Jump to content
Sign in to follow this  
Drew Dowdell

GM News: GM investing $56M over two plants

Recommended Posts

GM has announced total investments of $56M for capacity expansion to be spread over two of its existing manufacturing plants GM said in a press statement.  

$20M will be going to its Romulus Michigan propulsion plant to expand capacity of 10-speed transmission manufacturing. The investment will be used to purchase additional machining equipment.  GM 10-speed is used in their full-size rear-wheel drive SUVs and trucks. The Romulus plant currently employs about 1,350 people and also builds V6 engines. Expansion of the Romulus plant implies GM is preparing to expand the transmission to more models. 

An additional $36M in investment will go into its Lansing Delta Township plant to expand production and get ready for the refreshed Chevrolet Traverse and Buick Enclave crossovers. Built in 2006, Lansing Delta Township is GM's newest manufacturing facility. 


View full article

Share this post


Link to post
Share on other sites

Investment is always good news, usually some additional jobs too. Maybe some transfers from closing plants.

Share this post


Link to post
Share on other sites
15 hours ago, Drew Dowdell said:

yeah, but with such a low dollar amount, I can't imagine it is any huge number of people. 

I was thinking the same thing....their commitment to making stuff in the USA gets weaker every day.

Share this post


Link to post
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  



  • Social Stream

  • Similar Content

    • By Drew Dowdell
      After announcing the closure of 5 plants back in November, General Motors ended production of the Chevrolet Cruze at the Lordstown Ohio assembly plant last week.  Now, Ohio Governor Mike DeWine has said that in his discussions with General Motors, that the company has plans to make an announcement in about 4 to 6 weeks.  DeWine said that it is his understanding that GM is looking to sell the plant, but that he doesn't know who GM is talking to. 
      While he reiterated his uncertainty, he said
      The governor stated he or his office is in contact with GM at least twice a week. 

      View full article
    • By Drew Dowdell
      After announcing the closure of 5 plants back in November, General Motors ended production of the Chevrolet Cruze at the Lordstown Ohio assembly plant last week.  Now, Ohio Governor Mike DeWine has said that in his discussions with General Motors, that the company has plans to make an announcement in about 4 to 6 weeks.  DeWine said that it is his understanding that GM is looking to sell the plant, but that he doesn't know who GM is talking to. 
      While he reiterated his uncertainty, he said
      The governor stated he or his office is in contact with GM at least twice a week. 
    • By dfelt
      Your probably thinking, did I read the teaser right? Did it really say 2,581 lb-ft of torque or 3,500 NM from a 160 horsepower or 120 kW motor with torque vectoring?
      Yes, Yes you did! 
      GKN Automotive is proud to unveil the world's first battery electric vehicle (BEV) with a two-speed transmission and torque vectoring. GTD19 demonstrator vehicle is built from a Jeep Renegade and is currently in Arjeplog, Sweden undergoing winter testing. To prove the industry-leading standards of efficiency, safety and driving dynamics in this BEV model, GKN choose to go with a FWD version where torque vectoring can provide noticeable benefits than in a rear wheel drive or all-wheel drive platform. To Quote GKN:
      Why a two-speed gearbox? The setup in the GTD19 is engineered to ensure the shifts are seamless, with minimal loss of power and torque while providing faster acceleration and higher top speed with improved efficiency. What is the top speed you ask? The eTwinsterX allows a top speed of 155 mph or 250 kph.
      To quote Hannes Prenn, COO of GKN ePowertrain:
      The all new eTwinster powertrain can be easily adapted and integrated into existing vehicle platform for FWD, RWD or AWD configurations. Twinster torque vectoring delivers swift and smooth acceleration while providing greater lateral control and optimized driving dynamics. GKN has stated their eTwinster system is smaller than many equivalent systems from competitors allowing it to be easily integrated into existing vehicle plate forms as they did with the GTD19 replacing it's ICE powertrain. The small size allowed GKN to install in place of the ICE, the complete solution of electric motor, inverter controls, eAxle along with all required cabling leading to a very thin battery pack underneath the GTD19.
      GKN system integration allows them to offer the eTwinster powertrain as a readily adaptable solution for all types of auto's from all-wheel drive hypercars to plug-in hybrid luxury SUVs to entry-level city cars.
      If you have ever been in a Range Rover Evoque Hybrid, then you have already experienced the Twinster system as it can be added to the Hybrid solution with the Twinster unit in the back helping to improve the dynamics and calibration of the auto. This GKN solution will also show up in the Opel Insignia. To quote GKN:

