Jump to content
  • Drew Dowdell
    Drew Dowdell

    GM Truck Diesel Power Figures Released

      ...promises a new level of diesel refinement...


    GM released power figures today for the new inline 6-cylinder diesel engine that will be available in the Chevrolet Silverado and GMC Sierra.  Available at the same price as the 6.2 liter model, GM promises the new engine will change perceptions about diesel performance and refinement.  GM recently announced the delay of the 3.0-liter diesel until the 2020 model year due to emissions certification delays. 

    Paired with a 10-speed automatic transmission, the diesel produces an SAE-certified 277 horsepower and 460 lb-ft of torque with 95 percent of that torque being available at just 1,250 RPM.  Torque peak comes at 1500 rpm and peak horsepower at 3750 rpm.

    The powertrain is setup to offer diesel exhaust braking to help slow the vehicle when the truck is in tow-haul mode, limiting the number of applications of the brakes to save on brake wear. The engine also has a user selective start-stop function to save additional fuel in city driving. 

    2019 CHEVROLET SILVERADO 3.0L DURAMAX TURBO-DIESEL SPECIFICATIONS

    Type:

    Duramax 3.0L DOHC Turbo Diesel I6 

    Bore & Stroke (in. / mm):

    3.30 x 3.54 inches (84mm x 90mm)

    Block Material:

    Aluminum

    Cylinder Head Material:

    Aluminum

    Compression Ratio:

    15.0: 1

    Firing Order:

    1-5-3-6-2-4

    Valvetrain:

    Dual-overhead camshafts, four-valves per cylinder

    Air Delivery:

    Single variable-geometry turbocharger; intercooling system. 42.8-psi / 2.95 bar max boost

    Fuel Delivery:

    High-pressure, common-rail direct injection (36,250 psi / 2500 bar); electronic throttle valve

    Ignition System:

    Compression

    Max Engine Speed:

    5100 rpm

    Additional Features:

    Continuously variable oil pump; engine oil cooler, automatic stop/start, Active Thermal Management,

    Emissions Control:

    Low-pressure Exhaust Gas Recirculation (EGR); Selective Catalyst Reduction on Filter (SCRF)

    Horsepower
    (hp / kW @ rpm):

    277 / 204 @ 3750 (SAE certified)

    Torque
    (lb.-ft. / Nm @ rpm):

    460 / 624 @ 1500 (SAE certified)

    Manufacturing Location (of globally sourced parts)

    Flint, Mich.  

     

     

    Chevy Press release on page 2


    2020 CHEVROLET SILVERADO’S NEW, ADVANCED 3.0L DURAMAX TURBO-DIESEL REDEFINES EXPECTATIONS

    No-compromise engine delivers refinement, performance and efficiency

    2019-06-03

    DETROIT — The all-new 2020 Chevrolet Silverado’s available 3.0L Duramax inline-six turbo-diesel engine adds choice and versatility for full-size truck customers, offering class-leading torque and horsepower in addition to focusing on fuel economy and capability. It is the first-ever inline-six turbo-diesel offered in Chevrolet’s full-size light-duty trucks.

    Chevrolet engineers started with a clean-sheet design and developed an all-new engine that leverages the efficiency and refinement advantages of the inline six-cylinder architecture and incorporates advanced combustion and emissions technologies to optimize performance and efficiency. It is priced identically to the 6.2L V-8 as a $2,495 premium over a 5.3L V-8 model or $3,890 over a 2.7L Turbo model.

    “From the moment the engine is started, to its idle, acceleration and highway cruising, the 3.0L Duramax performance will change perceptions of what a diesel engine can offer in refinement,” said Nicola Menarini, director for Diesel Truck Engine Program Execution. “With advanced technologies that draw on global diesel expertise, it’s a no-compromise choice for those who want the capability and driving range of a diesel in a light-duty truck.”

