Jump to content
William Maley

Ask Me About: 2019 Chevrolet Silverado LT Trail Boss Crew Cab

Recommended Posts

"I love it when a plan comes together." Hannibal from the A-Team.

I wasn't expecting to get back into a review vehicle for some time as the Detroit Auto Show tends to reduce the number of vehicles available - they're reserved for those coming out-of-state and OEM representatives. I thought next month is when I would begin my rotation once again. But a surprise email this morning from General Motors asking if I was able to take a 2019 Chevrolet Silverado today. Of course!

This particular Silverado is an LT Trail Boss Crew Cab with the 5.3L V8 and eight-speed automatic transmission. Base is $48,300 and my as-tested price comes to $55,965 with a few option packages like the Convenience package (front bucket seats, dual-zone climate control, and heated steering wheel).

First Impressions?

  • Even though it may appear the truck is black, it is actually painted a dark blue (blame my iPhone). Even though I'm not sold on the design on the Silverado as a whole, the Trail Boss make it look aggressive.
  • Interior looks a rehash of the one seen in the previous Silverado. Material quality is better, but I was kind of hoping more in terms of design.
  • 5.3L V8 doesn't feel muzzled when leaving a stop or needing to accelerate quickly - THANK YOU GM!
  • Haven't quite figured out how to open the power tailgate. Spent a few moments just pressing the button and not having the tailgate come down. Need to some reading in the owners manual.

I'll be trying my best to update this piece with other observations and impressions throughout the week. You can also drop some questions below if you want to something about the truck.

Gallery: 2019 Chevrolet Silverado LT Trail Boss Crew Cab


View full article

Share this post


Link to post
Share on other sites

How is the forward visibility from the driver's seat?  The front end seems awfully tall..

  • Upvote 2

Share this post


Link to post
Share on other sites
54 minutes ago, Drew Dowdell said:

How is the ride? Bouncy or more soft?

Bouncy. Can't tell if its due to the Z71 off-road package or the tires. I think I've been spoiled by driving too many Ram 1500s.

35 minutes ago, Robert Hall said:

How is the forward visibility from the driver's seat?  The front end seems awfully tall..

About what I expected where I can't fully place where my front wheels or front end at the moment. I expect this go away in a few days time.

Share this post


Link to post
Share on other sites

Did you put a bag on its hood while you were driving it?  ('cause its sooooo ugly)

But then again, all black like that and it becomes a 'butterface'...  

 

  • Haha 2

Share this post


Link to post
Share on other sites

Pretty cool.  Keys please.

  • Upvote 1

Share this post


Link to post
Share on other sites

That is the best looking image of that ugly mug! :P 

William, does the seat go all the way down to the floor or does it stop and still have considerable gap underneath?

If the seat is all the way back for long legs, how much room is between the back of the front seat and the back seat? Can a person site behind the driver?

Yes Tall person who has found like the 2007 Escalade over the 2006 I could not sit in with out being seriously reclined due to the seat not going all the way down to the floor for us very tall body people..

Share this post


Link to post
Share on other sites
17 hours ago, oldshurst442 said:

Did you put a bag on its hood while you were driving it?  ('cause its sooooo ugly)

But then again, all black like that and it becomes a 'butterface'...  

 

Heh. As my younger brother put it, at least its less ugly. (I think I like it).

Share this post


Link to post
Share on other sites

I may be one of the few people here that doesn’t have a problem with the exterior design. The interior is a whole other matter though. 

  • Upvote 1

Share this post


Link to post
Share on other sites
5 hours ago, William Maley said:

Heh. As my younger brother put it, at least its less ugly. (I think I like it).

Your brother is dead on. Its less ugly all black like that.  All black vehicles are all sinister lookin'. This one is no different. Even more so because its ugly.  I mean, there are some all black cars that are sinister, mean lookin', but they have a certain scary charm to them.  Like Dracula. 

This thing is Freddy Kruger sinister scary in all black clothes.   (I think I like it a little also)

3 hours ago, surreal1272 said:

I may be one of the few people here that doesn’t have a problem with the exterior design. The interior is a whole other matter though. 

I never got past the front end of the 2019 Silverado to tell you the truth.   Im afraid to take a peak inside and see what is what. 

Maybe at the Montreal Auto Show...

Oh dang...it finishes tomorrow and Im working. Oh well... 

Share this post


Link to post
Share on other sites
On 1/25/2019 at 8:18 PM, dfelt said:

That is the best looking image of that ugly mug! :P 

William, does the seat go all the way down to the floor or does it stop and still have considerable gap underneath?

If the seat is all the way back for long legs, how much room is between the back of the front seat and the back seat? Can a person site behind the driver?

Yes Tall person who has found like the 2007 Escalade over the 2006 I could not sit in with out being seriously reclined due to the seat not going all the way down to the floor for us very tall body people..

And welcome to what will be known as the @dfelt/basketball player seat space tests.

To begin, the front seat does go a way decent way down - but not all way the way to the floor. I was able to stick my hand vertically with no issue.  Now, I think most tall people will not have any issues if you avoid the sunroof. My tester lacks it and there is a large cutout in the roof panel. With my seat in place, I have about 5 to 7 inches of space between my head.

At first glance, I thought the Silverado would be ok with the front seat all the way back as I found the standard seating position to be similar to a large luxury sedan. But putting the seat all of the way back, I found that I had a small gap between my knees and the seat.

I'll work on getting some photos later in the week to illustrate this.

  • Thanks 1

Share this post


Link to post
Share on other sites

Interested in the rear seat area- the bottoms flip rearward... what's beneath the seat? If it's a carpeted steel wall- can you tell how it's attached to the body (bolted or spot-welded)?

Share this post


Link to post
Share on other sites
19 hours ago, balthazar said:

Interested in the rear seat area- the bottoms flip rearward... what's beneath the seat? If it's a carpeted steel wall- can you tell how it's attached to the body (bolted or spot-welded)?

