Jump to content
Sign in to follow this  
William Maley

Detroit Auto Show Reveal: 2017 Ford GT: Comments

Recommended Posts


Now to the big story of the Detroit Auto Show, the return of the Ford GT.

The new GT is a mixture of the original GT40 and the 05-06 GT, while adding its own unique flavor to the mix. The front gets large air vents, a carbon-fiber front splitter, a massive air vent, and LED headlights. Around back are massive air ducts, two massive exhaust tips, an active spoiler, and the round taillights. The GT's interior is minimal in its layout with a flat-bottom steering wheel, a fully digital and customizable gauge cluster, and the new Sync 3 infotainment system. You can't move the seats due to seats being a key part of the carbon-fiber passenger, but Ford has made sure that the steering wheel and pedals are adjustable.

Now onto the powertrain; a twin-turbo 3.5L EcoBoost V6 producing over 600 horsepower with a seven-speed dual-clutch transmission getting that power to the rear wheels. A set of Michelin Pilot Super Sport Cup 2 tires hide a set of massive brakes to bring the car to a stop.

The Ford GT will be going on sale late next year as a 2017 model year vehicle.We'll likely learn final performance specs by then.

Source: Ford

Picture Credit - Drew Dowdell and Ford

Press Release is on Page 2


FORD REDEFINES INNOVATION IN AERODYNAMICS, ECOBOOST AND LIGHT-WEIGHTING WITH ALL-NEW FORD GT CARBON FIBER SUPERCAR

  • All-new Ford GT supercar sets new standards for Ford innovation through performance with advances in light-weighting, aerodynamics and ultra-efficient EcoBoost® engine
  • Ford GT features the most powerful EcoBoost production engine ever – a new twin-turbocharged Ford EcoBoost V6 producing more than 600 horsepower
  • Ultra-high-performance supercar is Ford’s most extreme offering, infused with race-proven technology engineered to keep company with exotics when it goes into production in 2016

Ford today unveiled the all-new GT, an ultra-high-performance supercar that serves as a technology showcase for top EcoBoost® performance, aerodynamics and lightweight carbon fiber construction.

The GT is one of more than 12 new Ford Performance vehicles coming by 2020. It joins Focus RS, F-150 Raptor, Shelby GT350 and Shelby GT350R in the growing Ford Performance lineup.

Beginning production late next year, the GT hits the road in select global markets to celebrate the 50th anniversary of Ford GT race cars placing 1-2-3 at the 1966 24 Hours of Le Mans.

“As we at Ford drive innovation into every part of our business, it’s worth remembering that our first innovation as a company was not in a laboratory, but on the racetrack,” said Mark Fields, Ford president and chief executive officer, referring to Henry Ford’s win of a 1901 car race that inspired financial backers to invest in his company. “We are passionate about innovation through performance and creating vehicles that make people’s hearts pound.”

The all-new GT supercar features rear-wheel drive, a mid-mounted engine, and a sleek, aerodynamic, two-door coupe body shell. It is propelled by the most powerful EcoBoost production engine ever – a next-generation twin-turbocharged EcoBoost V6 producing more than 600 horsepower.

The GT makes extensive use of lightweight materials, including carbon fiber and aluminum – enabling outstanding acceleration and handling with improved efficiency.

Ford’s commitment to and capability in delivering technologies typically offered only in elite vehicles is evident in the GT. These include advanced active aerodynamics, such as a deployable rear spoiler, and a host of material and technology innovations to help better serve the driver, such as SYNC® 3 – the latest version of Ford’s advanced connectivity system.

“The GT is the ultimate execution of an enthusiast supercar,” said Raj Nair, Ford group vice president, Global Product Development. “GT includes innovations and technologies that can be applied broadly across Ford’s future product portfolio – another proof point that Ford continues raising the performance bar while ultimately improving vehicles for all of our customers.”

Carbon fiber innovation

Few innovations provide a more wide-ranging performance and efficiency advantage than reducing weight. All factors of a vehicle’s capabilities – acceleration, handling, braking, safety, efficiency – can improve through the use of advanced, lighter materials.