    Available on LT, RST, LTZ and High Country models, the 3.0L Duramax diesel rounds out the new Silverado’s range of six propulsion choices, each tailored to suit customers’ needs for performance, efficiency, technology and value. It is rated at an SAE-certified 277 horsepower and 460 lb-ft of torque delivering 95 percent of peak torque at just 1,250 rpm. Peak torque is sustained from 1,500 rpm through 3,000 rpm, providing a powerfully smooth and satisfying driving experience.

    The 3.0L Duramax is paired with GM’s 10L80 10-speed automatic transmission, featuring a centrifugal pendulum absorber torque converter that reduces vibrations to improve smoothness, reinforcing its performance, efficiency and refinement. This combination also offers exhaust braking, which uses the diesel engine’s compression to help slow the vehicle, requiring fewer brake applications by the driver when in Tow Haul mode.

    Innovative Engine Technologies

    The inline six-cylinder architecture offers inherent efficiency and refinement, but the team expanded with smart technology choices to help improve efficiency and weight while optimizing the truck experience. A lightweight aluminum block and cylinder head reduce overall mass, and Active Thermal Management enhances efficiency and cold-weather warm-up. Ceramic glow plugs also help with shorter heat-up times and a quicker cold start, meaning the engine block heater is not needed until -22 degrees F.

    Towing is an important part of owning a truck, and customers can gain additional confidence thanks to the exhaust brake available in tow-haul mode. The water charge air cooler, coupled with low pressure EGR, reduces time to torque. The variable geometry turbocharger helps provide a greater balance of performance and efficiency, and an electronically variable intake manifold helps optimize performance across the rpm band.

    Inherently efficient and balanced

    Compared to a DOHC V-6, the inline-six architecture offers greater efficiency from the reduced friction of operating only two camshafts and their associated valvetrain components. The I6 configuration offers the perfect balance of primary and secondary forces, without the need for balancing shafts.

    “In addition to reduced friction, the architecture enables smooth operation,” Menarini said. “The new Duramax 3.0L elevates the 2019 Silverado with one of the most refined and efficient diesel engines in the segment.”

    Along with supporting elements such as a tuned air induction system and other noise-attenuating elements, the 3.0L Duramax delivers exceptional quietness and smoothness at all engine speeds.

    All-aluminum construction and tough rotating assembly

    The 3.0L Duramax cylinder block is made of a cast aluminum alloy that provides the strength required to support the high combustion pressures that occur within a diesel engine, while also offering an approximately 25 percent mass savings over a comparable cast iron engine block. Iron cylinder liners are used within the aluminum block to insure truck durability.

    There are seven nodular iron main bearing caps that help ensure the block’s strength under those high combustion pressures, while also enabling accurate location of the rotating assembly. A deep-skirt block design, where the block casting extends below the crankshaft centerline, also contributes to the engine’s stiffness and refinement. It’s complemented by a stiffness-enhancing aluminum lower crankcase extension attached to the main bearing caps.

    The rotating assembly consists of a forged steel crankshaft, forged steel connecting rods and hypereutectic aluminum pistons. The alloys in the respective castings for the rods and pistons make them lightweight and durable. Silicon is blended with the aluminum for heat resistance and tolerance within the piston cylinders, which enhances performance and makes the engine quiet.

    A thick piston crown — the top of the piston — and reinforced top ring add strength to support the tremendous cylinder pressures enabled by turbocharging and the engine’s high 15.0:1 compression ratio.

    DOHC Cylinder Head and Rear Cam Drive

    Overhead camshafts offer a direct, efficient means of operating the valves, while four valves per cylinder activated by maintenance-free finger followers with hydraulic lash adjusters increase airflow in and out of the engine. This arrangement is integrated on the Duramax 3.0L’s lightweight aluminum cylinder head, which is topped with a lightweight composite cam cover that incorporates the crankcase ventilation and oil separation systems.