You have a little storage box that holds the emergency jack. (I have included a picture below). Judging from how this piece is installed - a few bolts - I believe this can be removed.

I can't fully tell how the steel wall is attached to the body.

IMG_2670.JPG

  • Thanks 4

Share this post


Link to post
Share on other sites
On 1/26/2019 at 2:07 PM, surreal1272 said:

I may be one of the few people here that doesn’t have a problem with the exterior design. The interior is a whole other matter though. 

I think a black on black  Trail Boss trim is about as pretty as this new Silverado gets. 

@William Maley will you be taking it out in the massive snow storm you are getting right now? 

  • Upvote 1

Share this post


Link to post
Share on other sites
46 minutes ago, Drew Dowdell said:

I think a black on black  Trail Boss trim is about as pretty as this new Silverado gets. 

@William Maley will you be taking it out in the massive snow storm you are getting right now? 

Depends how the weather is later today. At the moment, it is currently lightly snowing.

Share this post


Link to post
Share on other sites
27 minutes ago, William Maley said:

Depends how the weather is later today. At the moment, it is currently lightly snowing.

Since your supposed to get sub-zero Artic blast with heavy Snow, how fast do the new heaters / defrost warm up? less than 30 seconds?

Share this post


Link to post
Share on other sites
57 minutes ago, William Maley said:

Depends how the weather is later today. At the moment, it is currently lightly snowing.

And now the snow is starting to fall a bit more steadily. 

IMG_2671.JPG

  • Upvote 1

Share this post


Link to post
Share on other sites
1 minute ago, William Maley said:

And now the snow is starting to fall a bit more steadily. 

IMG_2671.JPG

it looks lonely

  • Haha 1
  • Upvote 1

Share this post


Link to post
Share on other sites
4 minutes ago, Drew Dowdell said:

it looks lonely

I was thinking it looks just right in the elements for a Trail Boss. Yea could use a Canyon Trail boss next to it. :P 

  • Haha 1

Share this post


Link to post
Share on other sites
9 minutes ago, Drew Dowdell said:

How much snow are you forecast for @William Maley ?

We're expecting somewhere between 5 to 7 inches according to the current forecast.

Share this post


Link to post
Share on other sites
3 minutes ago, William Maley said:

We're expecting somewhere between 5 to 7 inches according to the current forecast.

Time to switch it to 4L and find some fun!

  • Upvote 2

Share this post


Link to post
Share on other sites
1 hour ago, Drew Dowdell said:

Time to switch it to 4L and find some fun!

Hell yes.

Share this post


Link to post
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Social Stream

  • Similar Content

    • By William Maley
      Seven years ago, I drove the previous-generation Mitsubishi Outlander for a week-long review. There was a lot to like about the previous model as it featured distinctive shape, comfortable ride, and being somewhat fun to drive. But in other areas, the model fell a bit flat. Poor material choices, firm ride, and the optional V6 engine feeling slightly lackluster. I ended my review with this,
      “Mitsubishi has shown a new Outlander at the Geneva Motor Show earlier this year. Underneath the Outlander’s new sheet metal lies a new vehicle architecture and will have the choice between gas and plug-in hybrid power. The new Outlander also gets revised interior and new safety equipment. The question is will the new Outlander be able to fix the problems of the current one?”
      It has taken a fair amount of time to get my hands on the new Outlander. In that time, Mitsubishi has made a number of changes and updates to the Outlander lineup such as a revised exterior. Was it worth the wait?
      The Outlander’s shape is nothing too special with rounded corners, large glass area, and a set of 18-inch alloy wheels that comes standard on most models. For 2019, Mitsubishi has updated the Outlander’s front end with a new grille shape, headlights, and more chrome trim. It does help spruce up the design that has been with us since 2014. My only complaint is the dark silver paint on my tester. It makes the vehicle look like a giant blob. There isn’t anything that sets the interior apart from rivals. The design is somewhat plain, but material quality is quite surprising with an abundance of soft-touch materials. There is a fair amount of piano black trim, which does attract fingerprints. All Outlanders come with a 7-inch touchscreen running Mitsubishi’s latest infotainment system is standard. Those wanting Apple CarPlay and Android Auto need to step up to the SE or higher. My experience with the system mimics the Eclipse Cross; lags behind the competition in terms of the interface and performance, but its a huge step forward from the previous system. The Outlander is one of the few models in the compact crossover class that can boast having three-rows to allow seating for seven. This seat is best reserved for small kids due to the limited amount of leg and headroom. Having the third-row also eats into cargo space - 10.3 vs. 33 cubic feet with the seats folded. Front and rear seating is fine. There’s enough padding to keep everyone comfortable on a long trip, and most passengers will be able to stretch out. Most Outlanders come equipped with a 2.4L four-cylinder engine producing 166 horsepower and 162 pound-feet of torque. This is paired with a CVT and the choice of front or Mitsubishi’s Super All Wheel Control. Step up to the GT to get a 3.0L V6 packing 224 hp and 215 lb-ft of torque. There’s also a PHEV option which I talk about more in this first drive piece. The 2.4 is serviceable around town with brisk acceleration and minimal noise. But take the Outlander on the highway or fill it up with people and cargo, and the 2.4 feels overwhelmed. Not helping is the CVT that will drone quite loudly when you plant your foot on the gas. Fuel economy is mid-pack with EPA figures of 24 City/29 Highway/26 Combined for the AWD version - front-wheel drive models see a one MPG improvement. My average for the week landed around 24. One area that I was surprised by the Outlander was the ride. Over the varied surfaces on offer in the Metro Detroit area, the Outlander’s suspension smoothed out various bumps. It doesn’t feel comfortable around corners, showing noticeable body lean and a disconnected steering system.  The Mitsubishi Outlander answers the oddly specific question of, “what is the cheapest three-row crossover I could buy?’ I can see why someone on a tight budget would consider one as the Outlander provides a lot of standard equipment, along with seating for seven at a low price. It doesn’t hurt that Mitsubishi’s 5 year/60,000 mile new car warranty does provide peace of mind for those who want a bit of security. But it does become a poor value the higher you climb in price. My Outlander SEL S-AWC tester starts at $29.095. With the optional SEL Touring Package (forward collision mitigation, adaptive cruise control, LED headlights, and a 710W Rockford Fosgate audio system) and carpeted floor mats, the price ballooned to $33,225 with destination. For that amount of cash, you get into a decently equipped Volkswagen Tiguan or Mazda CX-5. I know dealers put cash on the hoods - most dropping the cost to under $30,000, but it is still a tough sell. Disclaimer: Mitsubishi Provided the Outlander, Insurance, and One Tank of Gas
      Year: 2019
      Make: Mitsubishi
      Model: Outlander
      Trim: SEL S-AWC
      Engine: 2.4L MIVEC SOHC 16-Valve Four-Cylinder
      Driveline: CVT, All-Wheel Drive
      Horsepower @ RPM: 166 @ 6,000
      Torque @ RPM: 162 @ 4,200
      Fuel Economy: City/Highway/Combined - 24/29/26
      Curb Weight: 3,472 lbs
      Location of Manufacture: Okazaki, Japan
      Base Price: $29,095
      As Tested Price: $33,225 (Includes $995.00 Destination Charge)
      Options:
      SEL Touring Package - $3,000.00
      Accessory Carpeted Floors Mats and Portfolio - $135.00