The all-new GT features advanced lightweight composites, which will help serve Ford’s entire product lineup moving forward. With the broad application of structural carbon fiber elements, the GT will exhibit one of the best power-to-weight ratios of any production car.

Anchored by a carbon fiber passenger cell, the GT features aluminum front and rear subframes encapsulated in structural carbon fiber body panels. Carbon fiber is one of the world’s strongest materials for its mass – enabling an ultra-stiff foundation for chassis components, while creating a lighter overall package for increased dynamic performance and efficiency.

Most powerful production EcoBoost ever

Ford EcoBoost technology is available in every new Ford car, utility and light-duty pickup in North America beginning this year.

EcoBoost engines power a growing number of Ford performance models, including the new Mustang, just-announced F-150 Raptor, as well as Fiesta ST and Focus ST.

Based on the same race-proven engine architecture serving Ford’s IMSA Daytona Prototype endurance racing efforts, the next-generation twin-turbocharged 3.5-liter EcoBoost V6 in the GT features a wide powerband with impressive time-to-torque characteristics.

The engine demonstrates remarkable efficiency – a key attribute of its endurance racing-derived powertrain, where exceptional performance combined with efficiency is a critical competitive advantage.

Ford’s twin-turbo EcoBoost V6 raced to three wins in its first season of the IMSA TUDOR United SportsCar Championship in 2014, including a win in the prestigious 12 Hours of Sebring, along with seven podiums over more than 15,000 endurance racing miles.

The GT features an all-new, port/direct dual fuel-injection setup to improve engine response, plus a low-friction roller-finger-follower valvetrain. The twin-turbocharged EcoBoost V6 will be paired with a seven-speed dual-clutch transaxle for near-instantaneous gear changes and exceptional driver control.

Aero innovation gets active

Aerodynamic efficiency is at the heart of the GT design, actively reducing drag while aiding downforce and stability.

From its optimum tear-drop shape to its aircraft-inspired fuselage and visibility-enhancing curved windshield, every slope and shape is designed to minimize drag and optimize downforce.

Although each surface on the GT is functionally crafted to manage airflow, it also features fully active aerodynamic components to improve braking, handling and stability.

An active rear spoiler is keyed to both speed and driver input, reactively deploying and adjusting its height and/or pitch angle depending on conditions.

Designed for purpose

While it shares a legacy with classic Ford racing and performance cars, GT is a fully contemporary and functional shape that communicates modernity and pure beauty.

The state-of-the-art chassis is suspended by an active racing-style torsion bar and pushrod suspension, with adjustable ride height. The 20-inch wheels are shod with Michelin Pilot Super Sport Cup 2 tires featuring a unique compound and structure designed specifically for the Ford GT. Multi-spoke wheels encircle carbon-ceramic brake discs at all four corners.

The narrow-profile canopy reduces frontal area and caps a purposeful interior that provides state-of-the-art technology to ensure control, comfort and safety. The two-seat cockpit is accessed by upward-swinging doors, and features driver and passenger seats integrated directly into the carbon fiber passenger cell.

This configuration significantly reduces seating hardware and weight, and provides a consistent and direct sensory connection to the chassis. The fixed seating is combined with adjustable pedals and steering column to accommodate a very wide range of driver statures.

An F1-style steering wheel integrates all necessary driver controls, creating a stalkless steering column that allows uncluttered access to the transmission paddle-shift controls. A fully digital and configurable instrument cluster provides a wealth of driver-focused data. The display is configurable for multiple driving environments and different driving modes.

“While we hope enthusiasts rejoice about this all-new GT, all Ford customers will benefit from the ultimate performance Ford and its new-generation innovations,” said Nair.


View full article

Share this post


Link to post
Share on other sites

I hate to be "that guy" but the thing looks a lot like the new Acura NSX that is featured on the same homepage.