    A pair of lightweight, assembled camshafts actuates 28.35 mm diameter (1.12-inch) intake and 24.55 mm diameter (0.97-inch) exhaust valves. The camshaft drivetrain is uniquely located at the rear (flywheel side) of the engine, for greater refinement and packaging considerations for the comparatively long inline-six. A crankshaft-driven chain drives the high-pressure direct-injection fuel pump, while a chain driven by the fuel pump drives both intake and exhaust camshafts. A smaller belt drives the variable flow oil pump from the crankshaft.

    Additional Technology Highlights

    Variable geometry turbocharging enables the Duramax 3.0L engine to deliver class-leading horsepower with minimal effect on overall efficiency. The system uses closed loop controlled vanes position and sophisticated electronic controls to automatically adjust boost pressure to the desired value based on engine running conditions and instantaneous power demand. The liquid-cooled turbocharger features a low-friction ball-bearing shaft and is mounted close to the exhaust outlet of the engine for quicker spool-up of the turbine and quicker light-off of the exhaust catalyst. A water-to-air intercooling system produces a cooler higher density air charge for greater power. Maximum boost pressure is 43,5 psi (300 Kpa) absolute.

    Low-pressure EGR: The Duramax 3.0L utilizes new low-pressure Exhaust Gas Recirculation to optimize performance and efficiency. The EGR system diverts some of the engine-out exhaust gas and mixes it back into the fresh intake air stream, which is drawn into the cylinder head for combustion. That lowers combustion temperatures and rates.

    Traditionally, EGR systems in diesel applications recirculate exhaust gases between the two high-pressure points, the exhaust manifold(s) and intake manifold. However, it generally requires efficiency-robbing assistance from the turbocharger or other supporting elements to achieve the pressure differential required for sufficient EGR flow rates.

    The new low-pressure system adds to the high-pressure system, supporting continual adjustment of exhaust backpressure for more efficient operation. It recirculates gases between the low-pressure points in the exhaust system (downstream of the particulate filter) and after the compressor inlet.

    When the low-pressure EGR is activated by an electronically controlled valve, the engine burns exhaust gas that has already passed through the particulate filter. That increases the turbocharger’s efficiency, which helps overall vehicle efficiency without deteriorating the rate of particulate matter emitted by the engine.

    A variable intake manifold offers dual air intake pathways for each cylinder. Electronically controlled flaps — one for each cylinder — shorten or lengthen the airflow to each cylinder. This optimizes the airflow into the engine and improves performance and responsiveness across the rpm band, particularly at lower engine speeds.

    A variable-pressure oiling system with a continuously variable-displacement vane oil pump enhances efficiency by optimizing oil pressure as a function of engine speed and load. With it, the oil supply is matched to the engine requirements rather than the excessive supply of a conventional, fixed-displacement oil pump. The engine uses low-friction Diesel Dexos 0W20 oil.

    Oil jets located in the block are employed for performance and temperature control. They target the inner core of the piston with an extra layer of cooling, friction-reducing oil. The jets reduce piston temperature, allowing the engine to produce more power and enhance long-term durability than engines without the technology.

    Active Thermal Management helps the engine warm up quickly to achieve and maintain its optimal engine temperature for performance and efficiency over the entire engine operating range. The system uses a three-actuator rotary valve system to distribute coolant through the engine in a targeted manner. It sends heat where it’s needed to warm up the engine to reduce friction and heat the passenger cabin or cools when needed for high-power operation. The Duramax 3.0L also features split cooling between the block and head.

    Common rail direct fuel injection of 2,500 bar (36,250 psi) helps generates class-leading horsepower and torque. The system’s pressure is generated by an engine-driven twin-piston pump sending fuel to solenoid-activated injectors with nine-hole nozzles that support precise metering of the fuel for a smooth idle and lower combustion noise. The fuel system is capable of multiple injections per combustion cycle — up to 10 times per injector — for more consistent and stable combustion performance that translates into smoothness and refinement, particularly at idle.   

    Electronic throttle valve: The Duramax 3.0L features an electronic throttle valve to regulate intake manifold pressure in order to optimize exhaust gas recirculation rates. It also contributes to a smooth engine shutdown via a more controlled method of airflow reduction.