      View full article
    • By William Maley
      Seven years ago, I drove the previous-generation Mitsubishi Outlander for a week-long review. There was a lot to like about the previous model as it featured distinctive shape, comfortable ride, and being somewhat fun to drive. But in other areas, the model fell a bit flat. Poor material choices, firm ride, and the optional V6 engine feeling slightly lackluster. I ended my review with this,
      “Mitsubishi has shown a new Outlander at the Geneva Motor Show earlier this year. Underneath the Outlander’s new sheet metal lies a new vehicle architecture and will have the choice between gas and plug-in hybrid power. The new Outlander also gets revised interior and new safety equipment. The question is will the new Outlander be able to fix the problems of the current one?”
      It has taken a fair amount of time to get my hands on the new Outlander. In that time, Mitsubishi has made a number of changes and updates to the Outlander lineup such as a revised exterior. Was it worth the wait?
      The Outlander’s shape is nothing too special with rounded corners, large glass area, and a set of 18-inch alloy wheels that comes standard on most models. For 2019, Mitsubishi has updated the Outlander’s front end with a new grille shape, headlights, and more chrome trim. It does help spruce up the design that has been with us since 2014. My only complaint is the dark silver paint on my tester. It makes the vehicle look like a giant blob. There isn’t anything that sets the interior apart from rivals. The design is somewhat plain, but material quality is quite surprising with an abundance of soft-touch materials. There is a fair amount of piano black trim, which does attract fingerprints. All Outlanders come with a 7-inch touchscreen running Mitsubishi’s latest infotainment system is standard. Those wanting Apple CarPlay and Android Auto need to step up to the SE or higher. My experience with the system mimics the Eclipse Cross; lags behind the competition in terms of the interface and performance, but its a huge step forward from the previous system. The Outlander is one of the few models in the compact crossover class that can boast having three-rows to allow seating for seven. This seat is best reserved for small kids due to the limited amount of leg and headroom. Having the third-row also eats into cargo space - 10.3 vs. 33 cubic feet with the seats folded. Front and rear seating is fine. There’s enough padding to keep everyone comfortable on a long trip, and most passengers will be able to stretch out. Most Outlanders come equipped with a 2.4L four-cylinder engine producing 166 horsepower and 162 pound-feet of torque. This is paired with a CVT and the choice of front or Mitsubishi’s Super All Wheel Control. Step up to the GT to get a 3.0L V6 packing 224 hp and 215 lb-ft of torque. There’s also a PHEV option which I talk about more in this first drive piece. The 2.4 is serviceable around town with brisk acceleration and minimal noise. But take the Outlander on the highway or fill it up with people and cargo, and the 2.4 feels overwhelmed. Not helping is the CVT that will drone quite loudly when you plant your foot on the gas. Fuel economy is mid-pack with EPA figures of 24 City/29 Highway/26 Combined for the AWD version - front-wheel drive models see a one MPG improvement. My average for the week landed around 24. One area that I was surprised by the Outlander was the ride. Over the varied surfaces on offer in the Metro Detroit area, the Outlander’s suspension smoothed out various bumps. It doesn’t feel comfortable around corners, showing noticeable body lean and a disconnected steering system.  The Mitsubishi Outlander answers the oddly specific question of, “what is the cheapest three-row crossover I could buy?’ I can see why someone on a tight budget would consider one as the Outlander provides a lot of standard equipment, along with seating for seven at a low price. It doesn’t hurt that Mitsubishi’s 5 year/60,000 mile new car warranty does provide peace of mind for those who want a bit of security. But it does become a poor value the higher you climb in price. My Outlander SEL S-AWC tester starts at $29.095. With the optional SEL Touring Package (forward collision mitigation, adaptive cruise control, LED headlights, and a 710W Rockford Fosgate audio system) and carpeted floor mats, the price ballooned to $33,225 with destination. For that amount of cash, you get into a decently equipped Volkswagen Tiguan or Mazda CX-5. I know dealers put cash on the hoods - most dropping the cost to under $30,000, but it is still a tough sell. Disclaimer: Mitsubishi Provided the Outlander, Insurance, and One Tank of Gas
      Year: 2019
      Make: Mitsubishi
      Model: Outlander
      Trim: SEL S-AWC
      Engine: 2.4L MIVEC SOHC 16-Valve Four-Cylinder
      Driveline: CVT, All-Wheel Drive
      Horsepower @ RPM: 166 @ 6,000
      Torque @ RPM: 162 @ 4,200
      Fuel Economy: City/Highway/Combined - 24/29/26
      Curb Weight: 3,472 lbs
      Location of Manufacture: Okazaki, Japan
      Base Price: $29,095
      As Tested Price: $33,225 (Includes $995.00 Destination Charge)
      Options:
      SEL Touring Package - $3,000.00
      Accessory Carpeted Floors Mats and Portfolio - $135.00
    • By Drew Dowdell
      GM released power figures today for the new inline 6-cylinder diesel engine that will be available in the Chevrolet Silverado and GMC Sierra.  Available at the same price as the 6.2 liter model, GM promises the new engine will change perceptions about diesel performance and refinement.  GM recently announced the delay of the 3.0-liter diesel until the 2020 model year due to emissions certification delays. 
      Paired with a 10-speed automatic transmission, the diesel produces an SAE-certified 277 horsepower and 460 lb-ft of torque with 95 percent of that torque being available at just 1,250 RPM.  Torque peak comes at 1500 rpm and peak horsepower at 3750 rpm.
      The powertrain is setup to offer diesel exhaust braking to help slow the vehicle when the truck is in tow-haul mode, limiting the number of applications of the brakes to save on brake wear. The engine also has a user selective start-stop function to save additional fuel in city driving. 
      2019 CHEVROLET SILVERADO 3.0L DURAMAX TURBO-DIESEL SPECIFICATIONS
      Type:
      Duramax 3.0L DOHC Turbo Diesel I6 
      Bore & Stroke (in. / mm):
      3.30 x 3.54 inches (84mm x 90mm)
      Block Material:
      Aluminum
      Cylinder Head Material:
      Aluminum
      Compression Ratio:
      15.0: 1
      Firing Order:
      1-5-3-6-2-4
      Valvetrain:
      Dual-overhead camshafts, four-valves per cylinder
      Air Delivery:
      Single variable-geometry turbocharger; intercooling system. 42.8-psi / 2.95 bar max boost
      Fuel Delivery:
      High-pressure, common-rail direct injection (36,250 psi / 2500 bar); electronic throttle valve
      Ignition System:
      Compression
      Max Engine Speed:
      5100 rpm
      Additional Features:
      Continuously variable oil pump; engine oil cooler, automatic stop/start, Active Thermal Management,
      Emissions Control:
      Low-pressure Exhaust Gas Recirculation (EGR); Selective Catalyst Reduction on Filter (SCRF)
      Horsepower
      (hp / kW @ rpm):
      277 / 204 @ 3750 (SAE certified)
      Torque
      (lb.-ft. / Nm @ rpm):
      460 / 624 @ 1500 (SAE certified)
      Manufacturing Location (of globally sourced parts)
      Flint, Mich.  
       
