Jump to content
Drew Dowdell

Buick Encore and Encore GX Debut in Shanghai :Comments

Recommended Posts

2020-buick-encore-gx-for-china-1.jpgBuick unveiled a pair of Buick Encores at the Shanghai Auto Show yesterday.  The regular Encore (below) is about the same size as the current model sold in the US and likely sits on the same Gamma II platform as the current car. 

Additionally, Buick released a long-wheelbase version called the Encore GX (Above, Side).  This model will likely make it to the US.  Details are scant, but this likely sits on GM's new VSS-F platform.  Both are powered by an eighth-generation Ecotech (probably the 1.5T) paired either with a 9-speed hydromatic or an optional CVT. These engine promise better fuel economy and emissions.

The Buick Encore has been Buick's best selling model for the past three years. The design of the Encores is familiar yet modernized. A large grille with winged embellishments support the center Buick badge. The sheet metal looks taught and athletic.  

No word yet on any timeline for arrival in the US. At least one of these will make it Stateside, possibly both given hot crossover market, we could see space for both models in the US. 

All-New Buick Encore.jpg

 

 

 

 

 

 

2020-buick-encore-for-china-1.jpg


View full article

Share this post


Link to post
Share on other sites

While I could get into the Encore and no one could sit behind me, I am interested to know how much space is gained in the GX model? 🤔

Share this post


Link to post
Share on other sites

I get Kona vibes from the regular wheelbase version.

 

Share this post


Link to post
Share on other sites

Looks like a RAV4.  A lot of Toyota in that design.

Share this post


Link to post
Share on other sites

They did a good job of adapting larger Buick styling cues like the grille and taillights onto a small package.   Sharp. 

  • Upvote 2

Share this post


Link to post
Share on other sites
4 minutes ago, Matt 967 said:

Both look good but I like the blue one! 

I like the copper one!

Share this post


Link to post
Share on other sites

If they bring the longer Buick and the shorter Chevy, then where does the Granite fit?  Which version of the GMC will be built?  I do like both Buicks.  The shorter Chevy, with its "baby Blazer" face, looks cool to me, I like the windshield situation, it appears relatively flat and steeply raked, sort of SAAB-like.  This should make the dash shallower.  A deep dash is wasted passenger space, imo.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Who's Online   0 Members, 0 Anonymous, 67 Guests (See full list)

    There are no registered users currently online



  • Social Stream

  • Similar Content

    • By Drew Dowdell
      Cadillac will be unveiling the Cadillac CT4 along with a V-series version on May 30th according to Motor1.
      Both the CT4 and CT5 ride on a second generation Alpha platform called Alpha 2.  The CT5 is offered in rear-wheel drive with all-wheel drive being an option. It is highly likely that the CT4 will get this same offering. 
      There is word that the V-series version of the Cadillac CT5 will also debut.  It is likely to pack the same 4.2-liter Blackwing V8 that is available in the CT6. The CT4 V-series is likely to get an uprated version of the 3.0TT.
      While the CT5 is more of a fastback style, the spyshots of the CT4 shows a more conventional sedan profile and an Escala style grille similar to the CT5's.
      The CT5 is likely to start in the high mid-$30k range while the CT4 will be aimed more at entry-level luxury buyers. 

      View full article
    • By Drew Dowdell
      Cadillac will be unveiling the Cadillac CT4 along with a V-series version on May 30th according to Motor1.
      Both the CT4 and CT5 ride on a second generation Alpha platform called Alpha 2.  The CT5 is offered in rear-wheel drive with all-wheel drive being an option. It is highly likely that the CT4 will get this same offering. 
      There is word that the V-series version of the Cadillac CT5 will also debut.  It is likely to pack the same 4.2-liter Blackwing V8 that is available in the CT6. The CT4 V-series is likely to get an uprated version of the 3.0TT.
      While the CT5 is more of a fastback style, the spyshots of the CT4 shows a more conventional sedan profile and an Escala style grille similar to the CT5's.
      The CT5 is likely to start in the high mid-$30k range while the CT4 will be aimed more at entry-level luxury buyers. 
    • By Drew Dowdell
      Buick is reportedly working on a crossover coupe to add to its lineup in the US.  This vehicle would be in addition to, rather than replace, any vehicles in the current lineup. 
      Most of Buick's recent lineup has been a rebadge of some other brand's designs, this new vehicle would be a departure from that with Buick leading the design process from the start. CarDesignNews was shown some sketches and models of future Buicks and what they saw would "turn everything you think about Buick on its ear".  It is a bold design that will shock people both inside and outside the industry.  The designs would feel familiar without using specific cues. 
      Buick also took the time to insist that Buick would not become a China-only brand even though 4 out of every 5 Buicks are sold there. The bulk of the design work takes place in Warren, Michigan, while smaller design teams work in Shanghai, Melbourne, and near Seoul. 
      As far as the name, Buick has trademarked Enspire for the U.S., so that has a strong possibility of coming to fruition. No timeline is set for the release of the new crossover, but the overhaul of the Buick look is well underway.
       