 

They both are going to be awesome cars, however they look like the same awesome car.

Share this post


Link to post
Share on other sites

The Ford GT is much more intense than the Acura NSX which makes it all the more gloriously insane.

 

But at the end of the day, they are both cut from the same shape. The NSX is a lot more subdued.

Share this post


Link to post
Share on other sites

WOW, THis is supercar sexy and way better than the Ehhhh NSX. I love this look.

Share this post


Link to post
Share on other sites

This doesn't even remotely resemble the NSX, are we even viewing the same car?  As for the new GT after the intial shock of it not looking the way I imagined it would, I must say this is one of the sexiest supercars in quite some time.  Way to go Ford.

  • Upvote 1

Share this post


Link to post
Share on other sites

I love this. Cars are starting to look so modern and different than what we've seen. I bought my first Ford two months ago. Although skeptical at first, I'm so happy I got it. The mileage is killing my lancer that I had before.

 

I look forward to buying another Ford in the future - maybe this one!

Share this post


Link to post
Share on other sites

This is not working for me, regardless that 'exotics' aren't my cup of mango juice.

RE the aerial view: I love the concept of what they were going for, but in profile the whole '1 car driving out of another' is so disharmonious...

 

I want to love the exhaust on the same level as the tails, but something is just not there. Perhaps if the tips were highlighted somehow, such as a subtle red to echo the tails...

 

Leaves me flat. Ford had SO much 'iconic moxie' with the '05-06 GT, and it's all gone here. 

Share this post


Link to post
Share on other sites

Your content will need to be approved by a moderator

Guest
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  



  • Similar Content

    • By William Maley
      Before the start of this year's Detroit Auto Show, Ford held a press conference revealing new models such as the new Bullitt Mustang and Ranger. But they also teased a new electric crossover wearing an iconic name - Mach 1. The only details provided by Ford is that it would provide a range of 300 miles and launch in 2020. A new report from Autocar has some possible new details on the vehicle.
      The Mach 1 crossover currently has the codename of CX430 and will likely have some design cues inspired by the Mustang. Underpinning the model will be Ford's C2 platform. Currently, this platform is being used for the next-generation Focus and Escape crossover.
      The Mach 1 is part of Ford's plan to launch 16 electric vehicles by 2022.
      Source: Autocar

      View full article
    • By William Maley
      Before the start of this year's Detroit Auto Show, Ford held a press conference revealing new models such as the new Bullitt Mustang and Ranger. But they also teased a new electric crossover wearing an iconic name - Mach 1. The only details provided by Ford is that it would provide a range of 300 miles and launch in 2020. A new report from Autocar has some possible new details on the vehicle.
      The Mach 1 crossover currently has the codename of CX430 and will likely have some design cues inspired by the Mustang. Underpinning the model will be Ford's C2 platform. Currently, this platform is being used for the next-generation Focus and Escape crossover.
      The Mach 1 is part of Ford's plan to launch 16 electric vehicles by 2022.
      Source: Autocar
    • By William Maley
      Last week, Ford halted production of their F-Series pickup after a fire ravaged a supplier's plant in Southwestern Michigan. While Ford and supplier Meridan said everything was ok, analysts said it the shutdown could hurt Ford if it lasted more than a week. Last night, Ford announced that it would restart production of the F-150 at their Dearborn plant on Friday. Production at Kansas City and Louisville will come back online on Monday.
      Getting to this point took a lot of work for both Ford and Meridan. According to Automotive News, Ford was the first automaker on site after the fire and was able to retrieve all of the tooling over a 48-hour period. One of dies used was shipped to Meridan's plant in Nottingham, UK. To get it there was a bit of a challenge since it weighs 87,000 pounds. Ford was able to charter an Antonov cargo plane (one of just 21 planes in the world that handle this task) and get it shipped to the UK in just 30 hours.
      Faced with unexpected adversity, the Ford team, including our global supply partners, showed unbelievable resiliency, turning a devastating event into a shining example of teamwork. Thanks to their heroic efforts, we are resuming production of some of our most important vehicles ahead of our original targets," said Hau Thai-Tang, Ford's executive vice president of product development and purchasing in a statement.
      Ford declined to say how much production was lost during the shutdown. James Albertine, an analyst with Consumer Edge Research said the week before that Ford could lose up to 15,000 trucks due per week due to the shutdown.
      The company is planning to make up for some of the lost production by shortening the summer shutdown at the Dearborn and Kansas City plants.
      Source: Automotive News (Subscription Required), Ford