       
      Chevy Press release on page 2


      2020 CHEVROLET SILVERADO’S NEW, ADVANCED 3.0L DURAMAX TURBO-DIESEL REDEFINES EXPECTATIONS
      No-compromise engine delivers refinement, performance and efficiency
      2019-06-03
      DETROIT — The all-new 2020 Chevrolet Silverado’s available 3.0L Duramax inline-six turbo-diesel engine adds choice and versatility for full-size truck customers, offering class-leading torque and horsepower in addition to focusing on fuel economy and capability. It is the first-ever inline-six turbo-diesel offered in Chevrolet’s full-size light-duty trucks.
      Chevrolet engineers started with a clean-sheet design and developed an all-new engine that leverages the efficiency and refinement advantages of the inline six-cylinder architecture and incorporates advanced combustion and emissions technologies to optimize performance and efficiency. It is priced identically to the 6.2L V-8 as a $2,495 premium over a 5.3L V-8 model or $3,890 over a 2.7L Turbo model.
      “From the moment the engine is started, to its idle, acceleration and highway cruising, the 3.0L Duramax performance will change perceptions of what a diesel engine can offer in refinement,” said Nicola Menarini, director for Diesel Truck Engine Program Execution. “With advanced technologies that draw on global diesel expertise, it’s a no-compromise choice for those who want the capability and driving range of a diesel in a light-duty truck.”
      Available on LT, RST, LTZ and High Country models, the 3.0L Duramax diesel rounds out the new Silverado’s range of six propulsion choices, each tailored to suit customers’ needs for performance, efficiency, technology and value. It is rated at an SAE-certified 277 horsepower and 460 lb-ft of torque delivering 95 percent of peak torque at just 1,250 rpm. Peak torque is sustained from 1,500 rpm through 3,000 rpm, providing a powerfully smooth and satisfying driving experience.
      The 3.0L Duramax is paired with GM’s 10L80 10-speed automatic transmission, featuring a centrifugal pendulum absorber torque converter that reduces vibrations to improve smoothness, reinforcing its performance, efficiency and refinement. This combination also offers exhaust braking, which uses the diesel engine’s compression to help slow the vehicle, requiring fewer brake applications by the driver when in Tow Haul mode.
      Innovative Engine Technologies
      The inline six-cylinder architecture offers inherent efficiency and refinement, but the team expanded with smart technology choices to help improve efficiency and weight while optimizing the truck experience. A lightweight aluminum block and cylinder head reduce overall mass, and Active Thermal Management enhances efficiency and cold-weather warm-up. Ceramic glow plugs also help with shorter heat-up times and a quicker cold start, meaning the engine block heater is not needed until -22 degrees F.
      Towing is an important part of owning a truck, and customers can gain additional confidence thanks to the exhaust brake available in tow-haul mode. The water charge air cooler, coupled with low pressure EGR, reduces time to torque. The variable geometry turbocharger helps provide a greater balance of performance and efficiency, and an electronically variable intake manifold helps optimize performance across the rpm band.
      Inherently efficient and balanced
      Compared to a DOHC V-6, the inline-six architecture offers greater efficiency from the reduced friction of operating only two camshafts and their associated valvetrain components. The I6 configuration offers the perfect balance of primary and secondary forces, without the need for balancing shafts.
      “In addition to reduced friction, the architecture enables smooth operation,” Menarini said. “The new Duramax 3.0L elevates the 2019 Silverado with one of the most refined and efficient diesel engines in the segment.”
      Along with supporting elements such as a tuned air induction system and other noise-attenuating elements, the 3.0L Duramax delivers exceptional quietness and smoothness at all engine speeds.
      All-aluminum construction and tough rotating assembly
      The 3.0L Duramax cylinder block is made of a cast aluminum alloy that provides the strength required to support the high combustion pressures that occur within a diesel engine, while also offering an approximately 25 percent mass savings over a comparable cast iron engine block. Iron cylinder liners are used within the aluminum block to insure truck durability.
      There are seven nodular iron main bearing caps that help ensure the block’s strength under those high combustion pressures, while also enabling accurate location of the rotating assembly. A deep-skirt block design, where the block casting extends below the crankshaft centerline, also contributes to the engine’s stiffness and refinement. It’s complemented by a stiffness-enhancing aluminum lower crankcase extension attached to the main bearing caps.
      The rotating assembly consists of a forged steel crankshaft, forged steel connecting rods and hypereutectic aluminum pistons. The alloys in the respective castings for the rods and pistons make them lightweight and durable. Silicon is blended with the aluminum for heat resistance and tolerance within the piston cylinders, which enhances performance and makes the engine quiet.
      A thick piston crown — the top of the piston — and reinforced top ring add strength to support the tremendous cylinder pressures enabled by turbocharging and the engine’s high 15.0:1 compression ratio.
      DOHC Cylinder Head and Rear Cam Drive
      Overhead camshafts offer a direct, efficient means of operating the valves, while four valves per cylinder activated by maintenance-free finger followers with hydraulic lash adjusters increase airflow in and out of the engine. This arrangement is integrated on the Duramax 3.0L’s lightweight aluminum cylinder head, which is topped with a lightweight composite cam cover that incorporates the crankcase ventilation and oil separation systems.
      A pair of lightweight, assembled camshafts actuates 28.35 mm diameter (1.12-inch) intake and 24.55 mm diameter (0.97-inch) exhaust valves. The camshaft drivetrain is uniquely located at the rear (flywheel side) of the engine, for greater refinement and packaging considerations for the comparatively long inline-six. A crankshaft-driven chain drives the high-pressure direct-injection fuel pump, while a chain driven by the fuel pump drives both intake and exhaust camshafts. A smaller belt drives the variable flow oil pump from the crankshaft.
      Additional Technology Highlights