    Ceramic glow plugs used in the Duramax 3.0L heat up more quickly and hotter than conventional metal-based glow plugs, helping the engine start and heat up more quickly in cold weather. The Duramax 3.0L achieves unassisted and assisted starting temperatures of -22 F (-30 C) and -40 F (-40 C) respectively.

    Stop/start technology helps optimize efficiency in city driving. The driver-selectable system shuts off the engine at stoplights and other stop-and-go situations. The engine automatically restarts when the driver takes their foot off the brake.

    ABOUT CHEVROLET

    Founded in 1911 in Detroit, Chevrolet is one of the world's largest car brands, doing business in more than 100 countries and selling more than 4.0 million cars and trucks a year. Chevrolet provides customers with fuel-efficient vehicles that feature engaging performance, design that makes the heart beat, passive and active safety features and easy-to-use technology, all at a value. More information on Chevrolet models can be found at www.chevrolet.com.

    # # #

    2019 CHEVROLET SILVERADO 3.0L DURAMAX TURBO-DIESEL SPECIFICATIONS

    Type:

    Duramax 3.0L DOHC Turbo Diesel I6 

    Bore & Stroke (in. / mm):

    3.30 x 3.54 inches (84mm x 90mm)

    Block Material:

    Aluminum

    Cylinder Head Material:

    Aluminum

    Compression Ratio:

    15.0: 1

    Firing Order:

    1-5-3-6-2-4

    Valvetrain:

    Dual-overhead camshafts, four-valves per cylinder

    Air Delivery:

    Single variable-geometry turbocharger; intercooling system. 42.8-psi / 2.95 bar max boost

    Fuel Delivery:

    High-pressure, common-rail direct injection (36,250 psi / 2500 bar); electronic throttle valve

    Ignition System:

    Compression

    Max Engine Speed:

    5100 rpm

    Additional Features:

    Continuously variable oil pump; engine oil cooler, automatic stop/start, Active Thermal Management,

    Emissions Control:

    Low-pressure Exhaust Gas Recirculation (EGR); Selective Catalyst Reduction on Filter (SCRF)

    Horsepower
    (hp / kW @ rpm):

    277 / 204 @ 3750 (SAE certified)

    Torque
    (lb.-ft. / Nm @ rpm):

    460 / 624 @ 1500 (SAE certified)

     

    • Like 1


    User Feedback

    Recommended Comments

    Making the price of entry the same as the 6.2 and not thousands above it, like their competition, is going to make this A LOT more enticing than the competition's baby diesels. Good for them. 

    • Like 2

    Share this comment


    Link to comment
    Share on other sites

    For reference

    F-150 Powerstroke: 250 horsepower at 3,250 rpm and 440 lb.-ft. of torque at just 1,750 rpm

    Ram EcoDiesel: 240 horsepower and 440 lb-ft of torque

    So the GM engine looks to be the most powerful of the light-duty diesel engines

    • Like 1
    • Upvote 1

    Share this comment


    Link to comment
    Share on other sites

    That is some good low end torque and pricing the same as the V8 is a good idea so people actually buy, unlike the huge up charge that some diesel vehicles have.

    Share this comment


    Link to comment
    Share on other sites
    37 minutes ago, smk4565 said:

    That is some good low end torque and pricing the same as the V8 is a good idea so people actually buy, unlike the huge up charge that some diesel vehicles have.

    Great way to convince some truck drivers to ditch their F-series for a better diesel truck.

    Share this comment


    Link to comment
    Share on other sites
    18 minutes ago, riviera74 said:

    Great way to convince some truck drivers to ditch their F-series for a better diesel truck.

    Although Elon says the Tesla truck is a better sports car than a 911 and can tow 300,000 lbs and will cost $49,000.  Shot fired!