      Ford Restarting F-150, Super Duty Production Ahead Of Schedule After Fire At Magnesium Parts Supplier
      Ford is resuming production of the F-150 pickup at Dearborn Truck Plant on Friday. Ford team has also successfully repaired the supply chain for Super Duty; production targeted to restart by Monday for Super Duty at Kentucky Truck Plant and F-150 at Kansas City Assembly Plant Ford marshaled a global team of experts, that included partners and suppliers, following a May 2 fire at Meridian Magnesium Products in Eaton Rapids, Mich., to quickly refurbish and relocate tooling needed to produce parts for the Ford F-150, Super Duty and five other vehicles – Ford Expedition, Explorer, Flex and Lincoln Navigator and MKT Because of this quick action, Meridian is producing truck parts again at its Eaton Rapids facility. Plus, Ford airlifted tooling to a Meridian facility in the U.K. to produce parts for F-150, which will further speed production ramp-up Ford Expedition, Explorer, Flex and Lincoln Navigator and MKT production continue uninterrupted Company reaffirms 2018 adjusted EPS guidance range of $1.45 to $1.70; expects adverse impact of $0.12 to $0.14 per share in second quarter due to lost production DEARBORN, Mich., May 16, 2018 – Ford Motor Company is restarting production of the popular F-150 at Dearborn Truck Plant Friday after just over one week of downtime. The company has also successfully repaired the supply chain for Super Duty, with production targeted to restart by Monday at the Kentucky Truck Plant as well as the Kansas City Assembly Plant that also makes F-150 pickups.
      This follows the massive May 2 fire at the Meridian Magnesium Products facility in Eaton Rapids, Mich.
      “While the situation remains extremely dynamic, our teams are focused on returning our plants to full production as fast as possible,” said Joe Hinrichs, Ford president, Global Operations. “The ramp-up time to full production is improving every day.”
      Ford teams, together with suppliers including Walbridge and other contractors, worked nearly around the clock to get America’s best-selling vehicle franchise back on line as quickly as possible.
      The teams removed 19 dies from Meridian’s badly damaged facility, and in one case, moved an 87,000-pound die from Eaton Rapids, Mich., to Nottingham, U.K., via an Antonov cargo plane – one of the largest in the world – in just 30 hours door-to-door. A die is a tool used to cut or shape material using a press.
      “Faced with unexpected adversity, the Ford team, including our global supply partners, showed unbelievable resiliency, turning a devastating event into a shining example of teamwork,” said Hau Thai-Tang, Ford’s executive vice president of Product Development and Purchasing. “Thanks to their heroic efforts, we are resuming production of some of our most important vehicles ahead of our original targets.”
      Work started immediately in the aftermath of the May 2 fire. Teams removed and remediated safety concerns – including dangling siding – and restored electricity, gaining approval to access the site while debris still smoldered inside.
      This allowed Ford and Meridian to safely retrieve and relocate tools to more quickly resume part production and work to minimize the financial impact of the stalled plants.
      Ford recovered, repaired and validated most dies that were at the Eaton Rapids facility, and Meridian is now producing parts for the F-150 at two locations – Eaton Rapids and Nottingham, U.K. Production of bolsters for Super Duty is also restarting at the Eaton Rapids plant.
      Under normal circumstances, moving tooling the size of a bolster die would take approximately 10 days just to get the proper import and export approvals. However, Ford and its suppliers managed to cut the total time for the entire move to 30 hours, including trans-Atlantic flight time.
      When the team removed the die from the Eaton Rapids factory, it was shipped to Rickenbacker International Airport in Columbus, Ohio. Rickenbacker had both the capacity to handle such a large piece of equipment and allowed an Antonov An-124 Russian plane, one of the largest planes in the world – typically used to transport trains, dump trucks and even a 25-foot sea yacht – to take off as soon as the equipment was loaded.
      Nearly 4,000 miles away, a team in Nottingham was waiting to receive the die and take it to Meridian’s nearby factory. In between, the Ford team received a U.K. import license for the die – a mere two hours before the plane touched down.
      Parts produced at Nottingham are being shipped via daily flights on a Boeing 747 jet until production in Eaton Rapids returns to pre-fire levels.
      Inventories of Ford’s best-selling F-Series pickups and other vehicles remain strong and customers won’t have a problem finding the model they want.