      Variable geometry turbocharging enables the Duramax 3.0L engine to deliver class-leading horsepower with minimal effect on overall efficiency. The system uses closed loop controlled vanes position and sophisticated electronic controls to automatically adjust boost pressure to the desired value based on engine running conditions and instantaneous power demand. The liquid-cooled turbocharger features a low-friction ball-bearing shaft and is mounted close to the exhaust outlet of the engine for quicker spool-up of the turbine and quicker light-off of the exhaust catalyst. A water-to-air intercooling system produces a cooler higher density air charge for greater power. Maximum boost pressure is 43,5 psi (300 Kpa) absolute.
      Low-pressure EGR: The Duramax 3.0L utilizes new low-pressure Exhaust Gas Recirculation to optimize performance and efficiency. The EGR system diverts some of the engine-out exhaust gas and mixes it back into the fresh intake air stream, which is drawn into the cylinder head for combustion. That lowers combustion temperatures and rates.
      Traditionally, EGR systems in diesel applications recirculate exhaust gases between the two high-pressure points, the exhaust manifold(s) and intake manifold. However, it generally requires efficiency-robbing assistance from the turbocharger or other supporting elements to achieve the pressure differential required for sufficient EGR flow rates.
      The new low-pressure system adds to the high-pressure system, supporting continual adjustment of exhaust backpressure for more efficient operation. It recirculates gases between the low-pressure points in the exhaust system (downstream of the particulate filter) and after the compressor inlet.
      When the low-pressure EGR is activated by an electronically controlled valve, the engine burns exhaust gas that has already passed through the particulate filter. That increases the turbocharger’s efficiency, which helps overall vehicle efficiency without deteriorating the rate of particulate matter emitted by the engine.
      A variable intake manifold offers dual air intake pathways for each cylinder. Electronically controlled flaps — one for each cylinder — shorten or lengthen the airflow to each cylinder. This optimizes the airflow into the engine and improves performance and responsiveness across the rpm band, particularly at lower engine speeds.
      A variable-pressure oiling system with a continuously variable-displacement vane oil pump enhances efficiency by optimizing oil pressure as a function of engine speed and load. With it, the oil supply is matched to the engine requirements rather than the excessive supply of a conventional, fixed-displacement oil pump. The engine uses low-friction Diesel Dexos 0W20 oil.
      Oil jets located in the block are employed for performance and temperature control. They target the inner core of the piston with an extra layer of cooling, friction-reducing oil. The jets reduce piston temperature, allowing the engine to produce more power and enhance long-term durability than engines without the technology.
      Active Thermal Management helps the engine warm up quickly to achieve and maintain its optimal engine temperature for performance and efficiency over the entire engine operating range. The system uses a three-actuator rotary valve system to distribute coolant through the engine in a targeted manner. It sends heat where it’s needed to warm up the engine to reduce friction and heat the passenger cabin or cools when needed for high-power operation. The Duramax 3.0L also features split cooling between the block and head.
      Common rail direct fuel injection of 2,500 bar (36,250 psi) helps generates class-leading horsepower and torque. The system’s pressure is generated by an engine-driven twin-piston pump sending fuel to solenoid-activated injectors with nine-hole nozzles that support precise metering of the fuel for a smooth idle and lower combustion noise. The fuel system is capable of multiple injections per combustion cycle — up to 10 times per injector — for more consistent and stable combustion performance that translates into smoothness and refinement, particularly at idle.   
      Electronic throttle valve: The Duramax 3.0L features an electronic throttle valve to regulate intake manifold pressure in order to optimize exhaust gas recirculation rates. It also contributes to a smooth engine shutdown via a more controlled method of airflow reduction.
      Ceramic glow plugs used in the Duramax 3.0L heat up more quickly and hotter than conventional metal-based glow plugs, helping the engine start and heat up more quickly in cold weather. The Duramax 3.0L achieves unassisted and assisted starting temperatures of -22 F (-30 C) and -40 F (-40 C) respectively.
      Stop/start technology helps optimize efficiency in city driving. The driver-selectable system shuts off the engine at stoplights and other stop-and-go situations. The engine automatically restarts when the driver takes their foot off the brake.
      ABOUT CHEVROLET
      Founded in 1911 in Detroit, Chevrolet is one of the world's largest car brands, doing business in more than 100 countries and selling more than 4.0 million cars and trucks a year. Chevrolet provides customers with fuel-efficient vehicles that feature engaging performance, design that makes the heart beat, passive and active safety features and easy-to-use technology, all at a value. More information on Chevrolet models can be found at www.chevrolet.com.
      # # #
      2019 CHEVROLET SILVERADO 3.0L DURAMAX TURBO-DIESEL SPECIFICATIONS
      Type:
      Duramax 3.0L DOHC Turbo Diesel I6 
      Bore & Stroke (in. / mm):
      3.30 x 3.54 inches (84mm x 90mm)
      Block Material:
      Aluminum
      Cylinder Head Material:
      Aluminum
      Compression Ratio:
      15.0: 1
      Firing Order:
      1-5-3-6-2-4
      Valvetrain:
      Dual-overhead camshafts, four-valves per cylinder
      Air Delivery:
      Single variable-geometry turbocharger; intercooling system. 42.8-psi / 2.95 bar max boost
      Fuel Delivery:
      High-pressure, common-rail direct injection (36,250 psi / 2500 bar); electronic throttle valve
      Ignition System:
      Compression
      Max Engine Speed:
      5100 rpm
      Additional Features:
      Continuously variable oil pump; engine oil cooler, automatic stop/start, Active Thermal Management,
      Emissions Control:
      Low-pressure Exhaust Gas Recirculation (EGR); Selective Catalyst Reduction on Filter (SCRF)
      Horsepower
      (hp / kW @ rpm):
      277 / 204 @ 3750 (SAE certified)
      Torque
      (lb.-ft. / Nm @ rpm):
      460 / 624 @ 1500 (SAE certified)
       

