67impss

Can I get an Imperial Blue Commodore Sport Wagon & whats the lead time for the slow boat from OZ?

I missed it, Gone now what kinda wagon??????

Biscayne Bay FL

Very happy for ya Rj my best friend bought an 08 Turbo what a blast & great milage. Have fun man

Thanx for the NVH clue guys

Enjoy your day & may your glass be 1/2 full

Maybe he was looking for Charlies place

itch

Panther

"While I wouldn't take an Impala LTZ over an A6 FWD 2.0 TDI, I would certainly take a nicely equipped Lacrosse with a Euro tune to it's suspension. The difference in NHV alone would be worth it." NHV? been seeing this a lot here and Googled but to no avail mite you enlighten me

dime

Radio Gaga

Makes a great 403cid or larger gasser looks like there's a 440cid diesel/gasser kit sold by Mondello

Minimal I think that I've seen this done on a Banks turbo'ed 5.7 Olds diesel in one of the Hot Rod rags at one time or another

As far as fitment goes, of course: diesel WAS the Olds 350, and the V8-6-4 WAS the 368, so those 4 engines are only 2. Also on this list was the 4.1L V6. Retro-fitting an STS Northstar system into a E Touring Coupe would be a hoot n a half. Still sharp designs, esp the TCs. There was also the non-V8-6-4 version of the 368 in 1980, and the gas Olds 350 in '79-80. Including the V6 in '81-82, 6 engines.. You misunderstand me. You're talking about different engine 'trims', I'm talking about the physicalities of different engines bolting in (in reference to your post about fitting a NorthStar in). '79-85 Eldos ran 3 different engine 'architectures' from the factory: the 252, 350 & 368 (but as bandied about here- likely a number of others would work). Only question I have is would a 472/500/THM425 fit width-wise WRT the transaxle.. Will fit as it is N/S orientation see below pic of engine bay

As far as fitment goes, of course: diesel WAS the Olds 350, and the V8-6-4 WAS the 368, so those 4 engines are only 2. Also on this list was the 4.1L V6. Retro-fitting an STS Northstar system into a E Touring Coupe would be a hoot n a half. Still sharp designs, esp the TCs. There was also the non-V8-6-4 version of the 368 in 1980, and the gas Olds 350 in '79-80. Including the V6 in '81-82, 6 engines.. You misunderstand me. You're talking about different engine 'trims', I'm talking about the physicalities of different engines bolting in (in reference to your post about fitting a NorthStar in). '79-85 Eldos ran 3 different engine 'architectures' from the factory: the 252, 350 & 368 (but as bandied about here- likely a number of others would work). Only question I have is would a 472/500/THM425 fit width-wise WRT the transaxle.. If 368 was a factory in the E/W N/S fitment then the 472 / 500 will work as they are of the same blk architecture. Fixed

Won't work wrong bell as it uses Chevys not BOP so nada on the small blks

On HCCI engines operating in the blue band is that the torque band if not I'd like to see that indicated & a hash mark @ max HP

As stated don't know what bell Holden used on their V8's though I suspect it would be Chevys bell. The 3.8L N/S's could be the same as the Chevy's maybe James from Oz would know or?

OK now if the 5.7 Olds fits then a 6.0L (403cid) fits possibly even a 425 or 455 all will fit the tranny & engine mnts The Buick the same thing all older Engines would bolt rt up short of nail heads & older Caddys 472 500 425 368 all will fit& may be able to install all emission controls even knock sensor getting creative. Also no worries with the Turbo Hydromatic as the '70 500cid put out 550 lb·ft (750 N·m) @ 3000 rpm piddly North * would never make that much Getting clever with the exhaust you could use Poncho engines GMC v6 ??????? Bathy? I'm not sure on that engines bell housing but that would be soooo way out there Chevy Bell is different Holdens engine may or may not work as they used Turbo trannys but not sure on the bell So in a nutshell take your pick

Wagon LOVE!

We need to use up the stockpile of portholes we have China can do that for us

Revolution

bier garten