Jump to content
  • William Maley
    William Maley

    Rumorpile: Toledo Plant To Be Home To New Ram Midsize Truck

      Wrangler pickup and a new midsize Ram truck, built at the same assembly plant

    In the most recent five-year plan for Fiat Chrysler Automobiles, Ram Trucks revealed that it planned to have a new midsize truck by 2022. Thanks to a new report from Automotive News, we have some tantalizing details.

    According to supplier sources, the new Ram truck will be built at FCA's Toledo, Ohio plant - home to the Wrangler and upcoming Wrangler pickup. Half of the plant has been shutdown since April for retooling to make way for the Wrangler pickup. The line regularly built more than 230,000 JK Wranglers per year before undergoing the retooling process. FCA is not expecting the Wrangler truck to sell in high numbers, leaving a fair amount of capacity ready for another vehicle. Hence where the Ram midsize comes in.

    This also reveals that the midsize truck will be body-on frame. We've heard previously that Ram was considering unibody construction.

    The truck is expected to debut in 2020 as a 2021 model.

    Source: Automotive News (Subscription Required)

    • Like 1


    User Feedback

    Recommended Comments



    Should be exciting since it will be built side by side with the Jeep pickup truck. That should mean we get some serious off road capabilities hopefully without the current side airbag problems the ZR2 is having.

    Share this comment


    Link to comment
    Share on other sites

    Wonder what they will call it...wonder what the platform is...the Wrangler pickup chassis with a Ram body and interior, or something else...

    Share this comment


    Link to comment
    Share on other sites

    I don't understand why the Jeep truck and this are taking so long. I'd think they should have been out when the Ranger comes out. 2022? That just feels like an absurd amount of time. 

    Edited by ccap41
    • Thanks 1
    • Upvote 1

    Share this comment


    Link to comment
    Share on other sites

    I think FCA is just undercapitalized and understaffed so everything takes forever to get going...the Ranger was easy, since it was an existing product that they brought in to NA. 

    • Like 1

    Share this comment


    Link to comment
    Share on other sites
    10 minutes ago, Cubical-aka-Moltar said:

    I think FCA is just undercapitalized and understaffed so everything takes forever to get going...the Ranger was easy, since it was an existing product that they brought in to NA. 

    Isn't there a small Ram/Dodge/Fiat outside of the US also though? 

    Share this comment


    Link to comment
    Share on other sites
    2 minutes ago, ccap41 said:

    Isn't there a small Ram/Dodge/Fiat outside of the US also though? 

    Yes, in Mexico, but IIRC it's based on old FWD Fiat car platform...doubt if it could be federalized or if it would sell well enough here...I saw a few of them in AZ and So Cal. 

    Ram 700

    https://jalopnik.com/the-tiny-ram-700-pickup-truck-can-carry-more-than-half-1652291667

    2012-fiat-strada-adventure.jpg

    Edited by Cubical-aka-Moltar
    • Haha 1

    Share this comment


    Link to comment
    Share on other sites
    8 minutes ago, ccap41 said:

    Fiat also has a truck. Fiat Fullback.

     

    Fiat Fullback.jpg

    Yes, a rebadged version of the Mitsubishi Triton/L200. I believe this new Ram truck will replace the Fullback.

    --« Max Earey 094.jpg

    • Thanks 1

    Share this comment


    Link to comment
    Share on other sites

    Ah yeah, the Fullback...I remember reading about that..it and the Mitsu compete w/ the Ranger, Hilux, Navara, Anorak, etc in Europe and Asia.... could give it a squared off Ram nose and badge it as the Ram 50.. ala 1980.

    Edited by Cubical-aka-Moltar
    • Like 1

    Share this comment


    Link to comment
    Share on other sites
    1 minute ago, Cubical-aka-Moltar said:

    Ah yeah, the Fullback...I remember reading about that..it and the Mitsu compete w/ the Ranger, Hilux, Navara, Anorak, etc in Europe and Asia.... could give it a squared off Ram nose and badge it as the Ram 50.. ala 1980.

    If Wikipedia is accurate it is only sold in the middle east. 🤷‍♂️

    Share this comment


    Link to comment
    Share on other sites
    34 minutes ago, ccap41 said:

    If Wikipedia is accurate it is only sold in the middle east. 🤷‍♂️

    The Mitsu version is sold all over, though..

    Share this comment


    Link to comment
    Share on other sites
    39 minutes ago, Cubical-aka-Moltar said:

    The Mitsu version is sold all over, though..

    Ahhh that makes sense. Thanks! 

    Share this comment


    Link to comment
    Share on other sites
    5 hours ago, balthazar said:

    ^ With all that cladding- would make a fitting subaru truck.

    You are such a BRAT

    Wow, I agree with ccap... WAY too long to wait!  I would take one RIGHT NOW with the 3.6 Pentastar or a diesel!

    • Like 1

    Share this comment


    Link to comment
    Share on other sites

    Too bad FCA did not bother putting a midsize pickup truck a few years earlier.  Not sure it will succeed given how well the Colorado/Canyon are selling these days. . . . and the new Ranger.

    Share this comment


    Link to comment
    Share on other sites

    Yes, and do a Ram Dakota Rebel trimmed like the Ram Rebel.  And maybe for a top version something exotic sounding like the Dakota Minot.