      View full article
    • By Drew Dowdell
      GM released power figures today for the new inline 6-cylinder diesel engine that will be available in the Chevrolet Silverado and GMC Sierra.  Available at the same price as the 6.2 liter model, GM promises the new engine will change perceptions about diesel performance and refinement.  GM recently announced the delay of the 3.0-liter diesel until the 2020 model year due to emissions certification delays. 
      Paired with a 10-speed automatic transmission, the diesel produces an SAE-certified 277 horsepower and 460 lb-ft of torque with 95 percent of that torque being available at just 1,250 RPM.  Torque peak comes at 1500 rpm and peak horsepower at 3750 rpm.
      The powertrain is setup to offer diesel exhaust braking to help slow the vehicle when the truck is in tow-haul mode, limiting the number of applications of the brakes to save on brake wear. The engine also has a user selective start-stop function to save additional fuel in city driving. 
      2019 CHEVROLET SILVERADO 3.0L DURAMAX TURBO-DIESEL SPECIFICATIONS
      Type:
      Duramax 3.0L DOHC Turbo Diesel I6 
      Bore & Stroke (in. / mm):
      3.30 x 3.54 inches (84mm x 90mm)
      Block Material:
      Aluminum
      Cylinder Head Material:
      Aluminum
      Compression Ratio:
      15.0: 1
      Firing Order:
      1-5-3-6-2-4
      Valvetrain:
      Dual-overhead camshafts, four-valves per cylinder
      Air Delivery:
      Single variable-geometry turbocharger; intercooling system. 42.8-psi / 2.95 bar max boost
      Fuel Delivery:
      High-pressure, common-rail direct injection (36,250 psi / 2500 bar); electronic throttle valve
      Ignition System:
      Compression
      Max Engine Speed:
      5100 rpm
      Additional Features:
      Continuously variable oil pump; engine oil cooler, automatic stop/start, Active Thermal Management,
      Emissions Control:
      Low-pressure Exhaust Gas Recirculation (EGR); Selective Catalyst Reduction on Filter (SCRF)
      Horsepower
      (hp / kW @ rpm):
      277 / 204 @ 3750 (SAE certified)
      Torque
      (lb.-ft. / Nm @ rpm):
      460 / 624 @ 1500 (SAE certified)
      Manufacturing Location (of globally sourced parts)
      Flint, Mich.  
       