    Share this comment


    Link to comment
    Share on other sites

     A Maximum Engine Speed of 5,100 rpm is VERY HIGH for a diesel engine, particularly one which reaches its power peak at 3,750 rpm. That is higher than the 4,500~5,000 rpm range of most 2.0L turbodiesels (including the Opel/Cruze diesel and BMW diesel all of which reach their power peaks at about 4000 rpm or more). The transmission will probably shift shy of 4,000 rpm for optimal acceleration. The only explanation is that it is for engine brake burping.

    Still one wonders why they bothered with a new DOHC I6 design for this application. Simply taking HALF of the 6.6 Duramax V8 (L5P) will get you a 275 hp @ 3050 rpm / 525 lb-ft  @ 1975 rpm 3.3L 4-cylinder diesel engine built on components proven with a 18-year service record. More than stout enough for the application without the development costs, complexity and added parasitic of a DOHC valve train.

    Edited by dwightlooi
    • Upvote 1

    Share this comment


    Link to comment
    Share on other sites
    2 hours ago, smk4565 said:

    Although Elon says the Tesla truck is a better sports car than a 911 and can tow 300,000 lbs and will cost $49,000.  Shot fired!

    Was Elon holding a water bong when he said that?

    • Haha 1

    Share this comment


    Link to comment
    Share on other sites
    15 hours ago, surreal1272 said:

    Was Elon holding a water bong when he said that?

    No way. Combustible weed is not strong enough for that. He must be drinking distilled THC straight up.

    Share this comment


    Link to comment
    Share on other sites


    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.




  • Similar Content

    • By William Maley
      This week, Hagerty obtained a document from General Motors' executive director in charge of program management, Michelle Braun that says development on future car and truck programs has been paused due to the COVID-19 outbreak. But the document also mentions some intriguing information on upcoming powertrains for the C8 Corvette. Here are the details,
      Corvette Z06: 5.5L DOHC V8 known as the LT6 that will produce 650 horsepower and 600 pound-feet of torque. No mention of any type of forced-induction. Corvette Gran Sport: 6.2L OHC V8 with a hybrid system that's expected to produce 600 horsepower and 500 pound-feet of torque. Corvette ZR1: Twin-Turbo 5.5L DOHC V8, dubbed LT7. Output is expected to be 850 horsepower and 800 pound-feet. Corvette Zora: The powerhouse of the C8, it will take the Twin-Turbo LT7 and augment with a hybrid system. This is expected to produce 1,000 horsepower and 975 pound-feet of torque. Hagerty's report says the rollout of the new engines will begin in 2022 with the LT6, but the COVID-19 outbreak may push the plans back.
      Source: Hagerty