      Where else will you see this amazing system that was the number one hybrid / electric vehicle system shown at the Geneva Auto show this year is in the BMW M3 Concept, Volvo XC90 demonstrator which will be paired with the T8 Twin Engine Plug-in Hybrids as well as Mercedes-Benz AMB GLA45 prototype.
       
       
    • By dfelt
      Your probably thinking, did I read the teaser right? Did it really say 2,581 lb-ft of torque or 3,500 NM from a 160 horsepower or 120 kW motor with torque vectoring?
      Yes, Yes you did! 
      GKN Automotive is proud to unveil the world's first battery electric vehicle (BEV) with a two-speed transmission and torque vectoring. GTD19 demonstrator vehicle is built from a Jeep Renegade and is currently in Arjeplog, Sweden undergoing winter testing. To prove the industry-leading standards of efficiency, safety and driving dynamics in this BEV model, GKN choose to go with a FWD version where torque vectoring can provide noticeable benefits than in a rear wheel drive or all-wheel drive platform. To Quote GKN:
      Why a two-speed gearbox? The setup in the GTD19 is engineered to ensure the shifts are seamless, with minimal loss of power and torque while providing faster acceleration and higher top speed with improved efficiency. What is the top speed you ask? The eTwinsterX allows a top speed of 155 mph or 250 kph.
      To quote Hannes Prenn, COO of GKN ePowertrain:
      The all new eTwinster powertrain can be easily adapted and integrated into existing vehicle platform for FWD, RWD or AWD configurations. Twinster torque vectoring delivers swift and smooth acceleration while providing greater lateral control and optimized driving dynamics. GKN has stated their eTwinster system is smaller than many equivalent systems from competitors allowing it to be easily integrated into existing vehicle plate forms as they did with the GTD19 replacing it's ICE powertrain. The small size allowed GKN to install in place of the ICE, the complete solution of electric motor, inverter controls, eAxle along with all required cabling leading to a very thin battery pack underneath the GTD19.
      GKN system integration allows them to offer the eTwinster powertrain as a readily adaptable solution for all types of auto's from all-wheel drive hypercars to plug-in hybrid luxury SUVs to entry-level city cars.
      If you have ever been in a Range Rover Evoque Hybrid, then you have already experienced the Twinster system as it can be added to the Hybrid solution with the Twinster unit in the back helping to improve the dynamics and calibration of the auto. This GKN solution will also show up in the Opel Insignia. To quote GKN:

      Where else will you see this amazing system that was the number one hybrid / electric vehicle system shown at the Geneva Auto show this year is in the BMW M3 Concept, Volvo XC90 demonstrator which will be paired with the T8 Twin Engine Plug-in Hybrids as well as Mercedes-Benz AMB GLA45 prototype.
       
       

      View full article
    • By Drew Dowdell
      The Buick LaCrosse and Chevrolet Volt have entered that great used car lot in the sky as of February 15th according to a GM announcement.  The Cadillac CT6 and Chevrolet Impala were originally scheduled to end production in June of 2019 but have now had their production schedules extended until January 2020. GM states that the reason for the extension is to allow for continued availability of the CT6-V, Blackwing Twin-Turbo V8, and Super Cruise. The Cadillac CT6 is also built in Jinqiao, China.
      GM had announced the closure of 5 plants back in November, including Hamtramck.  Lordstown Ohio will be the first plant to be unallocated with production stopping March 1st.  GM has stated that this restructuring would boost company cash flow by $6B by the end of 2020. 

      View full article
  • My Clubs

  • Recently Browsing

    No registered users viewing this page.

  • Reader Rides

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×
×
  • Create New...