       
      Chevy Press release on page 2


      2020 CHEVROLET SILVERADO’S NEW, ADVANCED 3.0L DURAMAX TURBO-DIESEL REDEFINES EXPECTATIONS
      No-compromise engine delivers refinement, performance and efficiency
      2019-06-03
      DETROIT — The all-new 2020 Chevrolet Silverado’s available 3.0L Duramax inline-six turbo-diesel engine adds choice and versatility for full-size truck customers, offering class-leading torque and horsepower in addition to focusing on fuel economy and capability. It is the first-ever inline-six turbo-diesel offered in Chevrolet’s full-size light-duty trucks.
      Chevrolet engineers started with a clean-sheet design and developed an all-new engine that leverages the efficiency and refinement advantages of the inline six-cylinder architecture and incorporates advanced combustion and emissions technologies to optimize performance and efficiency. It is priced identically to the 6.2L V-8 as a $2,495 premium over a 5.3L V-8 model or $3,890 over a 2.7L Turbo model.
      “From the moment the engine is started, to its idle, acceleration and highway cruising, the 3.0L Duramax performance will change perceptions of what a diesel engine can offer in refinement,” said Nicola Menarini, director for Diesel Truck Engine Program Execution. “With advanced technologies that draw on global diesel expertise, it’s a no-compromise choice for those who want the capability and driving range of a diesel in a light-duty truck.”
      Available on LT, RST, LTZ and High Country models, the 3.0L Duramax diesel rounds out the new Silverado’s range of six propulsion choices, each tailored to suit customers’ needs for performance, efficiency, technology and value. It is rated at an SAE-certified 277 horsepower and 460 lb-ft of torque delivering 95 percent of peak torque at just 1,250 rpm. Peak torque is sustained from 1,500 rpm through 3,000 rpm, providing a powerfully smooth and satisfying driving experience.
      The 3.0L Duramax is paired with GM’s 10L80 10-speed automatic transmission, featuring a centrifugal pendulum absorber torque converter that reduces vibrations to improve smoothness, reinforcing its performance, efficiency and refinement. This combination also offers exhaust braking, which uses the diesel engine’s compression to help slow the vehicle, requiring fewer brake applications by the driver when in Tow Haul mode.
      Innovative Engine Technologies
      The inline six-cylinder architecture offers inherent efficiency and refinement, but the team expanded with smart technology choices to help improve efficiency and weight while optimizing the truck experience. A lightweight aluminum block and cylinder head reduce overall mass, and Active Thermal Management enhances efficiency and cold-weather warm-up. Ceramic glow plugs also help with shorter heat-up times and a quicker cold start, meaning the engine block heater is not needed until -22 degrees F.
      Towing is an important part of owning a truck, and customers can gain additional confidence thanks to the exhaust brake available in tow-haul mode. The water charge air cooler, coupled with low pressure EGR, reduces time to torque. The variable geometry turbocharger helps provide a greater balance of performance and efficiency, and an electronically variable intake manifold helps optimize performance across the rpm band.
      Inherently efficient and balanced
      Compared to a DOHC V-6, the inline-six architecture offers greater efficiency from the reduced friction of operating only two camshafts and their associated valvetrain components. The I6 configuration offers the perfect balance of primary and secondary forces, without the need for balancing shafts.
      “In addition to reduced friction, the architecture enables smooth operation,” Menarini said. “The new Duramax 3.0L elevates the 2019 Silverado with one of the most refined and efficient diesel engines in the segment.”
      Along with supporting elements such as a tuned air induction system and other noise-attenuating elements, the 3.0L Duramax delivers exceptional quietness and smoothness at all engine speeds.
      All-aluminum construction and tough rotating assembly
      The 3.0L Duramax cylinder block is made of a cast aluminum alloy that provides the strength required to support the high combustion pressures that occur within a diesel engine, while also offering an approximately 25 percent mass savings over a comparable cast iron engine block. Iron cylinder liners are used within the aluminum block to insure truck durability.
      There are seven nodular iron main bearing caps that help ensure the block’s strength under those high combustion pressures, while also enabling accurate location of the rotating assembly. A deep-skirt block design, where the block casting extends below the crankshaft centerline, also contributes to the engine’s stiffness and refinement. It’s complemented by a stiffness-enhancing aluminum lower crankcase extension attached to the main bearing caps.
      The rotating assembly consists of a forged steel crankshaft, forged steel connecting rods and hypereutectic aluminum pistons. The alloys in the respective castings for the rods and pistons make them lightweight and durable. Silicon is blended with the aluminum for heat resistance and tolerance within the piston cylinders, which enhances performance and makes the engine quiet.
      A thick piston crown — the top of the piston — and reinforced top ring add strength to support the tremendous cylinder pressures enabled by turbocharging and the engine’s high 15.0:1 compression ratio.
      DOHC Cylinder Head and Rear Cam Drive
      Overhead camshafts offer a direct, efficient means of operating the valves, while four valves per cylinder activated by maintenance-free finger followers with hydraulic lash adjusters increase airflow in and out of the engine. This arrangement is integrated on the Duramax 3.0L’s lightweight aluminum cylinder head, which is topped with a lightweight composite cam cover that incorporates the crankcase ventilation and oil separation systems.
      A pair of lightweight, assembled camshafts actuates 28.35 mm diameter (1.12-inch) intake and 24.55 mm diameter (0.97-inch) exhaust valves. The camshaft drivetrain is uniquely located at the rear (flywheel side) of the engine, for greater refinement and packaging considerations for the comparatively long inline-six. A crankshaft-driven chain drives the high-pressure direct-injection fuel pump, while a chain driven by the fuel pump drives both intake and exhaust camshafts. A smaller belt drives the variable flow oil pump from the crankshaft.
      Additional Technology Highlights
      Variable geometry turbocharging enables the Duramax 3.0L engine to deliver class-leading horsepower with minimal effect on overall efficiency. The system uses closed loop controlled vanes position and sophisticated electronic controls to automatically adjust boost pressure to the desired value based on engine running conditions and instantaneous power demand. The liquid-cooled turbocharger features a low-friction ball-bearing shaft and is mounted close to the exhaust outlet of the engine for quicker spool-up of the turbine and quicker light-off of the exhaust catalyst. A water-to-air intercooling system produces a cooler higher density air charge for greater power. Maximum boost pressure is 43,5 psi (300 Kpa) absolute.