      View full article
    • By Drew Dowdell
      Buick is reportedly working on a crossover coupe to add to its lineup in the US.  This vehicle would be in addition to, rather than replace, any vehicles in the current lineup. 
      Most of Buick's recent lineup has been a rebadge of some other brand's designs, this new vehicle would be a departure from that with Buick leading the design process from the start. CarDesignNews was shown some sketches and models of future Buicks and what they saw would "turn everything you think about Buick on its ear".  It is a bold design that will shock people both inside and outside the industry.  The designs would feel familiar without using specific cues. 
      Buick also took the time to insist that Buick would not become a China-only brand even though 4 out of every 5 Buicks are sold there. The bulk of the design work takes place in Warren, Michigan, while smaller design teams work in Shanghai, Melbourne, and near Seoul. 
      As far as the name, Buick has trademarked Enspire for the U.S., so that has a strong possibility of coming to fruition. No timeline is set for the release of the new crossover, but the overhaul of the Buick look is well underway.
       
    • By Drew Dowdell
      The Hyundai Sonata broke cover a couple of weeks before the New York Auto Show, but I finally got to see it on Thursday.  While there are frequent reports that the midsize sedan segment is dying, it still is able to move about 153,000 units just in the month of March.  Hyundai sees an opportunity here as some of its competition, namely the Ford Fusion, will be going to the great used-car lot in the sky in the near future.  Still, the Sonata has only sold around 21,000 units year to date while Nissan can move that many Altimas in a month and Accord and Camry do even better.  So what is Hyundai going for here by introducing a new Sonata?  They're going for sexy.
      The midsize market is a conservative one, few models are ever called sexy. Hyundai has gone out of their way to give the Sonata a sexy look without looking odd (Accord) or overwrought (Camry). Up front, there is a huge.. HUGE...grille opening. It has the somewhat traditional six-sided shape but is pinched in a little at the bottom.  Above that are the lighting accents that most everyone will mention when talking about this car.  Along the hood, they are chrome strips that light up when the car is on.  Once this thing hits the streets it will be a very distinctive visual feature that will separate this car from the Accords and Camrys.  The character line flows from the headlights along the body in a very slight S-curve.  Multiple creases on the door panels help keep the car from looking slab-sided. The wheels are an attractive two-tone 10-spoke design.  Around back is a full-width U-shape taillamp setup that looks like the Honda Civic setup, but upside down. It integrates into a rather tall (for a family sedan) spoiler on the rear trunk like. The tops of the taillights have small fins that ostensibly direct airflow the way Hyundai intends.  The overall exterior is handsome and sensuous and does a good job of distinguishing itself from others in the class. 
       Inside is a mixed bag. The overall look is handsome and restrained, but areas of cost-cutting were visible. There is cheaper plastic on the door panels, lower dash, and parts of the center console.  Still, it is hard to argue with a full TFT screen for the gauge cluster and a large, wide infotainment system in the center.  The infotainment system sits high on the dash and looks like a tablet popping up from below. Controls are simple and easy to reach, and Hyundai has joined the ranks of the new decade by removing the shifter and replacing it with push-button controls. I like Hyundai's setup better than Honda's which I have to think about to use. The seats are a bit flat, but there is plenty of head and leg room. I do like Hyundai's use of two-tone interior, but that won't be on all cars. 
      At release, the Hyundai Sonata will come with two engines, a 2.5 direct injected 4-cylinder with 191 horsepower at 6,100 RPM and 181 lb-ft of torque at 4,000 rpm. An optional 1.6T will have 180 horsepower at 5,500 rpm and 195 lb-ft of torque from 1,5000 - 4,500 rpm.  The 2.5 will get 33mpg combined and the 1.6T will get 31mpg combined.   Some have balked at the idea that the buy-up engine has less horsepower than the base engine, but in this case, it is the flat torque curve that will really make the 1.6T feel faster.  For those who are wanting more power, Hyundai is reportedly working on an N-Line version that will have over 275 horsepower.  For the greenies, a hybrid is coming soon as well, with a possibly plug-in version in the works. Driving impressions will have to wait until this fall.
      Overall, Hyundai has a very strong contender for the shrinking mid-size market. Not all of the Ford Fusion owners will go to crossovers, so Hyundai looks ready to scoop them up.
       


      View full article
  • My Clubs

  • Reader Rides

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×
×
  • Create New...