      View full article
    • By William Maley
      Last week, Ford halted production of their F-Series pickup after a fire ravaged a supplier's plant in Southwestern Michigan. While Ford and supplier Meridan said everything was ok, analysts said it the shutdown could hurt Ford if it lasted more than a week. Last night, Ford announced that it would restart production of the F-150 at their Dearborn plant on Friday. Production at Kansas City and Louisville will come back online on Monday.
      Getting to this point took a lot of work for both Ford and Meridan. According to Automotive News, Ford was the first automaker on site after the fire and was able to retrieve all of the tooling over a 48-hour period. One of dies used was shipped to Meridan's plant in Nottingham, UK. To get it there was a bit of a challenge since it weighs 87,000 pounds. Ford was able to charter an Antonov cargo plane (one of just 21 planes in the world that handle this task) and get it shipped to the UK in just 30 hours.
      Faced with unexpected adversity, the Ford team, including our global supply partners, showed unbelievable resiliency, turning a devastating event into a shining example of teamwork. Thanks to their heroic efforts, we are resuming production of some of our most important vehicles ahead of our original targets," said Hau Thai-Tang, Ford's executive vice president of product development and purchasing in a statement.
      Ford declined to say how much production was lost during the shutdown. James Albertine, an analyst with Consumer Edge Research said the week before that Ford could lose up to 15,000 trucks due per week due to the shutdown.
      The company is planning to make up for some of the lost production by shortening the summer shutdown at the Dearborn and Kansas City plants.
      Source: Automotive News (Subscription Required), Ford