      Low-pressure EGR: The Duramax 3.0L utilizes new low-pressure Exhaust Gas Recirculation to optimize performance and efficiency. The EGR system diverts some of the engine-out exhaust gas and mixes it back into the fresh intake air stream, which is drawn into the cylinder head for combustion. That lowers combustion temperatures and rates.
      Traditionally, EGR systems in diesel applications recirculate exhaust gases between the two high-pressure points, the exhaust manifold(s) and intake manifold. However, it generally requires efficiency-robbing assistance from the turbocharger or other supporting elements to achieve the pressure differential required for sufficient EGR flow rates.
      The new low-pressure system adds to the high-pressure system, supporting continual adjustment of exhaust backpressure for more efficient operation. It recirculates gases between the low-pressure points in the exhaust system (downstream of the particulate filter) and after the compressor inlet.
      When the low-pressure EGR is activated by an electronically controlled valve, the engine burns exhaust gas that has already passed through the particulate filter. That increases the turbocharger’s efficiency, which helps overall vehicle efficiency without deteriorating the rate of particulate matter emitted by the engine.
      A variable intake manifold offers dual air intake pathways for each cylinder. Electronically controlled flaps — one for each cylinder — shorten or lengthen the airflow to each cylinder. This optimizes the airflow into the engine and improves performance and responsiveness across the rpm band, particularly at lower engine speeds.
      A variable-pressure oiling system with a continuously variable-displacement vane oil pump enhances efficiency by optimizing oil pressure as a function of engine speed and load. With it, the oil supply is matched to the engine requirements rather than the excessive supply of a conventional, fixed-displacement oil pump. The engine uses low-friction Diesel Dexos 0W20 oil.
      Oil jets located in the block are employed for performance and temperature control. They target the inner core of the piston with an extra layer of cooling, friction-reducing oil. The jets reduce piston temperature, allowing the engine to produce more power and enhance long-term durability than engines without the technology.
      Active Thermal Management helps the engine warm up quickly to achieve and maintain its optimal engine temperature for performance and efficiency over the entire engine operating range. The system uses a three-actuator rotary valve system to distribute coolant through the engine in a targeted manner. It sends heat where it’s needed to warm up the engine to reduce friction and heat the passenger cabin or cools when needed for high-power operation. The Duramax 3.0L also features split cooling between the block and head.
      Common rail direct fuel injection of 2,500 bar (36,250 psi) helps generates class-leading horsepower and torque. The system’s pressure is generated by an engine-driven twin-piston pump sending fuel to solenoid-activated injectors with nine-hole nozzles that support precise metering of the fuel for a smooth idle and lower combustion noise. The fuel system is capable of multiple injections per combustion cycle — up to 10 times per injector — for more consistent and stable combustion performance that translates into smoothness and refinement, particularly at idle.   
      Electronic throttle valve: The Duramax 3.0L features an electronic throttle valve to regulate intake manifold pressure in order to optimize exhaust gas recirculation rates. It also contributes to a smooth engine shutdown via a more controlled method of airflow reduction.
      Ceramic glow plugs used in the Duramax 3.0L heat up more quickly and hotter than conventional metal-based glow plugs, helping the engine start and heat up more quickly in cold weather. The Duramax 3.0L achieves unassisted and assisted starting temperatures of -22 F (-30 C) and -40 F (-40 C) respectively.
      Stop/start technology helps optimize efficiency in city driving. The driver-selectable system shuts off the engine at stoplights and other stop-and-go situations. The engine automatically restarts when the driver takes their foot off the brake.
      ABOUT CHEVROLET
      Founded in 1911 in Detroit, Chevrolet is one of the world's largest car brands, doing business in more than 100 countries and selling more than 4.0 million cars and trucks a year. Chevrolet provides customers with fuel-efficient vehicles that feature engaging performance, design that makes the heart beat, passive and active safety features and easy-to-use technology, all at a value. More information on Chevrolet models can be found at www.chevrolet.com.
      # # #
      2019 CHEVROLET SILVERADO 3.0L DURAMAX TURBO-DIESEL SPECIFICATIONS
      Type:
      Duramax 3.0L DOHC Turbo Diesel I6 
      Bore & Stroke (in. / mm):
      3.30 x 3.54 inches (84mm x 90mm)
      Block Material:
      Aluminum
      Cylinder Head Material:
      Aluminum
      Compression Ratio:
      15.0: 1
      Firing Order:
      1-5-3-6-2-4
      Valvetrain:
      Dual-overhead camshafts, four-valves per cylinder
      Air Delivery:
      Single variable-geometry turbocharger; intercooling system. 42.8-psi / 2.95 bar max boost
      Fuel Delivery:
      High-pressure, common-rail direct injection (36,250 psi / 2500 bar); electronic throttle valve
      Ignition System:
      Compression
      Max Engine Speed:
      5100 rpm
      Additional Features:
      Continuously variable oil pump; engine oil cooler, automatic stop/start, Active Thermal Management,
      Emissions Control:
      Low-pressure Exhaust Gas Recirculation (EGR); Selective Catalyst Reduction on Filter (SCRF)
      Horsepower
      (hp / kW @ rpm):
      277 / 204 @ 3750 (SAE certified)
      Torque
      (lb.-ft. / Nm @ rpm):
      460 / 624 @ 1500 (SAE certified)
       
    • By Drew Dowdell
      Chevy unveiled the 2021 Trailblazer today, filling a space between the Chevrolet Trax and Equinox in the lineup.  This follows the recent release of the Buick Encore GX that fills a similar but more premium space. 
      Picking up on styling from the larger Blazer and the Camaro, the Trailblazer takes an aggressive, sporty posture. Yes, there also will be an RS version, but no word yet on what powertrains will be available. 
      Chevy is finally going to start offering active safety features as standard, something the competition started doing a few years ago. The standard active safety features are Front Pedestrian Braking, Automatic Emergency Braking and Lane Keep Assist with Lane Departure Warning.  Optional will be Adaptive Cruise Control - Camera, Rear Park Assist and a High Definition Rear Vision Camera.
      The 2021 Trailblazer will enter dealerships in early 2020. 


      View full article
  • My Clubs

  • Reader Rides

About us

CheersandGears.com - Founded 2001

We ♥ Cars

Get in touch

Follow us

Recent tweets

facebook

×
×
  • Create New...