Jump to content

Chevrolet News:Spying: Next-Generation Chevrolet Camaro Makes Its First Appearance


William Maley

Recommended Posts

Ford is readying the 2015 Mustang, while Dodge is getting the refreshed 2015 Challenger ready to be sent out to dealers. What does Chevrolet have in store for the Camaro? Well the first set of spy shots have come out and it appears there is a lot in store.

Underneath all of the heavy camouflage, we can tell that Chevrolet is going with a more aggressive look and a lowered roofline. The wheels appear to have been moved closer to either end, and the rear end has been trimmed a little. Other details to take note include the quad exhaust pipes, large hood vents, and a big spoiler. This leads to some speculation that we're looking at high-performance model such as the SS or ZL1.

Under the skin, the next-generation Camaro is expected to use the Alpha platform which should drop the curb weight by a fair margin. The engine lineup is expected to include a V6, V8s, and the turbocharged 2.0L from the Cadillac ATS.

Source: Autoblog

William Maley is a staff writer for Cheers & Gears. He can be reached at william.maley@cheersandgears.com or you can follow him on twitter at @realmudmonster.


View full article

Link to comment
Share on other sites

Looks leaner, which is good.  I love the current Camaro, but it is a little hefty.  Hard to be sure through the camo, but looks like it's still sporting a retro-style front end.

 

A couple hopes:

1)  Trunk volume doesn't decrease.  Seriously, it's already small enough as it is.

2)  Interior feel a bit less...confining.  The first time I sat in one at a dealer, I almost had a claustrophobic attack (drove an '87 Firebird for years, never had that problem).

3)  Give the taillight clusters some of their personality back.  I loved the pre-'14 rear end styling, but the '14s lamps look like they were lifted off a '90s Integra...just very bland, generic.

Link to comment
Share on other sites

It looks similar in shape and style from what can be seen, so I assume it will be an evolution of the current car.  It does appear to have even less head room or side window glass, that confined feeling interior may return.  It looks big to me, when you see it next to the Impala, it doesn't look that much smaller, and the Impala is a big car. 

Link to comment
Share on other sites

A couple people on Camaro5/6 are pointing out that the edges of the windshield, and maybe the side windows, are taped to make their surface areas appear smaller.  Those people are also saying that the front end of the new car is probably covered by a current generation nose and that the rear is extended with tacked on stuff, which is why the front looks unchanged and the car looks big in general. 

  • Upvote 1
Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Social Stream

  • Similar Content

    • By David
      Lots of interesting stuff happening as GM by divisions starts to release more info on their EV programs.
      First is a interesting video on their Ultium batteries. This clearly shows how versatile they can build the battery packs.
      https://plants.gm.com/media/us/en/gm/bcportal.html/currentVideoId/6157651202001/currentChannelId/Most Recent.gsaOff.html
      Multiple-cell-configurations-within-Ultium-modules.mp4

      They have released a video of a side profile of the new Chevrolet Bolt morphing into the Bolt EUV. I was able to download the video and as such, way more visual detail than on the posted web sites below are showing.
      https://media.chevrolet.com/media/us/en/chevrolet/home.html
      chevrolet-bolt-euv-teaser-1598391287.mp4
      https://www.caranddriver.com/news/a33799068/chevy-2022-bolt-bolt-euv-tease/
      https://www.autoblog.com/2020/08/26/2022-chevy-bolt-euv-teaser-video/
      https://www.carscoops.com/2020/08/chevrolet-teases-2022-bolt-euv-and-ev-confirms-super-cruise-for-electric-suv/
      https://insideevs.com/news/440899/chevrolet-bolt-euv-production-summer-2021/
       