      Ford Restarting F-150, Super Duty Production Ahead Of Schedule After Fire At Magnesium Parts Supplier
      Ford is resuming production of the F-150 pickup at Dearborn Truck Plant on Friday. Ford team has also successfully repaired the supply chain for Super Duty; production targeted to restart by Monday for Super Duty at Kentucky Truck Plant and F-150 at Kansas City Assembly Plant Ford marshaled a global team of experts, that included partners and suppliers, following a May 2 fire at Meridian Magnesium Products in Eaton Rapids, Mich., to quickly refurbish and relocate tooling needed to produce parts for the Ford F-150, Super Duty and five other vehicles – Ford Expedition, Explorer, Flex and Lincoln Navigator and MKT Because of this quick action, Meridian is producing truck parts again at its Eaton Rapids facility. Plus, Ford airlifted tooling to a Meridian facility in the U.K. to produce parts for F-150, which will further speed production ramp-up Ford Expedition, Explorer, Flex and Lincoln Navigator and MKT production continue uninterrupted Company reaffirms 2018 adjusted EPS guidance range of $1.45 to $1.70; expects adverse impact of $0.12 to $0.14 per share in second quarter due to lost production DEARBORN, Mich., May 16, 2018 – Ford Motor Company is restarting production of the popular F-150 at Dearborn Truck Plant Friday after just over one week of downtime. The company has also successfully repaired the supply chain for Super Duty, with production targeted to restart by Monday at the Kentucky Truck Plant as well as the Kansas City Assembly Plant that also makes F-150 pickups.
      This follows the massive May 2 fire at the Meridian Magnesium Products facility in Eaton Rapids, Mich.
      “While the situation remains extremely dynamic, our teams are focused on returning our plants to full production as fast as possible,” said Joe Hinrichs, Ford president, Global Operations. “The ramp-up time to full production is improving every day.”
      Ford teams, together with suppliers including Walbridge and other contractors, worked nearly around the clock to get America’s best-selling vehicle franchise back on line as quickly as possible.
      The teams removed 19 dies from Meridian’s badly damaged facility, and in one case, moved an 87,000-pound die from Eaton Rapids, Mich., to Nottingham, U.K., via an Antonov cargo plane – one of the largest in the world – in just 30 hours door-to-door. A die is a tool used to cut or shape material using a press.
      “Faced with unexpected adversity, the Ford team, including our global supply partners, showed unbelievable resiliency, turning a devastating event into a shining example of teamwork,” said Hau Thai-Tang, Ford’s executive vice president of Product Development and Purchasing. “Thanks to their heroic efforts, we are resuming production of some of our most important vehicles ahead of our original targets.”
      Work started immediately in the aftermath of the May 2 fire. Teams removed and remediated safety concerns – including dangling siding – and restored electricity, gaining approval to access the site while debris still smoldered inside.
      This allowed Ford and Meridian to safely retrieve and relocate tools to more quickly resume part production and work to minimize the financial impact of the stalled plants.
      Ford recovered, repaired and validated most dies that were at the Eaton Rapids facility, and Meridian is now producing parts for the F-150 at two locations – Eaton Rapids and Nottingham, U.K. Production of bolsters for Super Duty is also restarting at the Eaton Rapids plant.
      Under normal circumstances, moving tooling the size of a bolster die would take approximately 10 days just to get the proper import and export approvals. However, Ford and its suppliers managed to cut the total time for the entire move to 30 hours, including trans-Atlantic flight time.
      When the team removed the die from the Eaton Rapids factory, it was shipped to Rickenbacker International Airport in Columbus, Ohio. Rickenbacker had both the capacity to handle such a large piece of equipment and allowed an Antonov An-124 Russian plane, one of the largest planes in the world – typically used to transport trains, dump trucks and even a 25-foot sea yacht – to take off as soon as the equipment was loaded.
      Nearly 4,000 miles away, a team in Nottingham was waiting to receive the die and take it to Meridian’s nearby factory. In between, the Ford team received a U.K. import license for the die – a mere two hours before the plane touched down.
      Parts produced at Nottingham are being shipped via daily flights on a Boeing 747 jet until production in Eaton Rapids returns to pre-fire levels.
      Inventories of Ford’s best-selling F-Series pickups and other vehicles remain strong and customers won’t have a problem finding the model they want.
    • By William Maley
      The list of automakers skipping the 2019 Detroit Auto Show continues to grow. Automotive News reports that Audi is the latest automaker to skip next year's show. The company wrote in a statement that it "has had a long and successful history at NAIAS, debuting countless models that Audi customers enjoy today. For 2019, we have decided that we will not participate in NAIAS. We will continue to evaluate Auto Shows on a case by case basis relative to the timing of our product introductions and the value the show brings from a media and consumer perspective."
      Just within the past few months, both BMW and Mercedes-Benz have announced they would be no-shows for the 2019 Detroit Auto Show for similar reasons. Other reasons cited by automakers include reallocating money for marketing, not wanting to compete for attention with other automakers, and more competition from other shows such as the Consumer Electronics Show.
      The Detroit Auto Dealers Association, the group who puts on the show is trying their best to lure automakers to the show once again. A spokesman told Automotive News that plans are underway to change up the show and provide automakers "a global stage that delivers cost-effective opportunities to audiences" that "only Detroit" can offer. There is also talk of moving the show to October.
      Source: Automotive News (Subscription Required)

      View full article
  • My Clubs

  • Recently Browsing

    No registered users viewing this page.

  • Reader Rides

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.