      View full article
    • By William Maley
      This week, Hagerty obtained a document from General Motors' executive director in charge of program management, Michelle Braun that says development on future car and truck programs has been paused due to the COVID-19 outbreak. But the document also mentions some intriguing information on upcoming powertrains for the C8 Corvette. Here are the details,
      Corvette Z06: 5.5L DOHC V8 known as the LT6 that will produce 650 horsepower and 600 pound-feet of torque. No mention of any type of forced-induction. Corvette Gran Sport: 6.2L OHC V8 with a hybrid system that's expected to produce 600 horsepower and 500 pound-feet of torque. Corvette ZR1: Twin-Turbo 5.5L DOHC V8, dubbed LT7. Output is expected to be 850 horsepower and 800 pound-feet. Corvette Zora: The powerhouse of the C8, it will take the Twin-Turbo LT7 and augment with a hybrid system. This is expected to produce 1,000 horsepower and 975 pound-feet of torque. Hagerty's report says the rollout of the new engines will begin in 2022 with the LT6, but the COVID-19 outbreak may push the plans back.
      Source: Hagerty
    • By William Maley
      The rumors that have been swirling around for the past year have been laid to rest this morning. General Motors announced that Hummer will be returning as GMC-branded electric pickup truck boasting 1,000 horsepower and 11,500 lb-ft of torque. 0-60 mph will take three seconds. Those hoping for details about battery capacity, charging, and price will need to keep waiting until May 20th when GMC will officially show off the truck. Before then, GMC will preview the truck in a thirty second ad during the Super Bowl on Sunday.
      “GMC builds premium and capable trucks and SUVs and the GMC HUMMER EV takes this to new heights. We are excited to debut our revolutionary zero-emissions truck during the biggest night in TV advertising," said Duncan Aldred, vice president of Global Buick and GMC in a statement.
      Production will take place at GM's Detroit-Hamtramck plant, with sales beginning next fall.
      Source: GMC
      GMC HUMMER EV Pairs Incredible Capability, Zero Emissions
      “Quiet Revolution” campaign telegraphs GMC’s future with its first all-electric truck DETROIT – GMC will introduce the GMC HUMMER EV, bringing bold design and remarkable capability to the electrified vehicle space, during this weekend’s big game, in an ad titled “Quiet Revolution.”
      The spot juxtaposes the staggering anticipated performance metrics of GMC’s first all-electric truck with the remarkable quietness inherent in the operation of an electric vehicle.
      The GMC HUMMER EV truck will showcase the GMC brand’s design and engineering potential, and will feature:
      1,000 horsepower 11,500 lb-ft of torque 0 to 60 mph in 3 seconds “GMC builds premium and capable trucks and SUVs and the GMC HUMMER EV takes this to new heights,” said Duncan Aldred, vice president of Global Buick and GMC. “We are excited to debut our revolutionary zero-emissions truck during the biggest night in TV advertising.”
      The GMC HUMMER EV will be revealed on May 20, 2020 and built in Michigan at General Motors’ Detroit-Hamtramck assembly plant.
      The 30-second TV spot is scheduled to air during the second quarter of the big game. The spot highlights the anticipated performance of GMC’s all-electric super truck, which will generate remarkable metrics in terms of horsepower, torque and acceleration while providing incredible on- and off-road capability. All of this is combined with the vastly reduced noise and zero emissions inherent in the operation of an electric vehicle.
      As part of the digital and social media marketing push surrounding the big game ad, GMC will take over the YouTube homepage masthead on Friday, Jan. 31. Customers can follow the conversation at #GMCHummerEV.

      View full article
    • By William Maley
      The rumors that have been swirling around for the past year have been laid to rest this morning. General Motors announced that Hummer will be returning as GMC-branded electric pickup truck boasting 1,000 horsepower and 11,500 lb-ft of torque. 0-60 mph will take three seconds. Those hoping for details about battery capacity, charging, and price will need to keep waiting until May 20th when GMC will officially show off the truck. Before then, GMC will preview the truck in a thirty second ad during the Super Bowl on Sunday.
      “GMC builds premium and capable trucks and SUVs and the GMC HUMMER EV takes this to new heights. We are excited to debut our revolutionary zero-emissions truck during the biggest night in TV advertising," said Duncan Aldred, vice president of Global Buick and GMC in a statement.
      Production will take place at GM's Detroit-Hamtramck plant, with sales beginning next fall.
      Source: GMC
      GMC HUMMER EV Pairs Incredible Capability, Zero Emissions
      “Quiet Revolution” campaign telegraphs GMC’s future with its first all-electric truck DETROIT – GMC will introduce the GMC HUMMER EV, bringing bold design and remarkable capability to the electrified vehicle space, during this weekend’s big game, in an ad titled “Quiet Revolution.”
      The spot juxtaposes the staggering anticipated performance metrics of GMC’s first all-electric truck with the remarkable quietness inherent in the operation of an electric vehicle.
      The GMC HUMMER EV truck will showcase the GMC brand’s design and engineering potential, and will feature:
      1,000 horsepower 11,500 lb-ft of torque 0 to 60 mph in 3 seconds “GMC builds premium and capable trucks and SUVs and the GMC HUMMER EV takes this to new heights,” said Duncan Aldred, vice president of Global Buick and GMC. “We are excited to debut our revolutionary zero-emissions truck during the biggest night in TV advertising.”
      The GMC HUMMER EV will be revealed on May 20, 2020 and built in Michigan at General Motors’ Detroit-Hamtramck assembly plant.
      The 30-second TV spot is scheduled to air during the second quarter of the big game. The spot highlights the anticipated performance of GMC’s all-electric super truck, which will generate remarkable metrics in terms of horsepower, torque and acceleration while providing incredible on- and off-road capability. All of this is combined with the vastly reduced noise and zero emissions inherent in the operation of an electric vehicle.
      As part of the digital and social media marketing push surrounding the big game ad, GMC will take over the YouTube homepage masthead on Friday, Jan. 31. Customers can follow the conversation at #GMCHummerEV.
  • Posts