    Share this comment


    Link to comment
    Share on other sites
    35 minutes ago, Drew Dowdell said:

    and for the sports model... Ram Dakota Rushmore.  Not quite an SRT or hellcat but still speedy. 

    and then on top of that, a Hellcat version....Ram Dakota Defecateur (French spelling would be badass). ;)  (J/K, having a really shitty work day...production support hell). 

    Edited by Cubical-aka-Moltar

    Share this comment


    Link to comment
    Share on other sites

    What engines would they be using in a mid-size truck? Obviously the 3.6 Pentastar if it ws produced today but do you think it would base with the 2.0T that's in the Wrangler? 

    Share this comment


    Link to comment
    Share on other sites
    18 minutes ago, ccap41 said:

    Would the 3.6 be due to be replaced by 2022? What was its last major update? 

    Who knows?  I think it got the auto stop/start around 15-16. 

    Share this comment


    Link to comment
    Share on other sites



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.




  • Similar Content

    • By William Maley
      This week, Hagerty obtained a document from General Motors' executive director in charge of program management, Michelle Braun that says development on future car and truck programs has been paused due to the COVID-19 outbreak. But the document also mentions some intriguing information on upcoming powertrains for the C8 Corvette. Here are the details,
      Corvette Z06: 5.5L DOHC V8 known as the LT6 that will produce 650 horsepower and 600 pound-feet of torque. No mention of any type of forced-induction. Corvette Gran Sport: 6.2L OHC V8 with a hybrid system that's expected to produce 600 horsepower and 500 pound-feet of torque. Corvette ZR1: Twin-Turbo 5.5L DOHC V8, dubbed LT7. Output is expected to be 850 horsepower and 800 pound-feet. Corvette Zora: The powerhouse of the C8, it will take the Twin-Turbo LT7 and augment with a hybrid system. This is expected to produce 1,000 horsepower and 975 pound-feet of torque. Hagerty's report says the rollout of the new engines will begin in 2022 with the LT6, but the COVID-19 outbreak may push the plans back.
      Source: Hagerty

      View full article
    • By William Maley
      This week, Hagerty obtained a document from General Motors' executive director in charge of program management, Michelle Braun that says development on future car and truck programs has been paused due to the COVID-19 outbreak. But the document also mentions some intriguing information on upcoming powertrains for the C8 Corvette. Here are the details,
      Corvette Z06: 5.5L DOHC V8 known as the LT6 that will produce 650 horsepower and 600 pound-feet of torque. No mention of any type of forced-induction. Corvette Gran Sport: 6.2L OHC V8 with a hybrid system that's expected to produce 600 horsepower and 500 pound-feet of torque. Corvette ZR1: Twin-Turbo 5.5L DOHC V8, dubbed LT7. Output is expected to be 850 horsepower and 800 pound-feet. Corvette Zora: The powerhouse of the C8, it will take the Twin-Turbo LT7 and augment with a hybrid system. This is expected to produce 1,000 horsepower and 975 pound-feet of torque. Hagerty's report says the rollout of the new engines will begin in 2022 with the LT6, but the COVID-19 outbreak may push the plans back.
      Source: Hagerty
    • By Drew Dowdell
      According to the Rumorpile, Toyota is working on bringing back the Venza, a car that went out of production after 2015. The original Venza did not sell very well, partially due to its wagon-like shape and also relatively high pricing.  It also lacked any off-road pretense that typically comes with a crossover.
      The problem for Toyota is that there is a large Venza sized gap in their SUV lineup between the RAV-4 and Highlander. This time around, the Venza would ditch the wagon looks and instead be a true crossover along the lines of the Chevrolet Trailblazer, Honda Passport, and Ford Edge. There is a possibility that the Venza would come in only hybrid form using the same 2.5-liter setup with rear electric motor that the Highlander uses. 
      If the rumors prove true, you could see a new Venza hit the auto show circuit as early as 2021. 

      View full article
  • Posts

    • ^^^  I did not know that.  About the Renault 8 being built in Saint Bruno.  I mean, I knew Renault had a plant here, its just that I thought it was the Renault 5 "Le Car" being built here.   There were a few of these "Le Cars" around back in the day that I assumed when I learned in my teens that Renault had a plant here  that 'twas it that was manufactured here.  I never saw and got the chance to see the Renault 8 on Montreal roads.  I never knew this car even existed as even in Greece, I dont remember ever seeing this car.  And yeah, it makes sense that  Montreal bought these because it was built locally.  Logical.  
    • Used them because they were built locally? Saint Bruno, Quebec http://www.oldcarscanada.com/2011/08/1966-renault-8.html
    • Im trying to match Balthy's old time pics. But mine will always be within a Montreal realm.  There was a short time when Montreal had little shytty Renaults as cop cars.  I believe this to be a Renault 8.  From the '60s I assume.  Dont really know why on earth Montreal decided to have a fleet of these. I think it was a Youth Squad for rookies to learn how to do a "beat"  And a row of these shytty Renaults.
    • More power and torque than an e28 M5.😮    530i 3.9 p1     530i 3.9 p2     530i 3.9 p3    530i 3.9 p4
  • Social Stream

  • Today's Birthdays

    1. ForzaJersey
      ForzaJersey
      (30 years old)
    2. Oracle of Delphi
      Oracle of Delphi
      (51 years old)
  • Who's Online (See full list)

  • My Clubs

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×
×
  • Create New...