and features such as a floating roof and a push-button drive selector. 

    The Buick crossover will be about the same size as the Bolt, but offer slightly more rear legroom. It will also be slightly slower than the Bolt - a 0.4-second difference in 0-60 mph time.Bolt, but offer slightly more rear legroom. 

    No timeframe was given as to when we might see this new Buick EV crossover.

    Source: InsideEVs

     

    Sign in to follow this  


    User Feedback

    Recommended Comments

    Be interesting to see what they do with the BOLT Bones. This could be what the wife will approve to buy then. :)

    • Upvote 1

    Share this comment


    Link to comment
    Share on other sites

    This is a good idea and if it is larger than the Bolt, say 173 inches long it will be in the middle of the Encore and Envision in size.  Pricing I imagine would mirror the Enclave.

    • Like 1

    Share this comment


    Link to comment
    Share on other sites
    4 hours ago, smk4565 said:

    This is a good idea and if it is larger than the Bolt, say 173 inches long it will be in the middle of the Encore and Envision in size.  Pricing I imagine would mirror the Enclave.

    Might be a really nice vehicle, actually.

    • Like 1

    Share this comment


    Link to comment
    Share on other sites

    OK now this makes sense.  Expanding the Bolt to a Buick crossover is a great idea.  Just make sure it is Envision sized rather than Encore sized. 

    Share this comment


    Link to comment
    Share on other sites


    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.




  • Similar Content

    • By William Maley
      This week, Hagerty obtained a document from General Motors' executive director in charge of program management, Michelle Braun that says development on future car and truck programs has been paused due to the COVID-19 outbreak. But the document also mentions some intriguing information on upcoming powertrains for the C8 Corvette. Here are the details,
      Corvette Z06: 5.5L DOHC V8 known as the LT6 that will produce 650 horsepower and 600 pound-feet of torque. No mention of any type of forced-induction. Corvette Gran Sport: 6.2L OHC V8 with a hybrid system that's expected to produce 600 horsepower and 500 pound-feet of torque. Corvette ZR1: Twin-Turbo 5.5L DOHC V8, dubbed LT7. Output is expected to be 850 horsepower and 800 pound-feet. Corvette Zora: The powerhouse of the C8, it will take the Twin-Turbo LT7 and augment with a hybrid system. This is expected to produce 1,000 horsepower and 975 pound-feet of torque. Hagerty's report says the rollout of the new engines will begin in 2022 with the LT6, but the COVID-19 outbreak may push the plans back.
      Source: Hagerty

      View full article
    • By William Maley
      This week, Hagerty obtained a document from General Motors' executive director in charge of program management, Michelle Braun that says development on future car and truck programs has been paused due to the COVID-19 outbreak. But the document also mentions some intriguing information on upcoming powertrains for the C8 Corvette. Here are the details,
      Corvette Z06: 5.5L DOHC V8 known as the LT6 that will produce 650 horsepower and 600 pound-feet of torque. No mention of any type of forced-induction. Corvette Gran Sport: 6.2L OHC V8 with a hybrid system that's expected to produce 600 horsepower and 500 pound-feet of torque. Corvette ZR1: Twin-Turbo 5.5L DOHC V8, dubbed LT7. Output is expected to be 850 horsepower and 800 pound-feet. Corvette Zora: The powerhouse of the C8, it will take the Twin-Turbo LT7 and augment with a hybrid system. This is expected to produce 1,000 horsepower and 975 pound-feet of torque. Hagerty's report says the rollout of the new engines will begin in 2022 with the LT6, but the COVID-19 outbreak may push the plans back.
      Source: Hagerty
    • By dfelt
      NEURON EV

      CES 2020 has been a busy place this year with more auto companies showing of prototypes and finally production ready auto's than ever before. We have seen so much including the latest in super dense solid state batteries for the EVs to motorcycles and bikes.
      This year we now get to see the latest competition to Tesla and Rivian in a well funded California / China based EV auto company called NEURON EV. This company has a swiss army knife of a truck/suv auto as well as a Semi truck that they say is going into production in 2020.

      The truck which is seen here in Silver has a sister truck that was running around the streets which is the following Black T-One.

      All the details you could ever want can be found here on this truck: https://www.neuronev.co/new-products/t-one-p-gyrwr
      The cool thing about this modular truck is that is can be more than a truck, a tractor, a van. there are no limits to how one can configure up this beast of an EV.

      The seat options are an interesting take as you can go like how Tesla showed their Semi with a center driving position as a base 3 seat configuration of 3 captain chairs, or a single drivers captain chair and a bench seat behind for 4 people and go from there to cover a wide range of colors, materials, etc. in customizing your auto. 
      While this company is looking at this modular truck and semi for the US, in china they will have many more auto options including their V.E.G.A. or Versatile Electric Grand Automobile.

      The company has great plans and while they have only two models for the US market, China will get many more that includes a medium duty truck, a bus, a MAP or Multipurpose Autonomous Platform focused on shipping yards, a HUB or autonomous transportation auto, in addition to the car, semi and truck.
      NEURON EV has not released any details about their hp / torque other than to say class leading at this time. Two wheel drive and All Wheel Drive will be the choices folks will have and talk of a base 300 mile range battery pack. More details are to come later this year.
      First Press release of 2020 can be found here:
      https://www.neuronev.co/01102020
      https://www.youtube.com/channel/UC69MUFfq-4W8qxUWcGltBUg
       
  • Posts

  • Social Stream

  • Today's Birthdays

    1. Ted Smith
      Ted Smith
      (40 years old)
    2. Tommy231
      Tommy231
      (61 years old)
  • Who's Online (See full list)

    There are no registered users currently online

  • My Clubs

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×
×
  • Create New...