    • For those wondering about the Ward's Auto article - https://www.wardsauto.com/vehicles/cadillac-lyriq-pricing-expected-under-75000  
    • Not to mention how long has Benz been “showing off” the delayed EQS lineup? Funny how that gets sidestepped by the resident Daimler fan. 
    • ‘glass domed hood, big n littles, tach up high: 
    • A lot of good facts here and with all the low 3 liter V6s and 4.3s in both V6 and V8 form, it's easy to get them confused and/or forget them. I had forgotten.  There was a 3.3 V6 in the downsized Malibu because, that same year, they put out a 3.2 V6 (196 c.i.) for equivalent Buick products, such as the Regal and the Century.  I knew someone who had this engine in a hand-me down in a 2-door Regal, and he said it was reliable, economical, but had no oomph. It was great that Chevy's downsized full-sizes kept the inline 6 because the engine bay had room for it.  I believe 231s were available in the BOP full-size base cars.  I think, in that era, I'd opt for the inline 6 over the 231. I don't know what the 4.4 V8 was based on, which was also found in Malibus and Monte Carlos. 4.3s by Chevrolet can be confusing, since they made them as V6s and V8s.  Both were excellent engines.  The 4.3 V6 (Vortec) was sliced off from a Chevy 350.  Who'd have thought that this engine was a slam dunk for 300,000 miles?  A few Astro van drivers have told me that their 4.3s would not give up the ghost.  I think that, in that era, the 4.3 V6 (~ 262 c.i.) with simple TBI was better than the 231 c.i. V6, even if the 231 had gone even firing.  And, yes, it showed up in the 1985 MY model year.  I had the opportunity to drive a RWD Monte Carlo (bucket seats and console!) coupe with that engine in the NYC area and the extra ~ 30 hp (if I recall) came in handy for short ramps and getting out of the gate after paying a bridge toll. The 4.3 V8 was a de-bored 5.0 (305 c.i.) V8.  It showed up for the 1994 MY in RWD form but only stuck around for a few years.  If in excellent condition, the purr that they make is music to the ears.  It also can go the distance ... just hope the Optispark ignition control doesn't give out, which can be costly.  For some reason, the smaller GM V8s have nice, quiet exhaust notes and I like quiet running cars. Also, in the late '70s, Chevy had some batches of 305s and 350s that had premature camshaft wear problems.  I knew a few people who had problems with them.  That definitely skewed me towards Olds designed V8s.  However, with all of that behind them, I would gladly drive a car powered by the L99 engine (4.3 Chevy V8) that the thread discusses.  
    • Great photo!  It's good fun to take random photos of random animals when they show up.  I was getting gas in Orlando FL on a humid night and a little green frog had made its home in one of the slots in the steel column holding up the canopy over the gas pump island.
  • Social Stream

  • Today's Birthdays

    1. haypops
      haypops
      (74 years old)
    2. jhonmartin
      jhonmartin
      (31 years old)
    3. Lance Truthhammer
      Lance Truthhammer
      (36 years old)
    4. Munson05
      Munson05
      (46 years old)
  • Who's Online (See full list)

  • My Clubs

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×
×
  • Create New...