      Have to say the upcoming update to the Chevrolet Bolt and the EUV is nice looking and should sell even better than the old Bolt. Truly a much more CUV look.
    • By William Maley
      The Hyundai Santa Cruz has been talked about off and on since its debut as a concept in 2015. But it seems the truck is finally coming to fruition as some new spy shots reveal.
      Compared to the concept which was an extended cab, Hyundai is using a crew cab layout. The bed is quite short, possibly around four to five feet being our guess. Up front, the Santa Cruz gets the same front end treatment as the refreshed 2021 Santa Fe - wider front grille and new headlight treatment.
      Following in the footsteps of the Honda Ridgeline, the Santa Fe will be based on a unibody platform. In this case, the Santa Fe. This likely means power will come from either the 2.4L four-cylinder with 185 horsepower and 178 pound-feet of torque or turbocharged 2.0L four-cylinder with 235 hp and 260 lb-ft. Our money is on the latter engine. 
      Expect more details to come out on the Santa Cruz before its launch next year.
      Source: Autoblog, Car and Driver

      View full article
    • By William Maley
      The Hyundai Santa Cruz has been talked about off and on since its debut as a concept in 2015. But it seems the truck is finally coming to fruition as some new spy shots reveal.
      Compared to the concept which was an extended cab, Hyundai is using a crew cab layout. The bed is quite short, possibly around four to five feet being our guess. Up front, the Santa Cruz gets the same front end treatment as the refreshed 2021 Santa Fe - wider front grille and new headlight treatment.
      Following in the footsteps of the Honda Ridgeline, the Santa Fe will be based on a unibody platform. In this case, the Santa Fe. This likely means power will come from either the 2.4L four-cylinder with 185 horsepower and 178 pound-feet of torque or turbocharged 2.0L four-cylinder with 235 hp and 260 lb-ft. Our money is on the latter engine. 
      Expect more details to come out on the Santa Cruz before its launch next year.
      Source: Autoblog, Car and Driver
    • By William Maley
      This week, Hagerty obtained a document from General Motors' executive director in charge of program management, Michelle Braun that says development on future car and truck programs has been paused due to the COVID-19 outbreak. But the document also mentions some intriguing information on upcoming powertrains for the C8 Corvette. Here are the details,
      Corvette Z06: 5.5L DOHC V8 known as the LT6 that will produce 650 horsepower and 600 pound-feet of torque. No mention of any type of forced-induction. Corvette Gran Sport: 6.2L OHC V8 with a hybrid system that's expected to produce 600 horsepower and 500 pound-feet of torque. Corvette ZR1: Twin-Turbo 5.5L DOHC V8, dubbed LT7. Output is expected to be 850 horsepower and 800 pound-feet. Corvette Zora: The powerhouse of the C8, it will take the Twin-Turbo LT7 and augment with a hybrid system. This is expected to produce 1,000 horsepower and 975 pound-feet of torque. Hagerty's report says the rollout of the new engines will begin in 2022 with the LT6, but the COVID-19 outbreak may push the plans back.
      Source: Hagerty

      View full article
    • By William Maley
      This week, Hagerty obtained a document from General Motors' executive director in charge of program management, Michelle Braun that says development on future car and truck programs has been paused due to the COVID-19 outbreak. But the document also mentions some intriguing information on upcoming powertrains for the C8 Corvette. Here are the details,
      Corvette Z06: 5.5L DOHC V8 known as the LT6 that will produce 650 horsepower and 600 pound-feet of torque. No mention of any type of forced-induction. Corvette Gran Sport: 6.2L OHC V8 with a hybrid system that's expected to produce 600 horsepower and 500 pound-feet of torque. Corvette ZR1: Twin-Turbo 5.5L DOHC V8, dubbed LT7. Output is expected to be 850 horsepower and 800 pound-feet. Corvette Zora: The powerhouse of the C8, it will take the Twin-Turbo LT7 and augment with a hybrid system. This is expected to produce 1,000 horsepower and 975 pound-feet of torque. Hagerty's report says the rollout of the new engines will begin in 2022 with the LT6, but the COVID-19 outbreak may push the plans back.
      Source: Hagerty
  • Reader Rides

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×
×
  • Create New...